Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.7 LAccepted-AOC C O BHAGYODAY STORES BAZAR CHOWK NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹44.8 L+₹87,770 (2.00%)Rejected-AOC | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹44.9 L+₹97,775 (2.23%)Rejected-AOC | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹45.1 L+₹1.2 L (2.75%)Rejected-AOC 1ST COMPLEX RADHANPUR ROAD NEAR BYPASS CIRCLE OPP 1SQUARE MARKET MAHESANA GUJARAT 384002 | MAHESANA | GUJARAT | 384002 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹45.2 L+₹1.2 L (2.82%)Rejected-AOC HQ CWE AHMEDABAD | GANDHINAGAR | GUJARAT | 382006 | L5 | Rejected-AOC REJECTED |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
7 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) CG Porbandar
Military Engineer Services, GE I CG Porbandar, DHQ No. 1, Opp. Birla Cement Factory, Porbandar-360575
PETTY REPAIR, DAY TO DAY MAINTENANCE PERIODICAL SERVICES, WELCOME MAINTENANCE AND MISC B/R WORK IN CERTAIN BUILDING AT ICGS VADINAR UNDER GE I CG PORBANDAR
2022_MES_530196_1
8757
Open Tender
Civil Works
Item Rate
270 days
VADINAR
PLEASE REFER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE I CG PORBANDAR
₹87,000
Yes
23 Aug 2022
11 Jun 2022
8 Jul 2022
11 Jun 2022
7 Jul 2022
25 Jun 2022
60 days
Amount
SCHEDULE 'A'
Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engineer-in-Charge.
M&L rendering 15mm thick on stone or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge..
-do- but 5mm thick cemet plaster on ceiling in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.
Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plastered surfaces of wall applying two coat of exterior weather proof paint over a coat of chalk white primer of approved shade complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new plastered surfaces of wall applying two coat of oil bound distemper a coat of chalk white primer of approved shade complete all as specified and as directed by Engineer-in-Charge.
M&L Preparation of old decorated plastered surfaces of walls including cornices, pilasters etc. and applying one coat of acrylic weather proof paints complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment and preparation of old decorated wall surfaces including cornices, pilasters etc. and applying two coat of acrylic weather proof paints over one coat of primer complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing old surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment and preparation of old decorated plastered surfaces of walls and applying two coat OBD over a coat of chalk white primer of approved shade complete all as specified and as directed by Engineer-in-Charge.
M&L Preparation of old decorated plastered surfaces of wall including cornices, pilasters etc. and applying two coat of whiter wash complete all as specified and as directed by Engineer-in-Charge.
M&L Preparation of old decorated steel surfaces including cornices, pilasters etc. and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed by E-in-Charge
Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed by Engineer-in-Charge
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane
S/F 20mm dia aluminium curtain rod with brackets etc all as specified and directed by the Engr-in-Charge fixed in repair
S&F 150 mm aluminium handles, cast type anodised fixed in repairs
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section
S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy but fixed in repairs
S& Fixed in repair rubber beading 50 mm wide and 5 mm thick
S/F magic eye of good quality as per make approved by Engr-in-Charge fixed in repair
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm fix in repair
Demolition of re-inforced cement concrete of any description and in any position not other wise specifically provided for like manhole covers, kichen shleves etc upto 12th floor
M&L for precast RCC cover slabfor drain and manhole cover at type B1 1:2:4 & set in 1:6 including all necessary formwork and finishing exposed concrete surface without using extra cement
M&L mild steel TMT bars 10 mm dia and over , cut to length, bent shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified
Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises all as specified and directed by Engr-in-Charge
M & L coloured chequered cement concrete designer tiles 30cmx30cmx22-25mm thick set jointed and pointed in neat cement in equal portition and pigments incl 20 mm thick screed in CM 1:6 with grey cement and pigments.
M & L 100 mm thick Cement concretein foundations,filling and mass concrete 1:4:8, D2 (using 40mm graded granite stone aggregate) in sub base complete all as specified
M&L for 60 mm thick coloured rubber moulded factory made machine pressed cement concrete interlocking paver ofM30 grade conforming to IS 15658-2006 of any colour and design as approved made by block making machine with strong vibratory compaction of approved shape, size, colour and pattern, laid over and including 50 mm thick compacted bed of coarse sand including watering, jointed and pointed in grey cement and pigment, complete all as specified and directed by Engr-in-Charge
S&F granite 18 to 20 mm thick (of any type) tiles, machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture or pigment to match the shade of granite stone including grinding and polishing , moulding edges as directed and making hole for gas pipe if required complete incl 15mm thick rendering in CM 1:3 as backing
M/L for Non - skid Ceramic tiles 7to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(size of tile,as directed by Engr-in-charge) including 20mm screed bed in cm 1:6 complete all as specified and directed
M/L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cm 1:4 on vertical surface complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity including taking down old one.
