RequiredExperience with Government
RequiredOEM Authorization Certificate Bid to RA enabled No Track Suits - Sports ( 262 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY UTILITY Unisex * COMPONENTS Components Complete Set consisting of Upper and Lower * MATERIAL Fabric ( Composition ) Polyester Blended With Viscose Polyester
RequiredMercerised Combed Cotton
RequiredPolyester Blended with Cotton
RequiredPolyester 1/7 Blended With Viscose Percentage of Blending ( in case of Blended Fabric ) Polyester 50 % and Viscose 50 % Polyester 50 % and Cotton 50 %
RequiredPolyester 50 % and Viscose 50 %
RequiredPolyester 65 % and Cotton 35 %
RequiredPolyester 65 % and Viscose 35 %
RequiredNot Applicable Mass ( gram per square mtrs ) 260 * Fabric Construction Woven Woven
RequiredKnitted Weave ( In case of Woven Fabric ) Plain Plain
RequiredDiamond
RequiredBox Weave
RequiredNot Applicable
RequiredAny other weave as per buyer's requirements Knitting ( In case of knitted Fabric ) Plain ( Single Jersey ) Knitted
RequiredPlain ( Single Jersey ) Knitted
RequiredInterlock Knitted
RequiredNot Applicable Raising at inner side of Main Fabric Yes Yes
RequiredNo Upper Lining Yes Yes
RequiredNo Lower Lining Yes Yes
RequiredNo Lining Material Not Applicable 100% Polyester Mesh
RequiredNot Applicable Mass of Lining (Gram per Square Meter) 65 * Netting mesh No of holes on base & bias within 625 Square millimeter 155 * Technical Requirements of Slide Fastener for Upper Closing Medium special duty Open End as per IS 14181 Latest Medium special duty Open End as per IS 14181 Latest
RequiredLight Duty as per IS 14181 Latest
RequiredNo Technical Requirements of Slide Fastener for Pocket Closing ( For Pockets with Slide Fastner for closing ) Medium special duty Open End as per IS 14181 Latest Medium special duty Open End as per IS 14181 Latest
RequiredLight Duty as per IS 14181 Latest
RequiredNo
RequiredNot applicable Slide Fastners are BIS Marked Not Applicable Yes
RequiredNo
RequiredNot Applicable Width of Tape Elastic at Waist of Trouser 5 cm * Width of Tape Elastic at Bottom of Upper 5 cm * Technical Waist band as per IS Waist band as per IS 2/7 Requirements of Waist Band 9686- 1980 latest 9686- 1980 latest
RequiredNo Waist Draw Cord Polypropylene Cord of 4mm dia * Draw Cord Ends Fused * Breaking Strength of Draw Cord 340 N minimum * Sleeve Ends ( Cuff ) Rib Knitted Fabric * Upper provided with Piping Yes Yes
RequiredNo Lower provided with Piping Yes Yes
RequiredNo Piping Fabric- Composition 100 percent Polyester * Piping Fabric Mass ( gram per square mtrs ) Not Applicable 80
Required90
Required110
Required130
RequiredNot Applicable Embroidery Thread Not Applicable Polyester
RequiredRayon
RequiredMercerised Cotton
RequiredSilk
RequiredNot Applicable SIZE Size Extra Large (XL) Small (S)
RequiredMedium (M)
RequiredLarge (L)
RequiredExtra Large (XL)
RequiredDouble Extra Large (XXL) DIMENSIONS OF UPPER Width Across Chest 25 mm below under arm 57.5 cm ( Extra Large ) * Width Across Bottom Opening (relaxed) 50 cm ( Extra Large ) * Length at front from top of collar to bottom 70 cm ( Extra Large ) * Sleeve length (from center of back to bottom of sleeve 89.5 cm ( Extra Large ) * Sleeve opening relaxed ( Cuff ) Width 12.5 * Front Neck Drop 10 * Back Neck Drop 2.5 * Length of Slide Fastener 68 cm ( Extra Large ) * DIMENSIONS OF LOWER Side Seam Length 109.5 cm ( Extra Large ) * Waist relaxed ( Width Across ) 47 cm ( Extra Large ) * Waist stretched (Width Across ) 57.5 cm ( Extra Large ) * 3/7 Seat/Hip ( 15 cm below waist band) 57.5 cm ( Extra Large ) * Thigh (at Crotch) ( Width Across ) 38 cm ( Extra Large ) * Bottom Opening ( Width Across ) 26 * Front rise including waist band 30 cm ( Extra Large ) * Back rise including waist band 40 cm ( Extra Large ) * Length of Waist Tying Cord 170 * Bottom Fold (Hem) with full turn in(cm) 2.0 * POCKETS Number of Pockets (Upper) 2 Side Pockets 2 Side Pockets
Required2 Side Pockets and one Inside Pocket at Chest
RequiredWithout Pockets Size of Side Pockets- Upper ( Length X Width ) ( cm ) 18 X 20 cm * Size of Inside Pocket at Chest- Upper 11 cm X 15 cm * Side Pocket opening - Upper 15.0 cm * Side Pocket Closure with Slide Fastener -Upper Yes Yes
RequiredNo
RequiredNot Applicable Number of Pockets (Lower) Without Pockets 2 Side Pockets
Required2 Side Pockets and 1 Back Pocket
RequiredWithout Pockets Size of Side Pockets - Lower ( Length X Width ) ( cm ) 18 cm X 20 cm * Side Pocket Opening- Lower 15 * Pocket Closure with Slide Fastener - Lower Side Pockets with Slide Fastener Side Pockets with Slide Fastener
RequiredBack Pockets with Slide Fastener
RequiredAll Pockets with Slide Fastener
RequiredAll Pockets without Slide Fastener Material of Pockets Main Basic Fabric * COLLAR Collar Type Stand and Fall Type
RequiredMade of two layers of self material * 4/7 Collar Reinforcement With Canvas Reinforcement * SLEEVE Sleeve Type Reglan Sleeve * PIPING STITCHING Sewing Thread 125 d tex X 3
RequiredPolyester * Raw edges
Requiredif any shall be bound by overlock stitching Yes * Waist band stitching of Upper Stitched in single rows with chain stitch on the elastic * Sleeve Bottom (Cuff ) Stitching Stitched in single rows with chain stitch on the elastic * Waist band stitching of Lower Stitched in single rows with chain stitch on the elastic * Lining seams Not Applicable * Bartack Stitching ( Reinforcement Stitching ) at stress bearing areas Pocket opening
RequiredCentre of Waist Band Seam and bottom hem and other stress bearing areas * Tunnel at Waist Band for Lower Two holes stitched to allow the draw cord with insertion free movement * Stitches per dm ( min ) 36 * COLOUR/PRINT Colour Multicolour Contrasting Pannels Any other colour as per buyer's requirements * Sublimation Printing (for 100 % polyester only) Sublimation Print as per buyer's requirements Sublimation Print as per buyer's requirements
RequiredWithout
RequiredNot applicable Colourfastness to Light ( IS 2454 ) 5 * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3)) Change in Colour- 4; Staining of Adjacent Fabric- 3-4 * Colourfastness to Rubbing ( IS 766 ) Dry- 4/Wet- 3 * Colourfastness to perspiration ( IS 971 ) 4 * Colour of Mesh Lining Not Applicable White
RequiredSame as colour of the base fabric
RequiredAny 5/7 other colour as per buyer's requirements
RequiredNot Applicable Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Not Applicable * Colourfastness to perspiration ( IS 971 )- Mesh Lining Not Applicable * Colour of Piping Material Any other colour as per buyer's requirements * OTHER REQUIREMENTS Pilling Resistant [after 5 hours Test as per IS 10971 (Part 1)]
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and widthwise direction 1 1
Required2
Required3 LOGO AND MARKING Logo/Totem Marking As per buyer's requirements As per buyer's requirements
RequiredNo Type of Logo Printed Embroidery
RequiredPrinted
RequiredEmbossed
RequiredNot Applicable Number of Logos on Upper 2 1
Required2
Required3
RequiredNot Applicable Number of Logos on Lower 1 1
Required2
Required3
RequiredNot Applicable TEST REPORT Availability of Test Report from designated AHSP NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification Yes Yes
RequiredNo Test reports to be furnished to buyer on demand
Requiredif claimed to be available Not applicable * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply No Yes
RequiredNo
RequiredNot applicable 6/7 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
