Kerala

To Be Opened

Works

Repair and Maintenance Works

269/26-Renovation of Aalakkad anganvadi in Pookkottur GP

Local Self Government Department

POOKKOTTUR | Malappuram, Kerala

Amount: ₹4.0 LCloses: 10 Sept 20269 Sept 2026Closed

Timeline

Published2 Sept 2026
Closed10 Sept 20269 Sept 2026
Bid Opening11 Sept 2026

Corrigenda

Corrigendum

1 updatesLatest on 10 Sept 2026Submission Ends:9 Sept 202610 Sept 2026

Date changes

Download Ends9 Sept 202610 Sept 2026Submission Ends9 Sept 202610 Sept 2026

Tender Value

₹4.0 L

EMD Value

₹8,448

Closing Date

10 Sept 2026, 3:45 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER POOKKOTTUR GP

Address

AE LSGD PKTR

Work Description

269/26-Renovation of Aalakkad anganvadi in Pookkottur GP

Tender Information

Tender ID

2026_LSGD_867291_20

Reference Number

ET/01/2027/AE/LIDANDEW/PKTR

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Location

POOKKOTTUR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredAFFIDAVIT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredTENDER FEE (.pdf)

RequiredINTEGRITY PACT (.pdf)

RequiredE PAYMENT (.pdf)

RequiredPRELEMINARY AGREEMENT (.pdf)

RequiredSBD WITH NIT (.pdf)

RequiredBIDDERS DOCUMENT ADHAAR LICENSE BANK (.pdf)

RequiredGST DOCUMENT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

EMD Fee Amount

₹8,448

Important Dates

Last Activity

10 Sept 2026

Published

2 Sept 2026

Bid Opening

11 Sept 2026

Download Starts

2 Sept 2026

Download Ends

10 Sept 2026

Submission Starts

2 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Anganvadi Improvement
1.001	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	0.4	kg	171.81	₹68.55
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1	cum	8,483.41	₹8,474.93
1.003	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	1	sqm	354.69	₹354.34
1.004	OD529532/2025-2026:Providing and fixing 150mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron bracket with 25x5mm size flat,screw and washer etc.including making necessary connections with rain water pipe etc.complete.	-	RM	379.55	-
1.005	OD529533/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	1	sqm	608.04	₹607.43
1.006	50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete	-	cum	7,323.11	-
1.007	10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	-	sqm	5,315.86	-
1.008	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	1	kg	163.89	₹163.73
1.009	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	1	sqm	339.63	₹339.29

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

BOQ_1468808.xls

BOQ • 0.32 MB

sbdwithnit.pdf

Tender Documents • 0.62 MB

Corrigendum Documents

TIMEEXTENSION.pdf

PDF • 0.66 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Anganvadi Improvement
1.001	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	0.4	kg	171.81	₹68.55
1.002	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1	cum	8,483.41	₹8,474.93
1.003	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	1	sqm	354.69	₹354.34
1.004	OD529532/2025-2026:Providing and fixing 150mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron bracket with 25x5mm size flat,screw and washer etc.including making necessary connections with rain water pipe etc.complete.	-	RM	379.55	-
1.005	OD529533/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	1	sqm	608.04	₹607.43
1.006	50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete	-	cum	7,323.11	-
1.007	10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece	-	sqm	5,315.86	-
1.008	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	1	kg	163.89	₹163.73
1.009	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	1	sqm	339.63	₹339.29

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Anganvadi Improvement

1.001

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

0.4

171.81

₹68.55

1.002

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

cum

8,483.41

₹8,474.93

1.003

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

sqm

354.69

₹354.34

1.004

OD529532/2025-2026:Providing and fixing 150mm semi circular PVC 4kgf/cm2 rain water gutter pipe with iron bracket with 25x5mm size flat,screw and washer etc.including making necessary connections with rain water pipe etc.complete.

379.55

1.005

OD529533/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

sqm

608.04

₹607.43

1.006

50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

cum

7,323.11

1.007

10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece

sqm

5,315.86

1.008

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

163.89

₹163.73

1.009

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

sqm

339.63

₹339.29