Repair of Pump Room Building at WSS Sarore under Jal Jeevan Mission

Amount

Dismantling of Brick work including disposing off dismantled material up to a lead of 50 m.

Dismantling of Mud phuska including disposing off dismantled material up to a lead of 50 m.

Dismantling of Brick tiles including disposing off dismantled material up to a lead of 50 m

Dismantling of doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and staking within 50 mtrs lead : of area of 3sqm or below

Removing mortar from bricks.including disposing off dismantled material up to a lead of 50 mtr

Surface dressing of the ground including removing vegetation and in equalaties not exceeding 15cm deep and disposal of rubbish lead upto 50 mtr and lift upto 1.50 mtr in all kinds of soils.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12mm thick Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 coarse sand)

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finishing neat. With machine moulded Common burnt clay (Non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.

Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece as in manhole cover on top of the dome/spring cover with locking arrangement.

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

White washing with lime to give and even shade on new work (three or more coats).

Carriage of Sand by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 20 km

Carriage of stone aggregate ( Crushed) upto 20 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 10 km

Carriage of Bricks by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 10 km

Carriage of Brick Tiles by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 10 km

SHIV SARAN GUPTA

RAKESH KUMAR GUPTA

Smt. Sonia Jamwal, Govt Contractor