PROVN OF ACCN FOR DSC PLATOON CDR AND NIGHT DUTY OFFICER AT JCB BUILDING, RENOVATION OF ROOM NO 405 TO ROOM NO 410 OF 4TH FLOOR SAG MAIN BUILDING P-176 AND ADDN/ALTN TO EXISTING TWO WHEELER PARKING SHED WITH REPLACING DAMAGED SHED AND FLOORING ISSA

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, LT cable, cable duct etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per ser Item No 1 above but in hard/dense soil.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil to required slope/ gradient complete all as specified and directed

Returning, filling in, including spreading leveling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for treating the soil alongwith external perimeter of building @ 2.25 ltrs of emulsion complete all as specified and directed.

Filling in, of excaveted earth as in plinth floor including spreading leveling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded mechanical crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, Foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Chajjas complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per Ser item ser No. 14 above, but 6 to 8 mm

All as per item ser No 14.00 above but 5 mm dia and over up to 8 mm dia in stirrups, spacers and binders

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,complete all as specified and directed.

Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landings and similar work not exceeding 20cm thick (horizontal or slopping) for fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides & soffits of plinth bands , lintel band, Shelves etc including, shelves etc. complete all as specified and directed.

Use and waste of form work to chajjas and similar work for fair finish surfaces complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square metre of vertical surface (Area of the substructure in contact with back fill to be measured) complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, old size bricks , straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick Rendering in CM 1:4 on brick work or concrete surfaces mixed with WPC as per manufacturers instruction finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick plaster in CM 1:3 on concrete surface and finished the surface even and smooth with out using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone (table rubbed and polished) as in flooring set and jointed with grey cement slurry mixed with pigment to match the shade including, cutting, rubbing, grinding and polishing laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specfied and directed.

M&L for machine cut kota stone 18-20mm thick as in skirting,risers of steps set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and polishing laid over and including 10 mm thick screed bed or bedding layer in CM 1:4 complete complete all as specfied and directed.

M&L for non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed in CM (1:4) complete all as specified and directed .

M&L for granite, 18 to 20mm thick/table rubbded and polished in steps, jambs, pillars, window cills, cooking platform, shelves and the like in CM 1:2 with admixtur of pigment to match the shade of granite over and including 15 mm thick sereed bed or bedding layer of CM 1:6 complete all as specified and directed.

All as per Ser item No 36 above but in skirting, riser, step etc laid over 10 mm thick sereed bed or bedding layer in CM 1:4

M&L for preparation of new plastered surface on ceiling and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Exterior acrylic paint (weather proof / dust proof) over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of distemper oil emulsion over 2mm thick wall care putty complete all as specified and directed.

M&L for Aluminum window double shutter along with aluminum grill, size of frame 150 mm x 44.5 mm of 16 gauge aluminium section with 50 micron anodizing size of shutter top, bottom and side rail 75mm x 44.5 mm x 18 gauge & 5.50 mm thick reflector sole sheet glass to be fixed in glazed portion and stainless steel hooks & eye to be provided as stay of shutter etc complete including necessary jointing cleats, glazing clips, rubber packing , anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stay 150 mm long (01 No for each leaf) , stainless steel hinges type B-21, 100 mm long (02 Nos for each leaf), Aluminium Handle 75mm long D type (01 No for each leaf ) and 100 mm aluminium tower bolt (2 Nos in each leaf ) including galvanized mild steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (20 mm graded stone aggregate) as in plinth protection/path/floors laid in bays incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified and directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume

M&L for hard core of broken stone gauge n exc 63mm deposited and leveled in layer not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

S&F fancy type mild steel curtain rod/harrison rail with fancy type bracket. fixed with (0.075x0.075x0.075) mm teak wood gitti in cement mortar 1:3 complete all as specified and directed.

S&F 32 mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed to walls, ceilings or in floors etc complete all as specified and directed. Note:- Cutting chases for concealing the pipes & fittings etc wherever required and making good, disturbed surface in CM 1:3 shall deemed to be included in the quoted rate.

All as per item ser No 46 above but 20 mm dia

S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110mm bends any radius complete all as specified and directed.

S&F PVC P or S Trap 100/110 mm dia complete all as specified and directed.

S&F for PVC (SWR) 75 mm bore pipe in any length with rubber ring joints fixed to walls as in vent pipe incl. pvc cowl complete all as specified and directed.

S&F 15mm bore brass chromium plated fancy type concelled stop cock reduced body etc complete all as specified and directed.

S&F grating of size 125 mm CP for out let of water etc complete all as specified and directed.

S&F liquid soap containeer of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 105 grams) complete all as specified and directed.

S&F Stainless steel towel Rail of size 600 mm with lower hanger fixed to wall complete all as specified and directed.

S&F for WC Orissa pattern size 580 x 440 mm of vitreous china (white) fixed with integral footrest etc including accessories complete all as specified and directed.

S&F vitreous china wash down water closet pan pedstal pattern white excluding flushing cistern but including fixing bolts, flush pipe, PVC seat cover with aluminium hinging devices & Jet chromium plated with 1.00 mtr long PVC connection pipe 15mm bore etc complete all as specified and directed.

S&F PVC valve less syphonic action low level flushing cistern 10 litres capacity with inlet ball valve, float and handle PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC complete all as specified and directed.

S&F 15mm bore pillar taps fancy type, CP brass with capstan heads, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nut, screwed for iron pipes and fixed complete all as specified and directed.

S&F bib taps 15 mm bore chromium plated, long body fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 32 mm bore, 610 mm long and brackets complete all as specified and directed

S&F stop valves/angle valves cast copper alloy CP concealed fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as specified and directed.

S&F PVC connections 15mm dia 450 mm long with PTMT nut on both ends and washers complete all as specified and directed.

S&F ball valve PTMT high pressure with polylethylene float and fly nut complete screwed for iron pipe and fixed ,20 mm bore complete all as specified and directed.

S&F toilet paper holder Chromium Plated complete all as specified and directed.

S&F powder coated aluminium frame (100mmx63mmx1.60mm) (minimum thickness of powder coating 50 micron) for doors, with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F Overhead Shower 200x200mm Square Shaped Single Flow (Body & Face Plate Brass CP with grey face plate) with Rubit Cleaning System suitable for 15mm bore GI pipe complete complete all as specified and directed

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity triple layer fixed with and incliuding PVC tank cover, PVC tank nipples(Minimum weight 20mm-45gms) and necessary connections complete all as specified and directed

S&F UPVC Floor / Nahani Trap of self cleaning design with CP jalli of size (110x 90mm) complete all as specified and directed.

S&F UPVC Gully traps of self cleaning design with CP jalli of size (160x 110mm) complete all as specified and directed.

S&F PVC soap tray ,350X100X60mm, fixed to wall with plugs, chromium plated screws complete all as specified and directed

S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long complete all as specified and directed

S&F 25mm to 175mm hat peg sets of aluminium, solid body fixed with screws complete all as specified and directed.

S&F Gun-metal, globe or gate valves, 15 mm bore with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed

All as per item ser No. 75.00 above but bore 20 mm

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F PVC factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete all as per specification directed

S&F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in filling pressed steel frame or hold fast blocks complete all as specified and directed

S&F 35 mm thick factory made Plain framed, panelled shutter of 2nd class HW rail and style (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 35 mm thick Glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F butt hinges, 100mm mild steel cold rolled medium weight complete all as specified and directed

S&F 150mm aluminumn anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 250mm size aluminium alloy anodised sliding door bolt ( bolt type) fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 150mm aluminium handles, cast type anodised complete all as specified and directed

M&L for preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed

M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.

M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sqm on surfaces,Applying evenly a tack coat of bitumen @1.20 Kg /Sqm and a layer of APP polymer 3 mm thick membrane weight not less than 3.00 Kg/ Sqm duly sealed at over laps joints with flame (complete by torch application) again applying a coat of bitumen @1.20 Kg /Sqm on the top of APP all as per manufacturer's instructions, complete all as specified and directed. Notes:- (i) Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii) Primer shall be applied after preparing & cleaning of fully dried cement plastered surface.

M&L for PCC 1:2:4 type B-0, using 12.5 mm graded mechanically crushed stone aggregate as in roof kerbs, benching and the like, etc complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for water proofing treatment to sunken slab complete all as specified and directed comprises the following operations/stage:- (a) Rendering 15 mm thick in CM 1 : 4 mixed with water proofing compound @ 2% by weight of cement or as per manufacturer's instruction. (b) After drying of plastered surface, suitable primer such as multiplas primer/ muliplas/cold sticker/ multiplas blow bitumen 85/25 or 90/15 shall be applied/coated on the plastered surface. (c) MULTIPLAS @ 3 Kg/Sqm shall be unrolled over the coated surface (with overlap of 10 cm) and bonded completely to the primed surface and overlap sealed by the tourch flame. (d) Toping with PLASFAL @ 2 Kg / Sqm. A layer of blown bitumen of 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of PLASFAL. Note:- (i) The above water proofing treatment shall be carried out by authorised approved applicator/agency as approved by GE. (ii) Concrete filling, if required shall be measured & paid separately. (iii) WPL shall be measured & paid separately.

M&L for rolling and consolidating formation surfaces in cutting exc 8 tonne & nexc 12 tonne power roller complete all as specified and directed

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast rubber moulded coloured interlocking paver blocks of any size and shape confirming to IS-15658-2006 of 60 mm thickness, M-35 grade, glossy finish complete all as specified and directred.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in copings, kneelees, apex stores, bed plates, kerbs water trough etc and the like including use of necessary formwork complete all as specified and directed.

S&F aluminium powder coated section door shutters consisting top rail and style 82.77x44.45x1.60 mm thick, bottom and lock rail 150x44.45x1.60mm including jointing clips, aluminium snap beading, rubber gasket, glazing clips, two aluminium handles of size 200mm, 01 No. tower bolt 200 mm necessary hinges per leaf complete all as specified and directed.

M&L for Precast RCC 1:2:4 type B 1 using 20mm graded stone aggregate as in landings, manhole covers etc including necessary form work complete all as specified and directed

M&L for plain Cement Concrete 1:3:6, type C-2 using 40 mm graded stone aggregate bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe/PVC pipe complete all as specified.

M&L for providing, fixing, jointing and testing in position of ISI marked UV stablized UPVC soil, waste, and vent pipe 150mm bore, Type-B as per IS-13592 suitable for rubber ring joints, including all necessary specials and fittings (Confirming to IS-4735) i.e. bends, tees , junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, rubber rings, clean outs etc, fixing at/in trenches complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and directed

M&L Powder coated aluminium windows made out of aluminium tabular frame of section 63.5 x 38.10 x 1.6 mm thick and shutter fixed, sliding or openable horizontal and vertical members of aluminium anodized section 47.50 x 44.45 x 1.6 mm thick, aluminium beading, rubber gasket including aluminium fittings such as hinges tower bolt, stay rod and handle complete all as specified and directed. Note :- Sheet glass and boards shall be measured and paid separately.

M&L for PCC 1:3:6 Type - C-2 20mm graded stone aggregate in surface channel & drain complete all as specified and directed

M&L for forming fair finished drains or channels 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Taking down chowkaths or frames with shutters n.exc 1.50 sqm each(without taking off shutter from the frame) each complete all as specified and directed

Taking down chowkaths or frames with shutters Exc 1.5 and n.exc 4 sqm each(without taking off shutter from the frame) each complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

S&F powder coated aluminium grills(anodised transparent or dyed to required shade according to IS:1868 with minimum anodised coating of grade AC 15 of approved design and pattern with approved slandered sections and fixed to windows/ventilators frame with Aluminium chenal with CP brass/stainless steel screws @200mm C/c including cutting the grill to Propper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specefied and directed.

S&F in repair rolling veniation blind consisting of aluminium head rail, of approved tint and traverse cord complete fixed in position complete all as specefied and directed.

Dismentling of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet etc complete all as specified and directed.

S&F 12 mm thick fiber insulation boards flame retardant type,treated on one face fixed in snapgrid including taking down and refixing E/M fixtures/fittings and reconnecting wiring connection complete all as specified and directed.

S&F 4.8mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window of any size complete all as specified and directed

Dismantling of stone slabs of any description or thickness in floors, aprons,cills etc. laid, bedded and pointed in any mortar complete all specified and directed.

M&L for complete removal of existing treatment on old decorated wall surfaces and applying two coats of plastic emulsion paint over and including 2 mm thick wall care putty complete all as specified and directed.

BLANK

S&F in repair 12mm thick plain toughned glass door with all fittings as mentioned below including necessary cutting, making holes ( including taking down old glass doors) :- (a) Floor hydraulic machine 01 No in each shutter. (b) Stainless Steel handle of size 300 mm, 25 mm dia - 02 Nos (Both side in each shutters) (c) Stainless Steel over panel set/connecting patch with pivot on corners. (d) Stainless Steel 'L' Connector for wall to wall and wall to glass - 04 Nos in each shutters. (e) Stainless Steel Centre lock 01 No in each Shutter.

S&F 0.15 mm thick pvc film (strip type plain and transparent) on glasses pasted with required adhesive complete all as specefied and directed .

Taking down shutters of any description not exc 02 Sqm each complete all as specified and directed

M&L for 40 mm thick flush shutters ,solid core construction with block board core with decorative face veneer both side with lipping/frame to match complete all as specified and directed

M&L for french polishing on surfaces of any descriptions including cleaning and preparaing the surface including a coat of filler on new with two or more coats complete all as specefied and directed

S&F brass tower bolts with cast or sheet barrel 200 mm long and fixed complete all as specified and directed

S&F 300 mm long brass sliding door bolts with sand or die cast brass hasp and staples and fixing bolts complete all as specefied and directed

S&F brass handles 150 mm long cast type polished bright complete all as specefied and directed

S&F mortice latch with two levers vertical type brass body complete all as specified and directed

S&F 100 mm size brass hinges with MS steel hinges pin type B-12 complete all as specified and directed

S&F door closer hydraulic regulated designation no.2 universal type sutable for doors of aluminium body (die cast) complete all as specified and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate complete all as specified and directed.

BLANK

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, in soft or loose soil returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for MS framed work of angle, tee,channel, flats, conforming to Fe-290 (Gde E-165), as in Poles/Pillar/Purlin/Rafter including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

M&L for rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes incl. rivetting, welding etc confirming to Fe 410 W Gde- E-250 complete all as specified and directed

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or inducton butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut nexc 10 cm long and 16mm dia of shank complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors complete all as specified and directed

M&L for factory made machine pressed chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, glossy finish over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chemfered edges cement concrete paver block of M-35 grade with approved colour,design and pattern as in footpath,park,lawns or light traffic parking etc of requred stength,thickness,size,shape made by table vibrating method using PU mould laid in requred colour and pattern over and including 50 mm thick compacted bed of fine sand,commpacting and proper embedding/laying of interlocking paver block in sand bedding layer through vibrating compaction by using plate vibrator,filling the joints with fine sand and cutting of paver block as per requred size and pattern,finishing and sweeping extra sand complete all as specified and directed.

M&L for prepration of new or previously untreated steel surface and over 10 cm width or girth applying two coats synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for preparation of new plastered wall surfaces and applying two coats of acrylic exterior paint over one coat of primer and finished the surface smooth complete all specified and directed.

Demolition of reinforced cement concrete as in slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed

S&F Factory made precast heavy duty drain/ manhole covers with MS frame and reinforcement as per IS 12592 (2002) complete all as specified and directed.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar 1:3 including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm)including making drainage ,opening wherever required including taking out old kerb stone and removing from MOD land complete all as specified and directed.

M&L for preparation of newly concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and directed.

Dismantling of Plain or corrugated steel /PVC sheeting, any gauge, thickness, including Nainital or similar pattern roof covering for complete all specified and directed.

Removal of demolished material with a lead exc 1.5 Km but n exc 5 km (including material loading and unloading) outside the MOD land complete all as specified and directed

M&L for point wiring concealed type with PVC insulated unsheathed copper conductor cable FRLSH 1.5 sqmm multi stranded two single copper conductor in including PVC conduit pipe 20 mm dia medium grade ISI marked complete with all accessories and with 1.5 sqmm PVC insulated copper GI 2 mm thick cable FRLSH contineous earth wire, re-recessed mounting pressed steel flush box suitable for modular switch of adequate size including white cover sheet inner & outer complete all as specified and directed for followings :-

One light/ fan point controlled by one switch.

One 3 pin socket outlet point on independent board

One 3 pin socket outlet point on same board.

One light point controlled by two way 02 No switches.

M&L for point wiring concealed type with PVC insulated unsheathed copper conductor cable FRLSH 4 sqmm multi stranded two single copper conductor in including PVC conduit pipe 20 mm dia medium grade ISI marked complete with all accessories and with 4.0 sqmm PVC insulated copper conductor cable FRLSH contineous earth wire, re-recessed mounting pressed steel GI 2 mm thick flush box suitable for modular switch of adequate size including white cover sheet inner & outer complete all as specified and directed .

S&F modular switch single pole one way 6 Amps 1 module complete all as specified and directed

S&F modular switch single pole two way 6 Amps 01 module 02 way complete all as specified and directed

S&F modular switch single pole one way 16/20 Amps 1 module complete all as specified and directed

M&L modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.

