CONSTRUCTION OF HPPWD DIVISION OFFICE BUILDING KOTLA BEHAR DISTT KANGA HP

Amount

Excavation in foundation trenches etcetra by mechanical means (Hydraulic excavator)/manual means in all kinds and classification of soil such as pick work, pick jumper work, pick and jumper work, blasting work, (soft or hard rock), saturated soil, dewatering including wedging out rock where blasting work is prohibited, chiseling and any other mixed variety of soil de-watering and/or removal of slush, stacking the excavated soil not more than 3 mtrs. (Three metres) clear from the edge of excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers when required into plinths, sides of foundations etcetra, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per HPPWD specification,approved Drawing,design to the entire satisfaction and direction of the Engineer-in Charge including carriage of material within all leads and lifts and other incidentals.The rates is inclusive of octroi, royality, malkhana, toll tax,GST and any other taxes as imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in all height and depth in all kinds and classification of soil such as pick work, jumper work, pick and jumper work, blasting work, (soft or hard rock), saturated soil, dewatering including wedging out rock where blasting work is prohibited and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Banking excavated earth in layers not exceeding 20 cm (twenty centimetre) in depth, breaking clods, watering, rolling each layer with ½ (half) tonne roller, or wooden or steel rammers, and rolling every 3rd (third) and top-most layer with power roller of minimum 8 (eight) tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etcetra and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by government

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five coarse sand isto ten graded stone aggregate 40mm ( forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth in all depth as per HPPWD specification, approved Drawings, design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four coarse sand isto eight graded stone aggregate 40mm ( forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth in all depth as per HPPWD specification, approved Drawings, design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm ( twenty millimetre nominal size) and curing complete excluding cost of form work in flooring in all depth as per HPPWD specification, approved Drawings, design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforced cement concrete work cement contents not less than 330 kg (Three hundred thirty kilogramme) per cubic metre or as per approved design mix for all works upto plinth level to give a smooth surface including curing complete pumping of concrete to site of laying but excluding the cost of centering, shuttring for including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforced cement concrte work with cement content not less than 330 kg (Three hundred thirty kilogramme) per cubic metre as per as approved design mix for all works above plinth levelto all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excludingthe cost of centring and shuttering and reinforcement including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without imposing strength and durability for reinforced concrete work complete as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix cement concrete work for grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) reinforcecd cement concrte work cement content not less than 360 kg (Three hundred sixty kilogramme) per cubic metre for work . All works upto plinth level to all floor to give a smooth surface mechanically mixed and vibrated and pumping of concrete to site of laying but excluding the cost of centering, shuttering and reinforcement including admixture in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without imposing strength and durability for reinforced concrete work complete as per approved drawing,design and as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lift and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing Tor steel steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more of Tata Tiscon / Sail for Reinforced concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding wires complete upto all floor level and as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetra and mass concrete including entire carriage of materials work in all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings,balconies and access platform, shelves and the like floor etcetra In all thickness upto all floor level including entire carriage of materials in all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Weather shade,chajjas,corbels etcetra including edges upto all floor level including entire carriage of materials in all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams,beam haunchings, cantilevers, girders, bressumers and lintels upto any height/depth upto all floor level including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars,Piers,Abutment,Posts and struts upto all floor level including entire carriage of materials within all leads lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in window sills , String course ,bods coping bed plates,anchor blocks and the like etcetra and mass concrete including entire carriage of materials work in all leads, lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls width upto all floor level including entire carriage of materials within all leads, lifts and upto any other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Cases with sloping or upto all floor level including entire carriage of materials with in all leads,lifts and other incidentials as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies for all heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcetra upto all level including entire carriage of materials within all leads lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Coursed rubble masonary ( first sort) with hard stone in foundation and plinth of approved quality including racking out joint in cement mortar 1:6 (one cement isto six sand) in all heights/depths or as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Brick work using common burnt clay F.P.S (non modular) bricks in foundation and plinth in Cement Mortar 1:6 (one Cement isto six Sand) and curing complete as per approved drawing , specifications and as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work using common burnt clay F.P.S (non modular) bricks in super-structure above plinth level upto all floor level in Cement Mortar 1:6 (one Cement isto six Sand) and curing complete as per approved drawing , specifications and as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and other taxes imposed by the Government.

Half brick masonry using common burnt clay F.P.S (non modular) bricks in super structure above plinth level upto floor V level in Cement Mortar 1:4 (One Cement isto Four Sand) and curing complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

40 c.m ( Forty centimeter) thick cavity wall with common burnt clay F.P.S (non modular) bricks in wall 40 cm (forty centimetre) thick with 17 cm ( Seventeen centimeter) wide cavity and consisting 11.5 c.m ( Eleven point five centimeter) thick inner and outer wall 11.5 c.m ( Eleven point five centimeter) laid in cement mortor 1:4( One cement isto four sand) and strengthed with hoop iron and bituminious coated cross tiles including makking weep hole and vent pipe complete 2 Nos (two number) 6/8 (six /eight ) width bars in Z-shape crossing each other shall be provided at the interval 90-100 c.m ( Ninety to One hundred centimeter) length horizontally and vertically in cavity wall and curing complete ( The measurements of walls faces only one side will be considered for payment) complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using common burnt clay F.P.S (non modular) bricks in foundation and plinth in Cement Mortar 1:4 (One Cement isto Four Sand) and curing complete as per approved drawing and specifications and as per direction and entire satisfaction of the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick with common burnt clay F.P.S (non modular) bricks in super structure above plinth level upto all floor level in Cement Mortar 1:3 (One Cement isto three Sand) and curing complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm ( Ninteen millimeter) thick polished Grey / Black Granite having semi round nosing as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms,vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base cement mortar 1:4 (One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etectra complete at all level complete including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing 35 mm (thirty five millimetre) thick ISI marked factory made flush door shutters both side commercial conforming to IS : 2202 (Part I) non-decorative type bonded ternate resistant & boiling water (water proof) core of block board construction with frame of 1st (first) class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royalty, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying panelling and glazing in panelled and glazed shutter for doors frame of aluminium section, the door shutter, panel below lock rail of 12mm (twenty millimetre) thick both side prelaminated water proof ply board of Action Tesa/Centuary/Kitply/Green ply as per ISI and approved shade of office and shutter above lock rail of 6.00mm (six millimetre) thick glass panes of MoDIGuard/Saint gobain. with necessary screws as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) dia stainless steel curtain rod having wall thickness of 1.25mm ( One Point Twenty Five Millimeter) with two chromium plated brass brackets fixed with C.P Brass screws and P.V.C sleeves etcetra wherever necessary complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing 25mm (twenty five millimetre) thick water proof ply board ISI marked of Century / Alpro ply in SDB shutter with 6 mm (six millimetre) thick hard wood edging all around and 0.63 mm (zero decimal six three millimetre) thick sheet lining in side fixed with piano hings with screw complete and as per the direction of Engineer-in-Charge with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 30mm (thirty millimetre) thick factory made PVC panelled door shutter non decorative finish (matt finish) ( code No. 2.120) of Rajshri consisting of frame made out of M.S. tubes of 19 (nineteen) gauge thickness and size of 19mm x19mm (ninteen into ninteen millimetre) for styles and 15mmx15mm (fifteen into fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (five millimetre) thick heat moulded PVC "C" channel of size 30mm (thirty millimetre) thickness, 70mm (seventy millimetre) width cut of which 50mm (fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tapper in 45 degree angle on either side forming style and 5mm (five millimetre) thick, 95mm (ninty five millimetre) wide, PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges with necessary screws etcetra complete and as per the direction of Engineer-in-Charge with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etcetra aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including clests angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete .For doors windows and ventilatiors and glazed partions frames and as per the direction of Engineer-in-Charge with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Coloured anodised aluminium shutters for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etcetra aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including clests angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) and as per the direction of Engineer-in-Charge with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves back side of cup board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm ( one millimetre) thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete (counter face of cupboard shall be measured for payment) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 5 mm (five millimetre) thickness (weight not less than 12.50 kg/sqm (twelve point fifty killogram per suare metre) of Modi Guard / Saint Gobain in aluminium door, window,ventilator shutters and partition etcetra with PVC/neoprens gasket etcetra complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with frosted glass pans of 4.00 mm (four millimetres) thickness frosted glass weight not less than 10 kg (ten kilograme per suare metre of Modi guard / Sant gabain in aluminium) door, window , ventilator shutter and partition etcetra with EPDM rubber /Neoprene gasket etcetra complete as per architectural drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete ( Only weight of grill to be measured for payment ) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing fly proof stainless steel ( Grade 304) wire guage of 0.5mm ( Zero point five millimeter) dia wire and 1.4mm (one point four millimetre) aperture on both side in windows, clerestory windows and doors with S.S Flat 15x3mm ( Fifteen into Three millimeter) and bolts complete and as per the direction of Engineer-in-Charge with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 With stainless steel cover plate minimum 1.25 mm ( One Point Twenty five millimeter) thickness having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg ( One hundred Twenty five kilogramme) for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetra complete as per the direction of Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government(.i) 300x16mm ( Three Hundred into Sixteen Millimeter)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government(ii) 250x16mm ( Two Hundred Fifty into Sixteen Millimeter)

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(i) 300x10mm ( Three Hundred into Ten Millimeter)

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(i) 250x10mm ( Two Hundred fifty into Ten Millimeter)

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(ii) 200x10mm ( Two Hundred into Ten Millimeter)

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(i) 125mm ( One Hundred Twenty Five Millimeter)

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.(ii) 100mm ( One Hundred Millimeter)

Providing and fixing 150 mm (one hundred fifty millimetre) ISI marked oxidised M.S. single acting spring hinges with necessary screws etcetra complete with necessary screws etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimetre) oxidised M.S. double acting spring hinges with necessary screws etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing magnetic catcher of approved brand ISI marked with necessary screws etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Structural steel work of TATA TISCON SAIL/JINDAL/RELIANCE riveted, bolted/welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer all complete as per approved drawing, design, specification and as directed by Engineer in charge including carraige of materials within all leads and lifts. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Steel work TATA TISCON SAIL/JINDAL/RELIANCE welded in built up sectionsframed work, composed of grating Framed guard bars, ladders, railling, brackets and similar work in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of GST, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and fixing Stainless stee 85 cm (eighty five centimetre) height Knock Down Railing of KICH ISI 316 of 38 mm ( Thirty Eight Millimeter) dia handrail fixed on 10x50 mm ( Ten into Fifty Millimeter) S.S. Flat baluster ( Design Code DT53-2-163) placed at 1200 mm ( Twelve Hundred Millimeter) centre to centre Along with 3 Nos @10mm (three number at the rate ten millimetre) Mid rails connected at the side of baluster with fixtures the baluster would be fixed on to floor with casted base plate of minimum 6mm ( Six Millimeter) thickness base plate shall be concealed with suitable S.S 316 Grade cover cape.The railing height to be taken @ 85 mm ( Eighty Five Millimeter) from floor level complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 50mm ( Fifty Millimeter) dia stainless steel hollow pipe handrail slip resistant with round ends at two levels at 75 Cm & 90cm height (seventy five centimetre and ninety centimetre) It should entend 30 c.m ( Thirty Centimeter) beyond the top and bottom of the ramp as per detail and embadded welded to 25 cm ( Twenty five centimeter) dia stainless steel hollow pipe baluster in cement concrete 600mm ( Six hundred millimeter) C/c as per detail & PWD specifications complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying 600mm x 600 mm ( Six hundred into Six hundred millimeter) Matt finish vitrified floor tiles of RESTILE/JOHNSON/ NITCO/KAJARIA , ELERNITY,AGL , SOMANY as per approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approveed make, in all colours and shades in flooring, laid on 20mm ( Twenty millimeter) thick cement mortar 1:4 ( One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 18 mm (eighteen millimetre) thick Cheema Pink Granite in combination with Lakhared Granite / Black Granite Border as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut in flooring of required size, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base cement mortar 1:4 ( One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete at all level including carriage of material with in all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing 18 mm (eighteen millimetre) thick Partically Flamed Cheema Pink Granite stone single slab with double round nosing in treads of step gang saw cut, mirror polished, premoulded and prepolished, machine cut of required size, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base cement mortar 1:4 ( One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete at all level including carriage of material with in all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing four layered HDF flooring of Action Tesa/Unitex/LG/Vista/ wonder floor as per ISI and approved shade of office composed of weather resistant surface layer consistanting of aluminum oxide coated layer and printed decorative layer as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Laying 600mm x 600 mm ( Six hundred into Six hundred millimeter) double charge/ultra charged Matt finished vitrified floor tiles of RAK/NIRCO/KAJARIA/AGL/SIMPOLO/ORIENT & BELL in flooring as per approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approveed make, in all colours and shades in, laid on 20mm ( Twenty millimeter) thick cement mortar 1:4 ( One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying mirror polished 25 mm ( Twenty five millimeter) thick Kota stone minimum Size 55X55cm ( Fifty five into Fifty five centimeters) / 55 X 27.5 cm (Fifty five into Twenty seven point five centimeters) of uniform colour with 7.5 cm ( Seven point five centimeter) wide Jaislmer Yellow marble band of same shade that of flooring/skirting of approved shade as per detail slab flooring over 20 mm ( Twenty millimeter average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( One cement isto four coarse sand) complete as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes texes imposed by the Government.

Providing and laying 300x300mm (three hundred into three hundred millimeters) Antiskid Ceramic tiles of premimum quality of NITCO/KAJARIA /JOHNSON /AGL/SOMANY/ORIENT and BELL/SWASTIK in flooring laid on of 20mm (Twenty millimeters) thick cement mortar 1:3 ( One cement isto three coarse sand ) jointed with cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra up to all floor level in all heights including carriage of material as per approved specifications , drawings and design and entire carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying 300 x300x25 mm (three hundred into three hundred into twenty five millimeters) labrador designed (Rain bow serie)s tile of NTC/UNISTONE/ATLANTIC in flooring as per approved shade (thickness to be specified by the manufacturer), of 1st (first) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:3 ( One cement isto three coarse sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material within all leads, lifts and other incidentals The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying 60mm (Sixty millimetres)thick factory made cement concrete interlocking paver block of NTC/UNISTONE/ATLANTIC as per approved design and shade heavy duty precasts cement concrete interlocking paver blocks vibro compacted upto M-50 ( M-Fifty) grade including border or kurb block grey or coloured ever sub base of concrete with 25mm (Twenty five millimetres)thick average thickness of cement mortar 1:4(One cement isto four coarse sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing rubbing polishing completeas per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing plinth protection with 40 mm (Forty millimetre) thick heavy duty precast cement concrete interlocking paver block of NTC/UNISTONE/ATLATICA with 23 cm (twenty three centimetre) diametre half round reinforced concrete pipe for drainage purpose laid over 10mm (Ten Millimetre) thick cement concrete 1:4:8 (one cement isto Four sand isto Eight graded crushed stone aggregate 40 mm (Forty millimetre) nominal size bedding/haunching for pipe complete as per approved drawing/design and specification and as per the direction of Engineer-in-charge including carraige of materials with in all leads, lifts and other incidentials.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying matt finished vitrified tile of RESTILE/ NITCO/RAK/KAJARIA ETEANITY/AGL/ SOMANY / SIMPOLO of approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approveed make, in all colours and shades in skirting, riser of steps, laid on 20mm ( Twenty millimeter) thick cement mortar 1:3 ( One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and Laying 300mm x 300 mm ( Three hundred into Three hundred millimeter) double charge/ultra charged matt finish vitrified floor tiles of RAK/NITCO/KAJARIA/AGL/SIMPOLO/ORIENT & BELL as per approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% (zero point zero eight percent) and conforming to IS: 15622 of approveed make, in all colours and shades in skirting, riser of steps laid on 20mm ( Twenty millimeter) thick cement mortar 1:3 ( One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra, complete including carriage of material with in all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying mirror polished 20 mm ( Twenty millimeter) thick Kota stone in risers of steps,skirting, dado and pillar laid on 12mm ( Twelve millimeter average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 3 ( One cement isto three coarse sand) complete as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes texes imposed by the Government.

