Campus Maintenance Works

Filling of local earth (Excavated Soil) by mechanical transport from the stock yard with in a lead of 3 Km, also including leveling,watering, ramming and consolidating, etc as instructed by the Engineer- in- charge as directed by Engineer-in-charge. Soil will be provided by IIIT Sri City

MASONARY WORK: - Supplying, providing and laying factory made precast concrete solid blocks of 200mm thickness of grade M10 from approved manufacturer with Cement mortar 1:5 (1 cement 5 course sand) Including cost of all materials, Cost of GI wall ties, lead & lift., labour charges, transport charges, curing charges, incidental charges if any complete.cost should be inclusive of floor chipping or any method of Anchoring to floor

INTERNAL FINISHERS: - Supplying, providing and finishing 15mm thickness cement plaster on both sides of the wall with cement mortar mix 1:4 (1 cement 4 Course sand) Including cost of all materials, labour charges, lead & lift, curing charges, transport charges, incidental charges if any complete., as instructed by Engineering In-charge

ALUMINIUM PARTITION: - Full height wall / Partial Height) Design, Supplying, Installation and fixing powder coated aluminium Partition with ACP Sheet and Glass as per approved design and material including cost of all material, labour charges, Lead & lift, transport and incidental charges if any complete as instructed by Engineering Incharge. Note: BH4 floor plan drawing is attached for location reference.

DOOR FRAMES: Providing and fixing in position Anodized / Powder coated Aluminium box frame of size 63x38x3 mm thick from JINDAL profile number 20004 from double groove of 1.790 kg per running meter or 20005 from Single groove of 1.777 kg per running meter shaped, planed and fixed with necessary jointing method approved including pins, nails, screws and bolts etc. Rate shall include for cost of bolts, nuts, screws, nails, pins, approved hold fast and grouting for fixing anchor fasteners / coach screws and including painting of approved colour etc. complete as directed shall be approved by PMC as per design calculation and shop drawing of Frames and accessories.

DOOR SHUTTERS (Single leaf): - Providing and fixing of 32mm thick flush door Shutters (Jackson or approved equivalent make) Single leaf of any size; solid core of block board type bonded with phenol formaldehyde synthetic resin thermo-pressed with 8mm thick teak wood external lipping. The construction procedure of the shutter should be as per IS 2202. The shutter should be shop prepared for taking mortise lock or latches, lock block of wood may be provided for fixing the hard ware. The size of block, shall perfectly correspond to the maximum size of lock, covered in IS 2209. All the four edges of the door shutter shall be square. The shutter shall be free from twist or wrap in its plane and of required size Etc. complete as directed Rate shall be include for providing a glass vision panel of size 450 X 450 mm. The 32mm thick fully flush shutter with commercial ply on both sides finished with 1.5mm thick decorative shade laminate including providing an opening with teak wood lipping for fixing the glass vision panel. The door type and shade should match with the doors fixed in the existing faculty cabins in the same floor . Rate shall be including all the required necessary approved hardware / ironmongeries ( Yale/Dorset/Dorma) And all the necessary fixing accessories as shown in the approved shop drawing or as directed. , including cost of all materials, lead & lift, labour charges, transport charges, incidental charges if any complete. Single leaf door 1000 mm X 2100mm

PAINTING: - Supplying, providing and applying internal painting system over the new masonry walls or Gypsum Board ( 1 coat primer + 2 coat Putty + 2 coat of Emulsion paint), including cost of all materials, lead & lift, labour charges, tools & plants, transport charges, incidental charges if any complete as per the instruction of the Engineer-in-charge

PAINTING: - Supplying, providing and applying internal painting system over the old masonry walls ( 1 coat primer + 2 coat of Emulsion paint ), including cost of all materials, lead & lift, labour charges, tools & plants, transport charges,, Scaffolding / Staging Charges, Cleaning the Walls and Removing Hard Strains Complete as per the Instructions incidental charges if any complete as per the instruction of the Engineer-in-charge

Supplying and laying 50 mm thick Plain cement concrete grade 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size)well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, curing , dressing & finishing the top smooth also includes lifting, placing and surface preparation with zero level as instructed by the Engineering In-charge with. Note: Only RMC OR Mixer Machine mixed concrete will be allowed

Providing and laying Anti-Skid Vitrified floor tilesof size 600x600mm in floor including skutting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 river sand/ M-sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutters only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily