Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | C SIHABUDHEEN L1 | salahudheen L2 |
|---|---|---|---|---|---|
| 1.00RENOVATION WORK | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.65 | cum | 320.17 ₹207.47 Lowest | 360.48 ₹233.59 |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 3 | sqm | 343.69 ₹1,031.07 Lowest | 386.97 ₹1,160.91 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.34 | cum | 8,220.42 ₹2,803.16 Lowest | 9,255.4 ₹3,156.09 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,006.18 | kg | 166.48 ₹1,67,508.51 Lowest | 187.44 ₹1,88,598 |
| 1.00 | OD464635/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 141.5 | sqm | 554.86 ₹78,512.69 Lowest | 624.72 ₹88,397.88 |
| 1.01 | OD464761/2025-2026:Providing and fixing 200mm wide,square cut PVC 4kgf/cm2 rain water gutter pipe with irorn brackets with 25x 5mm size MS flat screws and washers etc. including making necessory connections with rain water pipes etc. complete. | 27 | metre | 473.44 ₹12,782.88 Lowest | 533.05 ₹14,392.35 |
| 1.01 | 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 10 | metre | 491.75 ₹4,917.5 Lowest | 553.66 ₹5,536.6 |
| 1.01 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 1,856 | sqm | 18.23 ₹33,834.88 Lowest | 20.52 ₹38,085.12 |
| 1.01 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 1,856 | sqm | 101.42 ₹1,88,235.52 Lowest | 114.18 ₹2,11,918.08 |
Tender Value
₹5.1 L
EMD Value
₹12,709
Closing Date
25 Feb 2026, 5:00 pmClosed
AE CHEACODE GP
AE CHEACODE GP
Annual Plan Cheacode GP 2025 26 Project No 426 26 Panchayath Office Renovation General Civil Work
2026_LSGD_837582_2
TN5AELIDEWCHEACODE2526
Open Tender
Civil Works - Bridges
Item Wise
CHEACODE GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,125
Yes
₹12,709
Yes
30 Jun 2026
18 Feb 2026
27 Feb 2026
18 Feb 2026
25 Feb 2026
18 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1RENOVATION WORK | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | - | sqm | - | - |
| 1.003 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.005 | OD464635/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.006 | OD464761/2025-2026:Providing and fixing 200mm wide,square cut PVC 4kgf/cm2 rain water gutter pipe with irorn brackets with 25x 5mm size MS flat screws and washers etc. including making necessory connections with rain water pipes etc. complete. | - | metre | - | - |
| 1.007 | 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | - | metre | - | - |
| 1.008 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | - | sqm | - | - |
| 1.009 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | - | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tendernotice_2.pdf
PDF • 0.29 MB
Tendernotice_3.pdf
PDF • 0.24 MB
BOQ_1410617.xls
BOQ • 0.30 MB
AFDVT.pdf
Tender Documents • 0.28 MB
FOT.pdf
Tender Documents • 0.28 MB
SBD.pdf
Tender Documents • 1.06 MB
PAG.pdf
Tender Documents • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .