PROVN OF EQUIPMENT ROOM FOR HOUSING SOFTWARE DEFINED RADIO(SDR) EQUIPMENT WITH ATTCHED TOILET IN MISSAMARI UNDER GE MISSAMARI

Amount

Surface dressing in soft loose soil n exc 15 cm deep and getting out.

Excavating in trenches n.exe. 1.5 m width and n.exe. 1.5 m in depth for foundation in soft/loose soil & getting out.

All as per item no 02 above but depth exc 1.50 m not exc 3.00 m deep.

Returning filling in , including spreading,levelling,watering & well ramming in layers not exc 25 cm.

Removing excavated material n exc 50 m & depositing where directed at a level n exc 1.5 m.

M&L cement concrete with PCC type D2 1:4:8 using 40mm graded aggregate as in foundation.

M&L for M25 RCC design mix using 20 mm graded aggregate for raft foundation footing ,bases of columns, plinth beams & mass concrete.

M&L for M25 RCC design mix using 20 mm graded aggregate for columns, pillars,posts and struts.

M&L for M25 RCC design mix using 20 mm graded aggregate for beams, cantilevers, lintels over 1.5 m span.

M&L for M25 RCC design mix using 20 mm graded aggregate for slabs supported on walls, beam and and columns in floors, roofs, landing, balconies, canopies, deck slabs and in selves all as directed complete.

M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete.

S & F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as in including cutting, bending and binding with mild steel not less than 0.9 mm dia (annealed) all as directed complete.

Form work for foundation footing , bases of columns &plinth beams similar work vertical or batter.

Form work to side & soffits of floor or roof beams lintels & similar works.

Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M&L for Pre-cast cement concrete block masonry type B-1, 1:2:4 (using 20mm grade aggregate ) with solid blocks, exc. 10 cm in width and setting in mortar,complete and all as directed.

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @3% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement.

M&L rendering 5mm thick on other than fair faces of concrete Surfaces in cement mortar 1:3 finished even and smooth.

Supply only integral WPC

M&L for 75 mm thick pcc 1:3:6 type C2 using 40mm graded aggregate as in plinth course as directed by engineer in charge.

M&L Sand filling under floors or in foundations including watering and conosoldiation.

M&L for broken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface.

M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base.

Non skid ceramic colour joint free tiles 7 to 8 mm thick area each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in net cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 complete all as specified and as directed.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors & skirting etc. set and jointed in net cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately).

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), in?cluding all mould- ings but excluding frame Type B0 1:2:4 (12.5 mm graded aggregate) set in cement mortar 1:4 .

Providing precast cement concrete in win dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings,throat- ing etc. and setting in mortar complete with joints to match Type B0 1:2:4 (12.5 mm graded aggregate) set in cement mortar 1:4 .

S&F 150mm long aluminium anodised barrel tower bolts of extruded section.

S&F stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F aluminium handle cast type anodised 150mm size

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor .

All as per item No 39 here in before but 25mm dia

S&F 25 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S&F 15mm bore bib tap cast copper alloy fancy type chromium plate with crutch or butter fly handle screwed down for iron pipe but fancy type.

S&F 15mm bore stop cock/valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete.

S&F PVC connection pipe 600mm long with two nos PTMT nut threaded coupling for 15mm dia.

S&F Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed.

S&F Chromium plated brass fancy soap dish, complete all as specified and as directed.

Supply and fix CP 15mm dia Health Faucet with 1.2 to 1.50 Metre Tube & Hook (as approved) and fixed, complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), complete all as specified and as directed.

S&F plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repair, complete all as specified and as directed.

S&F10 litre capacity PVC type low level flushing cistern with inlet ball valve, float and handle/push flush type brackets etc complete .

S&F vitreous china wash basin white, flat back, size 550x400mm excluding taps , waste ,but including barkets.

S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms).

S&F Toilet paper holder, vitreous China, box type complete all as specified and as directed.

S&F 100mm dia PTMT grating.

S&F 75 mm thick PVC (SWR pipes single socketed in any length with rubber ring joints laid in trenches or floors.

M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) Vent Cowl

Hoisting & fixing 500 litres Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all position all as specified in SSR part -I incl all necessary fittings.

S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed.

Supply and fixing mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 complete all as specified and as directed.

M&L priming plastered and other surfaces with alkali-resistant priming paint complete all as specified and as directed.

M&L two coats of distempering walls with distemper emulsion or tinted including preparation of surface .

providing and applying plaster of paris putty of 2mm thickness over plastered surfaces to prepare the surface even and smooth copmlete all as specified and as directed.

M&L TWO coat of white wash on Ceiling surface including preparation of surface..

M&l for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted ) with silicon additives @1.43 litre / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm over new surfaces

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for forming 12mm thick expantion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A'

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.

M&L 15mm thick cement plaster on brick or concrete walls finishing fair and even in in cement mortar 1:4 with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions) on roof slab/ concrete surfaces for APP membrane complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top treatment complete all as specified and directed. (i) Screed bed or bedding layer 10 mm thick in CM 1:4 as in roof Slab including preparation of surface to receive screed bed. (ii) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (iii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen. (iv) Applying two coats of aluminum paint over the APP membrance .

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face &2mm prelam PVC Sheet on back face supplying & fixing in frame at site as specified and as directed.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs hinges, lock, strike plate etc.complete for frame of size-105x60mm

S&F Flat iron base tie confirming to Fe 290 gde E-165 size 25x3mm .

M&L for pcc 1:3:6 type C-0 in filling of pressed frame.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.complete all as apecified and as directed.

S&F Door closer hydraulically regulated, designation No. 3, universal type, Aluminium (Excurted body) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as apecified and as directed.

S&F Harrison rails, Aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. and complete all as apecified and as directed.

S&F FOR 0.71MM thick Plain Aluminium sheeting Alloy 31000 H4 in stepped flashing and complete all as specified and as directed.

M&L For 25mm thick pre-formed filler for CRUMPLE joints complete all specified and as directed.

M&L FOR Joint Sealing Compound Grade “A” Confirming to IS-1838 OF 1961 complete all as specified and as directed.

Demolition for Reinforced in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition)

M&L for renewal for rust particle from reinforcement of any diameter using wire brush/emery paper of by grinding and applying two coats of NITO ZINC PRIMER for protection of corrosion to old and new reinforcement as per manufactures instruction, complete all as specified and as directed.

M&L for applying NITO BOND EP for bonding of new concrete with old concrete surface all as per manufacture instruction, complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceilings and apply three coats of white wash , complete all as specified and as directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose of soil complete

Excavation over area, exceeding 3m but not exceeding 4.5m deep and getting out in any type of soil complete.

Brick work with sub class ‘B’ bricks, curved on plan mean radius not exceeding 6m, built in cement mortar 1:4 complete.

Brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete.

Loose filling with aggregate of broken bricks of gauge 40 to 80mm in soakage pits, soakage wells, etc complete.

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

Form work to edges of concrete flats, openings, floors & roofs and sides of RCC/PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete complete.

Mild steel bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, conforming to Fe-410-0 or Fe 310-0 complete.

Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in foundation filling and mass complete.

Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete.

Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for fixing of MS rungs complete.

Cast iron (spun) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, 100 mm bore complete.

Cast iron cowls, 100 mm bore with cement joints complete

Concrete bed to drain pipes including packing under and haunching against the sides of pipes with cement concrete 1:3:6 type C-2 after they are laid and tested,200 mm bore pipe.

Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in water troughs and coping.

Supply laying and testing of 200mm dia of DWC high dencity (HDPE) pipe ISI MARKED with and including all fitttings and jointing materials for sewage line and laid in trenches as specified and as directed Reinforced concrete pipes, class NP2, laid and jointed complete with collars drain pipes 200 mm bore laid in trenches and jointed as specified.

Rendering 15mm thick CM 1:4 on fair faces of brick work or concrete as in internal wall surfaces using water proofing compound, finished even and smooth without using a extra cement Note : WPC shall be measured and paid separately.

