SPECIAL REPAIRS ADDITION_ALTERATION TO BUILDING NO P_61 AT CGDHQ_15, OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkhats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels with decorative laminates 0.9mm on both sides complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) complete all as specified and directed.

S&F Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F 75mm long, stainless steel Butt hinges complete all as specified and directed.

S & F 125mm long, stainless steel Butt hinges complete all as specified and directed.

S&F 150mm long stainless steel barrel fancy tower bolts of (ISI Marked) complete all as specified and directed.

S&F 200mm long stainless steel barrel fancy tower bolts of (ISI Marked) complete all as specified and directed.

S&F 300mm stainless steel fancy sliding door bolt with hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S&F 250 mm long Stainless steel fancy handles, (ISI Marked) complete all as specified and directed.

S&F150 mm long Stainless steel fancy handles, (ISI Marked) complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F Aluminium door closer hydraulically regulated, designation No 2, universal type, sutiable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S & F 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming stiles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge Make : RAJSHREE/SINTEX

S & F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with 19x 19mm MS square tubes, provided with EPDM rubber gasket throughout the frame fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge Make: RAJSHRI/SINTEX)

M & L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate as in leveling course complete all as specified and directed.

M&L double charged vitrified ceramic tiles with light shade 10 mm thich Square or Rectangular polished area of each tilles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick scread bedding in cement mortar 1:4 , complete all as specified and directed.

M&L double charged vitrified ceramic tiles with light shade 10 mm thich Square or Rectangular polished area of each tilles vertical surfaces exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 10 mm thick backing coat in cement mortar 1:4 , complete all as specified and directed.

M& L Non-Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bedding layer in CM 1 : 4 complete all as specified and directed.

M& L Non-Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bedding layer in CM 1 : 4 complete all as specified and directed.

S&F coloured glazed ceramic tiles 600x300mmx10mm thick on vertical surfaces including 10mm thick backing coat in CM 1:4 Such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

S&F coloured glazed ceramic tiles 600x1200mmx10mm thick on vertical surfaces including 10mm thick backing coat in CM 1:4 Such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

M&L for 20mm granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms in single piece, bullnosing/rounding to edges of stone slab and two No grip line for stair case treads, and like in cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed in cement (1 : 6) complete all as specified and directed.

S & F PVC (SWR) floor trap with grating including jointing with solvent 75 mm bore complete all as specified and directed.

S & F PVC (SWR) pipe single socketed 110 mm dia in any length, jointing with cement solvent solution, fixed to walls, floor or ceiling complete all as specified and directed.

S & F PVC (SWR) pipe single socketed 75 mm dia in any length, jointing with cement solvent solution, fixed to walls, floor or ceiling complete all as specified and directed.

S & F PVC (SWR) bend with door acess for 110 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) bend with door acess for 75 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) single Tee with door acess for 110 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) single Tee with door acess for 75 mm dia pipe complete all as specified and directed.

S&F 110 MM dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F 1000 Litre three layered capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S & F 25mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and lay of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and lay of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S & F Rimless Wall Hung WC with UF Soft Close seat cover, Hinges, Accessories set, size 400x580x370mm complete all as specified and directed. Make : Jaquar Cat Part No VHS-WHT-81953UF or equivalant

S & F Rimless Wall Hung WC with PP Soft Closeslim seat cover, Hinges, Accessories set, size 360x545x380mm complete all as specified and directed. Make : Jaquar Cat Part No FLS-WHT-5953PPSM or equivalant

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

S&F Grating square 150mm size of PTMT (Min wt 100 gms) complete all as specified and directed.

S&F 15mm bore CP two way angle valve, fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position complete all as specified and directed.

S&F 15mm bore CP two way Bib Tap with wall flange, fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position complete all as specified and directed. Make : Jaquar Cat Part No ARI-39041

S&F Brushed Stainless steel shower panel of size 1400x200mm with inbuilt Anti-finger print stainless steel body, ABS top shower with 50 nozzels, ABS body massage jets, Chrome plated, Chrome plated ABS hand Shower, Brass spout, Multi function water diverter, Brass faucet body with Hot & Cold mixer, 40cm stainless steel braided hose, operating pressure - minimum 2 bar and 1.5 m stainless steel double locked flexible hoses complete all as specified and directed. (Jaquar Cat Part No JPL-SSF-ST8858B3 or equivalent)

S&F Exposed shower pipe with provision for simultaneous working of showers with Operating Divertor Knob, Round Shape 24mm, Size 975x370mm with Sliding Holder for hand shower, Wall bracket & 15 mm Concealed Water Inlet Connection complete all as specified and directed. (Jaquar Cat Part No SHA-1215R)

Metro Pole flush valve Regular 32mm size (Concealed body) with exposed shut off provision (fixed discharge of 4.00 ltr per flushing) mm dia Jaquar Cat Part No FLV-1095NG complete all as specified and directed.

S&F Double Arm Wall Mounted reversible plain/magnifying (X3) Pivtol Mirror (Jaquar Cat Part No ACN-1193N) complete all as specified and directed.

S&F 15mm dia Pillar tap Single lever tall body with 150mm extetion body and 600mm long braided Hoses Jaquar Cat Part No ARI - 39005B complete all as specified and directed.

S&F 15mm dia Sink cock with regular swinging spout (wall mounted model) with wall flange. Jaquar Cat Part No ARI - 39347S complete all as specified and directed.

S&F Towel Rack 600 mm long with lower hangers complete all as specified and directed. Make : Jaquar Cat part No AQN - 7781 or Equavalent

S&F Towel Ring Square with round flange complete all as specified and directed. Make : Jaquar Cat part No ACN - 1121N or Equavalent

S&F Tumbler holder complete all as specified and directed. Make : Jaquar Cat part No ACN - 1141N or Equavalent

S&F Toilet Roll Holder complete all as specified and directed. Make : Jaquar Cat part No ACN - 1151N or Equavalent

S&F Soap Dispenser with glass Bottle complete all as specified and directed. Make : Jaquar Cat part No ACN - 1135N or Equavalent

S&F Single lever (3 inlet high flow diverter) exposed parts kit of divertor consisting of operating leve, wall flange (with seals) & button only complete all as specified and directed. (Cat Part No ARI-39065K)

S&F Spout with button attchment for hand shower complete all as specified and directed. Make : Jaquar Cat Part No SPJ-463 or equivalent

S&F Health Faucet with 8 mm dia, 1.20 mtr long flexible tube & wall hook complete all as specified and directed. Make : Jaquar Cat part No ALD - 573 or Equavalent

S&F Counter top Wash hand Basin complete all as specified and directed. Make : Jaquar Cat Part No : SLS-WHT-6905

M&L only 18mm thick plywood, grade bwr, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard bar 60 cm long complete all as specified and directed.

S&F 5.5 thick set of 3 glass corner shelf complete all as specified and directed.

M&L for providing and fixing 10 mm thick plaster of paris including for sunk or raised moulding ceiling (Gypsum anhydrous) to flat surface, GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mm length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including taking down existing ceiling of any specification complete all as specified and as directed.

M&L for granules textured homogeneous wall finishing system including preparation of old surfaces consisiting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymerbonding agent (5 Kg per pack ) with the applied thickness of the coating being between 0.8mm - 1.2 mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the ddirection/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces complete all as specified and as directed by Engr-in-Charge. Make : Bakelite Hylam Limited or equivalent make approved by the GE

M&L 5mm thick superior quality D-Stona sheet, approved shade and sizes, as in wall panelling fixed with syntheric adhesive SR - 404, on 12 mm thick BWR plywood as per manufacturers insturctions complete all as specified and directed. (Note : 12 mm thick BWR plywood measured and paid separately)

Excavation in post hole each n exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer n exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surfaces in soft/loose soil complete all as specified and directed.

M & L Cement concrete in foundation filling and mass concrete type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

S&F for steel work in tubular trusses, posts, purlins and rafters including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1998 grade St - 240 complete all as specified and directed.

M & L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described two coat synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls/ ceiling, prerparation of surface by applying two coats of interior royale velvett plastic emulsion over a coat of primer over a layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement).

Providing and fixing of kitchen cabinet of size over head 3.00 x 0.60mtr, shutter cabinet 2x0.53 x 0.80 mtr,1.25x0.88, 1 x pull out shutter, 2 x plain drawer + cutllery, 4 x plain drawer and kitchen platform 4.25 x 0.60mtr, plywood - water proof green or equivilent with both side 1mm thick laminate in side white laminate and outside as per user requirment complete all as specified and directed.

S&F 32 mm dia Brass Chromium Bottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing and cap and fixed complete all as specified and directed.

S&F 25 mm dia decorative Draphery rod with brackets fixed in walls with wooden/plastic gutties and screws complete all as specified and directed.

Providing and fixing of wardrobe of size 1.72 x 1.80mtr with sliding shutter, shelf including all fittings and acessories, plywood - water proof green or equivalent with both side 1mm thick laminate in side white laminate and outside as per user requirment complete all as specified and directed.

S&F Display box of 5 mm thick acrylic sheet box in cubical shape of size 1.20 x 1.20 mtr with 10 Nos of Roman alphabets with suitable lighting arrangements complete all as specified and directed.

Supply only 12 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M&L for 0.9mm decortive laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer insutruction complete all as specified and directed.

S&F 5.5mm thick frosted ordinary sheet glass quality and glazing with putty in each pane not exc 0.5mm thick fixed complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed. Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

M&L for Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified :- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

One light point or one fan point controlled by one switch with cables 1.5 sq mm size complete all as specified and directed.

One 3 pin socket outlet 6 amps on the independent, with cables 1.5 sq mm size complete all as specified and directed.

One 3 pin socket outlet 6 amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

One light point controlled by two switch with cables 1.5 sq mm size complete all as specified and directed.

Two light point controlled by one switch on the same switch circuit complete all as specified and directed.

M&L for Point wiring complete with 2.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified :- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

S & F modular type 6 A one-way complete all as specified and directed. switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type 16 A one-way complete all as specified and directed. switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular fan regulator, 100 watt, 1 moduler complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M & L for ceiling rose, surface bakelite, 65x17 mm three terminals complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type bell switch 6 A one-way switch, 1 module complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type switch 6 A two way switch, 1 module complete all as specified and directed. Make :- Crabtree(Athena) / Anchor (vision) / Havell's (Oro)

S & F bell modular type of two module complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply and fix reccessed type downlighter LED fitting 18/20 Watt ,5700K, cool white, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire complete all as specified and directed. Make : Philips(DN296B LED20S-6500 PSU WH)/Wipro/ Osram

Supply and fix reccessed type downlighter LED fitting 12 Watt ,3000K, Warm white/ NW, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire complete all as specified and directed. Make : Philips(12W Sky Spot COB (WW))/Wipro/ Osram

Supply and fix strip type LED fitting 5 m length, with mounting accesseries ,6500K, Cool white, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire complete all as specified and directed. Make : Philips(LED Strip SKYCove 5M CDL with driver)/Wipro/ Osram

S & F in repair VTPN DB 04 Way made of CRCA sheet, for flush mounting type with 250 Amp busbar copper, fully insulated & shrouded neutral bar, earth bar, fixed on wall, Prefitted masking sheet, Reversible Door confirming to IP 54 complete all as specified and comprising of following:- (i) MCCB 100 amp FP 36 KA 01 no (incoming) (iii) MCB 6/32 amp SP 10 KA C Curve : 12 Nos MAKE: DB & MCCB/MCB : SCHNEIDER/ LEGRAND/ HAGER

M & L for submain wiring in existing surface/ Wall using IS:694- 1990 marked 1.1 kV grade single core HR-FR flexible cable having multi- drawn thin strands of electrolytic copper conductors and insulation for phase & neutral and earth continuity conductor connecting to earth dolly, drawn in medium grade non-metallic PVC conduit not less than 25 mm dia., colour-coded and making good of disturbed surfaces of wall/ceiling/floor complete all as specified and directed. [NOTE: 02 runs of phase & neutral conductors, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length.]

2 X 2.5 SQ MM + 1 X 2.5 SQ MM

2 X 4 SQ MM + 1 X 4 SQ MM

Taking down existing sub main wiring complete, including fixture and fittings removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed.

Supply and Fix Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. Make: Almonard/Havells/khaitan

Supply & fix Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: Almonard/Havells/khaitan

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.

Supply and Fix Thermoplastic CB Box 01 row , 9 Module of size 202 x 238 x 111 -with Terminals and lugs for cable of any size with necessaries fittings confirming to IP 65 Protection with metric knock out for cable entry complete all as specified and directed. Make :- Hensel/ Neptune/ Rittal/ Hager

S&F MCB SPN 16/32 A 10 KA, 240 V in CB Box Box complete all as specified and directed. Make: Legrand/ Schneider/Hager

Supply and fix Hard chrome plated stainless steel with silicon sealed glass offers colourful illumination for waterbody surface mounted fitting 18 Watt , with driver complete all as specified and directed including connecting cable of luminaire complete all as specified and directed. Make : Wipro (Arcus)/ Philips/HPL

S&F MCB SP 06/32 A 10 KA, 240 V in CB Box Box complete all as specified and directed. Make: Legrand/ Schneider/Hager

Supply & fix modular MCB, 25/32 Amps, 1 module complete all as specified and as directed. Make :- Legrand/ Schneider / Hager

Supply and installed submersible pump set , electric drivern 1 phase, 240 V (+10 or -10), confirming IP 68, SS Body, CI/Bronze impeller of head range 10-16 m, discharge 9.7-5.2 LPS capacity including starter installation and fittings complete all as specified and directed. Make :- Kirloskar / equivalent in Crompton

Taking down old / Existing Out door unit and M&L for detecting the cause of leakage in any type/capacity of 1.5 tonne/2.0 AC and ensuring the complete system leak proof and charging of refrigerant gas with appropriate quantity and re install on roof including providing appropriate water piping and as directed by EIC including testing for smooth functioning complete all as specified and directed.

Supply and install surface mounted vertical storage type 25 Ltr capacity, suitable for pressure pump, High Density PUF Heat Insulation,including mounting accessories and installation complete all as specified and directed.

Shivaang Enterprise

natwarsinghdipsingh

vijay infraprojects pvt ltd

K K Construction Co

Harsh Infrastructure

M/S. P.M GODHANIYA

shree chamunda enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO