AUGMENTATION OF UNDER GROUND TANK NO 5 IN DUDHESHWER WATER COMPOUND UNDER WATER PROJECT DIVISION.

(4) Date of e-Tender (Technical Bid)

Municipal Commissioner Green Design & Engineering services Pvt.Ltd.

Ahmedabad Municipal Corporation 520-521, Shivalik Square,

Sardar Patel Bhavan Nr. Adani CNG Pump,

Ahmedabad – 380 001 Ramapir No Tekro, Old Vadaj,

Gujarat (INDIA) Ahmedabad-380027.

Phone : (091) – 79 – 25391811 Email- [email protected]

Website : www.egovamc.com

SUMMARY OF COST FOR DETAIL PROJECT REPORT

1 Augmentation of Under Ground Sump No 5

2 Mechanical Work

3 Eletrical Work

4 Instrumentation Work

5 Tools & Test Equipment & Office Furniture

6 5 Years O & M Works

TOTAL ESTIMATED AMOUNT RS

ADD (+/-) ABOVE OR BELOW Percentage %

7 TOTAL AMOUNT OF AFTER (ABOVE OR BELOW) RS (A)

7 TOTAL AMOUNT OF AFTER (ABOVE OR BELOW) RS (A)

8 Total Buyback Amount (B) To be Quoted Online

TOTAL AMOUNT OF TENDER RS (A-B) RS

TOTAL AMOUNT OF TENDER RS (A-B) RS

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As per of total Job, Rs.

10,57,49,754.00/- (i.e. Total Estimated Amount Cost w/o buyback value) .

2. Bidder must quote Minimum Rs. 18,40,000/- OR more for buyback items as per Annexure-1 in Scope of

Work, Section- A.3.8 separately online at Sr. 8 as indicated above. Bidder to note that net amount quoted by

the bidder shall be determined by deducting the total amount of buyback quoted by bidder from the amount

the bidder shall be determined by deducting the total amount of buyback quoted by bidder from the amount

quoted for works as above at Sr. No. 7 and the net amount so derived shall be considered for Price

Evaluation purpose to determine lowest bid.

3. Bidder shall quote for buyback items as per Annexure-1 in Scope of Work, Section A-3 online. Bidder to

note that net amount quoted by the bidder shall be determined by deducting the total amount of buyback

note that net amount quoted by the bidder shall be determined by deducting the total amount of buyback

quoted by bidder from the amount quoted for works as above and the net amount so derived shall be

considered for price evaluation purpose to determine lowest bid.

Bidder’s Stamp and Initials

AHMEDABAD MUNICIPAL CORPORATION

AUGMENTATION OF UNDER GROUND TANK NO 5 IN DUDHESHWER WATER

COMPOUND UNDER WATER PROJECT DIVISION

Description Rate

Item Unit Without

Quantity Amount

1 Demolition of Brick work & stone 75.00 Cmt 544.95

masonry including stacking of serviceable

materials and disposal of unserviceable

materials with all lead and lift. (i) In

2 Demolition and disposal of unserviceable 160.00 Cmt 603.23

materials with all lead and lift.(i)

Unreinforced cement concrete

3 Demolition and disposal of stacking of 290.00 Cmt 1,047.38

serviceable materials and disposal of

unserviceable materials with all lead and

4 Supplying Electric breakar machine for 10.00 Shift 1,071.43

RCC slab or Asphalt demolishing work on

site by using operator, fuel, power supply

etc. complete as directed.(no payment

should be allowed for non working

condition of machinary and for pipeline

excavation and M.H. work.allowed only

for break down work)

5 Excavation for foundation for loose and -

soft soil including sorting out and stacking

of useful materials and disposing of the

excavated stuff up to 50 meter lead.

c) From 3 to 5.0 m. 65.00 cmt 141.11

6 Extra over item no. 2 above for lead from 1,760.00 cmt 408.41

50 m to 5 Kms. as directed.

7 Extra over item no. 2 above for lead from 440.00 cmt 454.71

5 Kms. to 10 Kms. as directed.

8 Filling with available excavated earth 660.00 cmt 129.10

(excluding rock) in trenches, plinth, sides

of foundation in layers not exceeding

cm in depth consolidating each deposited

layer by ramming and watering.

9 Extra rate over item of excavation of earth 500.00 cmt 17.86

if excavation is to be done in wet.

condition without resorting to pumping but

incl. of bailing out of water. (Based on

Previously approved rate by C E sir )

10 Providing and casting in situ C.C. in grade 195.00 cmt 4,732.00

M-15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per

Table 9 of IS456 2000 in masses by weigh

batching ) using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC

work, including scaffolding centering,

form work, needle vibrated

consolidation, curing comp. (excluding

cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering

etc. comp. for structure for other than

water retaining. Footing (without form

11 Providing and casting in situ C.C. in grade 20.00 cmt 4,906.00

M-15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per

Table 9 of IS456 2000 in masses by weigh

batching ) using granite, quartzite trap

metal of size 6 mm to 20 mm for RCC

work, including scaffolding centering,

form work, needle vibrated

consolidation, curing comp. (excluding

cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering

etc. comp. for structure for other than

water retaining. Footing (with form work)

12 Providing and cast in situ C.C. in grade M- -

30 proportions of ingredients as per mix

design by weigh batching using granite,

quartzite trap metal of size 12 mm to

mm and or 6 mm to 12 mm including

scaffolding centering formwork, needle

vibrated consolidation, curing and

hydraulic testing etc. complete (excluding

cost of reinforcement) with centering and

shuttering/deshuttering etc. camp. up to

meter height /depth Av. G.L.for all water

retaining structures

a) R.C.C. Raft and footings with shuttering 495.00 cmt 8,213.00

b) R.C.C. walls 355.00 cmt 8,083.00

c) R.C.C. Beams & staircase 120.00 cmt 8,486.00

d) Columns 70.00 cmt 9,317.00

e) Top Slab of Sump 195.00 cmt 8,213.00

13 Providing and cast in situ C.C. in grade M- -

25 proportions of ingredients as per mix

design by weigh batching using granite,

quartzite trap metal of size 12 mm to

mm and or 6 mm to 12 mm including

scaffolding centering formwork, needle

vibrated consolidation, curing and hydrulic

testing etc. complete (excluding cost of

reinforcement) with centering &

shuttering/ deshuttering etc. for all water

retaining structures.

a) R.C.C. footings & Raft with shuttering 35.00 cmt 8,077.00

b) R.C.C. Verticle Wall 5.00 cmt 7,936.00

c) R.C.C. Columns 55.00 cmt 9,195.00

d) R.C.C. beams, lintels and bracket for 135.00 cmt 8,347.00

gantry or chain pully blocks, plinth beams,

tie beams, weather shed, staircase etc.

e) R.C.C. slabs and platform 145.00 cmt 8,077.00

14 Providing and cast in situ C.C. in grade M- -

20 ( proportions as per mix design or as

per table of IS456 2000 in masses by

weigh batching) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC

Work including scaffolding centering

formwork, needle vibrated consolidation,

curing complete up to 6 meter depth or

height (excluding cost of reinforcement

and neat finishing) with centering and

shuttering/ deshuttering etc. complete for

structure other than water

retaining.(Without W.P. Chemical)

a) R.C.C. footings & Raft 110.00 cmt 5,520.00

b) R.C.C. Verticle Wall 10.00 cmt 6,779.00

c) R.C.C. Columns 14.40 cmt 7,363.00

d) R.C.C. beams, lintels and bracket for 9.00 cmt 6,722.00

gantry or chain pully blocks, plinth beams,

tie beams, weather shed etc.

e) R.C.C. slabs and platform 10.00 cmt 6,504.00

15 Supply cutting, Bending, Binding and 176.50 MT 77,504.00

placing in position steel as per plan and

design and as per ISS 2502 including cost

of steel and binding wire for reservoirs/

structures only including lift up to 6 meter

height or depth below G.L. for all

Deformed(TMT)bars confirming to

relevant IS Fe-500 grade for all diameters.

16 Extra Over Rate Item No 11 for TMT 35.00 MT 1,073.00

FE500 replaced over CRS TMT FE 500 in

UG Sump Slab and Beam

17 Brick work using common burnt clay 25.00 cmt 4,011.66

building bricks having crushing strength

not less than 35kg / Sq. C. M. in ramp,

steps and Foundation & Plinth in cement

morter1:5 (1 cement : 5 coarse sand)

including racking out joints, curing,

scaffolding required if any etc. complete,

as directed. (B) Conventional

18 Brick masonry in cement mortar (1:5) 290.00 cmt 4,091.84

using common burnt clay building bricks

having crushing strength not less than

35kg/csmt including scaffolding,curing,

etc. complete for walls, parapets, etc. at all

19 Providing Half brick masonry in common 50.00 cmt 593.90

burnt clay building bricks having crushing

strength not less than 35 Kg/csmt in C. M.

1:4 for partition work including raking out

joints, curing, scaffolding etc. complete as

directed for any height.

20 Interior plain faced 15 mm thick cement 1,580.00 smt 295.90

plaster (1:3) with floating coat of neat

cement slurry on Underneath Ceiling of

top of UG tank where specified on

drawings at all levels including

scaffolding, curing, etc. complete. This

rate shall include moulding where

specified. The rate shall include 2%

approved quality water proofing

compound (by weight) of cement.

21 Providing and applying 20 mm thick 1,915.00 smt 202.00

inside cement plaster with water proofing

agent on inside of sump consisting of

mm thick backing coat of CM 1:2 (1

cement : 2 sand) and 8 mm thick finishing

coat of CM 1:1 (1 cement : 1 sand) etc.

complete including necessary curing,

scaffolding required if any etc. complete.

22 Providing and applying 15 mm thick 2,600.00 Smt 222.56

cement plaster in single coat on brick work

with floating coat of net cement slurry for

interior plastering of pumphouse and

outside plastering of sump upto finished

even and smooth in Cement motar 1 : 3 (1

cement : 3 sand) including racking out

joint curing, scaffolding required if any,

with necessary cement finishing etc.

complete as directed.

23 20 mm thick sand faced cement plaster on 1,690.00 Smt 297.68

walls upto height 10 metres above ground

level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and

mm thick finishing coat of C.M. 1:1 (1-

cement : 1 sand) etc. complete. (including

around Pump house)

24 White washing with lime on wall surfaces 100.00 Smt 12.29

(two coats) to give an even shade

including thoroughly booming the surface

to remove all dirt, dust, mortar drops and

other foreign matter etc. complete.

25 Extra over above item for every subseqent 50.00 Smt 5.67

coat of white washing with lime on wall

26 Finishing wall with weather proof exterior 1,690.00 Smt 113.40

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to removal

dirt, and remains of loose powdered

materials.etc complete

27 Distempering (two coats) with oil bound 1,775.00 Smt 76.08

distemper of approved brand and

manufacture and of required shade on

undecorated wall surface to give an even

shade, over and including a priming coat

with distemper primer of approved brand

and manufacturer after thoroughly

brushing the surface free from mortar

dropping and other foreign matter also

including preparing the surface even and

sand papered smooth.

28 Applying two coats of Birla(white cement 1,775.00 Smt 40.19

based) or Asian (acryliclapy putty) or

equivalent & two coats of primer of

approved brand and manufacture on new

wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matte rand sand papered smooth.

29 Paint on soffit of tank roof slab with 2 1,740.00 smt 143.00

coats of bituminous paint including

cleaning the surface by scrapping and air

blowers as directed by engineer in-charge.

30 Providing and laying one layer of bitumen 1,025.00 smt 17.00

kraft paper conforming to IS : 1398 of

approved make and quality.

31 Providing 100 mm x 100 mm size vata in 380.00 Rmt 23.45

cement mortar (1:1) including smooth

finish, curing, etc. complete.

32 Providing 100 mm x 100 mm size vata in 230.00 Rmt 44.00

cement concrete (1:2:4) including water

proofing compounds, smooth finish,

curing, etc. complete for the internal side

of the sump, pump house

33 Providing and laying cement concrete -

flooring 1:2:4 (1 cement : 2 coarse sand :

graded stone aggregate 20 mm nominal

size) including water proofing compound

finishing with a floating of neat cement

slurry etc. complete laid in one layer

finished including necessary curing at

bottom of sump.

Average 50 mm thick 1,675.00 smt 348.08

34 Providing and laying Trimix with 1,130.00 smt 48.21

dewatering machine and floater machine

on constructed RCC work including cost

of machine and labour etc. compact

35 Providing and laying polished Kota stone 590.00 smt 1,085.48

slab flooring over 20 mm (average) thick

base of cement mortar 1:6 (1 cement :

coarse sand) laid over and jointed with

grey cement slurry including rubbing and

polishing etc. complete at LT & HT,

office room & Chlorine room. 30 mm

36 Providing and laying polished Kota stone 25.00 smt 1,176.03

slab 25 mm thick in riser of steps, skirting

Dedo & pillars laid on 10 mm thick

cement mortar 1:3 (1 cement : 3 coarse

sand) and jointed with grey cement slurry

including rubbing and polishing etc.

