Repair to joinery, flooring, plumbing, sunken floor, certain misc B/R wk, Rpr/replacement of florescent, flood lights, solar light, connected items, over hauling, rprs of solar water heaters, summer appliances, connected wks at Misa Camp under GE (S)

Amount

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each.Complete all as specified and as directed.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water.Complete all as specified and as directed.

Demolition cement concrete n'exc 15 cm thick (below or above ground level). Complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat ), removing serviceable tiles to store and rubbish off the premesises.Complete all as specified and as directed.

Dismantling water tanks and removing exc 500 but n exc 1000 ltrs capacity.Complete all as specified and as directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store.Complete all as specified and as directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store.Complete all as specified and as directed.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering.Complete all as specified and as directed.

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with L type J type or cranked hook bolts as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed wiith L type J type or cranked hook bolts as specified and directed

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.Complete all as specified and as directed.

S/F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters.Complete all as specified and as directed.

S&F mild steel medium weight cold rolled butt hinges 100 mm long and fixed.Complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long.Complete all as specified and as directed.

S&F 150mm long aluminium handle, cast type, anodised.Complete all as specified and as directed.

S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any hickness, size, quality or description) from Metal Frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.Complete all as specified and as directed.

S/F 3 mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty.Complete all as specified and as directed.

S/F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty.Complete all as specified and as directed.

S & F GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls/floor etc.Complete all as specified and as directed.

S&F tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore.Complete all as specified and as directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position.Complete all as specified and as directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position.Complete all as specified and as directed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms).Complete all as specified and as directed.

S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) fixed in repair of bore 25 mm.Complete all as specified and as directed.

M&L 15mm thick screed bed in CM 1:6 for laying of floor finish Complete all as specified and as directed.

M&L 10mm thick backing coat in CM 1:4 on brick or concrete surfaces for fixing of wall tiles as in dado/skirting.Complete all as specified and as directed.

S&F vitrified Ceramic tiles 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

All as per item 29 above but on skirting

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.Complete all as specified and as directed.

S&F for colour Glazed ceramic tiles (250x350)/(450x350) of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed.

M & L for machine cut kota stone on flooring/staircase 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed and with pigment to match the shade of slab including rubbing/grinding and polishing.Complete all as specified and as directed.

All as per item No 33 above but on skirting

Taking down existing damaged IWC/EWC alongwith complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :-(i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive.(iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm.(iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete in Mix 1:5:10 Complete all as specified and as directed.

S&F in repairs Vitreous China wash hand basin white 550 x 400 mm including CP waste coupling and PVC Waste pipe fixed.Complete all as specified and as directed.

S&F Vitreous China EWC wash down water closet (padestal pattern, white ) including PVC Sheet cover fixed in repair.Complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding 1:2.Complete all as specified and as directed.

S & F in repair PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets.Complete all as specified and as directed.

S &F in repair brass CP shower rose swivel type fix to iron pipe all as directed.

S & F in repair 15mm Stop valves cast copper alloy with fancy type chromium plated with long shank and cup (Concealed Type) for iron pipe or for unions and fixed .Complete all as specified and as directed.

S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .Complete all as specified and as directed.

Dismentling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.Complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 110mm bore.(Make Prince/Supreme/Kisan)

S&F PVC (SWR) bends any radius 110mm bore in repairs

S&F PVC (SWR) bends any radius 110mm bore with access door in repairs

S& F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete fixed in repair

S&F in repair pillar cock 15mm dia CP fancy type fixed.Complete all as specified and as directed.

M & L 10mm thick rendering in cm(1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement.Complete all as specified and as directed.

M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 2% by the weight of cement. (WPC Will be measured and paid seperately).Complete all as specified and as directed.

Supply only integral water proofing compound (make: Dr Fixit/Pedilite/fosroc)or equalent

M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement.Complete all as specified and as directed.

M/L two coats of synthetic enameled painting over 1 coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth.Complete all as specified and as directed.

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces.Complete all as specified and as directed.

M&L Applying two coats of distemper over a coat of 3 mm thick a layer of wall care putty on walls including preparation of surface.Complete all as specified and as directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash incl cornicecomplete all as specified and directed. preparation of new surfaces.Complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash all as specified and directed. Complete all as specified and as directed.

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/sub base/path etc complete all as specified and directed.

S&F in repairs 15mm bore fancy type chromium plated bib cock long body with crutch or butterfly handle screwed down for iron pipes.Complete all as specified and as directed.

S&F in repair Tubular towel rail 20 mm dia with brass chromium plated.Complete all as specified and as directed.

S & F in repair health faucet with 1.00 mtr tube and hook complete all as specified and directed. Make-Prayag Cat no BEA -81 or equivalent of Essco/ Jaquar

M & L for in repair Door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed.Complete all as specified and as directed.

S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Make : Jaquar or equivalent)

S & F in repairs 32 mm Waste coupling of brass chromium plated (half or full threaded) .(Jaquar/ Hindware)

S & F in repairs 32mm bore PVC Waste pipe for wash hand basin complete all as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.Complete all as specified and as directed.

S & F in repair tank cover for PVC tank(500/750/1000Ltrs) cover with 6 mm dia MS bar hinging device and 6mm dia MS bar locking arrangement of 'S; type for monkey protection etc complete all as specified and directed

S & F 15 mm CP Brass wall mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and directed

S&F 300mm long brass sliding door bolt with with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F Powder coated anodised aluminium door, window and ventilator shutters, any type sliding or openable with frame & other similar worketc faricated by using the Jindal /Hindal Co standard section including necessary arrangements to receive 4 mm thick glass or wiremeshwith aluminum channelbeading and stainless steel screws including cost of rubber gasket / rubber beading etc complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. Note: Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges , handle, bolts, rubber gasket /rubber beading and locking arrangements

S & F 4 mm thick sheet glass ordinary qualityexceeding 0.5 Sqm each pane all as specified and as directed.

S & F Stainless steel wire cloth 0.63 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified and as directed

S & F Powder coated aluminium grill of design DG-104 pattern made out of 10 mm dia rod fixed withand including stranded aluminium frame of F section of size 23.40 x 15.3 x 1.4 mm thick all as per manufacture instructions complete all asspecified and directed

Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for taking out/laying XLPE cable/CI/GI pipes and getting out in soft/loose soil complete all specified/directed

Removing excavation soil at a distance not exc 50 m and deposited where directed complete all as directed.

Returning,filling in including spreading, leveling, watering and well rumming in layers not exc 25 cm complete all as directed.

M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :- Punned thickness of sand layer shall be measured and paid to contractor.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

S&F in replacement steel water tubing 40 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core and testing complete all as specified and directed. (Make:Havells India Ltd/ Richa/ KEI Industries Ltd/Polycab/ASIAN Cable/Finolex).

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 25 sqmm 4 core and testing complete all as specified and directed. (Make:Havells India Ltd/ Richa/ KEI Industries Ltd/Polycab/ASIAN Cable/Finolex).

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 2.5 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire complete all as specified and directed.

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated standred twin core flat or circular aluminium conductor of size 4.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire complete all as specified and directed.

Supply and fixing LED Street lights not less than 25 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions.Make-Havells,Cat No :-ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fixing LED Street lights not less than 60 W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions.Make-Havells,Cat No :-ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fixing in replacement of LED flood light fitting light not less than 70 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed. Make-Havells,Cat No :-JETA PROFL70WLED757LT G or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fixing in replacement of LED flood light fitting light not less than 120 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed. Make-Havells,Cat No :-JETAIRISFLS 120WLED757SYMLT G or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fixing in replacement of LED flood light fitting light not less than 200 watt with IP66 protection new generation energy saving very high efficiency,enviormental friendly ,long life with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete making all connection all as specified and directed. Make-Havells,Cat No :-JETA VALOURFL200WLED757PINTNBLT G or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fixing LED Solar street light fitting 20 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete.Make-Havells,Cat No :-20 W Solar SLS or equivalent make of Phillips/Bajaj/Surya/HPL

Supply and fix in replacement of loop in loop out junction box with SP 6-32 amp, IP 65 / IP 66 protection halogen free and weather proof of size (205x255x122) mm, fixed to Pole with suitable clamp including nuts and bolts and washers incl provision of connector fixed to pole all as directed. Make:- Hensel model No. DK 2525 G or equivalent in Sintex Industries Ltd

M & L for for bracket of size 40 mm GI pipe for mounting street light at top of existing LT pole including Clamp, cutting, welding, reaming, finishing ,bending in appropriate size at existing location as directed .

S&F in replacement of heating element of 2000 W (Round or Triangular Head as required at site) including rubber washer (ISI marked) etc complete all as directed

S&F in replacement of 450 mm long PVC connection suitable for hot & cold water supply with cromium plated brass screwed nuts at both ends with washers for making water connection of inlet & outlet from geyser to GI pipe 15 mm dia complete all as directed.

S&F in replacement of thermostat suitable for water heater of any size/type complete all as directed.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 1.5 sqmm with copper conductor 1100 Volts grade conforming to IS:694/1990 ISI all as specified and directed.

S&F in replacement of plug top 3 pin 16 amps ISI marked complete all as directed

S & F in replacement of MCB SP 6-32 Amps, 240 V, 50 HZ breaking capacity 10KA, C series all as specified and directed.

M&L for wall fastener of size 100 mm long, 8 mm dia with double washers grouting making good in walls cement mortar (1:4) for fixing water heater, spilit AC outdoor after removing the existing unserviceable nuts /bolts and washers complete all as specified and directed.

S&F in replacement of sealed unit compressor suitable for Refrigarator/Deep Freezer of capacity upto 320 ltrs including sealing of the compressor with welding after assembling complete all as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of sealed unit compressor suitable for water cooler of capacity 40/80 Ltrs including sealing of the compressor with welding after assembling complete all as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of relay suitable for Refrigarator/ Deep Freezer/water Cooler of any capacity complete all as specified and directed.

S&F in replacement of evaporator coil unit complete suitable for Refrigarator/Deep Freezer of any capacity complete all as specified and directed.

S&F in replacement of tap chromium plated 15 mm dia suitable for water cooler all as specified and directed.

S&F in replacement of filter stainer of suitable for Refrigarator/Deep Freezer/water cooler/AC of any capacity all as specified and directed.

S&F in replacement of overload protector for Refrigerator/Deep Freezer/water coolers/AC all as specified and directed.

S&F in replacement of capacitor 6 MFD for AC/water cooler/Deep Freezer/Refrigerator complete all as specified and directed.

Supply and fix in replacement of ice chamber cabinet of Refrigerator of capacity upto 320 ltrs complete all as specified and directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant R-134a as required for Refrigarator/Water Cooler/Deep Freezer and testing the cooling effect satisfactorily on full load. The filling of gas & testing shall be carried out in the presence of Engineer in Charge complete all as directed. Note: Rate of Refrigrant R-134a shall be included in quoated rate.

S&F in replacement of thermatically sealed compressor including sealing of the compressor with welding after assembling for 1.5/2.0 Ton Capacity Spilit type AC/ Window type AC complete all as specified and directed.

S&F in replacement of running capacitor 36-45 MFD for window type/Split type AC 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of starting capacitor 80-120 MFD for window type/split type air conditioner 1.5/2.0 Ton capacity complete all as specified and directed.

S&F in replacement of box type relay suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of copper condencer coil unit complete for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed.

S&F in replacement of capilary tube suitable for 1.5/2.0 Ton Split type/window type AC complete all as specified and directed..

S&F in replacement of fan blade with blower motor of window/split type AC 1.5/2.0 Ton, Refrigerator, deep freezer, water cooler capacity complete all as specified and directed.

S&F in replacement of control circuit (PCB) with remote device suitable for 1.5/2.0 Ton Split type AC complete all as specified and directed.

S&F in replacement of copper tube of size 1/2'' dia for connection of indoor and outdoor unit of split AC/window AC all per directed by the Engineer-in-Charge.

S&F in replacement of copper tube of size 1/4'' dia for connection of indoor and outdoor unit of split AC all per directed by the Engineer-in-Charge.

S&F in replacement of insulation cover of size 5/8" for insulating copper tube of split type AC all per directed by the Engineer-in-Charge.

S&F in replacement of of flair nut for tighting the inlet valve of gas of desire size for connection of indoor and outdoor of split AC all per directed by the Engineer-in-Charge.

S&F in replacement PVC insulated & PVC Sheathed three core cable of size 2.5 sqmm with copper conductor 1100 Volts grade conforming to IS:694/1990 ISI all as specified and directed.

M&L for leak testing with nitrogen dioxide and refilling with refrigerant as required for Split AC/Window AC and testing the cooling effect satisfactorily on full load and the filling of gas & testing shall be carried out in the presence of Engineer in Charge complete all as directed.

M&L for Shifting Split type AC 1.5/2.0 TR capacity including disconnection of out door & indoor unit, Re installed the same to new location after necessary servicing including testing and commisioning complete all as directed.

S&F in replacement of AC support bracket of size 500x500 mm ('L' Shape) 2mm thickness suitable for carrying maximum load 200-250 Kg including necessary fixing arrangements for installation of outdoor unit of split type AC complete all as specified and directed.

S&F in replacement of Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

Supply and fix in replacement of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1.0 KVA all as specified and directed.Make-V-Guard,Cat No VGSD100 or equivalent make of AE/Microtek/Voltmap

Supply and fix in replacement of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA all as specified and directed.Make-V-Guard,Cat No VGb 500 or equivalent make of AE/Microtek/Voltmap

S&F in replacement of float valve assembly complete for water cooler 40/150 ltrs capacity water storage type all as specified and directed.

S&F in replacemet of water purifier stainer for pre filter of single candle complete all as directed.

M&L for servicing refrigerator/water cooler/depp freezer/air conditioner of any capacity after removing electric wire connection & cleaning of Cooling coil, Filter, etc. including testing to cooling complete to entire satisfaction of Engr-in-Charge.

Taking down and Refixing at site ceiling fans 1200/1400 mm sweep including opening of fans and cutting down burnt winding, and rewinding with new super enameled copper winding of same gauge as per existing winding, varnishing, drying, replacement of ball bearing, replacement of condenser etc and re-assembling the same including necessary transportation etc complete including taking down all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S Jiban Krishan Das and Co

D G Corporation