Construction of Nagarpalika Library at Kheralu, Dist. Mehsana

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

Twenty Eight Thousand

mm removal of stumps of trees cut earlier and disposal of

1 0.13 28,455.09 Four Hundred Fifty Five

unserviceable materials (C) By mechanical means in area of light Rupees Nine Paise

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated One Hundred Fifty Seven

2 stuff upto 50 Meter lead.(B) Dense or Hard soil Cmt 414.30

Rupees Seven Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the Two Hundred Eighty Seven

3 excavated stuff upto 50 Meter lead.(C) Hard Murrum Cmt 164.60

Rupees Forty Six Paise

Filling in plinth and foundation with sand under floors including

watering ramming, consolidating and dressing complete Three Hundred Ninety Nine

Rupees Ninety Three Paise

layers of 20cm. thickness including watering, ramming and Two Hundred Sixty Nine

5 consolidating etc. complete. (more than 10 ton) Cmt 503.30

Rupees Seventy Five Paise

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding One Hundred Thirty Six

6 20 cm. in depth consolidating each disposited layer by Cmt 389.90

Rupees Ninety One Paise

ramming and watering.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is recommended

i.e one liter 20 EC chemical emulsion with 19 liter give 1 % Smt. Eighty Six Rupees Eighty

concentration inclusive of one liter chemical emulsion application at

the rate of 5 Liter chemical/ Sqm of surface is recommended as per

I.S. (The Product performance shall carry Guarantee for 5 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing Three Thousand Five

8 complete excluding cost of formwork in (A) Foundation and Plinth Cmt 156.30 3,587.13 Hundred Eighty Seven

Rupees Twelve Paise

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

sand : 6- crushed stone aggregates 20 mm nominal size) and curing Three Thousand Nine

9 complete including cost of formwork in (A) Wall Caps / Coping Cmt 0.00 3,922.25 Hundred Twenty Two

Rupees Twenty Five Paise

GRADE SLAB (M200) : Providing and laying controlled cement

concrete M.200 Concrete with all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the Four Thousand Six Hundred

10 cost of formwork but excluding the cost of reinforcement for Cmt. 37.10 4,670.54 Seventy Rupees Fifty Four

reinforced concrete work in M200 Grade Slab Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in Foundations Four Thousand Six Hundred

footings, base of columns and Raft etc., for any type of cross section Ten Rupees Sixty Five Paise

area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Six Hundred

excluding the cost of reinforcement for RCC work in column up to

12 Cmt. 11.00 6,678.12 Seventy Eight Rupees

plinth lvl. etc., for any type of cross section area complete as

Twelve Paise

directed by E. I. C.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Five Hundred

excluding the cost of reinforcement for RCC work in TIE, GROUND,

13 Cmt. 50.10 6,595.30 Ninety Five Rupees Thirty

& PLINTH BEAMS for any type of cross sectional area. etc., complete

as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall Seven Thousand Nine

14 (Vertical and horizontal fins)., & (F1) Wall cap & coping up to G.F. Cmt. 28.50 7,938.80 Hundred Thirty Eight

level., etc. Complete, as per detailed & directed by Architect / Rupees Eighty Paise

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall Seven Thousand Nine

15 (Vertical and horizontal fins)., & (F1) Wall cap & coping For First Floor Cmt. 2.50 7,979.10 Hundred Seventy Nine

level., etc. Complete, as per detailed & directed by Architect / Rupees Ten Paise

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (F) Wall

Eight Thousand Nineteen

16 (Vertical and horizontal fins) & (F1) Wall cap & coping For For Second Cmt. 0.20 8,019.30

Rupees Twenty Nine Paise

Floor level., etc. Complete, as per detailed & directed by Architect /

Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Seven Thousand Seven

excluding the cost of reinforcement for RCC work in (D) For Columns

17 Cmt. 17.50 7,732.66 Hundred Thirty Two Rupees

for any type of cross sectional area for G.F. Lvl. etc., for any type of

Sixty Six Paise

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Seven Thousand Seven

excluding the cost of reinforcement for RCC work in (D) For Columns

18 Cmt. 15.60 7,772.96 Hundred Seventy Two

for any type of cross sectional area Work at First floor etc., for any

Rupees Ninety Six Paise

type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns Seven Thousand Eight

19 for any type of cross sectional area Work at Second floor etc., for any Cmt. 5.30 7,813.16 Hundred Thirteen Rupees

type of cross section area complete as directed by E. I. C. Fifteen Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Eight

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

20 Cmt. 12.20 6,837.60 Hundred Thirty Seven

LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc.,

Rupees Fifty Nine Paise

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Eight

excluding the cost of reinforcement for RCC work in LINTLE-BEAM,

21 Cmt. 6.80 6,877.80 Hundred Seventy Seven

LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc.,

Rupees Seventy Nine Paise

complete as directed by E. I. C.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Six Thousand Nine Hundred

LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc., Eighteen Rupees Nine Paise

complete as directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

Six Thousand Eight

cement, 3 Fine sand) to give a smooth and even surface centering

23 Cmt. 10.10 6,855.98 Hundred Fifty Five Rupees

and formwork and curing complete excluding cost of reinforcement.

Ninety Eight Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Eight

excluding the cost of reinforcement for RCC work in SLAB BEAMS for

24 Cmt. 28.90 6,837.60 Hundred Thirty Seven

Ground floor & Super structure, & for any type of cross sectional

Rupees Fifty Nine Paise

area. etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Eight

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

25 Cmt 19.80 6,877.80 Hundred Seventy Seven

First Floor & for any type of cross sectional area. etc., complete as

Rupees Seventy Nine Paise

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS at Six Thousand Nine Hundred

Second Floor to Terrace Floor & for any type of cross sectional area. Eighteen Rupees Nine Paise

etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Five Hundred

excluding the cost of reinforcement for RCC work in Staircase with

27 Cmt 13.20 6,588.23 Eighty Eight Rupees Twenty

steps / Kadi Tappa, waist slab and landing at any height and level as

Three Paise

directed etc., complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

Six Thousand Six Hundred

excluding the cost of reinforcement for RCC work at Plinth to

28 Cmt 43.40 6,632.97 Thirty Two Rupees Ninety

Ground FLOOR SLAB for all thickness/cross section etc. complete as

Seven Paise

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but Six Thousand Six Hundred

29 excluding the cost of reinforcement for RCC work at FIRST FLOOR Cmt 33.40 6,673.27 Seventy Three Rupees

SLAB for all thickness/cross section etc. as directed by E. I. C. Twenty Seven Paise

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but Six Thousand Seven

30 excluding the cost of reinforcement for RCC work in SECOND FLOOR Cmt 9.90 6,713.47 Hundred Thirteen Rupees

SLAB for all thickness/cross section etc. complete as directed by E. I. Forty Seven Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto ground floor Seventy Seven Rupees

level Twenty Eight Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

Seventy Eight Rupees Thirty

32 bending, binding and placing in position complete upto First floor Kg 10883.00 78.34

level Three Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

Seventy Nine Rupees Thirty

33 bending, binding and placing in position complete for Second floor Kg 3813.00 79.39

to terrace floor Lvl. Eight Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Three Thousand Four

34 Cement Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional Cmt 38.20 3,424.52 Hundred Twenty Four

Rupees Fifty One Paise

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Three Thousand Seven

35 Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Cmt 74.10 3,706.17 Hundred Six Rupees

Floor etc. Complete. Seventeen Paise

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Three Thousand Seven

36 Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For First Floor Cmt 45.30 3,740.71 Hundred Forty Rupees

etc. Complete. Seventy Paise

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor

Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional Three Thousand Seven

37 For above First Floor to Terrace Floor etc. Complete, as per detailed Cmt 26.40 3,775.24 Hundred Seventy Five

& directed by EIC. Rupees Twenty Three Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

38 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry at

Five Hundred Ninety

Ground Floor level.(B) Conventional Rupees Twenty Four Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

39 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry at

Five Hundred Ninety Five

First to Terrace Floor Lvl.(B) Conventional Rupees Fifty Nine Paise

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

40 (1- Cement : 4 -coarse sand ) (B) Conventional half brick masonry at

Six Hundred Rupees Ninety

Terrace Floor Lvl.(B) Conventional Five Paise

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any

height with all labour & material, etc. Complete, as per detailed & Three Hundred Twenty Six

41 directed by EIC. Smt 223.30

Rupees Twelve Paise

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering for One Hundred Sixty Five

42 Ground floor level and finished even and smooth in (ii) Cement Smt 411.30

Rupees Thirty Paise

mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering for

One Hundred Eighty Nine

43 First floor level and finished even and smooth in (ii) Cement mortar Smt 394.60

Rupees Twenty Five Paise

1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering at

44 Second Floor to Terrace floor level and finished even and smooth in

Two Hundred Thirteen

(ii) Cement mortar 1:4 (1-cement :4-sand) Rupees Twenty Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering for Ground Floor level One Hundred Fifty One

45 and finished even and smooth in (ii) Cement mortar 1:4 (1- cement Smt 293.30

Rupees Thirty Seven Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering for First Floor level and One Hundred Seventy Five

46 finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4- Smt 266.60

Rupees Thirty Two Paise

Providing 10mm thick cement plaster in single coat on

brick/concrete Ceiling for interior plastering at Second Floor to

One Hundred Ninety Nine

47 terrace floor Lvl. and finished even and smooth in (ii) Cement Smt 51.20

Rupees Twenty Seven Paise

mortar 1:4 (1- cement :4-sand)

Providing and applying Texturer finish on RCC elements to give

expose finish of approved shade and brand. Job includes proper

48 griding of RCC joints before applying texture, complete with

One Thousand Sixteen

scafolding directed as per Architect and EIC Rupees Twelve Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick

cement plaster in cement mortar (1 Cement:4 coarse sand) in rough

finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement: 2 Two Hundred Eighty Four

Coarse sand) finished rough / with Trovel including scaffolding Rupees Thirty Two Paise

curing etc. complete.

Washed stone grit plaster on exterior walls height upto 10 metre

above ground level, in two layers, under layer 12 mm cement plaster

1:4 (1 cement : 4 coarse sand ), furrowing the under layer with

scratching tool, applying cement slurry on the under layer @ 2 Kg of

cement per square metre, top layer 15 mm cement plaster 1:1/

2:2(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal Nine Hundred Ninety Five

50 size), in panels with groove all around as per approved pattern, Smt 508.40 995.30

Rupees Thirty Paise

including scrubbing and washing the top layer with brushes and

water to expose the stone chippings ,complete as per specification

and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

Forty Three Rupees Four

51 projections. Rmt 551.90 43.05

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the One Thousand Eighteen

shade of slab including rubbing and polishing etc. complete. (A) Rupees Ninety Nine Paise

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement mortar

1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury One Thousand One

53 mixed with pigment to match the shade of slab including rubbing Smt 35.90 1,166.93 Hundred Sixty Six Rupees

and polishing etc. complete. Ninety Three Paise

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

One Thousand Four

including dismentaling of existing flooring and jointed with color

54 Smt 33.50 1,467.72 Hundred Sixty Seven

cement slurry including finised with flush pointing & cleaning the

Rupees Seventy Two Paise

surface etc. complete for antiskit.

Providing and laying Vitrified tiles 8 to 10 mm thick 24" x 24" or as

specified in skirting risers of steps and dedo on 10mm thick. cement One Thousand One

55 plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement Smt 250.90 1,195.02 Hundred Ninety Five

slurry as per the detailed by Architect & direction of Engineer-in- Rupees Two Paise

Providing and laying Ceramic tiles 6mm thick in flooring, treads of

steps and landing laid on a bed of 12mm thick Water proof cement

plaster with mortar 1:3 (1-cement : 3- coarse sand ) & Water

Proofing Chemical Agent and cement vata (10cm. x 10 cm. size)

One Thousand Two

quarter round in cement mortar 1:1 including neat cement finishing,

56 watering etc. complete finishing with flush pointing in white cement. Smt 34.00 1,215.03 Hundred Fifteen Rupees

Three Paise

(For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of

steps and dedo on 10mm thick Water proof cement plaster with

mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical One Thousand Two

57 Agent and finishing with flush pointing in white cement. (For UG Smt 99.00 1,276.99 Hundred Seventy Six

Tank walls) Rupees Ninety Nine Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished,

machine cut Granite of any colour and shade, & finish, as per

detailed by architect / Consultantfor flooring, dado skirting,

cladding, steps and risers, kitchen platforms, vanity counters,

window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar

1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on

Three Thousand Three

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement :

58 coarse sand), joints treated with white cement, mixed with matching Smt 159.00 3,396.53 Hundred Ninety Six Rupees

Fifty Two Paise

pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x

TO 6 mm as per detailed groove, rubbing, curing, moulding and

polishing to edges to give high gloss finish as per concept etc.

complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse

59 sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

One Thousand Sixty Six

including rubbing and polishing etc. complete. (B) 30mm thick. Rupees Ninety Four Paise

Providing and fixing sandwich type platform including supplying

and fixing granite stone 18 mm thick mirror polished stones in top

and side position and vertical strip at front over 25 mm thick

polished kota stone platform fixing in top and sides and Seven Thousand Three

60 intermediates supports fixing with cement mortar and adhesive and Smt 3.00 7,347.60 Hundred Forty Seven

finishing including making recess for Kitchen/ Laboratory sink etc. Rupees Fifty Nine Paise

complete as approved and directed by Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including Seven Hundred Seventy

61 rounding off junctions and extending them upto 15 cm along the Smt 275.30 779.70 Nine Rupees Sixty Nine

wall,clearing with water and oxalic acid etc. as directed. (The Product Paise

performance shall carry Guarantee for 10 years)

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

coarsesand: 4-graded stone aggregate 20mm nominal size) laid in Three Hundred Fifty Two

62 one layer and finished with a floating coat of neat cement. (B) 50mm Smt 29.30

Providing wood work in frames of Size 12.5 x 10 Cm. for doors,

windows, clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners of

required dia & length Incl. Providing and fixing 35 mm thick (or as

specified) ISI marked flush door shutters conforming to IS :

(Part I) decorative type, core of block board construction with frame

of 1st class hard wood, with 1mm. thk, ISI marked designed laminate

in any finish on both faces of shutters., slit openings with bidding

Patti & 6mm thk designed acid wash glass,. Stainless Steel butt Six Thousand Seven

63 hinges [125x65x2.5mm. IS1281712] with necessary screws, using Smt 41.20 6,771.29 Hundred Seventy One

branded S.S. matt /glossy / platinum finished accessories, Colour / Rupees Twenty Nine Paise

polishing all bidding parts, and also incl. with all Material, labour,

tools, tolerance, scaffolding etc. complete as per concept /direction

and approved by Architect, and directed by Engineer-In-Charge.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series OR Equivalent), hI-perfomance Sliding/

Openable window/door with Required thick toughened designer

glass of Saint Gobain or equielent, is used for Aluminum Hi-Profile

Section with necessary accessories and with additional shutter with

Stainless Steel Mosquito net. [In Opening Position always one of

Mosquito net shouter should be in Close Position], captive bead,

extremely difficult to remove once glazed, high performance

weather stripping, internal wedge gasket, Bottom, side and top

section including necessary filling up the gaps at junctions, with

required EPDM rubber/ etc. and ISI ebco make,"Lx. Premium"

Required Finish door fixture Accessories As per Architect Concept, Seven Thousand Seven

64 High security interlocking bead, Sheet membrane flashing , 2" over Smt 112.40 7,742.61 Hundred Forty Two Rupees

jamb flashing, New Blocking with new backer rod and sealant, Sixty Paise

channel glide with runner, slide fold hinge when ever need of

sufficient capacity, with warranty, all types of material, labour,

transportation, tools tolerance and matching required level with

Flooring etc. complete as per Architect concept and as per detailed

by Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour One Thousand One

65 anodized alluminium frame for ventilation with 5 mm thick frosted Smt 4.50 1,175.56 Hundred Seventy Five

glass as details etc complete for Ventilation Rupees Fifty Five Paise

Providing and fixing hydraulic door closer of approved size and

make as directed engineer in charge. all lift, level and leads. Six Hundred Thirty Nine

Rupees Ten Paise

Providing & Fixing M.S. grills of required pattern to wooden frames

of windows, RCC or as specified in drawings etc. with M.S. flats at

67 required spacing & frame around, square or round bars with round

One Hundred Six Rupees

headed bolts & nuts or by screws (A) Plain Grill, as per detailed & Twenty Nine Paise

directed by EIC.

Providing, supplying, fixing, fabricating, erecting, aligning the

structural steel like pivot ,tubular 'T', 'I" section, angle, plate, beam,

channel section, Bar , hollow box or Z purloins, Round or Square

Pipes, of approved make, for built up purloins, roof trusses,

columns, side runners, tie beams, sag rods, base plates gusset

plates, cap plates, bearing bracing, gantry girders, rails, require

support, pipes, including all welded or bolted steel structures of

various types with approved I.S.I. mark electrodes, bolts, anchor

bolts including cost of thread, Anchor plate cleats etc. in RCC or

masonry work, including cutting, bending, welding ,fixing, supplying

, Fabricating Decorative fevisted section or any structured member

required to complete the job for Bridge, Trusses, Canopy, doors,

One Hundred Thirty One

68 Frame, Railing, Entrance gate, pergola, Decorative hanging light , Kg 1756.00

Rupees Eighty Two Paise

New window, parking shed or space frame or any other required

specified area as shown on drawing and detailed specification or as

per design incl. three coats of approved brand primer and two coats

of paints, necessary scaffolding, tools tolerance etc. complete as

directed by Engineer In Charge. (payment will be made for weight of

metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

69 thoroughly brushing the surface to remove all dirt, and remains of

Seventy Three Rupees

loose powdered materials.etc complete. Seventy Five Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats

of primer at Wall painting (two coats) with plastic emulsion paint of

approved brand & manufacture on undecorated wall surfaces to give

an even shade including thoroughly brushing the surface free from One Hundred Twenty Three

mortar droppings & other foreign matter & sand papered smooth, as Rupees Fifty Six Paise

per detailed & directed by EIC.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats

of primer at Ceiling painting (Two coats) with plastic emulsion paint

of approved brand and manufacture on undecorated Ceiling surface

to give an even shade including thoroughly brushing the surface free One Hundred Twenty Nine

from mortar droppings and other foreign matter and sand papered Rupees Five Paise

smooth, as per detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

72 shade including cleaning the surface an even shade including

One Hundred Twenty Nine

cleanicn the surface of all dirt, dust and other foreign matter. Rupees Three Paise

Providing and fixing roof panel shall be made out of 0.5 mm thick

pre coated GI sheet . The Precoated sheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-

18 micron. The PPGI Sheet shall have plastic protective guard film of

73 minimum 25 microns to avoid scratches during transportation. The

Eight Hundred Sixty Seven

ridge shall be fixed to the steel members by pop rivet or self Rupees Thirty Eight Paise

drilling/self stitching fastners @ maximum 450 mm c/c along length

of capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos.

16mm dia SS pipe of 16 gauge, round balustrade of 32mm [50mm

16G Grade 304 with glossy finish consisting of 32 NB or nearest size

vertical posts 900 Height at maximum spacing 900c/c with suitable

cups at bottom and top rail of 50 NB or nearest size & intermediate

rails of 16 NB or nearest size etc complete] with complete assembly

of SS studs to house the horizontal 16mm pipes and top handrail,

bend and coupler to be used as per architectural detail drawings for

the railing in parapet, stair etc. including fabricating, hoisting, fixing Three Thousand Six

74 in position with angle cleats, holdfast etc. in RCC or masonry in true Rmt 51.80 3,646.91 Hundred Forty Six Rupees

line level and plumb, including complete assembly, including matt Ninety Paise

polishing and buffing complete, including scaffolding etc. complete

as directed by EIC.(Actual length of stair railing shall be measured at

site & same shall be paid. No wastage should be measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail

of 50 NB or nearest size complete] with complete assembly, bend

and coupler to be used as per architectural detail drawings for the

railing in parapet, stair etc. including fabricating, hoisting, fixing in

position with angle cleats, holdfast etc. in RCC or masonry in true One Thousand Three

75 line level and plumb, including complete assembly, including matt Rmt 38.30 1,356.18 Hundred Fifty Six Rupees

polishing and buffing complete, including scaffolding etc. complete Seventeen Paise

as directed by EIC.(Actual length of stair railing shall be measured at

site & same shall be paid. No wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic

Grade Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x

6mm. Descaling and degreasing the board as per requirement using

epoxy reflactive process by screen painting as directed etc. complete

including transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-2012 design. A Seven Thousand Six

76 warranty for 7 years for the Retro reflective sheeting from original Smt. 4.50 7,610.66 Hundred Ten Rupees Sixty

manufacturer & a certified copy of 3 year outdoor exposure test Six Paise

report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro

reflective sheeting

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT

of 1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700%

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs Nine Hundred Seventy Nine

77 6. Tensile Strength N/mm² ≥ 2.2 Smt 274.60

Rupees Fourteen Paise

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for Six Hundred Ninety Nine

levelling and filling the joint with sand in proper line and level as per Rupees Eighty Three Paise

guidlines of IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length, 30cm height and 15cm thick of

M200 grade concret as per approved design and including Three Hundred Eighty

79 excavation for fixing in proper line and level, filling the joint with Rmt 40.00 383.38 Three Rupees Thirty Seven

C:M 1:3 (1 cement:3 fine sand) etc complete. Paise

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: 1:2:4 Cement

Concrete laid in required slope at concrete floor as directed and

specified using necessary steel form work with M.S. Channels

including forming construction & contraction joints 4 mm to 6mm

wide by cutting the floor up to ¼ th depth of thickness of the

concrete depth using mechanical saw and sealing the joint with poly

sulphide sealant up to full depth of cutting including providing &

fixing M.S. dowels bars with bitumen painted of full length as shown

in drawing as to form the bays not exceeding 6.0 m X 4.5 m etc. Seven Thousand One

80 complete as per directed by Architect or Engineer-In-Charge. For all Cmt 19.50 7,117.82 Hundred Seventeen Rupees

level and leads.(a) For RCC Road Note: Rates are Incl. cost of Cement Eighty Two Paise

Concrete Pavement shall be 150mm. Thk. or as detailed and rolling

2 times as per mentioned above and also all tools tolerance,

shuttering, channel, etc. complete as per detailed & Directed by

Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C.

SWR type B pipe confirming to IS 13592-1992 with one end plain &

other end socket with rubbering & Fixing conforming to ISI 14735-

1999 of approved make for drain system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

wall using PVC clamps of the size 160mm dia x 210mm length x

196mm high at every 2000mm centre to centre or shall be Eight Hundred Seventy Six

81 concealed in wall as directed necessary fittings such as bends, Rmt. 57.50

Rupees Eleven Paise

shoes, etc. incl. testing of pipe & joint & jointed with adhesive

solvent, cement incl. cost of all material etc. complete as per

detailed, directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply &

RPM as per IS 9079 at departmental stores with following MOC: Twenty Four Thousand Two

82 Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m Nos 1.00

Hundred Forty Rupees

Control panel- DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter, Six Thousand Nine Hundred

protective relays & control accessories. Twenty Four Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing laying and jointing in true line and level 75mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed as directed Two Hundred Eighty

including necessary fittings etc. including testing of pipe and joints Rupees Twenty Three Paise

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed as directed Seventy Two Rupees Sixty

including necessary fittings etc. including testing of pipe and joints Four Paise

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed as directed Ninety One Rupees Eighty

including necessary fittings etc. including testing of pipe and joints Three Paise

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed as directed One Hundred Forty Eight

including necessary fittings etc. including testing of pipe and joints Rupees Eleven Paise

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concealed as directed One Hundred Ninety Five

including necessary fittings etc. including testing of pipe and joints Rupees Sixty Six Paise

and fixing the same with adhesive solvent, including cost of all

materials.

Providing & Fixing gun metal check or no return full way wheel valve

etc. complete as per the instruction of EIC. (C) 25 mm. Dia Four Hundred Twenty

Rupees Sixty Three Paise

Providing & Fixing gun metal check or no return full way wheel valve

etc. complete as per the instruction of EIC. (E) 40 mm. Dia Six Hundred Sixty Three

Rupees Forty Two Paise

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 15mm dia. Two Hundred Fourteen

Rupees Eighty Paise

Providing and fixing brass screw down stop tap.(B) 20mm dia.