37 Kota stone in Jams and Sills of the 60.00 smt 1,107.00

window and ventilation and Door with one

molding as directed by Engineer-in-

38 Providing and fixing window having 55.00 smt 1,568.27

extruded aluminum Colour anodized

section frame main outer size 95mm x

24mm x 1.17 mm (of Jindal Section no :

2459 @ wt. of 0.738 Kg/mt), horizontal

Three track member size 92mm x

mm x 1.30 mm (of Jindal Section no.

8688, @ Wt. 1.07 Kg/mt), vertical member

of size 92mm x 31.75mm x 1.50 mm (of

Jindal Section no. 8933, @ Wt.

Kg/mt.) with sliding shutters of horizontal

member size 40mm x 18mm x .29 mm (of

Jindal section no. 8947 @ wt.

Kg/mt.) vertical member of size 40mm x

18mm x 1.29mm (of Jindal Section no.

8949 @ wt. of 0.456 Kg/mt with 5 mm

thick transparent bronze colour tinted float

glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details

39 Providing and fixing standared extruded of 23.00 smt 1,163.92

alluminimum section of size 63mm x

38.10mm x 1.2mm (Jindal Section :

@ Wt. 0.643 Kg/mt.) with colour powder

coated alluminium frame for ventilation

with 5 mm thick frosted glass as details etc

complete for Ventilation

40 Providing & fixing in position aluminium 55.00 smt 1,750.00

grill with 15 micron natural matt brush

finish anodised as per over all size shown

on the drawings and aluminium sections of

approved make conforming to IS:733 and

IS : 1285, made out of DG - 104 design (

Jindal or equivivelent ) fixed with required

size F channel, rawl plugs and screws or

with fixing clips, or with expansion hold

esters including necessary filling up of

gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt etc. and

aluminium snap beading for glazing /

panelling, C. P.brass/stainless steel screws,

including standard anodised aluminium

fittings and fixtures of approved make and

of adequate size and in adequate numbers,

including cost and fixing of fixtures etc.

complete as per detailed drawings with all

lead and lifts.

41 Providing precast cement concrete jali or 15.00 smt 640.20

louvers 40 mm thick 1:2:4 mix (1 cement :

2 coarse sand : 4 graded stone aggregate

mm nominal size) reinforced with 1.6 mm

dia. Mild steel wire including roughening,

cleaning, fixing and finishing in CM 1:3

and curing, painting complete

42 Supplying, fixing Push and Pull, 20 gauge 20.00 smt 4,277.00

rolling shutter of approved make for the

sizes indicated on drawings including hood

cover, channel sliding assembly, helical

coil springs, brackets, interlocking latches,

locking arrangements, painting with

coats of enamel paint over one coat of

approved primer paint etc. complete.

Shutters having width below 3.5M (gear

43 Grouting with 1:3 cement, sand mortar for 60.00 cmt 4,536.00

anchor bolt pockets, machine bases, pipe

sleeves, pockets holes, etc. including

roughening and cleaning of concrete

surfaces, curing, etc. complete.

44 Drilling holes for grouting -

Drilling 40 mm Dia. Holes in 30.00 Rmt 458.04

masonry/concrete structures with

providing and fixing 500 mm long GI

Pipeline for pressure grouting including

supply of material, machineries and labour

cost etc. complete.

45 Supplying, cleaning, cutting, bending, 7,200.00 kg 82.50

welding, fabricating, erecting, structural

steel in position irrespictive of location

and levels as per drawings including

handling and transport, etc. complete

including applying two (2) coats of primer

red oxide and two (2) coats of approved

46 Providing and fixing precast reinforced 5.00 cmt 6,504.00

cement concrete trench covers, hatch

covers, etc. of Class M-20 with 20 mm

downgraded coarse aggregate excluding

reinforcement but including shuttering,

vibrating, curing, all handling, transporting

47 Providing and fixing in position 150 mm 20.00 No. 2,576.00

diameter and 610 mm heigh CI air

ventilators including fixing of jali grating

and cover and painting the same. (wt.

48 Providing & Fixing F.R.C. MH seat cover 20.00 No. 1,633.93

incl. carting to the work site etc. comp.

Directed. (Based on rate of central store)

FRC medium duty Chamber seat cover

(FRC) cover 706 x 556 x 50 mm

rectangular cover frame size 600 x

mm clear opening outer size 816 x 666 x

100 mm (MD-10) cover for dewatering

49 Providing and fixing in position 6.0 m 1.00 No. 10,627.00

high aluminium water level indicator

made of 230 mm width and 4 mm thick

aluminium sheet fixed on angle 50 X 50 X

6 mm frame and bracing and fixing in

concrete base as per specification or as

directed by Engineer-in-Charge

50 Providing and fixing 50 mm dia and 300 115.00 No. 40.00

mm long PVC pipe/spout in RCC beams

of U.G. Tank roof slab and RCC

peripheral wall on slab top. Rate shall

include carting/cutting in required size and

shape etc. complete as directed.

51 Providing and fixing 40mm dia. GI pipe 50.00 Rmt 1,397.00

medium weight quality as openable type

with angle iron support at 1.5 m c/c using

75 x 75 x 10 mm angles, 1 m long with

three rows of pipes as railing including

necessary painting with two coats of

approved quality oil paint over one coat of

approved primer including necessary

welding, bolting required, if any.

52 Painting two coats including priming coat 100.00 Sq.M. 121.28

on new steel & other metal surfaces with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

of all dirt, dust, other foreign matter.

53 Providing,Supplying and fixing ISI mark -

G.I pipes with coupling of following class

and diameter including all taxes,

insurance, transportation, freight charges,

octroi, inspection charges,

loading,unloading, conveyance to

departmental stores, stacking etc. complete

(IS:1239) Medium Duty.

a) 25 mm dia GI pipe sleeves 5.00 Rmt 193.00

b) 32 mm dia GI pipe sleeves 5.00 Rmt 249.00

c) 50 mm dia GI pipe sleeves 5.00 Rmt 387.00

d) 80 mm dia GI pipe sleeves 5.00 Rmt 625.00

e) 100 mm dia GI pipe sleeves 5.00 Rmt 898.00

54 Providing and fixing PVC pipe of 25.00 Rmt 349.00

6Kg./csmt of 140 mm dia for rain water

55 Providing, Fabricating & fixing WDS 1.00 No. 15,640.00

name board of Size 3.00mX0.60 made

from ISA 50X50X5 mm M.S angle with

Nos supports at back side vertical member

of angle size 1.1m ht incl 0.3 m hold fast

inserted in compound wall with necessary

dismantling and fixing with cement

concrete. The rate shall also incl 16 g M.S

sheet of size 3.00X0.60 mt incl ACP Sheet

with Printing letter with AMC logo as

directed by EIC. rate shall incl painting

board with 2 coat of enamal paint over one

coat of anti-corrosive primer.

56 Providing, Fabricating & fixing caution 1.00 No. 7,900.00

board of size 1.50m x 0.60m made from

ISA 40 x 40 x 5 mm MS angle with 2 nos.

supports at back side vertical member of of

angle size 1.10m height (inclu. 0.30m hold

fast inserted in compound wall with

necessary dis-mantling and fixing with

cement concrete. The rate shall also

include 14g MS sheet of size 1.50mt x

0.60mt incl ACP Sheet with Printing letter

with logo as directed by EIC. rate shall

incl painting board with 2 coat of enamal

paint over one coat of anti-corrosive

57 Providing and fixing Radium sign board of 1.00 Nos. 7,400.00

size 3.00mt x 0.60 mt made from ACP

sheet with writing coloured reflected letter

of WDS name board with necessary clamp

for hanging board at pump house etc.

comp as directed by EIC

58 Providing throating or plaster drip and 320.00 Rmt 41.25

moulding as instructed by Engineer in

59 Providing and laying chequered precast 20.00 smt 522.78

concrete tiles 22 mm thick with

aggregates of size up to 6 mm in treads of

steps and landing of sump of 20 mm thick

bed of cement mortar 1:6 with neat

cement slurry with pigment to match the

shade of tiles.

Providing and fixing of self supported 540.00 Smt 2,150.00

roofing system with proper overlapping

and seaming b/w different sheets without

making holes preventing the overturning

the roof by wind addition made of from

superior quality, structural grade steel

base metal width 912 mm steel grade:

Grade D and thickness 1.30 mm BMT,

1.35 mm TCT with tolerance of +/-

0.04mm , colour coated Galvalume steel

only. Design, supply & fabrication of self

supported single span arch roof fabricated

from mechanically seamed manufactured

by imported machines to profiles of colour

coated Galvalume Cold Rolled Structural

Steel coils as per standard ASTM A792 M,

XMA3402, Coating-AZM-150 Tata

Bluescope Steel Limited India with

Reverse Branding every 1 meter along the

length with SDP coating. The rate of item

is including fitting as per standard

specification and details drawing &

directed by Engineer in Charge.

61 Providing & fixing in position 40 mm dia. 2.00 Nos. 6,364.00

UGWTS valve controlling MS rod (5.5

mtr) of for operation of valve including T-

shape rod at Top 0.60 mt. length fix at rod

centre and extra top at bottom including

coats of bituminous paint and making

holes etc. completed with 1 mt. Above

finish slab level of tank.

62 Providing and laying broken China Mosaic 100.00 Smt 739.89

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid

over Cement mortar 1:3 to plain or slope

and to be tempered to bring mortar crème

out upto surface using white cement

including rounding of junctions and

extending them upto 15 cm. along the

wall, clearing with water and oxalic acid

etc. as directed.

63 Manufacture,Supply & Delivery of Ductile -

Iron Flange socket spigot

bends,tees,reducers,or any other specials

ass per BS-EN-545/1995 Class-Aseries

K12 Suitable for use with DI pipes

manufactured as per IS:8392/1994

delivery of specials is to be made to Store

or site of works anywhere in gujarat

including all taxes, loading,unloading

,carting,stacking, insurance , inspection

charges,octroi etc. complete.Bends (Both

side Flange ended)

(b) 350 mm. dia.& Above Pipe 1,000.00 kg 158.00

64 (1) Puddle pipe with flanges at both -

(2) Puddle pipe with one End flanges -

65 (I) Ring flanges -

(b) Above 300 mm dia. 500.00 Kg 158.00

(II) Blank Flanges -

(b) Above 300 mm dia. 500.00 Kg 158.00

66 providing and Fixing PVC coated Step in 10.00 Nos 66.96

Chamber as directed by Engineer in

67 Providing & Supplying JCB Machine on 10.00 Hr 535.71

rental basis in case of emergency situation

and break down type work & also during

unavoidable condition as per instruction of

engg.incharge , rate includes all nece.

shifting, fuel and operating charges and

stacking of useful & non-useful materials

separately up to store. (No payment should

be allowed for non working condition of

machinery and for pipe line excavation

and laying work) ( Based on Previously

approved rate by C E sir )

68 Providing the site grading to the site by 98.00 smt 2.50

excavation / earth fill as per lines and

levels and grading the finished ground

level with surplus imported earthfill in dry

condition, as directed by the engineer-

incharge etc complete.

69 Providing & laying rubble below raft 240.00 cmt 1,250.00

foundation including carting to the work

site , rimming consolidating & dressing

etc, Complate as per Engineer in-charge

70 Making hole of following dia pipe in RCC. -

Rate includes electrical hand operated

braker set, Gas cutting set with all

required equipment & removing debris etc.

71 Making 15 mm groove in RCC work on 500.00 Rmt 26.79

road and finished it good incl. all labour

charges etc comp as directed.

72 Constructing Bombay Pattern Type Catch 10.00 Nos 3,125.00

Pit of size 0.60 x 0.60 depth up to 1 mt

including excavation, B.B.C.C. (1:5:10),

23 cms thick brick maso. wall in the prop.

of CM (1:6) with 40 mm thick IPS

flooring in the prop M15 at bottom and

mm thick cement plaster inside the catch

pit in the proportion of CM (1:3) with out

jali etc. comp. as directed. (As per R.A.

Based on Building SOR 2015-16)

73 CatchPit Jali Fixing P/F FRC catch pit jali 10.00 Nos 1,383.93

with frame 600mm x 600mm clear

opening etc. comp.. As directed by

engineer in charge. (Based on Central

74 Constructing Slab type M.H. Chamber of 5.00 Nos 10,177.68

the following size including excavation,

refilling, brick bats cement concrete

(1:5:10) of thickness 15 C.M., CC Channel

(1:2:4) of thickness 10 C.M., finished

mm thick cement plaster 12 14 inside &

outside (Only for shaft) in CM 1:3,

finishing with cement slurry, P/F 4 mm dia

M.S.Steel HDPE coated steps 35 cm c/c at

35 cm staggered in masonary CM 1:5,

RCC Slab in CC 1:1.5:3 of thickness

C.M., including Cantering &

reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the

cost of Manhole seat cover etc..completed.

of Size 1.00 X 1.40 meter (Inside

Clear,M.H. length should be parallel to the

flow, for pipe dia <= 800 mm) (Based on

Drainage SOR 2009-10)1.00 to 2.00 meter

depth, (Slab at Ground level) for

Rainwater Collection Chamber

75 Constructing Chamber of following size 5.00 Nos 2,261.61

including excavation, refilling, BBCC

(1:5:10) for foundation, C.C.Channel

(1:2:4), finished 15 mm thick cement

plaster inside in CM 1:3, finishing with

cement slurry, Brick masonary in CM 1:5

& excluding the cost of chamber seat

cover etc..completed. (Based on Drainage

SOR 2009-10) 0.60 X 0.45 mt. size Inside

Clear, Depth from 0.0 to 0.90meter for

pipe dia <=150 mm. chamber for

76 Providing & Fixing F.R.C. MH seat cover 5.00 Nos 1,633.93

incl. carting to the work site etc. comp.

Directed. (Based on rate of central store)

FRC medium duty Chamber seat cover

(FRC) cover 706 x 556 x 50 mm

rectangular cover frame size 600 x

mm clear opening outer size 816 x 666 x

100 mm (MD-10) cover for dewatering

77 Providing F.R.C. MH seat cover incl. 5.00 Nos 2,125.00

carting to the work site etc. comp.

Directed. (Based on rate of central store)

F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover :

728mm ø & 100 mm thick circular cover,

35.00 MT load design, 100x2mm MS flat

allround, 16mm ø plain round bar for

lifting the cover & should be fitted with

plastic cups. Frame : 560 mm ø clear

opening, outer size- 888x888x175 mm. On

the upper periphery of frame 25 x 3 mm

wide MS flat should be well embed in

concrete to protect the edges of frame.

FRC E.H.D.-35 manhole cover & frame

described as above

78 Making connection to the ex.M.H.in 3.00 Nos 1,339.29

running sewer incl. Dewatering and other

required machinery etc. of following dia

pipes at any convenient time. All damaged

work shall be well repaired as per

instructions. etc..complete. (Based on

Drainage SOR 2009-10)

a) 150 mm to 300 mm dia.

connection for dewatering

79 Manufacturing, supplying, loading, -

unloading to work site, lowering trenches,

laying and jointing RCC pipes following

class with Socket and spigot joints as per

IS 458-2003 including EPDM Rubber ring

as per IS 5382-1985 etc. Comp.As

Directed by Engineer in charge RCC NP3

Supplying and fixing of 300 mm-L x 150 130.00 Rmt 350.89

80 mm-B x 380 mm-Kerb block for Footpath

in M-20 grade using 20 mm nominal size

black trap aggregate of Sevaliya/Timba or

equivalent quality for pre-cast blocks,

reasonably exposed finish/ formwork

mould with well equipped with vibratory

system for kerb stones of approved design

including curing, etc. complete, including

the cost of formwork etc. complete. The

rate shall also include necessary cutting of

asphalt, fixing the Kerb stones in line and

level on 5 cm thick sand bedding with

necessary equipments and materials. The

rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones.

Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete

Bituminous concrete / C.C. mixed in

proper position to flush with the road

surface as directed by Engineer in change

to form a portable mixture.

81 Filling in plinth with sand under floors 50.00 Cmt 455.63

incuding watering, ramming, consolidation

and dressing complete

82 Providing and Laying of Rubber Moulded 350.00 smt 383.04

Paver Block Grey/Coloured 60 mm thick,

M-35 Grade of any size ; shape (Usually

Uni-Paver Blocks) using black trap good

quality aggregate of 20 mm nominal size

for footpath, parking areas, service lanes

and other areas as mentioned in the

drawing / instruction of engineer in charge.

Cost includes formworks using rubber

mould, Rate providing and laying paver

blocks as per required grading and

specification. The paver block shall be

mechanically compacted. The work of

paving blocks shall be executed in line and

level by skill mason of flooring work only.

It should be laid in such a way that the no

cutting of the paver block to be necessary.

If cutting of paver block necessary then it

should be cut by machine only and carting.

The finished surface of the paver block

shall have reasonably good, plain finished.

Paver blocks shall be compacted and shall

be relaid if necessary. Gravel or such type

of materials shall not be allowed for

production. Laying on 5 cms thick sand

bedding. and Laying of Rubber Moulded

Paver Block Grey/Coloured 60 mm thick,

M-35 Grade of any size ; shape (Usually

Uni-Paver Blocks) using black trap good

quality aggregate of 20 mm nominal size

for footpath, parking areas, service lanes

and other areas as mentioned in the

drawing / instruction of engineer in charge.

Cost includes formworks using rubber

mould, Rate providing and laying paver

blocks as per required grading and

specification. The paver block shall be

mechanically compacted. The work of

paving blocks shall be executed in line and

level by skill mason of flooring work only.

It should be laid in such a way that the no

cutting of the paver block to be necessary.

If cutting of paver block necessary then it

should be cut by machine only and carting.

The finished surface of the paver block

shall have reasonably good, plain finished.

Paver blocks shall be compacted and shall

be relaid if necessary. Gravel or such type

of materials shall not be allowed for

production. Laying on 5 cms thick sand

83 Writing letter or figures on any surface 10.00 Per 3.15

with black japan paint (stops, comas, Letter

hyphens and the like not to be measured Per

and paid for separately) (i) Block Cm/Ht

(Letters/Figures) (Per 10 Letter pet

84 Providing in line level plumb, fabricating 35.00 Rmt. 449.00

and fixing three row horizontal barbed

wire fencing and punched tape concertina

coil of 9 turns per meter of 610 mm

diameter fixied with clips on top of the

angle iron posts. The punched tape

concertina coil having sharp barbs at every

25 mm spacing shall be 0.5 mm thick and

19 mm width and weighting 13 Kg./100

mtr. (Average) as per manufacture's

specification. The rate shall also include

providing and fixed 1.20 mt. total long MS

angle 40 x 40 x 6 mm @ 3.00 mt. c/c

spacing embedded in RCC column, angle

posts shall be painted with one coats of red

oxide and two coats of enamel paint of

approved quality at top of compound wall.

85 Labour charges for writing of Capital letter 1.00 No 381.00

"AMC" in green plaster of 30 cm height,

5 mm thick and 12 mm embossed as per

given detail in outside of compound wall

as instructed by engineer in charge.

86 Transporting from AMC store and laying -

spigot and socket New DI pipe line DI-K-9

pipe of various classes with CI/DI/MS

specials of following diameters. Rate

includes excavation up to minimum

mt. depth from top of pipe/as per

requirement in any soil, refilling after

laying pipe, covering and temptation of

carting surplus earth up to 30 mt. lead and

watering and compaction. Clearing the

site. All Joint shall be made tight & leak

a) 150 mm dia 5.00 Rmt. 77.68

b) 200 mm dia 5.00 Rmt. 93.75

c) 250 mm dia 5.00 Rmt. 113.39

d) 300 mm dia 5.00 Rmt. 136.61

e) 350 mm dia 5.00 Rmt. 185.71

f) 400 mm dia 5.00 Rmt. 207.14

h) 600 mm Dia 5.00 Rmt. 384.82

i) 900 mm Dia 5.00 Rmt. 675.00

87 Only removing & recover of existing -

CI/DI pipe lines & specials , removing any

type of joint, carting it to the Muni. Store

as & where directed as per instruction of

Engg. In charefge with excavation &

a) 100 mm Dia 5.00 Rmt. 64.29

b) 150 mm Dia 5.00 Rmt. 77.68

c) 200 mm Dia. 5.00 Rmt. 93.75

88 Removing & relaying of existing CI/DI -

pipe line & Specials, Cleaning of Pipe &

Specials from inside , inclding excavation

refilig etc. Comp. in the line & level with

any type of joint as per instruction of engg.

a) 100 mm Dia 5.00 Rmt. 64.29

b) 150 mm Dia 5.00 Rmt. 77.68

c) 200 mm Dia. 5.00 Rmt. 93.75

89 Labour charges for installing and jointing -

Sluice valve/Scour Valve including

loading, transporting from AMC's

store,lowering in location to the required

with excavation refilling alignment by

crane/tripod and chain block including cost

of total nos. of nuts, bolts, Necessary

gaskets and excluding fixing of tail pieces

with lead & jute etc complete as directed

by Engg. In charge.

90 Providing & supplying ISI mark DI D/F -

Sluice valves as per IS:14846 (Latest

edition) of following class and dia

including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores,

stacking etc. complete.

(A) PN 1.0 hand wheel operated -

91 Lowering, Laying, Jointing in position -

following C.I /DI- D/F Reflux valve,

Butterfly valves, Sluice Valve and air

valves including cost of all labour, jointing

material, including nut bolts and giving

satisfactory hydraulic testing, etc.

92 Labour charges for removing and recover -

of ex. C.I. Sluice valve with tail pieces and

carting it up to muni. Store or site as per

instruction of Engg. In charge item include

necessary Excavation , removing or

making joints, refilling etc. comp. as

directed by Engg. in charge.

93 Providing and supplying CI/DI Tamper -

proof /Bi Stream Air valves with SS

Float gun metal nozzle of approved make

& quality of following class and diameter

including all taxes, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to the

departmental stores, stacking etc.

complete. With Isolating Sluice Valve PN

94 Lowering, laying & jointing in position -

following air Valves including cost of all

labour, jointing material, including nut

bolts & giving satisfactory hydraulic

testing, etc. complete. With Isolating

Sluice Valve PN

95 Labour charges for collecting specials 500.00 Kg 21.43

from Municipals store loading,

transportation, unloading to the sie, laying

and fixing CI specials inclusive of all

jointing materials like lead, spun etc. and

labour, excavation re-filling and nece.

Dewatering as per instruction of engg.

96 Manufacture, Supply,Delivery & Fixing of -

Ductile Iron Socket Spigot Bends, tees,

reducers or any other specials as per BS-

EN-545/1995 Class-A series K12 suitable

for use with D.I Pipes manufactured as per

IS:8329/1994 delivery of specials is to be

made to GWSSB store or site of works any

where in Gujarat including fixing, all

taxes, loading, unloading, carting,

stacking,insurance, inspection charges,

octroi etc. complete.

a) For 100 to 300 mm dia 100.00 Kg 148.00

b) Above 300 mm dia 500.00 Kg 151.00

97 Construction of chambers in brick -

masonary, locally available in C.M. 1 :

foundation concrete 150 mm thick in C.C.

1:4:8 of trap metal size 25 mm to 40 mm

thick, inside cement plaster in C.M. 1:3

and cement pointing outside in C. M. 1 :3

& top cover of precast RCC slab 150 mm

thick upto 1 mt. depth from G.L. but excl.

cost of excavation and refilling. With cast

in situ RCC slab in two piece with fixing

FRC frame and cover etc.

complete(excluding cost of frame & cover

) with 23 mm thick brick masonary wall in

C.M.1:6 For Sluice Valve, Air Valve

0.9 x 0.9 x and 1.0 mt. deep chamber 2.00 No. 7,738.00

For Extra depth 0.50 Rmt. 4,479.00

1.3 m x 0.9 m x 1 m deep chamber 2.00 No. 9,389.00

For Extra depth 1.00 Rmt. 5,282.00

1.3 x 1.3 x and 1.0 mt. deep chamber 2.00 No. 11,351.00

For Extra depth 2.00 Rmt. 6,084.00

98 FRC Manhole Cover Providing F.R.C. 5.00 No 2,125.00

MH seat cover incl. carting to the work

site and fixing etc. comp. as Directed.

F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover: 728mm

ø & 100 mm thick circular cover,

35.00MT load design,100 x 2mm MS flat

all round,16mm ø plain round bar for

lifting the cover & should be fitted with

plastic cups. Frame:560mm ø clear

opening, -888 x 888 x 175mm. On the

upper periphery off rame 25x3 mm wide

MS flat should be well embed in concrete

to protect the edges off rame. FRC E.H.D.-

35 manhole cover & frame described as

99 FRC heavy duty cover size 730 mm. & 90 5.00 No 1,080.36

mm thick circular cover 20 M.T. design

load and frame size 560 mm clear opening

size 890 x 890 x 120 mm.

100 Carting and Fixing M.H., Chamber or 5.00 No 750.00

Catchpite Seat and Cover in line and level

to match exisisting road level in C.C. 1:2:4

and finishing smooth, watering and

protecting for 7 days etc. complete as

directed. M.H. seat cover will be supplied

byA.M.C.(from any store)

101 Extra rate over item of excavation of earth -

for excavation of asphalt pavement/RCC

of following thickness including

demolishing the asphalt carpet, metal,

soiling/cutting Reinforcement etc. comp.

with stacking the material as directed.

a) up to 0.20 meter thickness (By Manual) 100.00 Smt 71.43

b) up to 0.30 mt (by any type of Breaker 50.00 Smt 178.57

Machine or R.C.C Cutter machine

including cost of operator, fuel &

transportation etc complete.

c) 0.30 mt & above (by any type of Breaker 50.00 Smt 312.50

Machine or R.C.C Cutter machine

including cost of operater, fuel &

transportation etc complete.)

102 Reinstatement of asphalt road/pavement 200.00 Smt 231.47

using same material for soling and new

metalling grouting with tack coat etc

complete as directed.

103 Cutting of existing pipelines of following -

diameters including carting of nece.

specials from AMC store to site and from

site to AMC store (recovered materials)

nace. labours for excavation, jodan &

backfilling fitter, supervisor, etc. complete.

