Shifting of 11KV and LT linePahafram mand farm kichha

Amount

Cartage of ST Pole SP-55 from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 1 to 35 Km including loading into truck at store centre unloading safely at dump store and carriage from dump store to pit site avarage distance 1 to 03 Km.

Cartage of P.C.C. Pole 8.5 Mtr. long from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 1 to 35 Km including loading into truck at store centre unloading safely at dump store and carriage from dump store to pit site avarage distance 1 to 03 Km.

Cartage of other line material from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 1 to 35 Km including loading into truck at store centre unloading safely at dump store and carriage from dump store to pit site avarage distance 1 to 03 Km.

Erection of following STP SP-55 Single pole support( Supplied by the department) on 300x300x75mm. stone paid including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr and making kicking block of size(Height 0.45x0.45 mtr round) above ground level on the pole in 1:3:6 CC including cost of drilling holes and cutting as required and cost of all material (sand, cement and stone grit ) required for the work, construction work with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Erection of following STP SP-55 Double pole support( Supplied by the department) on 300x300x75mm. stone paid including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr and making kicking block of size(Height 0.45x0.45 mtr round) above ground level on the pole in 1:3:6 CC including cost of drilling holes and cutting as required and cost of all material (sand, cement and stone grit ) required for the work, construction work with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Erection of following Double pole of P.C.C. Pole 8.5 Mtr long. support( Supplied by the department) on 300x300x75mm. stone paid including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr and making kicking block of size(Height 0.45x0.45 mtr round) above ground level on the pole in 1:3:6 CC including cost of drilling holes and cutting as required and cost of all material (sand, cement and stone grit ) required for the work, construction work with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.

Erection & Grouting of single P.C.C. Pole 8.5 Mtr. long ( Supplied by the department) including digging of pits, 0.6x0.6x1.5 Mtr. grouting of pit in C.C. ratio 1:4:8 in size with stone pad including cost of ballast cement and sand and with fitting of all accessories grouting & back filling with soil & boulder earthing complete work as per eRESPO specification & as per direction of Engineer-In-Charge.

Muffing of pole with CC 1:3:6 block and 45cm. Hight from ground level including cost of ballast cement and sand etc in all respect.

Fixing of Stay rod in pit including excavation of earth of size 6x0.6x0.9x1.2 Mtr. complete as per RESPO drawing No. RES-16 with stay rod 16x1800 stay sire 7/10 SWG( Stay set and wire will be provided by the department) and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60x0.60x0.60 Mtr. and earth filling complete in all respect with cost of cement sand & stone ballast and fixing of all other items with stay clamps safely elbow includikng proper nozelling etc. required for proper completion of work, as per direction of Engineer-In-Charge.

Laying spreading stringing and sagging of 11KV/LT line/ABC cabl;e single circuit on ACSR rabit/Weasal conductor double circuit with fitting of all accessories complete work as per direction of Engineer In Charge 11KV.line.

Laying spreading stringing and sagging of 11KV/LT line/ABC cabl;e single circuit on ACSR rabit/Weasal conductor double circuit with fitting of all accessories complete work as per direction of Engineer In Charge LT line 3 Phase , 4 wire.

Laying spreading stringing and sagging of 11KV/LT line/ABC cabl;e single circuit on ACSR rabit/Weasal conductor double circuit with fitting of all accessories complete work as per direction of Engineer In ChargeAB. Cable.

Fixing of 11KV, X-arm angle, V-Type 65x65x6mm. Including drilling holes and ferication as required.

Fabrication and fixing of Top Chabnnel/Dropper cdhannel bracking and sdervice brackets of M.S. Channel 100x50mm. With cutting drilling of holes and facrication work as required by Engineer In Charge as per requirement of site.

Fixing of M.S. Earthing rod 20x2500 mm. for earthing of supports as per RESPO drawing No. RES-12 including driving earth rod 2.5 mtr. deep below groundlvel connected to support with GI Wire No. 6swg, fixing of eargthing clamps 50x6mm. With bolts & buts eartghing lud etc, including all other material and balour T&P etc. required for proper completion of witk. ( WI Wire 6swg and eargthing rods will be provided by department )

Painting of of STP -55 Single support with one coat of red oxide primer & two coats of aluminum paint Berger Luxol quality over one coat of red oxide primer and P.O. red and two strip of fluorescent altemate red and white paint 30CM wide upto 1.5 Meter from ground level. complete in all respect including cost of Paint.

Painting of of STP -55 double pole with one coat of red oxide primer & two coats of aluminum paint Berger Luxol quality over one coat of red oxide primer and P.O. red and two strip of fluorescent altemate red and white paint 30CM wide upto 1.5 Meter from ground level. complete in all respect including cost of Paint.

Febrication and fixing of channel of T-Off and T-Off fixing and connection complete as per direction of Engineer-In-charge.

Route clearance by cutting of tree branches/proning lopping and chopping of trees for HT line.

Dismentling of existing transformer on existing double pole plinth reopen the connection & construction of plinth with a A class bricks works including 5" inch RCC on top solid construction by bricks no filling in should be permisable grouting of fencing & fixing of fendcing with Nut & bolt & Mounting of transformer with complete nuetral & body.

Dismental of old transformer and reerection of New transformer 25KVA/63KVA/100KVA. With earthing complete jumpring complete job

Dismentling of old execting STP pole with cutting of grounder & collect JE store Rudrapur with including loading, unloading.

Dismentaling of following 11KV/LT line & conductor wire opening of conductor, re rolling and making bundel open of all accessories complete as per directon of Engineer incharge of the work. 11KV.line.

Dismentaling of following 11KV/LT line & conductor wire opening of conductor, re rolling and making bundel open of all accessories complete as per directon of Engineer incharge of the work. 1LT line 3Ph. 4 wire.

Dismentaling of following 11KV/LT line & conductor wire opening of conductor, re rolling and making bundel open of all accessories complete as per directon of Engineer incharge of the work. AB Cable.

Back cartage of Scrab/Dismentaling material from work site to JE store Rudrapur.

Supply of Holding clamps STP, M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of Holding clamps PCC, M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of Stay clamps for STP, M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of Stay clamps for PCC M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of F- clamps for STP M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of F- clamps for P.C.C. M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of LT Clamps for STP M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of LT Clamps for PCC M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Shackle Insulator.

Aluminium Lug.

Nut & Bolts Off size.

Supply of Bracket Clamps. M.S. Clamps M.S. Clamps made of Best quality M.S. flat of size 50x6mm. duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample. Including required Bolt, Nut & wahsers.

Supply of Wiremessh fencing size 8x6 as per RESPO Specification.

Lug 50/70//120sq.mm.

Suspension clamps with I hook.

Dead end clamps.

Distribution Box with cable

Aluminium to Aluminium conductor.

M/s JAY ELECTRCIALS