Providing and laying 300x600mm (three hundred into three hundred millimeters) Ceramic Glazed tiles of Kajaria (Elernity) / Nitco / Johnson / Rak / Simpolo / AGL (thickness to be specified by the manufacturer) with granite semi round nosing at top in dado / clading of 1st quality conforming to IS : 15622, of approved make and as per approved shade from office laid on 12 mm ( Twelve millimeter) thick cement mortar 1:3 (One Cement isto three Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the ratethree point three killogram per square metre) including grouting the joints with white cement and matching pigments etcetra complete as per the entire satisfaction and direction of Engineer in charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing veneered decorative panelling of teak wood 8mm (eight millimetre) thick over 50x31mm (fifty into thirty one millimetre) soft wood grid frame work and 600mm (six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25x12mm (twenty five into twelve millimetre) having moulding on both sides and cornices /edging lipping 55mm (fifty five millimetre) on top of panel to be finished 55x30mm (fifty five into thirty millimetre) wooden beading as per drawing/design complete and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying 300x450mm (three hundred into four hundred fifty millimeters) Ceramic Glazed tiles of Kajaria /Swastik /Orient & Bell / Somany / AGL (thickness to be specified by the manufacturer) over 20 mm (twenty millimetre) thick bed of cement Mortar 1:4 (one cement isto four coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate three point three killogram per square metre) including pointing in white cement mixed with pigment of matching shade complete and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and carriage of material as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail/ Reliance/ Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridges factory made having proper Gola shape or hips of TATA Durashine/ Sail/ Reliance/ Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted sheet Flashing upto 60cm (Sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail / Reliance/ Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimetre) wide, 25 cm (twenty five centimetre) deep overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty into three millimetre) size, bolts, nuts and washers etcetra, including making necessary connections with rain water pipes complete. 0.80 mm (zero point eighty millimetre) thick with zinc coating not less than 275 (two hundred seventy five) gm/m² (gram per square metre) complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providig and Fixing pre-painted sheet valleys 90 c.m ( Ninety Centimeter) over all with 0.60mm ( Zero decimal six zero millimeter) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindal in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL / Reliance / Jindal for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Fixing 150mm dia ( One Hundred Fifty Millimeter) high pressure P.V.C (D-plast) Rain water Pipe of Supreme/ Finolex/ Vecturs/ Relpipe ( Reliance) working pressure not less than 6 kg / cm2 (six killogram per square centimetre) ISI marked including fixing with approved adhesive etcetra complete including carriage of material as per approved drawing , design and specification and as per the direction of Engineer-in-Charge with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.150 mm ( One Hundred Fifty Millimeter) coupler

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.150 mm ( One Hundred Fifty Millimeter) bend

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.150 mm ( One Hundred Fifty Millimeter) Shoe (plain)

Providing and fixing 150 mm (one hundred fifty millimetre) -PVC pipe clips of approved design to PVC rain water pipes by means of 50x50x50 mm (fitty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetra complete approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm (fifteen centimetre) diameter and weighing not less than 440 (four hundred forty) grams approved drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Fixing 595x595x6mm ( Five Hundred ninety five into Five Hundred ninety five into Six Millimeter) designer board of everest (E-board) ceiling with pre-painted framing @ 600mm ( Six Hundred millimeter) center to centre in complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 20 mm( Twenty Millimeter) Thick Pattern in cement Plaster With cement Mortar 1:4 (One cement isto four coarse sand) as per directions and entire satisfaction of engineer in charge including carriage of material with in all leads , lift and other incidentals . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and applying white cement based putty of Birla / JK average thickness 1 mm ( One Millimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads , lift and other incidentals . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Distempering with dry distemper of approved brand and manufacture (two or more coats) on new work complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of ( ASAIN/NEROLAC/BERGER/DULUX) Paints of approved shade having VOC less then 50gm/litre (fifty gram per litre) and UV reistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (at the rate zero point ninety litre per ten square metre) with in all leads, lifts and other incidential. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with Acrylic emulsion of Asian /Nerolac paints (above Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting ( two coatc) with Acrylic washable emulsion of Asian paints /Nerolac paints (above Dado/skirting) finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

French spirit polishing Two or more coats on new wood works including a coat of wood filler surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S channels Frame75x40x4mm (Seventy five into forty millimeter into Four millimeter) with MS flat 75x4mm(Seventy five into four millimeters) in combination welded together and standard Z-section style of standard size with mesh bars of T-section 25x25x3mm (Twenty five into twenty five into three millimeters) and angle iron 25x20X3mm (Twenty five into twenty into three millimeters) and joints metered and welded and screws with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of Glass panes with glazing clips and special metal mesh putty of approved make complete including applying a priming coat of red lead paint complete up to any floor level and as per the direction of Engineer-in-Charge with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Brick bat aggregate filling under soak pit as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing C.I. cover without frame for manholes 455x610 mm (four hundred fifty five into six hundred ten only) rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (twenty three killogram) as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on 110mm ( One Hundred Ten millimeter) wall faces unplasticised PVC (D-Plast) pipe of Supreme/ Finolex/ Vecturs/ Relpipe ( Reliance) conforming to IS 13592 Type-A including filling the joints with approved adhesive complete as per entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm dia ( one hundred ten millimeter ) P.V.C.. ISI marked of Finolex , Relpipe (Reliance ) , Vectus cowl ISI marked Confirming toIS No-14735-99 including fixing with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Back filling behind abutment Retaining wall/Breast wall, Wing walls and the like with approved granular materials complete as per drawings and MORD technical specification clause 1604.7 and section 300 as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.

Providing and laying 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1(V): 20H (One vertical isto twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614,709,1204.3.7 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 53x41 cm ( Fifty three into forty one centimeter) with integral type foot rests with 100 mm ( One hundred millimeter) P.V.C P or S trap, 10 litre ( Ten Litre) low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)Star S No 20087 (S - 10 ) Size 57 X 35 X 39 cm ( Fifty Seven into Thirty Five into Thirty Nine Centimeter) with seat and lid, 10( Ten) litre low level white PVC flushing cistern (sleek Plus) Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (Ten) litre low level white vitreous china flushing cistern Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal Large flat back range of three no 60002 of size 39 x 37.5 x 59 cm ( Thirty Nine into Thirty Seven point Fifty Nine Centimeter) with white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing White Vitreous China Flat back wash basin Delta no 10010 size 550x 400 mm ( five hundred fifty into four hundred) ( with pedestal ) of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen millimetres) C.P. brass pillar tap with C.I. brackets, 32 mm ( Thrity two millimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Garnet no 10080 size 580x 430 mm ( Five hundred Eighty into Four hundred Thirty Millimeter) ( Under counter Basin ) of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen Millimeter) C.P. brass pillar tap with C.I. brackets, 15 mm ( Fifteen Millimeter) C.P. brass pillar taps, 32 mm (Thirty Two Millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm Five Hundred fifty into Four hundred millimeter) of Cera / Hindware / Jaquar with single 15 mm ( Fifteen Millimeter) C.P. brass pillar tap with C.I. brackets, 15 mm ( Fifteen Millimeter) C.P. brass pillar taps, 32 mm (Thirty Two Millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details for wash basin completely recessed at the back for the reception of pipes and fittings as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm (five hundred into one thousand forty millimetre) bowl depth 250 mm ( Two Hundred Fifty Millimeter) with C.I. brackets and stainless steel plug 40 mm ( Forty Millimeter) including painting of fittings and brackets, cutting and making good the walls wherever required as approved by Engineer - in - charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (one) metre long of Continental series of Jaquar / classik plus series of Hindware /floral series of Cera with S.S. triangular plate to Eureopean type W.C. of quality and make as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x450 mm ( Six Hundred into Four hundred Fifty Millimeter) beveled edge mirror of Continental series of Jaquar / classik plus series of Hindware /floral series of Cera of superior glass (of approved quality) complete with 6 mm ( Six Millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing CP liquid soap container 109 mm (one hundred nine millimetre) wide, 125 mm (one hundred twenty five millimetre) high and 112 mm (one hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (one hundred five grams) as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millmetre) nominal dia C.P. grating of approved quality and colour Circular type as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. Brass towel rail of Continental series of Jaquar / classik plus series of Hindware /floral series of Cera complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm (four hundred fifty millimetre) long towel rail with total length of 495 mm (four hundred ninety five millimetre) , 78 mm (seventy eight millimetre) wide and effective height of 88 mm (eighty millimetre), weighing not less than 170 gms (one hundred seventy grams) as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( Six Hundred into One Hundred Twenty into Five Millimeter) glass shelf Continental series of Jaquar / Classike plus series of Hindware /Floral series of Cera with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( Forty Millimeter) long screws, rawl plugs complete as per the direction of Engineer-in-Charge with including carriage of material in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / contess plus series of Hindware /floral series of Cera and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetre) dia P.V.C.flexible waste pipe of Finolex , Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( Fifteen Millimeter ) Nominal bore C.P. brass bib cock tap of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera approved quality conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90 mm ( One Hundred Ten into Ninety Millimeter) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus, Supreme ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetra complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera for basin mixer and geyser points of approved quality conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass stop cock Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera of standard design and of approved make conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 25 mm (twenty five millimetre)nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera for basin mixer and geyser points of approved quality conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore PVC connection with brass union 45cm (forty five centimetre) length,of Finolex , Relpipe (Reliance ) , Vectus complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing chroium plated brass soap dish of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera with C.P. brass bracket fixed to wooden cleat with CP Brass screw complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing PVC water storage tank (Sintex make 4 layers)of ISI-12701 of Finolex , Relpipe (Reliance ) , Vectus marked GI inlet or and outlet connections 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC with locking arrangement including hoisting up to all heights above ground level as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 500 (five hundred) litres net capacity tank

Providing and fixing PVC water storage tank (Sintex make 4 layers)of ISI-12701 of Finolex , Relpipe (Reliance ) , Vectus marked GI inlet or and outlet connections 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC with locking arrangement including hoisting up to all heights above ground level as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. ii) 1000 (one thousand) litres net capacity tank

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15451 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (one) metre spacing. This includes testing of joints complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.i) 1216 (16 mm (Sixteen millimetre) OD) pipe

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15451 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (one) metre spacing. This includes testing of joints complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Goverment (11) 1620(20Mm ( Twenty milimeter ) OD Pipe

Providing and fixing 40 mm (forty millimetre) dia nominal bore G.I. Pipes complete with G.I. fittings and clamps including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Making connection 25 to 40 mm (twenty five to forty millimetre) nominal bore of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etcetra complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex , Relpipe (Reliance ) , Vectus including fixing with approved adhesive etcetra Complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 150 mm (one hundred fifty millimetre) dia.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex , Relpipe (Reliance ) , Vectus including fixing with approved adhesive etcetra Complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 110 mm (one hundred ten millimetre) dia.

Excavating trenches of required width for pipes, cables, etcetra including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetres) in depth, including consolidating each deposited layer by ramming, watering, etcetra and disposing of surplus excavated within all leads, lifts and other incidential and as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 {One cement isto Five coarse sand isto Ten graded stone aggregate 40 mm ( Forty Millimeter) nominal size}PVC Pipes bedding for 150 mm dia ( One Hundred Fifty Millimeter) including haunching as per standard design and specification the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 {One cement isto Five coarse sand isto Ten graded stone aggregate 40 mm ( Forty Millimeter) nominal size}PVC Pipes bedding for 110 mm dia ( One Hundred ten Millimeter) including haunching as per standard design and specification the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing PVC single equal branch with oval access door, ISI marked ISI marked of Finolex , Relpipe (Reliance ) , Vectus including fixing insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra completeas per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 150 mm (one hundred fifty millimetre) dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked ISI marked of Finolex , Relpipe (Reliance ) , Vectus including fixing insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra completeas per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. ii) 110 mm (one hundred ten millimetre) dia.

Providing and fixing PVC door bend of D-plast of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 150 mm (one hundred fifty millimetre) dia.

Providing and fixing PVC door bend of D-plast of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 110 mm (one hundred ten millimetre) dia.

Providing and fixing PVC Plain Bend of D-plast of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design or equivalent cutting including filling the joints with approved adhesive Complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. i) 150 mm (one hundred fifty millimetre) dia.

Providing and fixing PVC Plain Bend of D-plast of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design or equivalent cutting including filling the joints with approved adhesive Complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government. ii) 110 mm (one hundred ten millimetre) dia

Providing and fixing 150mm (one hundred fifty millimetre) dia PVC clamps ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design with steel screws and rawal plugs etcetra complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix {One cement isto One point five coarse sand (zone- III) isto Three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size, foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm ( Forty Millimeter) nominal size), inside plastering 12 mm ( Twelve Millimeter) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm ( Twenty Millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( Ninety into Eighty Centimeter) and 45 cm ( Forty Five Centimeter) deep including C.I. cover with frame (light duty) 455x610 mm ( Four Hundred Fifty Five into Six Hundred Ten Millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg ( Thirty Eight Kilogramme) {weight of cover 23 kg ( twenty Three Kilogramme and weight of frame 15 kg ( Fifteen Kilogramme} With Sewer bricks conforming to IS : 4885 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One point five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm ( Forty Millimeter) nominal size), inside plastering 12 mm ( Twelve Millimeter) thick with cement mortar 1:3 (One cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 { One cement isto two coarse sand isto four graded stone aggregate 20 mm ( Twenty Millimeter) nominal size} finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm ( one hundred twenty into Ninety Centimeter) and 90 cm ( Ninety Centimeter) deep including C.I. cover with frame (medium duty) 500 mm ( Five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg { One hundred sixteen kilogramme (weight of cover 58 kg ( Fifty Eight Kilogramme ) and weight of frame 58 kg ( Fifty Eight Kilogramme )}With Sewer bricks conforming to IS : 4885 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing CP brass 40mm (forty millimetre) dia steel pipe grab bars at 70cm (seventy centimetre) height with MS plate as the position on seat lid wash basin in toilet for disabled person Complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Govt.

Providing and fixing vitreous china division plate for urinal of Hindware /Cera/ Jaquar /star white of size 600x300mm (Six hundred millimeter into three hundred millimeter) with integral longtitudinal flush pipe as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Fixing 1.00 HP ( One horse power) water lifting pump ISI marked of Kirloskar/Cromption including accessories and making necessary connection as required at site for its functioning complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Rahul Verma Govt. Contractor

Ashwani Kumar

Ravi Kumar

Ujjawal Singh