Rate also includes electric cutter,

dewatering pump fuel and transportation

of machineries, chain pulley block if

requires working at an instructed specific

time of day or night etc. complete.

a) 100 (CI/DI) mm dia. 2.00 No 1,446.43

b) 150 (CI/DI) mm dia. 2.00 No 1,464.29

c) 200 (CI/DI) mm dia. 2.00 No 2,455.36

d) 250 (CI/DI) mm dia. 2.00 No 3,169.64

e) 300 (CI/DI) mm dia. 2.00 No 5,142.86

f) 350 (CI/DI) mm dia. 2.00 No 5,544.64

g) 400 (CI/DI) mm dia. 1.00 No 6,598.21

h) 450 (CI/DI) mm dia. 1.00 No 10,187.50

i) 500 (CI/DI) mm dia. 1.00 No 11,580.36

j) 600 (CI/DI) mm dia. 1.00 No 14,285.71

k) 700 (CI/DI) mm dia. 1.00 No 19,214.29

104 Manufacture, Supply & Delivery, Laying -

of Electric Resistance Welded (Up to

400mm)/ Submerged Arc Welded(Above

400mm) M.S.Pipe having beveled ends

plate or coil conforming to IS-3589-2001

or its latest revision/ ammendment for

following thickness outside diameter at

GWSSB store or site anywhere in Gujarat

State including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading

conveyance to Departmental stores,

stacking etc. all complete.

a) upto 914mm OD & 10mm Thickness of 1,200.00 Kg 70.67

b) Above 914mm OD & Above 10mm 3,585.00 Kg 71.17

Thickness of Plate/Pipe

105 Manufacture, Supply & Delivery of 80.00 Rmt 23,028.00

Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above

400mm) M.S.Pipe having beveled ends

plate or coil conforming to IS-3589-2001

or its latest revision/ ammendment for

following thickness outside diameter at

GWSSB store or site anywhere in Gujarat

State including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading

conveyance to Departmental stores,

stacking etc. all complete.

I/S epoxy Painting (100 Micron) & O/S

Gunniting (25 mm Thick)

1219 MM Dia OD & Thikness 10 mm

106 Lowering, Laying & Welding in position 80.00 Rmt 1,088.00

to correct line & Level M.S. Pipe with

outer gunniting & inside lining/Epoxy

painting on padestal or chairs upon

prepared formation or prepared bedding in

trenches the rates include conveyance from

store to site of work

loading,unloading,joint

plastrering,hydrotesting etc compelte

above 7 mm thick

107 Providing 406 Micron epoxy coating to 325.00 Smt 332.00

inside pipe line Providing epoxy coating

to inside pipe line with two parts of

Solvent free high build liquid epoxy lining

as per AWWA C210-07 Suitable for

potable water application & shall be

approved by CFTRI- lndia/BS 6920-

UK/international standard /NSF/ANSI/-61

2004 to be fit for contact with potable

water for human consumption with

micron thickness. inclusive of necessary

materials , labour ,Equipment

,Contractor's overhead charges and

profit and including all taxes

108 Providing and applying 3 LPE coating 85.00 Smt 808.00

outsie 3 layers polyethelene (LPE) coating

with required thickness as per DIN_30670

or its latest revision or amendment and

detail specification with necessary material

& Labour and Equipments etc.

109 Gas cutting ( Either square cut or V cut) -

pipes, plates etc. complete for following

thickness plate

a) Above 10 mm thickness plate 200.00 Rmt. 72.00

b) 5 to 10 mm thickness 200.00 Rmt. 56.00

110 Welding in all positions with required -

number of runs, for M.S. pipes internally

and / or externally including gauzing

wherever necessary, fixing appurtenances

and other accessories in connection with

pipe laying work as per specification. Butt

joints with convex fillet welds Lag

a) Above 7 mm thickness plate 200.00 Rmt. 729.00

b) 4 to 7 mm thickness 200.00 Rmt. 681.00

111 Providing and fixing M.S.Flanges to M.S. -

Pipe as per IS specification and as directed

by Engineer in charge.

a) Ring flange - M.S.Special Flanged -

Upto 300mm dia. 500.00 kg 98.00

300 mm dia and above 250.00 kg 98.00

b) Blank flange - M.S.Special Flanged -

Upto 300mm dia. 500.00 kg 98.00

300 mm dia and above 250.00 kg 98.00

112 Dewatering by pumping set of required 100.00 HP/hr 18.32

capacity including temporary platform

carting pumping at site and fixing the same

in position including all accessories, and

fuel and labour etc. complete.

113 Supply , installation , testing & 1.00 No 1,412.00

commissioning of Bourdan pressure gauge

having 150 mm dia with necessary syphon

& S.S. cock and shall be provided at each

pump outlet & pump header as per

specification and data sheet. Range 0-

114 Providing and fixing to wall, ceiling and -

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good

the wall ceiling and floor.(At any floor

a) 15 mm dia GI Pipe 5.00 Rmt. 244.13

b) 20 mm dia GI Pipe 5.00 Rmt. 297.25

c) 25 mm dia GI Pipe 5.00 Rmt. 393.93

d) 40 mm dia GI Pipe 5.00 Rmt. 596.73

e) 50 mm dia GI Pipe 5.00 Rmt. 779.60

115 Providing and laying in trenches -

galvanised mild steel tubes (Medium

grade)of the following nominal bore, tube

fittings (Earthwork in trenches to be

measured and separately)

a) 15 mm dia GI Pipe 5.00 Rmt. 150.91

b) 20 mm dia GI Pipe 5.00 Rmt. 190.97

c) 25 mm dia GI Pipe 5.00 Rmt. 279.39

d) 40 mm dia GI Pipe 5.00 Rmt. 421.12

116 Providing And Jointing Stoneware Pipes -

Incl. Excavation Up to 2 Mt. Refilling,

Transporting Pipes To Work Site,

Unloading, Lowering In Trench, jointing

material Such As Cement, sand, Hemp

Bitumen As Directed, Incl. Watering The

Trenches Spreading And Carting away Of

Surplus material as directed by engineer

a) 100 mm dia 2.00 Rmt. 119.64

b) 150 mm dia 2.00 Rmt. 163.39

c) 230 mm dia 2.00 Rmt. 344.64

117 Repairing of damaged MH including -

removing damaged brick & repairing by

masonry in C.M. 1:5 & plaster in C.M.1:3

& fixing C.I. Steps & excluding seat &

Cover in C.C.1:2:4 rate also includes

removing debris from MH & carting the

same as directed.

a) Up to 0.15 M ( @ two coarse) 5.00 No 732.14

b) Up to 0.35 M ( @ two coarse) 5.00 No 1,160.71

c) Up to 0.65 M ( @ two coarse) 5.00 No 1,794.64

118 Providing, laying, spreading and -

compacting graded stone aggregate to wet

mix macadam specification including

premixing the Material with water at OMC

in mechanical mix plant carriage of mixed

Material by tipper to site, laying in

uniform layers in subbase / base course on

well prepared surface and compacting with

vibratory roller to achieve the desired

density as per MoRTH clause

a) Production & Supply of WMM 50.00 Cmt 1,495.54

b) Laying of WMM 50.00 Cmt 31.25

119 Labour charges for doing washout of water 5.00 No 669.64

pipe line at end including necessary

excavation refilling the pit. Allowing the

water to flow for 15 minutes twice or

thrice as per site condition during supply

hour, dewatering the pit and plugging with

existing wooden butch. etc. comp. as per

Engineer In Charge

120 Barricading the entire break down or 100.00 Rmt 80.36

excavated area on rental basis using

wooden ballies / M.S.angles at max.

meter centre to centre, C.G.I. Sheet,

reflective paint / Board out side to avoid

accident & for smooth traffic diversion &

movement including cautionary board etc.

Item also includes for making temporary

sufficient nos of lighting arrangement

through out the work with necessary

required arrangement. ..The same shall be

removed after completion of work. (Only

for break down work from start to

121 Labour Charges for repairing the joint -

leakage in the existing C.I./DI Pipe line

with specials incl. required materials such

as jute and lead etc , nece. excavation in

any type of soil, refilling, nacessary trust

block etc.comp. as per instruction of

engg.in charge.(Joint reparied under this

item should not be paid in next four

months under normal condition)

a) 80 Mm dia. to 100 MM dia 10.00 joint 379.46

b) 150 Mm dia. to 250 MM dia. 10.00 joint 446.43

122 Labour work for fixing above interlocking 50.00 Smt 69.64

blocks on up to 50mm the sand

bedding,levelling,watering anf fixing. Rate

incl. average 30cm depth for excavation

and or filling,carting away

debries/excavated material up to 5 km and

cleaning the site etc.comp. as directed.

123 Supplying wooden taper plug from jungly -

wood (like limda, ambo ) etc. comp.

a) (A) 15 mm dia to 20mm dia 5.00 No 13.39

b) (B) 25 mm dia to 37mm dia 3.15 No 17.86

c) (C) 50 mm dia 2.00 No 89.29

d) (A) 80 mm dia to 100 mm dia line 1.00 No 312.50

124 Making connection of Any dia 1.00 No 90,000.00

DI/MS/HDPE Pipe with Existing Pipeline

including cutting the pipe to required

annular shape of Required dia. By Electro

Welding and jointing Any dia DI/MS pipe,

including dewatering, excavation, refilling

etc. with all required materials such as

welding rods and other necessary required

materials including giving a satisfactory

leakage proof test.

Removing any kind of pavement incl 500.00 Smt 12.50

125 stacking of serviceble material disposal of

unserviceble material with 50 meter lead

126 Providing and fixing in position 60 cm 10.00 Rmt 5,619.00

wide MS ladder with angle of 75 x 75 x

mm as support and 50 x 50 x 5 mm angle

as step at 200 mm c/c including (both side)

GI side railing with ISA 75 support

including fixing in cement concrete for

any height including making holes in RCC

walls if any and making good the RCC

wall / masonry wall after fixing work of

staircase etc. complete as directed

including two coats of approved quality oil

paint directed including two coats of

approved quality oil paint over one coat of

approved quality primer.

127 Providing and laying white glazed tiles 6 25.00 Smt 908.17

mm thick in flooring, treads of steps

skirting ,dado and landing laid on a bed of

12 mm thick cement mortar 1:3 (1 cement

: 3 coarse sand) finishing with flush

pointing in white cement (Upto 10 ton)

128 Providing and fixing wsh down 1.00 No 1,875.68

watercloset (Europeantype,W.C.Pan) with

integral Por S trap including jointing the

trap with soil pipei n Cement Mortar1:1(1-

Cement:1-fine sand) (Seal and cover to

beme asured and paid for separately)

(A)vitreous China Pattern :(i) in white

colour 32 dia. C. P. brass half turn flush

cock complete including earthwork, bed

concrete of 1:4:8.

129 Providing and fixing flat back white colour 1.00 No. 2,084.70

vitreous china wash basin 550 mm x

mm size with CI brackets painted white.

Wash basin shall have 15 mm dia GI

supply pipe, overflow chase, 15 mm dia

pillar cock and stop cock with PVC bottle

trap and PVC pipe piece upto wall plus

mm dia PVC waste pipe upto floor level

connected to 32 mm dia CI pipe below

floor and connected to nearby floor trap

complete with unions and plumber's white

soldered joints with necessary cleaning

eye, complete. All chases cut in wall for

fixing pipes shall be made good in CM

130 Providing and fixing Flat Back Urinal ( 1.00 No. 1,535.63

Hindware- 44cmx31.5cmx26.5cm) or

equivalent approved and of approved

shade including fixing the same in

concealed CI brackets, CP spreader, CP

dome shaped waste coupling, CP bottle

trap with flanges, CP angle cock flush

pipe making inlet and out let connections

all complete as per the instruction of

Engineer - In - Charge

131 Providing, laying and jointing in true line -

and level U.P.V.C. Pipe (SCH-40) for

including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre

C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

a) 15mm dia. 29.50 Rmt. 71.93

b) 25mm dia. 25.00 Rmt. 90.93

c) 40mm Dia 15.00 Rmt 146.65

d) 50mm dia 15.00 Rmt 193.73

132 Providing & fixing gun metal check or non -

return full way wheel valve

133 Providing and fixing C.P brass screws 2.00 No 203.79

down Bip tap 15 mm dia polished bright

of approved make and design ,with all

necessary fittings.

134 Providing and fixing screw down bib taps 3.00 No 157.29

of following size.(C)Gun metal screw

down bib tap. i) 15mm dia.

135 Providing and fixing 150 mm x 100 mm 2.00 No 976.00

intercepting sewer trap embedded in

concrete complete including excavation

and backfilling.

136 Constructing Manhole with R.C.C. top 1.00 No 11,314.02

slab in 1:2:4 mix (1-cement: 2-coarses and

:4- graded stone aggregate 20 mm nominal

size) foundation concrete 1:3:6 mix (1-

cement : 3-coarse sand : 6-Brick bats

40+50 mm size) inside plastering 15 mm

thick with Cement Mortar 1:5 (1-Cement :

5-coarse sand)finished with a floating coat

of neat cement and making channels in

cement concrete 1:2:4 mix (1-Cement: 2-

Coarses and : 4-stone aggregate 20 mm

nominal size) finished smooth complete

including curing and festing (i) Inside size

900mm x 1200 mm and 2.0 M. deep

including C.I. cover with frame size

560mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of

cover 64Kg. and Wt. of frame 64Kg.) (A)

With 230 mm thick walls of brick msonry

using brick having crushing strength not

less than 35Kg./Sq.cm. in Cement Mortar

1:5 (1-Cement : 5-Coarse sand) (1) A type

depth 0.90 Metre for 150 mm diameter

137 Providing and supplying in standered 15.00 Rmt 322.00

length ISI mark rigid unplasticised PVC

pipes suitable for potable water with

ringfit joint including cost of rings, as per

IS specification no. 4985/1988 including

all local and central taxes, transportation,

freight charges,octroi,inspection charges,

loading, unloading conveyance to the

departmental stores and including cost of

jointing material etc. complete Test

pressure of 4 Kg./csmt of 160 mm dia for

138 Providing and fixing cast iron (Spun) 2.00 No 600.08

Nahni trap of the following nominal

diameter of self cleaning design with C.I.

screaed down or hinged grating including

cost of cutting and making good the walls

and floor 100mm inlet and 50mm outlet.

139 Providing and fixing S.W. gully trap with 2.00 No 1,234.57

C.I. grating brick masonry chamber and

water tight C. I. cover with frame of

mm x 300 mm size (inside) with standard

weight. (i) Square mouth traps.(B) 150mm

x 100mm size P or R type

140 Providing and fixing 100 mm size P or S 1.00 No 311.85

trap for water closet squatting pan

including jointing the trap with the pan and

soil pipe in cement Mortar1:1 (1-Cement :

1-Fine sand) (A) Vitreous China.

141 Providing and laying (to level or slopes) 75.00 Rmt. 288.23

and jointing with stiff mixture of Cement

Mortar in proportion 1:1 Selt glazed stone

ware pipes including testing of pipes and

joints complete.(B)150mm dia. (upto

142 Constructing brick masonry chamber for 2.00 No 3,624.51

under ground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg.Cm 2in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm internal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23Kg.) and Wt. of frame

15Kg.) (R.C.C. top slab e with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete. (ii) Inside

dimensions 500mmx700mm and 450mm

deep for pipe line with one or two inlets.

143 Providing and fixing over roof black 1,000.00 liter 3.91

colour PVC overhead water tank of

approved manufacture with all necessary

fittings and connection etc,complete on

144 Making holes on existing C.I./ D.I./MS -

water pipe line including necessary GI

fittings item also includes necessary

excavation, dewatering and refilling as per

instruction engg. In charge etc. comp.

a) (a) 15 mm dia 2.00 Nos 312.50

b) (b) 20 mm dia 2.00 Nos 401.79

145 Providing and fixing to wall ,ceiling and -

floor galvanised G.I pipe (medium duty )

of the following nominal diameter with

pipe fitting and clamps including making

good the wall,ceiling and floor pipes to be

tested for a pressure as specified.

a) (a) 15 mm dia 30.00 Rmt 100.00

b) (b) 20 mm dia 15.00 Rmt 127.00

c) (c) 25 mm dia 15.00 Rmt 182.00

d) (d) 40 mm Dia 50.00 Rmt 273.00

Empty boring through all sorts of strata for 50.00 Rmt 1,005.24

providing 450 mm Diameter R.C.C. bored

piles to required depth required depth

including providing necessary casing pipe

with all plants and equipments as required

Providing & laying controlled cement 10.00 Cmt 4,734.35

concrete M 300 for R.C.C. bored piles of

0.450m dia. including ramming, vibrating,

curing and finishing complete.

Fixing of Rebar on concrete structure for -

148 connection with new structure using

Hilti/Fischer or equivalent technology

including all labour, tools & tackels

temporary arrangement, safety measures

10 mm dia. Bar 100.00 Nos 351.00

12 mm dia. Bar 100.00 Nos 420.00

16 mm dia. Bar 150.00 Nos 490.00

20 mm dia. Bar 165.00 Nos 560.00

Name SITC of New Pumping Machinery with related Mechanical, Electrical and

of Instrumentation works with Five Years Operation and Comprehensive Repairing &

Work Maintenance Work For Augmentation of Underground Tank No.-5 at Dudheswar Water

MECHANICAL WORK

Item Qty Unit Amount

VT PUMP-MOTOR SET:

Supply, Installation, Testing and

Commissioning (SITC) of self lubricated type

Vertical Turbine Pump of following duty

parameters & guaranteed efficiency of

following MOC, having 1500 RPM max.

speed, suitable to couple with motor with

column and bowl assembly, discharge head,

base channel / Rolled Steel Joist etc.

MOC: Impeller & sealing rings- CF8M, Bowl

& suction bell of CI FG 260 as per IS

with 2 % Ni, Shaft with coupling - SS

Column Pipe of M.S. ERW of min. 450 mm

dia. & min. 8 mm thk. and each piece of

/ 2.5 m long pipes and total length as per

actual site req. and to achive min.

submergence requirement, Gland packed, MS

Base plate, Thordon bearings, and Suction

Strainer of SS-304 (opening shall be min.

times the area of opening of bell mouth /

suction or as per pump mfg. rec.), Sole plate,

Flex. pin-bush coupling, foundation bolts,

complete hardware's, Hot dip galvanised

(HDG) bolts, nuts & washers, gaskets etc.

complete as per IS and Specs and also

including in scope any other parts /

accessories / fittings required to complete the

work in all respects & satisfactory operation

of VT pump set.

Capacity: 1500 m³/hr,

Head: 40 Meter.

Induction Motor rating Mini. 250 kW or

higher as per manufacturer

INDUCTION MOTOR FOR VT PUMP

Supply Installation Testing and

Commissioning (SITC) of approved make,

energy efficient, Efficiency Class-IE3,

Vertical flange mounting, solid shaft, squirrel

case, Induction Motor rating mini. 250 kW or

higher as per IS 12615: 2018 and as per pump

mfg. recommendation, 3Phase, 415V, 50Hz.,

AC supply, 1500 RPM max.synchronous

speed and having TEFC enclosure with Class

F insulation (temp. rise limited to Class B)

with RTD sensors for winding & bearing

temperature protection.

2.1.1 VALVES 1 Nos. 7,791.00

Supply, installation, testing and

commissioning of Manually gear operated

CI /DI Double Flanged, Non Rising Spindle

type, Sluice Valve conforming to IS

PN 1.0 with SS 304 seat rings and SS spindle

with all hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data

Size : 150 mm NB (Manually Operated - On

2.2.1 Supply, installation, testing and 7 Nos. 236,468.00

commissioning of Electrically gear operated

CI / DI Double Flanged, Non Rising Spindle

type, Sluice Valve with actuator , integral

starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all

hot dipped galvanised hardware's, bolts, nuts

& washers, gaskets, etc. as per data sheet.

Size : 500 mm NB (Electric Gear Operated -

Delivery of Pump)

2.3.1 Supply, installation, testing and 7 Nos. 143,423.00

commissioning of double flanged CI / DI

Dual Plate Check Valve conforming to API

594 Class 300 / PN-1.6 with CS dual door,

hinge pin & stop pin of SS 410 , springs of

AISI 304 and seat rings of SS 304 ( renewable

), along with all required accessories, gaskets

and hardwares,etc. and as per

specification.Size : 500 mm NB (On Delivery

2.3.2 Size : 1200 mm NB (On Header Pipe) 1 Nos. 256,800.00

2.4.1 Supply, installation, testing and 1 Nos. 553,140.00

commissioning of Electrically & gear

operated CI / DI DF Butterfly Valve,

conforming to IS 13095 / BS EN 593, PN

with SS 304 renewable seat rings , indicator,

gear box with bolts, nuts & washers, gaskets,

etc. as per specifications.Size: 1200 mm NB

(Elec. Operated on Header Pipe)

2.5.1 SITC of CI / DI Tempor proof Flanged Air 1 Nos. 25,759.00

Valve with Isolation Sluice Valve as per IS

respectively with SS304 float, gun metal

nozzle, complete hardware's, bolts, nuts &

washers, gaskets etc. including all taxes,

Insurance, Transportation, freight charges,

Inspection charges, loading, unloading,

conveyance to departmental stores, stacking,

security etc. as per IS and Specification.

Size: 150 mm NB - Pn 1.0 (On Heder line)

3.1.1 Supply, installation, testing and 7 Nos. 22,200.00

commissioning of double flanged Expansion

Bellows confirming to EJMA/IS standard

with PN 1.0 rating & all necessary St.St.

Size : 500 mm x 300 mm ( L )(Delivery of

3.1.2 Size : 1200 mm x 350 mm ( L ) (On header 1 Nos. 111,512.00

4.1.1 MS FITTINGS & SPECIALS: 60 RMT 22,307.87

Supply, Fabrication, Gas cutting of pipe,

welding, Installation, testing and

commissioning of MS flanged / plain ended

specials and fittings like MS reducer,

expander, Metering bends, Tees, etc.

conforming to IS 3589, flanges confirming to

IS 6392-PN- 1.0, fabricated from MS. plate

with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply

The scope also includes civil work, casting

PCC thrust block, chipping, grouting,

supporting,etc. require for laying &

connecting the MS pipes & fittings as require

outside the pump house

Size: 1200 mm NB mm x 10 mm Thk (

4.1.2 Size: 500 mm NB X 10 mm ThK 35 RMT 9,106.28

4.2.1 Providing epoxy coating to inside pipe line 227 Sq.m 332.00

with two parts of Solvent free high build

liquid epoxy lining as per AWWA C210-07

Suitable for potable water application & shall

be approved by CFTRI- India/BS 6920-

UK/international standard /NSF/ANSI/-61

2004 to be fit for contact with potable water

for human consumption with 406 micron

thickness. inclusive of necessary materials

labour ,Equipment ,Contractor's overhead

charges and profit and including all taxes.

Size : 1200 mm NB X 10 mm Thk ( For

4.2.2 Size : 500 mm NB X 10 mm Thk ( Delivery 55 Sq.m 332.00

4.3.1 Supply, welding , Installation, testing & 8 Nos. 1,883.56

commissioning of MS flat machined faced

flanges confirming to IS 6392 & drilled as

per IS-1538 with drilling off centre bolt holes

and flange thickness as per PN 1.0 including

cutting & welding.

Size : 150 mm NB Drilled ( For Header Drain

Pipe and Air Valve Pipe)

4.3.2 Size : 500 mm NB Drilled ( Delivery Pipe Of 28 Nos. 10,290.00

4.3.3 Size: 1200 mm NB Drilled (For Header Pipe) 40 Nos. 40,746.44

4.3.4 Size: 1200 mm NB (Blind) 1 Nos. 42,933.90

5.1.1 G.I. PIPES & FITTINGS: 20 RMT 1,404.00

Supply, installation, connection with

equipments as required, testing and

commissioning of GI pipe conforming to IS-

1239 , Medium Duty with coupling, tee,

bend, union, elbow, flanges , etc as all

required fittings for connection complete with

gaskets, hardware, and required accessories as

per IS & SpecificationsSize: 150mm NB (on

Header for Air Valve Piping and header drain

6.1.1 Flanged Joints of Pipes, Fittings and 10 Nos. 611.00

Supply, Installation, Making of IS

Flanged joint of Pipe flanges, Fittings and

Specials Joints with all jointing materials,

rubber packing, GI nut bolts, labour etc.for

complete connection.

Size: 150 mm dia (on Header for Air Valve

Piping and header drain Pipe).

6.1.2 Size: 500 mm dia (Each Pump Del. Flange) 42 Nos. 312.00

6.1.3 Size: 1200 mm dia (For Header Flanges) 24 Nos. 1,295.00

7.1.1 Providing, Supply of Structure Steel at site of 1500 Kg. 64.83

work with freight, loading, unloading carting,

etc. including all taxes and duties complete

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates (below 10mm thickness) for cable

trench etc. required for support structure of

Elecrtrical equipments etc. for support on

floor / wall / beam / brackets etc. as per tender

7.1.2 Labour Charges for lowering, laying, Fixing 1500 Kg. 11.36

with fabrication various size section of MS

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates, for cable trench etc Complete with two

coats of red oxide and two coats of approved

colour shade of epoxy paint as per relevant IS

and as per specification.

8.1.1 E.O.T. CRANE WITH HOIST 1 Nos. 626,250.00

Providing & erecting Single girder type fully

electrically operated E.O.T. crane with

electrically operated hoist, class II duty,

geared travelling trolley with seven meter lift

complete with long travel rail track (40 mm

sq. bar), moving or cross girder, all three

motions electrically operated by suitable

rating motor IP 54, control panel & down

pendant control block, brake, safety device,

cables form motor to starter panel & other

required accessories & tested as per IS

Specifications.

EOT Crane with single/Box type girder

having motorised motion in all three

directions, manufactured as per IS - 807, IS

3938 & IS - 3177 , class-II, complete with

electrically operated hoist, geared trolley,

cross girder, rail track, brake, wire rope drum,

motors, safety device, pendant push button,

starter panel, cables from motor to starter

panel and all other required accessories like

limit switches, panel, power supply system

(Fastoon cable type), fasteners, epoxy

painting, etc. and tested to 25 % over load

complete as per specifications.

Note: Minimum as specified capacity or

higher as per requirement such that EOT

crane capacity is min.1.25 times of the pump,

motor OR single heaviest component to be

lifted within pump house.

Capacity : 5 Ton. (for Pump Room)

Lift : 10.00 m (max)

Span: 9 m-12 m (or as per actual site

Bay length: 30.0 m (max.)

9.1.1 CHLORINATION SYSTEM 2 Plant 210,642.00

SITC of wall mounted, FRP cabinet type,

Vacuum operated Chlorination plants with

required piping, fitting, valves, safety and

testing kit, etc. Complete arrangement shall

be as per attached standard drawing for one

complete system combaining the Two plants

complete in all respect as per IS and as per

specsification.

Capacity: 05 kg/hr. for each plant making one

complete plant as per attached standard

drawing and shall include the followings:

(1) 1 No. Submersible Pump motor set with

continuous Cable from pump to starter panel

without any Joint with proper conduit piping

and clamping. (2) 1 No. Diffusers, (3) 1 No.

Ejector, (4) 1 No Chlorinator , (5) 1 No.

Vacuum Regulators, (6) 1 No. Strainer , (7)

Nos. Isolation Ball Valves , (8) 1 Non Return

Valve, (9) 1 Nos. Yoke clamp (for cylinder),

(10) 1 No. Pressure Gauge with require piping

and isolation valve, (11) 1 No. Chlorine

Gauge at Cl2 manifold (12) 1 Lot of piping,

fittings, valves & instruments, (13) Vaccum

Gauge , 14) MS support of 50 mm x 50 mm x

4 mm thk, (15) 3C copper armour power

cable from PMCC panel to Chlorine room of

required size with proper piping & Clamping

as equired (16) 1- lot inter connecting piping

of identical pipe size of Cl2 booster pumps

delivery line with isolation valve. (17) 1 No.

common Starter panel with TPNB MCB with

necessary cabling & electrical connections

etc. and other necessary items as per IS &

Tender Specification and Data sheet for Cl2

booster pumps,(18) 1 no common 3/4" Cl2

gas manifold of Carbon steel suitable for two

9.1.2 AUTO SHUT OFF CHLORINE 1 Set 1,195,000.00

CYLINDER VALVE SYSTEMSITC of

Automatic Chlorine cylinder shut off valve

for single chlorine cylinder (100 kg) for

chlorination system comprising of :01) 2 No.

Pneumatic Auto shut off chlorine cylinder

route valve with actuator system with Air line

filter, Solenoid Valve, Air motor, Yoke

clamp, etc. of required capacity , size,

rating02) 1 Lot, Control panel cum PLC with

interconnecting cables/wiring for Auto Shutt

Off chlorine Valve of Cylinder,03) 1 No, Air

Compressor04) 1 Lot, uPVC-SCH 40, Air

piping for Auto Shut off valve as

required,05)1 No Chlorine leak detector of 0-

10 ppm capacity ,06) 1 Lot, Interconnecting

instrument & Power cable,07) 1 No.

Industrial Hooter,

9.1.3 AUTOMATIC LEAK CHLORINE 1 Set 540,000.00

DISSOLVING SYSTEM

SITC of automatic leak chlorine dissolving

system in caustic neutralisation tank for (100

kg) cylinder for chlorination system

comprising of :

01) 2 Nos. FRP Hood for 100 kg Cl2 Cylinder

02) 1 no CF Air Blower

03) 1 Lot Flex. PVC ducting Pipe,

04) 1 No. uPVC SCH 40- Diffuser,

05) 1 No. Relay based Control Panel

06) 1 Lot Cable and Cable Tray for Blower

07) 1 No. PP + FRP Tank for Caustic storage

08) 1 Lot PP Isolation Ball Valve for Tank

09) 1 Lot Hadware, jointing & misc. items as

required to complete the work in all respects

& Civil Foundation.

9.1.4 Supply of safety kit & testing as specified in 1 Set 83,241.00

the specifications.

(1) 1 Set Chloroscope

(2) 1 set. Air breathing apparatus for 45 min

as per IS with O2 bottle,

(3) 1 set. Emergency tool kit

(4) 1 No. Amonia Torch

9.1.5 TRAY FOR CHLORINE SOLUTION 100 RMT 158.00

Providing & Fixing approved make

Perforated C type tray made from CR sheet

along with required accessories to sustain the

weight of uPVC pipe with bends, tees and

clamps for fixing of uPVC pipe and all the

fittings as required as per site condition. The

Perorated type tray shall be single or double

needed as per required and as per IS

2062/1079 and shall be coated with hot deep

galvanised as per IS 2629/4759 with coupler

plate/Fish plate and GI hardware like nut-bolt

and washers, etc. erected providing support

as per specification and as per instruction of

engineer in charge.

Size: 100 x 50 x 1.6 mm thk

10.1.1 DISMANTLING, CARTING AND 1 JOB 75,000.00

STACKING (Mechanical Items)

Dismantling of all Existing SCF Pump-Motor

set, existing Valves, Drain Pumps, Pipes and

Specials (Tees, Band etc), EOT Crane etc. of

Existing SCF Pump House covering with

Plastic and packing in wooden box with all

required accessories and transportation &

stacking at AMC store / site or as per

instruction given by the engineer In-Charge.

10.1.2 DISMANTLING, CARTING AND 1 JOB 85,000.00

STACKING (Electrical Items)Dismantling

of all existing LT Panel, APFC Panel, All

Cubicle panels, Cables, Cable Trays, lighting

fixtures, existing lighting wiring including

loading, shifting & unloading at AMC store /

site or as per instruction given by the engineer

TOTAL ESTIMATE OF MECHANICAL WORK (Without GST)

SITC of New Pumping Machinery with related Mechanical, Electrical and

Name Instrumentation works with Five Years Operation and Comprehensive Repairing &

of Maintenance Work For Augmentation of Underground Tank No.-5 at Dudheswar Water

work Work of AMC.

ELECTRICAL WORK

Sr Unit Rate Total Amount

Sr Unit Rate Total Amount

1.1.1 H.V. CABLES 100 Mtr 1,261.00

Supply, laying, testing & commissioning

of 11 kV, 3C x 240 sq.mm.XLPE (UE)

armoured H.V Cable stranded Aluminium

conductor, galvanised steel flat strip/ round

wire armoured, extruded PVC type ST2

sheathed, heavy duty cable conforming to

IS:7098 (Part-2) & IEC:60502(Part-2).

1.2.1 Supply, Installation, Testing and 4 Nos. 6,985.00

Commissioning of the Heat shrinkable

type Indoor H.T.cable end terminations

suitable for 11 kV, 3C x 240 sq.mm.

XLPE (UE) armoured cable including

necessary earth connectivity connection,

material & consummables making the

termination/ joint complete ensuring the

joint resistance is within the permissble

limit as per IS.

1.2.2 Supply, Installation, Testing and 2 Nos. 11,487.00

Commissioning of the Heat shrinkable

type outdoor H.T.cable end terminations

suitable for 11 kV, 3C x 240 sq.mm.

XLPE (UE) armoured cable including

necessary earth connectivity connection,

material & consummables making the

termination/ joint complete ensuring the

joint resistance is within the permissble

limit as per IS.

Modification of Existing 2500 KVA

Transformer LT side Cable Terminal

Box for required Current rating of Busbar,

Required Insulator, Required space for

Cable Termination.

Design & Supply of 433 V L.V. Cable Box

chamber comprising of followings:

→Complete L.V. cable box with fixing of

suitable disconnecting type flexible copper

strip with solid copper flat bus bar

1.2.1 alongwith fittings of epoxy insulator, 2 JOB ₹ 180,000.00

hardware, GASKETS, earthing

arrangement, Including Cable Box Support

- suitable for 8 runs of 4 Core cable X

→ M.S. Gland plate in undrilled condition

→ Cable box duly painted with EPOXY

Painted gray as per 632 of IS– 5 (as per

your existing transformer paint shade)

NOTE: Work to be execute on OEM

authorised only.

1.2.2 LOW VOLTAGE (LT) PANEL BOARD 1 Nos. 7,478,925.00

SITC of PMCC Panel (50kA) complete in

all respects as per SLD / Specification / IS

and including following as minimum:

(1) Two nos. FP 2500A Microprocessor

EDO ACB for I/C with Digital Voltmeter

with Voltmeter Selector Switch, Digital

Power Factor Meter, Digital Ammeter with

Ammeter selector switch, MFM with RS-

485, R, Y, B, on, off, trip Indicating lamps

& TNC Switch, ON, E-STOP, Reset

Pushbutton, etc.

(2) One no. FP 2500 A EDO ACB for

Bus-Coupler. (Same as per Incomer)

(3) 2500 A TPN Main busbars. (Main &

Auxilary bus-bars size with current density

(4) Six Nos. (3W + 2S + 1 Spare) Soft

starter for min. 250 kW Motor or higher

as per pump Manufacturer reco. with

suitable derating and with 630A TPN

Motor Duty MCCB, 550A AC3 duty line

& Inbuilt / External bypass contactor,

Ten channel temperature scanner with

potential free contacts, fast acting fuse,

MFM with RS-485, door display key pad

& digital MPR+SPP with CBCT, on, off,

trip Indicating lamps & ON, E-STOP,

Local/Remote, Auto/ Manual selector

switch & LCS for Pump- MOV Actuator

with Indication & push button etc.

(5) Two Nos. (2W) VFD starter for min.

250 kW Motor or higher as per pump

Manufacturer reco. with suitable derating

and with 630A TPN Motor Duty MCCB,

550A AC3 duty line contactor, VFD with

inbuilt RS 485 for 250 kW Motor or

higher as per pump manufacturer reco.

with VFD rating minimum (Amp of

motor/pump@ 50°C) with suitable

derating with detachable type door

mounted display key pad, Semi conductor

fuse, Input Choke shall be provided, rating

as recommended by VFD manufacturer &

Output choke as recommended by VFD

OEM for harmonic mitigation,VFD with

3C3 Confromal coating, Ten channel

temperature scanner with potential free

contacts, fast acting fuse, MFM with RS-

485, SPP, On, Off, Trip, Indicating lamps,

Start, Stop, Speed Up & down Push

buttons, Local/Remote, Auto/ Manual

selector switch. & LCS for Pump- MOV

Actuator with Indication & push button etc.

(6) Two nos. 630 A FP Microprocessor

MCCB feeder for APFC Panel.

(7) 3nos. 250A TPN microprocessor

MCCB feeder for Borewell Feeder &

(8) Tr. losses comp. fixed capacitor bank

with Four no. 20 kVAR, Three no.

kVAR & Three nos. 5 kVAR capacitors

bank , 2 nos. 2 kVAR capacitors bank &

One no. 1 kVAR capacitors bankeach with

capacitor duty contactor, timer & 'D' curve

MCB, etc. for each transformer.

(9) Two nos. 63ATPN MCCB feeders (for

PDB - Auxiliary accessories load)

(10) Two no. 32A TPN MCCB spare

(11) One no. Outdoor lighting LDB feeder

with 32ATPN 'C' curve MCB with 32A

contactor & Time switch.

(12) 6 nos. 32A 'C' curve MCB feeders (for

Indoor LDB, 2nos. Chlorination System,

3nos. spare feeders)

(13) 7 nos. 16A DP MCB feeders (for

single phase supply for 2nos. X'mer

marshaling box, HT Panel & 3 Nos.Spare.)

(14) 6nos. 2500A/1A, Cl.-0.5 metering CT

(15) 3nos. 2500A/1A, Cl.-1.0. Summation

(16) 2nos.2500A/1A, Cl.-1.0. CT For

(17) 2nos. Multiplication relay for dry run

protection of pumps

1.2.3 SITC of 430 kVAR APFC Panel with 7% 2 Set 1,016,451.00

AL detuned reactor, complete in all

respects as per SLD / Specification / IS and

including following as minimum:(1) 630 A

FP Microprocessor MCCB I/C.(2) 18 Steps

Microprocessor APFC Relay with

sensitivity 10mA.(3) 4 no. 50 kVAR

capacitor bank with 125A TP Thermal

Magnetic MCCB & 50 kVAR Capacitor

duty contactor with timer(4) 3 no.

kVAR capacitor bank with 100A TP

Thermal Magnetic MCCB & 40 kVAR

Capacitor duty contactor with timer.(5)

1nos. 30 kVAR capacitor bank with 63A

'D' curve MCB & 30 kVAR Capacitor duty

contactor with timer.(6) 2 nos. 20 kVAR

capacitor bank with 40A 'D' curve MCB &

20 kVAR Capacitor duty contactor with

timer.(7) 2 nos. 10 kVAR capacitor bank

with 20A 'D' curve MCB & 10 kVAR

Capacitor duty contactor with timer.(8)

nos. 5 kVAR capacitor bank with 16A 'D'

curve MCB & 5 kVAR Capacitor duty

contactor with timer.(9) 2no. 2 kVAR

capacitor bank with 16A 'D' curve MCB &

2 kVAR Capacitor duty contactor with

timer.(10) 1 no. 1 kVAR capacitor bank

with 16A 'D' curve MCB & 1 kVAR

Capacitor duty contactor with timer.(11)

All capacitors shall be Gas Filled type with

dielectric losses ≤ 0.2w/kVAR. (Suitable

for 0.95 or better Correction).