M&L modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose, surface bakelite 65x50mm three terminals complete all as specified and directed

S&F fan step regulator, modular, 120W, 2 Module complete all as specified and directed

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

S&F MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 04 way. 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed

S&F MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, SPN 08 way. 230 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCB, including grouting in the wall, cutting & chasing etc complete all as specified and directed

S&F MCB 6-32Amps,10 KA SP C-curve, complete all as specified and directed

S&F MCB DP 63 Amps C curve, 10 KA complete all as specified and directed

S&F MCCB of 04 pole 100 amp 50Hz 415 volts with rupturing capacity 16KA complete all as specified and directed

S&F sheet metal enclosure SPN type with 2 pin and earth plug and socket (industrial type with an including one MCB SP, C-curve type of capacity 25 Amp, 10 KA complete all as specified and directed

M&L for Wiring for circuit/submain wiring alongwith earth wire of FRLSH PVC insulated copper conductor, single core multi stranded cable in concealed of size 4X10 Sq mm + 2X10 Sq mm earth wire including PVC conduit 32 mm diam medium grade, ISI marked and lugs/thimble with nuts,bollts and washers etc complete all as specified and directed. Note : 6 run of 10 Sqmm cable and one run of PVC conduit including cutting & chasing shall be measured as one unit.

M&L for wiring for circuit/submain wiring alongwith earth wire of FRLSH PVC insulated copper conductor,single core multi stranded cable in concealed of size 2X4 Sq mm + 1X4 Sq mm earth wire including 20 mm dia medium grade ISI marked PVC conduit and lugs/thimble with nuts,bollts and washers etc complete all as specified and directed. Note :- 3 run of 4 Sqmm cable and one run of PVC conduit including cutting & chasing shall be measured as one unit.

S&F LED light 34W LED surface mounted bakalite panel 2' x 2' luminaire suitable for surface/grid ceiling for low ceiling applications with tube, driver and connecting cable including making electric connection to ceiling rose or connector complete all as specified and directed.

S&F Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.trica batten 230 volt, 50 Hz, 22 watt and twin core 1.5 sqmm flexible copper cable for connecting to ceiling rose complete all as specified and directed.

S&F mirror light surface and wall mounted, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver LED 230 volt 50 Hz, 10 watt complete all as specified and directed

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed

S&F wall mounted fan 400 mm sweep 230 V remote control operated all as specified and directed .

S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below and above 15 cm of earth plate. GI plate connected with galvanised iron strip of 25x4mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) complete all as specified, shown in electrical plate No. 3 of SSR Part-I, testing and directed with following:- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm internal dimension constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 including RCC 1 :2:4 type B0 reinforced with 8mm dia mild steel TMT bars @100 mm c/c both ways pit cover 25mm thick with 2 Nos handles of mild steel TMT bras 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm for 30x30 cm PCC pit for holding the pit cover. (e ) Apply two coat of syntheticn enamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces.

M&L for GI strip size 25mm x 4 mm as earth continuty conductor complete all as specified and directed

Cutting existing steel tubing upto 50 mm dia for alterations or additions (Each cut measured) Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector with taking down complete all as specified and directed

S&F 25 mm dia GI pipe medium grade including all fittings fixed on wall, ceiling, floor etc complete all as specified and directed

S&F Gun-metal, globe or gate valves, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanized steel strip or wire armoured, elctric power cables (heavy duty) 1100 V grade with stranded aluminium conductor of size 50 Sqmm 4.0 core complete all as specified and directed

S&F in repair 3 pole MCCB 160 Amp, 50 Hz, 415 with rupturing capacity 35KA in existing LT Panel board for connection of Bldg Supply complete all as specified and directed

Supply & laying dry clean sand for cushioning of undergroud cable laid in trenches/duct complete all as speciifed and directed. Note :- Punned thickness shall be measured.

M&L for sub class B burnt brick flat across the cable for protection of cable laid in trenches complete all as specified and directed.

Supply and laying GI pipe mideum grade in replacment of 50mm dia laid in trenches for protection of UG cable complete all as specified and directed

M&L for cutting of road/hardstanding upto depth 45cm from ground level & 40 cm wide with necessary machine including filling with PCC 1:3:6 upto surface level & making good disturbed surface complete for laying of GI pipe of 50mm dia complete all as specified and directed Note :- Supply and laying of GI pipe 50mm dia shall be measured & paid under relevant items

S&F desert cooler elctric driven (single phase), having nomiral air flow of 5000 Cum per hour (or nearest size). (steel body) complete all as specified and directed

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 25 Amps complete all as specified and directed

M&L for sub main wiring concealed with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 6 Sqmm and one run of 6 Sqmm PVC insulated FRLSH copper conductor cable as earth continutiy conductor drawn in and including 20mm dia PVC conduit conceald medium grade complete all as specified and directed. Note :- 3 run of 6 Sqmm cable and one run of PVC conduit including cutting & chasing shall be measured as one unit.

DR Buildcon

SAWARIYA ENGINEERS AND CONTRACTORS

M/s Manish Contractor

M/S SANJAY AGARWAL

R.K ENGINEERS & CONTRACTORS