S& fixed in repair tubular towel rail, 20 mm dia , D type, 60 cm long between flanges of brass chromium plated
S & Fixed in repair soap dish of chromium plated fixed to plugs with chromium plated screws
S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S&Fixed in repair health faucet with all accessories all as specified and directed by Engr in Charge
S&Fixed in repair PVC (SWR) pipes single socketed in any length with rubber ring joints and accessories laid in floors/wall of 110 mm bore
S&Fixed in repair PVC (SWR) bends 110 mm upto 12th floor
Plate racks made out of 0.8 mm thick .Stainless steel, of size 750x600x 250 mm all as specified and directed as fixed in repair upto 12th floor
S&F in repair PVC waste pipe flexible type for couplings 32/38 mm dia 610 mm long. upto 12th floor
S&F in repair 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipes all as directed by Engineer-in-Charge
S& Fixed in repair handles for 10 Ltr capacity PVC flushing cistern complete all as specified
S & Fixed in repair 15 mm float valve for 10 Ltr capacity PVC Flushing cistern
S& Fixed in repair for washers for 10 Ltr capacity PVC flushing cistern
S/Fixed in repair vitreous china Pedestal type water closet with white seat cover upto
Vitreous China ware wash hand basin white, flat back, size 550x400 mm size with cutting for and pinning ends of brackets or erecting stand including CP waste coupling, 32 mm dia PVC waste pipe fixed in repair
S&Fixed in repair vitreous china Urinal Half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe all as specified and directed by Engineer-in-Charge
S/F of low level flushing cystern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and and handle , body moulded from virgin quality high impact poly propoliyone incl brackets and 32 mm dia PVC flush pipe for low level flush cistern fixed in repair
S/F in repairs for 15mm dia CP tap of brass type cast copper alloy with crutch or butterfly handle fixed pipe in repairs
S/F in repairs brass CP shower rose 75mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia complete all as sp[ecified
S/F PVC connection of 15mm dia length 450mm with PTMT nuts fixed in repair
S/F PVC connection of 15mm dia length 600mm with PTMT nuts fixed in repair
S&Fixed in repair stope valve 15 mm dia , caster copper alloy, screwed down, high presseure fancy type chromium plated screwed f both ends for iron pipe or for unions with long shank and cup (concealed type) and fixed in repair
PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved patterns and design. Make: PRAYAG, CAT NO - 551 or equivalent as approved by GE
M&L for powder coated aluminum Deco grill/chequered mesh of size 75mm x 75 mm including 'U' channel etc; fixed in repairs complete all as specified and directed by Engineer-in-Charge
Removing plants / herbs grown on walls/junctions with roots treating with herbicide chemical & finishing the suface with CM 1:3 in any type/height of building upto 3rd floor
Demolition of brick and stone wall built in cement mortor incl all quoins, arches, pillars built in cement mortar complete all as specified
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified
Cleaning of water tank of capacity exc 500 ltrs but n. exc 1000 Ltr removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as directed by Engineer -in- Charge. (Note : The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.)
S&F in repair Peg set of three made of teak wood and Aluminium pegs of size 10cm complete al as specified and directed
S& F CP Grating 100 mm dia fixed in repaiir
S&F in repair brackets for curtain rod
S/F butt hinges 100 mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as Specified and directed.
M&L for in repair powder coated alluminium Door/window frame made of 91x 43x1.50mm sections and shutters made of 39.4x17.7x1.50 mm thick sections with 4mm thick tinted glass and mash shutter made of 39.4x17.7x1.50mm thick sections with fixed stainless steel wire mash including locking handle complete all as required and all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided for flooring
M & L 75mm thick PCC 1:3:6, C2 (using 40mm graded granite stone aggregate) in plinth protection finished even and smooth without using extra cement
M & L 100 mm thick PCC 1:2:4, B1 (using 20mm graded granite stone aggregate) in flooring complete all as specified
M&L for granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymer bonding agent (5 Kg per pack) with the applied thickness of the coating being between 0.8mm -1.2mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the direction/ supervision of the Engineer-in-charge, all complete. The above textured coating should conform to surface spread of flame class one of BS 476:Part 7:1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces complete all as specified and directed. Make:- Bakelite Hylam Limited or equivalent make approved by the GE.
S&F in repair 20 mm outer dia of pipe 3-layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV Stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plian & brass threated polypropylene random fittings fixed complete to walls, ceiling or in floors etc.
S & F in repair PPR pipes 32 mm outer dia laid in walls/floors including bends, elbows, unions etc, laid on walls and making good complete all as specified and directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as fixed in repair
S&F in repairs vanitee cabinate of overall size 0.90 mtr x 1.70mtr with one nos of mirror having size 0.75mtr x 0.80 mtr , one wash basin of size 0.50 x 0.30 mtrs,with one wash basin mixture of approved shade and size complete all as specified and as directed. Make- Jaquar or equivalents as approved by users.
S&F in repairs shower enclosure having overall size 1 mtr x 1mtr x 2.00 mtr height with 5-8mm thick glass with sliding door arrangements, having one complete shower panels of size 0.20 x 0.10 x 1.50 mtr height with over head shower, hand shower, mixing arrangements for hot and cold water etc complete all as specified and as directed. Make- Jaquar or equivalents as approved by users.
Providing and fixing in repairs Aluminum Composite panels in all coloures of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxident LDPE sandwitched between two skin of 0.5 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mmx20mm with 1mm thickness in 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction and all as specified and as directed by Engr-in-Charge. All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items include cost of aluminium frame, ACP Panels, Cramps, weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete). The manufacturer shall also give guarantee/warranty for ACP panels for a period of Five years. Make of ACP:- ALUPEX/ALUDECOR/ALSTRONG.
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner
M & L 40 mm thick PCC 1:2:4, B0 (using 12.5 mm graded granite stone aggregate) in roof covering complete all as specified
S & F 2mm thick PVC tiles/sheet, laminated,plain coloured, marbled, mosaic or mottled finish in floors complete all as specified and directed by engr in Charge
RAJESH ENTERPRISE
V D JADEJA
MADHAV ENTERPRISE
roxy enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .