Water supply to 7nos of school and Anganwadies Boudh NAC.

Dismantling squatting type water closet and urinal plates etc and mending good the damages to the floors etc.

Supplying all the labour, T & P for fixing P.V.C water storage tank including cutting holes through the tank and fixing G.I pipes and fitings and providing extra socket ,jam nut, fixing valves etc including hoisting upto a height of 5 mtr above ground level and placing the tank to the required position all complete as per specification and direction of EIC 1000 Ltr Capacity

Supplying all materials,Labour T & P & construction of supporting staging for installation of PVC water storage tank of 1000/ 1500 ltr capacity mounted over RCC slab of 1.85 m x 1.85 m x 0.10 m size to be placed over brick wall on roof top corner walls

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan

Supplying all materials, labour, T&P and fitting and Fixing 10.00 ltrs capacity Low level flushing cistern with a pair of PVC brackets complete with fittings such as siphonic arrangment 15 mm nominal size PVC handle, P.V.C ball valve with polythene float etc, all complete as per specification. Make-parryware slim line of white colour.

Supplying all materials, labour, T&P and fixing Porcelain wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge

Fixing pedestal for the Wash Basin complete recessed at the back for the reception of pipes and fittings

Supplying all materials, labour, T&P and fixing C P brass pillar taps capstan head screw down high pressure with long screws,shanks and back nuts of the following nominal bore as per specification 15 mm dia CP brass pillar taps

Supplying all materials, labour, T&P and fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification 15mm dia PVC inlet connection pipe 0.45m long [LEO/WATERTEK Make]

Supplying all materials, labour, T&P and fixing CP/SS/Brass waste of the following nominal diameter for wash basin and sink as per specification 32mm dia CP waste Coupling Half /Full Thread.[CAMRY GOLD Make]

Supplying all materials, labour, T&P and fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification 32mm dia PVC waste pipe. (PRAYAG/WATER TEK make)

Supplying all materials, labour, T&P fitting and fixing brass/C.P. fitting and fixtures of the following specification with supply of all jointing materials, C.P. screws, wooden plugs, washers etc. as per direction of Engineer-in-charge 15mm dia CP long body bib cock (Plaza/Zigma/Plumber/PRJ make)

15mm dia CP angle stop cock (Plaza/Zigma/Plumber/PRJ make)

C P Grating

C P Soap Holder

Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification.

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 25 mm dia UPVC Pipe

Supplying all materials, labour & T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings/PVC pipes and fittings and making good to the damages all complete as per direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge 75 mm dia UPVC SWR pipe

110 mm dia UPVC SWR pipe

110mm dia Vent Cowl

Fixing of CPVC Ball Valve of the following nominal sizes with Handle as per spaecification complete. ( Make Water Tech ) 25 mm dia

Supplying all materials,Labour ,T & P for construction of 1.20 m dia and 1.65 m deep soak way pit with Precast RCC rings 6 nos ,filling dry brick khoa of size 40 mm to a height of 1.00 m from bottom including earthwork in excavation and filling of cavity around the pit and painting to iron work etc as per approved design.

Dismantling and removing old tiled flooring including removing the base coars and stacking the useful materials for reuse and removing the debries within 50 M lead.

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles compelte including cost of ceramic floor tiles of approved shade

Fixing tiles in dados skiring and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including cost of ceramic wall tiles of approved make

Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade in Ground Floor.

Please Enable Macros to View BoQ information