1.3.1 SITC of Lighting Distribution Board 2 Nos. 7,494.00

(LDB) as under:

3 Phase 4 Wire TPN, 6 way Prewired LDB

(One each for Indoor & Outdoor Lighting)

Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.)

& 16A SP MCB 'C' curve (9 nos.)

(At Panel Room)

1.3.2 SITC of Power Distribution Board 1 Nos. 10,009.00

(PDB) as under:

3 Phase 4 Wire TPN, 8 way Pre-wired-

MOG / MOV PDB for Auxiliary

accessories Load power supply (For MOV

Pump delivery valves, valve at Header &

for auxiliary load & spare):

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 10 Nos. 32A 4P MCB 'C' Curve

1.3.3 Local Control Station 7 Nos. 4,840.00

SITC of Pendant type ON_OFF (E-Stop)

LCS pushbutton set complete with

Enclosure, necessary mounting/ fixing

arrangement on wall / pipe support etc. to

be installed near motors for remote

operation, etc. as per IS and specifications.

(Including structural steel)

(For 7 Nos. for Pumps)

1.3.4 SITC of Pendant type ON_OFF LCS 2 Nos. 2,800.00

pushbutton set complete with Enclouser,

necessary mounting/ fixing arrangement on

wall / pipe support etc. to be installed near

motors for remote operation, etc. as per IS

and specifications (including structural

steel) (For 2 no. Chlorine Booster pump)

1.3.5 SITC of Local Control Station with 8 Nos. 4,500.00

pendant type Open_Stop_Close pushbutton

set and with Open, Close, Trip & Local /

Remote Indicating Lamps complete with

Enclouser, necessary mounting/ fixing

arrangement on wall / pipe support etc. to

be installed near motors for remote

operation, etc. as per IS and specifications

(including structural steel)

(For 7 Nos. Actuator Pumps delivery

Valves,1 no. Header Valve)

2.1.1 LOW VOLTAGE (LT) CABLES 1355 Mtr 1,211.00

Supply and unloading & delivery at site,

storage & security at site of 1.1 kV,

A2XFY/2XWY XLPE insulated (IS 7098)

/ PVC insulated (IS 1554) AL conductor

cables as per specification & IS. The cable

when laid outside the building shall be laid

underground in excavated trench, as per

specified method and shall be laid in

prepared trench on cable tray when laid

inside the building.3.5C x 400 sq.

mm.A2XFY Cable (8 Runs for Tr. 1 & 2 to

2.1.2 3.5C x 300 sq. mm. A2XFY Cable (2 Runs 120 Mtr 954.00

for each APFC Panel)

2.1.3 3C x 300 sq. mm. A2XFY Cable (2 Runs 420 Mtr 815.00

for PMCC Panel to each Main Pump )

2.1.4 4C x 6 sq. mm. A2XFY Cable (For WR- 400 Mtr 78.00

DB with TPN MCB at Sump & Pump

House, Outdoor LDB, Indoor LDB,.Each

2.1.5 4C x 10 sq. mm. A2XFY Cable (For TPN 100 Mtr 97.00

MCB for Outdoor light)

2.1.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 300 Mtr 81.00

TPN MCB for EOT at Pump House &

Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor,

Chlorination system, Each MOV at Main

Pump and MOV at Header and Outdoor

2.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For 400 Mtr 175.00

Each Motor space heater(as required), HT

Panel, for 2nos. APFC CT & X'mer

marshaling box Single Phase Supply, for

2.1.8 5C x 1.5 sq.mm. 2XWY/2XFY Cable (For 200 Mtr 130.00

2 no. Chlorine Booster Pump LCS)

2.1.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For 400 Mtr 113.00

Each Pump Motor LCS with Ameter, 2 no.

Chlorine Booster Pump LCS)

2.1.10 10C x 1.5 sq.mm. 2XWY/2XFY Cable 400 Mtr 230.00

(2Run Tr. to HT Panel control cable)

2.1.11 12C x 2.5 sq.mm. 2XWY/2XFY Cable 250 Mtr 390.00

(For Actuator LCS of Each Pump, 1Run

Tr. to HT Panel control cable)

2.1.12 10Tride x 1.0 sq.mm. individual triad and 300 Mtr 460.00

overall shielded with aluminum mylar tape

Signal Cable for RTD & BTD of

motor(For Each Main Motor)

2.2.1 CABLE END TERMINATION AND 32 Nos. 1,441.00

SITC of Double compression Weather

proof type Ni-Plated brass cable glands and

crimping type Bimetalic lugs / sockets with

necessary tools and equipments as

specified in specifications and IS.

The glands and lugs / sockets shall be

suitable for cable size and type mentioned

below & as per specificaitons.

1) Earthing the glands and armouring with

earthing clamp and jumper and also

connecting to common earth bar.

2) The job also includes, if necessary,

supply & fixing of extension busbar of

same material on MCCB or panel board

terminal / connector to connect more than

one no. of parallel cables or to connect

higher size cable to lower size unit. The job

also includes earthing the glands and

armour of the cable with common earth bar

or flexible copper mesh.(Cable termination

qty. shall be as per site requirement)

3.5C x 400 sq. mm.A2XFY Cable (8 Runs

for Tr. 1 & 2 to PMCC Panel)

2.2.2 3.5C x 300 sq. mm. A2XFY Cable (2 Runs 8 Nos. 1,009.00

for each APFC Panel)

2.2.3 3C x 300 sq. mm. A2XFY Cable (2 Runs 28 Nos. 960.00

for PMCC Panel to each VT Pump )

2.2.4 4C x 6 sq. mm. A2XFY Cable (For WR- 30 Nos. 111.00

DB with TPN MCB at Sump & Pump

House, Outdoor LDB, Indoor LDB, Each

2.2.5 4C x 10 sq. mm. A2XFY Cable (For TPN 12 Nos. 128.00

MCB for Outdoor light )

2.2.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 70 Nos. 77.00

TPN MCB for EOT at Pump House &

Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor,

Chlorination system, Each MOV at Main

Pump and MOV at Header and Outdoor

2.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For 24 Nos. 75.00

Each Main Motor space heater(as

required), HT Panel, for 2nos. APFC CT &

X'mer marshaling box Single Phase

2.2.8 5C x 1.5 sq.mm. 2XWY/2XFY Cable (For 4 Nos. 150.00

2 no. Chlorine Booster Pump LCS)

2.2.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (Fo. 10 Nos. 89.00

Each Motor LCS with Ameter, 1no.

Chlorine Booster Pump LCS)

2.2.10 10C x 1.5 sq.mm. 2XWY/2XFY Cable 8 Nos. 185.00

(2Run Tr. to HT Panel control cable)

2.2.11 12C x 2.5 sq.mm. 2XWY/2XFY Cable 13 Nos. 129.00

(For Actuator LCS of 9 nos. Pump and

Header, 1Run Tr. to HT Panel control

2.2.12 10Tride x 1.0 sq.mm. individual triad and 18 Nos. 230.00

overall shielded with aluminum mylar tape

Signal Cable for RTD & BTD of motor

(For Each Main Motor)

3.1.1 CABLE TRAY 200 Mtr. 615.00

SITC of GI ladder type cable trays with

side channels of size - 75 x 15 x 15 mm/

100 x 15 x 15 mm & rungs of size - 35 x15

x 15 mm spaced at 250 mm apart,

fabricated from 2 mm thick sheet steel in

standard length of 2.5 meter, duly hot

dipped galvanized after fabrication as per

IS 2629- 1989/ IS 4759-1984 including

accessories such as coupler plates/ fish

plates, bends, tees, reducers, elbows,

covers and electro- galvanized hardware

etc, erected on existing support as per

specification and instruction of engineer in

750 x 100 mm - Ladder type

3.1.2 450 x 100 mm - Ladder type 200 Mtr 506.00

3.1.3 150 x 100 mm - Ladder type 360 Mtr 402.00

3.1.4 SITC of GI perforated type cable trays 100 Mtr 541.00

with returned edge/ flange, fabricated from

2.0 mm thk sheet steel in the standard

length of 2.5 mtrs, duly hot dipped

galvanized after fabrication as per IS 2629-

1989 / IS 4759-1984 including accessories

such as coupler plates/ fish plates, bends,

tees, reducers, elbows, covers and electro-

galvanized hardware etc, erected on

existing support as per specification and

instruction of engineer in charge.

300 x 50 mm - Perforated type

3.1.5 150x 50 mm - Perforated type 100 Mtr 336.00

3.2.1 Cable Trench, Laying & Installation of 100 Mtr 46.00

Cable: Making cable trench in soft soil of

suitable width of 90cms deep for laying

cable all over the run and back filling the

same and making the surface as normal

ground as per IS & Specification. (For

laying HT & LT cable in ground)

3.2.2 Cable Covering in Trench: Cable 100 Mtr. 133.00

Covering with second class bricks or

cement tiles laid cover the cable crosswise

& also on both side with covering of

7.5cms. Layer of sand above & below

cable (16 bricks per meter.) as per IS &

Specification. (For HT & LT cable trench)

3.2.3 Supply, laying and erection of 120 mm 100 Mtr 136.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming

to IS 14930 II) with necessary connecting

accessoies of same material at required

depth for laying of cable below ground /

road surface for enclosing cable and back

filling the same to make ground as per

original. (For HT & LT cable).

DWC Length is Approx. Provide as per

Actual Site Requirements.

3.2.4 Supply, laying and erection of 90 mm 100 Mtr 95.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming

to IS 14930 II) with necessary connecting

accessoies of same material at required

depth for laying of cable below ground /

road surface for enclosing cable and back

filling the same to make ground as per

original. (For Pump cable) DWC Length

is Approx. Provide as per Actual Site

3.2.5 Supply, laying and erection of 50 mm 100 Mtr 62.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming

to IS 14930 II) with necessary connecting

accessoies of same material at required

depth for laying of cable below ground /

road surface for enclosing cable and back

filling the same to make ground as per

original. (For LT & Street light cables).

DWC Length is Approx. Provide as per

Actual Site Requirements.

4.1.1 CHEMICAL EARTHING SYSTEM 5 Nos 10,489.00

SITC of Maintenance free chemical

earthing (copper) with earthpit of minimum

bore size dia. 225mm Safe Earthing

Electrode consisting Pipe-in-Pipe

Technology as per IS-3043:1987 /Tech

spec. made of corrosion free Pipes having

Outer pipe dia of 48 mm having (plating

thickness as per IS) copper plating, Inner

corrosion free Hot dip galvanised (plating

thickness as per IS) pipe dia of 26 mm with

copper flat strip type connection terminal

14mm dia with constant ohmic value

surrounded by highly conductive corrosion

resistant chemical compound with high

charge dissipation suitable for electrical

installation & of 3Mtr. length of Pipe with

two nos. 25Kg. bag of Back filling

NOTE: Earthing Resistance value & date

shall be painted on the chamber cove

(2nos. Each for neutral of Tr.-1 & 2, HT

4.1.2 SITC of chemical earthing with earthpit of 14 Nos 7,025.00

minimum bore size dia. 225mm Safe

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS-3043:1987 made of

corrosion free G.I. Pipes having Outer pipe

dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising or

copper coated solid steel road / flat strip

type connection terminal 14mm dia with

constant ohmic value surrounded by highly

conductive corrosion resistant chemical

compound with high charge dissipation

suitable for electrical installation of 11 kV

& 440V of 2Mtr. length of Pipe with one

no. 25Kg. bag of Back filling compound.

(2nos. Each for body of Tr.1 & Tr.

4.2.1 SITC of pipe type earthing having 150 cms 17 Nos 365.00

long and 2.5cms dia. Galvanised iron pipe

with coupling and buch buried in specially

prepared earth pit complete with necessary

8 SWG earth wire

(For Each St. light Pole Earthing &

2nos.Gate light earthing)

4.2.2 SITC of 50mm(w) x 6mm(T) etc. sizes as 575 Kg 77.00

required, HOT deep GI Strip including

supply & fixing using GI spacers, saddles

when laid inside the building and inclusive

of excavation & refilling of earth when laid

outside the building & interconnection with

earth pit & all electro-mechanical

(50X6 G.I Strip wt.2.3 kg/m,

(HT Panel, Transformer, Motors etc.)

4.2.3 Supply, laying and erection of 25mm(w) x 120 Kg 77.00

6mm(T) etc. sizes as required, HOT deep

GI Strip including supply & fixing using

GI spacers, saddles when laid inside the

building and inclusive of excavation &

refilling of earth when laid outside the

building & interconnection with earth pit &

all electro-mechanical equipments.

(25X3 G.I Strip, 0.6 Kg/m, 0.6x

(LT & APFC Panel etc.)

4.2.4 Supply, laying and erection of 40mm(w) x 188 Kg 787.00

6mm(T) etc. sizes Copper Strip including

supply & fixing of bolts, saddles when laid

inside the building and inclusive of

excavation & refilling of earth when laid

outside the building & interconnection with

earth pit & Tr. nutral.

(40X6 Cu. Strip, 1.88 Kg/m, 1.88 x

4.2.5 Supply, laying and erection of 40 mm(w) x 188 Kg 77.00

6 mm(T) etc. sizes as required, HOT dip

galvanized GI Strip including supply &

fixing using GI spacers, saddles when laid

inside the building and inclusive of

excavation & refilling of earth when laid

outside the building & interconnection with

earth pit & all electro-mechanical

(40X6 G.I Strip wt1.88 Kg/m, 1.88 x

4.2.6 SITC of HOT Dip Galvanized iron strip 52 Kg 77.00

wire 8 SWG (For LDB, PDB, LCS,

St.Light Pole, etc.)(8 SWG G.I Strip,

5.1.1 INTERNAL WIRING 410 Mtr 110.00

SITC of Mains & outlet points wiring with

1.1 kV grade FRLS PVC insulated ISI

marked flexible stranded copper conductor

wires with medium class min. 25mm.

dia. Rigid PVC pipe and accessories to

be erected concealed in / to be run on

surface / wall / ceiling with following sizes

as mentioned below. The unit rate wirings

shall be with connector, PVC junction box,

wires, holder, ceiling rose, angle holder,

switch, sockets, switch board, brass

chromium / cadmium plated machine

screws, phase and neutral wires, green

Earth continuity wires etc. as required to

complete wiring from LDB panel to the

final outlet termination points. The wiring

shall be as per IS:732, IS:4648 and

as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire

5.1.2 As per Above (b) SITC of Mains wiring 200 Mtr 128.00

with 3 wire 2.5 sq.mm as per tender

specification & IS.

5.1.3 As per Above.-7.1.1 (c) SITC of Mains 200 Mtr 118.00

wiring with 4 wire 1.5 sq.mm as per tender

specification & IS.

5.1.4 As per Above-7.1.1 (d) SITC of Mains 200 Mtr 151.00

wiring with 4 wire 2.5 sq.mm as per tender

specification & IS.

5.2.1 SITC of Point wiring for Light / Bell/ 85 Nos 415.00

Primary Point with 2nos. 1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, length

, pipe to be erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on

PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed with medium class Rigid PVC

pipe & accessories..

5.2.2 SITC of 6A independent Plug with 2 nos. 14 Nos 593.00

1.5 sq.mm Cu. Mains size wiring &

earthwire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wiress with

medium class rigid pvc pipe erected with

ISI marked 3 / 5 Pin socket and 6A

Modular type switch and accessories with

earth continuity of following type erected

on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(1 No. Torrent HT Room, 1 No. for AMC

HT Room, 8 nos. at Pump House cum LT

Room & 4 No. Chlorination Room)

5.2.3 SITC of One 300/380 mm dia. Ex fan 16A 2 Nos 782.00

independent Plug point near Ex. Fan with

2nos. 4 sq.mm Cu. Mains size wiring

& earthwire of 1.5 sq.mm (green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires with

medium class Rigid PVC pipe and

accessories to be erected complete with

Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered

with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of accessories.

Plug point shall be near Ex.Fan. (For

Nos. Chlorination Room)

5.2.4 SITC of 5/15A independent Plug with 12 Nos 782.00

2nos. 4 sq.mm Cu. Mains size wiring &

earthwire of 1.5 sq.mm (green) both are

of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires with

medium class Rigid PVC pipe and

accessories to be erected on wall / ceiling,

complete withModular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate

modules erected on / in wall / ceiling as per

pipe erected with following type of

(For 1 no. Torrent HT Room, 1 no. AMC

HT Room, 1 no. Chlorination Room, 9 nos.

Pump House cum LT Room)

5.2.5 SITC of Single Phase 20A 3 Pin Metal clad 5 Nos. 845.00

Industrial Type Socket with plug top and

20A SPMCB, suitable for flush mounting,

in 16 SWG MS box of suitable size and

covered with 3 mm thick electrical grade

hylam sheet or eqivalent ISI marked

Electrical grade bakelite sheet and

earthing with 2.5 sq.mm insulated copper

wire run inside the conduit including

interconnections etc. complete as required.

(4 Nos. Pump House cum LT Room &

1no. HT Panel Room)

5.2.6 SITC of 3 watts LED Lamps integral 3 Nos. 69.00

type,cool white with PC diffuser suitable

for B22 LAMP holder.(For Panel room,

HT Room & chlorine room door)

5.2.7 1200 mm sweep ceiling fan, capacitor 12 Set 1,581.00

type, having double ball bearing 450mm

down rod, canopies, shackle, rubber bush,

blades, electronic speed regulator, suitable

to operate on 230V,50Hz AC supply

conforming to IS: 374/1979.Fan shall be

painted with white colour.

(1 Nos office room, 9 Nos LT Panel Room

Cum Pump House, and 1 No. HT Room

and 1 No.Torrent Room )

5.2.8 380 mm sweep 1400 R.P.M exhaust fan, 2 Nos. 3,052.00

capacitor type, having double ball

bearing, M.S.blades, mounting frame,

forearms, suitable to operate on 230V,50

HZ AC supply conforming to IS: 2312.Fan

shall be painted with epoxy grey colour

controlled by one 6 A flush type switch on

board and 6A plug point near Ex. fan.

(For 2 Nos. Chlorination Room)

6.1.1 LED LIGHT FIXTURES: 16 Nos 530.00

SITC of Indoor wall mounting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA polyester powder coated and

high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with

company mark/name 120 to 300 V,Power

Factor more than 0.9, THD < 10 %, CCT

4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80

36 Watt or up to 25% higher wattage

Tube Light with integral / non-integral

driver, Surge-2KV, IP-20, 4 feet, Cat-III

(For 2nos. Torrent HT Room, 2nos. AMC

HT Room, 10 nos. pump House cum LT

Room, 2no. Chlorination Room)

6.2.1 SITC of Surface/Wall mounted LED 17 Nos. 6,028.00

Indoor Flood light fittings with High power

White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire

efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80

90 Watt Indoor Flood Light (IP-65),

Surge -4KV Cat-III

(15Nos for pump house cum LT Panel

room, 2 Nos Chlorination room)

6.2.2 SITC of 'B' class galvanised iron pipe 32 17 Nos. 340.00

mm outside dia 45 cmslong duly welded on

20 cms x 20 cms x 3 mm thick M.S. base

plate, erected on wall or corner for

mounting luminaire with necessary

hardware materials duly painted for wall

mounting indoor flood light fixtures on

Wall of Buildings.

7.1.1 EXTERNAL LED LIGHT FIXTURES 20 Nos. 6,028.00

SITC of Wall mounted 80W LED

Outdoor Flood Light fittings with High

power White LEDs wattage of 1Watt and

above assembled on single MCPCB,

efficiency more than 130 lm/w and

corrosion free High pressure die cast

aluminum housing with smooth finish

powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name

engraved or embossed 120 to 300 V,Power

Factor more than 0.95, THD < 10 %, CCT

5000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 85 lumens/watt . LED

driver efficiency > 85 %. ( Each fittings

required LM-79 & LM-80 certificates)

Flood Light (IP-65), Surge -4KV,

(20 Nos for Area Lighting)

7.1.2 SITC of 'B' class galvanised iron pipe 20 Nos 340.00

32 mm outside dia 45 cms long duly

welded on 20 cms x 20 cms x 3 mm thick

M.S. base plate, erected on wall or corner

for mounting luminaire with necessary

hardware materials duly painted for

wall mounting indoor & outdoor flood

light fixtures on Wall of Buildings.

8.1.1 SAFETY ACCESSORIES 6 Nos 8,586.00

SITC of following safety accessories

complete with necessary fixing brackets,

other accessories and tools etc. as

required to complete the job.

Supply & Erecting carbon dioxide (CO2)

fire extinguisher of 6.5 kg capacity with

necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall

8.1.2 Supplying stand first AID box with 4 Nos. 297.00

anticeptic cream, medicine for use on

wounds due burn, crepe bandage, guage

bandage, medicated ready to use bandage

(Band-aid) adhesive tape for medicinal

user, scissors, anticeptic solution (Savlon

or similar) etc.

(All above contents shall be of standard

(For Pump house Cum LT Room)

8.1.3 Providing printed instruction (First Aid) 3 Nos. 129.00

Chart both in English and Gujarati and

duly framed with front glasses, for

treatment of person suffering from electric

(1no. for HT Room & 1no. For LT Room

Cum Pump house))

8.1.4 Supplying & fixing of FIRE bucket 4 Set 212.00

round bottom of 9 litres capacity made out

of 24 guage G.I. sheet with extra handle at

bottom duly painted white inside and Red

outside with FIRE mark, filled with dry

sand and kept on stand provided or hung

8.1.5 Supplying and erecting floor mounting 1 Nos. 933.00

stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length,

900 mm height frame made out of 30mm X

30 mm X 4 mm angle iron with cross

supports for legs, welded with 4 hooks and

duly painted with one coat of red lead and

two coats of approved enamelled silver

8.1.6 Supply and fixing of 30 W fluorescent 1 No. 6,319.00

lamp operated emergency light with

maintenance free battery for 3 hours

operation during mains power failure.LED

Portable/Rechargeable flood light having

die - cast aluminium enclosure designed

for maximum thermal efficiency of 130lm

luminous efficiency at voltage supply

between 140-270V AV/12V DC at

operating temperature of -20 degree to

60degree celcius with battery back up 3-

8.1.7 Supply and laying of Synthetic Insulating 6 Sq. 1,017.00

Mat of Class - B of min. thickness 2.5 mm Mtr

as per IS:15652 and with good electrical

insulation property for 11kV/22KV as per

site requirement.

8.1.8 Supply and laying of Synthetic Insulating 16 Sq. 763.00

Mat of Class - A of min. thickness 2 mm as Mtr

per IS:15652 and with good electrical

insulation property for 1.1KV/3.3KV as

per site requirement.

(for PMCC & APFC etc. Panels)

8.1.9 Providing pair of rubber hand gloves ISI 2 Nos. 212.00

make suitable for working on 22 KV

9.1.1 DISMANTLING, SHIFTING AND RE- 2 JOB 40,000.00

INSTALLTION (Existing Transformer)

Dismantling, Shifting and Re-installtion of

Transformers including loading, shifting

& unloading, Cable Connection and

Termination, all other required work for

complete job at site or as per instruction

given by the engineer In-Charge.

9.1.2 DISMANTLING, SHIFTING AND RE- 1 JOB 40,000.00

INSTALLTION (Existing HT VCB

Dismantling, Shifting and Re-installtion of

HT VCB Panel including loading, shifting

& unloading, Cable Connection and

Termination, all other required work for

complete job at site or as per instruction

given by the engineer In-Charge.

10.1.2 MISCELLANEOUS: 500 kg 64.83

Providing, Supply of Structure Steel at site

of work with freight, loading, unloading

carting, etc. including all taxes and duties

complete such as joints, channels, angles,

Iron Rails, ISA/ISMC/ISMB/MS flat,

Plates, Chequered plates (below 10mm

thickness) etc. required for support

structure of Elecrto-Mechanical

equipments etc. for support on floor / wall /

beam / brackets etc. as per tender and IS.

10.1.2 Labour Charges for lowering, laying, 500 kg 11.36

Fixing with fabrication various size section

of MS such as joints, channels, angles, Iron

Rails, ISA/ISMC/ISMB/MS flat, Plates,

Chequered plates etc Complete with two

coats of red oxide and two coats of

approved colour shade of epoxy paint as

per relevant IS and as per specification.

11.1.1 LIASONING CHARGES FOR 1 Ls 25,000.00

OBTAINING POWER / NOC:

Liasoning Charges for obtaining N.O.C

from Electrical Inspector / Statutory

authority for Power / Ele. Installation.

(Fees shall be paid by tenderer for

obtaining N.O.C. from Electrical Inspector

/ Statutory authority on behalf of client and

shall be reimbursed on submission of

orignial receipt to Client). Liasoning

Charges shall include preparing required

attasted documents & drawing for

obtaining NOC on behalf of client

(Applicable Fees / deposits shall be

reimburse by Client).

TOTAL ESTIMATE OF ELECTRICAL WORK (Without GST)

Name SITC of New Pumping Machinery with related Mechanical, Electrical and Instrumentation

of works with Five Years Operation and Comprehensive Repairing & Maintenance Work For

Work Augmentation of Underground Tank No.-5 at Dudheswar Water Work of AMC.

INSTRUMENTATION WORK

Item Qty Unit Amount

1.1.1 PRESSURE MEASURING SYSTEM 8 Nos. 1,412.00

Supply, installation, testing & commissioning of

Bourden type Pressure Guage glycerene filled

having 150 mm dial with necessary

fittings/accessories (Manifold valve, nipples, etc.

shall be in SS 316 only) as per specifications &

complete in all respects.

Range : 0 - 6 kg / sq.cm.

(On Each Delivery Side of VT Pump & 01 Nos

for Header Pipe).

1.1.2 Supply, installation, testing and commissioning of 7 Nos. 29,147.00

Blind Pressure Transmitter along with,

manifold valve, required fittings, tubing (all

valves, fittings, tubings, etc. shall be in SS

only) all accessories, hardware, etc. complete in

all respects as per specifications and having

following measurement ranges:

Range : 0 - 6 Kg/cm² (On Delivery of Side of

1.1.3 Supply, installation, testing and commissioning 1 Nos. 29,147.00

of Digital Pressure Transmitter with Display

along with, manifold valve, required fittings,