M & L for concealed type point wiring with 1.50 sqmm (noninal area) FRLSH insulated and unsheathed muld stranded copper conductor cable 1100 Volts grade,single core,laid in and including rigid PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade,single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point cotrolled by one way switch duly fixed with copper lugs and PVC flexible pipe from ceiling rose to fitting/fixtures complete all as specified and directed. (a) One light/fan point controlled by one switch Make :- Havells / Polycab / RR Kabel / KEI

(b) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 1 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed. Make :- Havells / Polycab / RR Kabel / KEI

S & F Switch piano(White) flush type single pole one way 5 Amp, 230 Volts complete all as specified.

S & F Socket outlet (White) 2 in 1, 3 pin, 5 Amps complete all as specified and directed.

S & F Switch socket combination (White) flush type multipurpose 3/5 pin 5 Amps two in one , 230 volts complete all as specified.

S&F Switch socket combination (White) 2 in 1 3 pin, 15 Amp flush type universal.

S&F Ceiling rose (White) three terminals polycarbonate , isolated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative ultra slim round profile LED lighting fixture with extruded polycarbonate , environmental friendly energy efficiebt ready to use pack with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make :- Havells / Crompton / Philips

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape duly fixed with Clamps nuts and bolts complete all as directed by Engineer-in-Charge. Make- Havells /CG / Philips/surya

Supply and fixing ceiling fans complete without remote, blades, down rods, electronicregulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed . Make USHA / Crompton / Havells / Orient

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Make Havells / Crompton / USHA / Orient

M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed. Make :- Havells / Polycab / RR Kabel / KEI

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified . Make-L&T or equivalent in Schneider/ Legrand/ seimens.

S & F MCB FP 415 volts suitable for fixing in MCB TPN DB of capacity 63 amps complete all as specified and directed. Make-L&Tor equivalent in Schneider/ Legrand/Seimens.

S & F MCB 'B' series single pole 5 to 32 Amps, breaking capacity 10KA. Make: Legrand or equivalent of L&T/ Schneider/Seimens

S & F Double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of Capacity 20 Amps complete all as specified and directed. Make:- Legrand / Schneider/ Seimens/L&T

Supply & Laying XLPE LT heavy duty UG Cable of size 25 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary aluminium lugs after cutting to required length complete all as specified and directed. Make :-Havells / Polycab / KEI / RR Kabel / Gloster

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. NOTE : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

Supply and Fix Cable end termination kit for LT 1.1 KV Cable for Cable 25 Sqmm 3.5 Core cable complete all as specified and directed .

Supply and fix 3- layer PP-R Polypropylene pipes of outer dia 50mm random copo- lymer) conceal- ed pipes SDR 7.4 (PN16) UV stabi- lized and antimi- crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings required such as Tees , Elbow , Bends reducers , etc fixed complete to walls, ceilings or in floors etc complete all as specified and directed

Supply and fix 3- layer PP-R Polypropylene pipes of outer dia 32mm random copo- lymer) conceal- ed pipes SDR 7.4 (PN16) UV stabi- lized and antimi- crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings required such as Tees , Elbow , Bends reducers etc including union for each rising mains complete fixed complete to walls, ceilings or in floors etc complete all as specified and directed

Material & Labour for Cutting existing steel tubing of size 50/63 mm dia for alterations or additions (Each cut measured) properly finiished complete all as specified and directed . Note :- Any damage occured during cutting of existing pipeline to be repaired by the contractor free of cost

Material and labour for Screwing existing steel tubing of size 50/63 mm dia for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

Supply and Fix PP-R Gate valves (brass insert) of size 32mm as per requirement of the site complete all as specified and directed.

Supply and Fix PP-R Gate valves (brass insert) of size 50 mm as per requirement of the site complete all as specified and directed.

Material and Labour for Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

Material and Labour for Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

BEE KAAY TRADERS

M/S Krishna Construction Co.

Shree Krishna Traders

M/S B.B. Singh Contractor