Two Hundred Twenty Three

Rupees Eighty Paise

Providing erecting and fixing double coated ISI water tank of

Three Rupees Ninety Four

93 required capacity each with all necessary fittings and connection etc. Liter 8000.00 3.95

complete on terrace Paise

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of

the following nominal diameter of self cleansing design with C.I Five Hundred Eighty Six

94 screed down or hinged grating including the cost of cutting & Each 14.00

Rupees Fifty Nine Paise

making good the walls, as per detailed, directed & approved by the

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm One Thousand Two

95 size (inside) with standard weight.(i) Square mouth traps. (A) Each 8.00 1,292.19 Hundred Ninety Two

100mm x 100mm size P type. Rupees Nineteen Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Constructing brick masonry chamber for underground C.I.

Inspection chamber & bends with bricks having crushing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm internal dimensions, total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation concrete Two Thousand Nine

96 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished Each 6.00 2,932.93 Hundred Thirty Two Rupees

smooth with a floating coat of neat cement on walls & bed concrete Ninety Two Paise

for (i) Inside dimensions 455mmx 610mm & 450mm deep for single

pipe line. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4

mix ( 1 cement : 2 coarse sand :4 grade stone aggregate 20mm size

) foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick

bats 40 mm size ) inside plaster 15mm thick with CM 1:5 ( 1 cement

: 5 Coarse sand ) finished with a floating coat of neat cement &

making channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand :4

stone aggregate 20mm nominal size ) finished smooth complete

including curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m

Nineteen Thousand Three

deep including R.c.c. cover with frame size 560 mm diameter ( A )

97 with 230mm thick walls of brick masonry using brick having Each 6.00 19,349.63 Hundred Forty Nine Rupees

Sixty Three Paise

crushing strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement :

5 coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter

sewer.. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for

Sewerage including excavation with any strata up to four meter

depth,PCC in Bottom Slab 1:3:6,Brick Work in cement mortar 1:5,

One Hundred Twenty Nine

RCC M200 Slab on Top And bottom, required filling for Tank

Thousand Nine Hundred

98 including making Required line for water inlet, precast RCC M.200 Each 1.00 1,29,989.02

Eighty Nine Rupees Two

Frame & cover etc.as directed by engineer in charge. etc complete,

septic tank as per detailed drawing.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B

pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using

PVC clamps of the size 160mm dia x 210mm length x 196mm high

at every 2000mm centre to centre or shall be concealed in wall as

directed necessary fittings such as bends, shoes, etc. incl. testing of Eight Hundred Thirty Four

pipe & joint & jointed with adhesive solvent, cement incl. cost of all Rupees Thirty Eight Paise

material etc. complete as per detailed, directed & approved by the

consultant / EIC. (A) 160mm dia. etc. complete as per detailed,

directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

100 diameter with collars and butt ends prepared for collar joints Rmt.

Six Hundred Seventy Seven

including testing of joints complete.(D) 300mm Rupees Ninety Paise

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal

clear dimention including the cost of excavation, P.C.C. 1:4:8 and

filling brickbats with dry masonry work, Honeycomb masonary work,

M:20 RCC. SLab incl. form work including FE-500 Reinforcemnt, Thirty Three Thousand Six

101 M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 with finishing Each 1.00 33,637.04 Hundred Thirty Seven

curing etc. complete as directed.. etc. complete as per detailed, Rupees Four Paise

directed & approved by the consultant / EIC.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing & Fixing white colour, Vitreous china, under / Over

Counter wash basin with single hole for pillar type with Cl or MS

brackets painted white including cutting holes, ranking bolts for

Fixing & marking good the same, including Fixing C.P. Brass waste

coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle Trap,

as approved, capstan head C.P. screwed down high pressure with

screw shank & back nuts & rubber plugs, 15mm dia brass stop cock Two Thousand Seven

102 (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of Each 5.00 2,777.65 Hundred Seventy Seven

required Size, & testing the same for leak proof, etc. with all material Rupees Sixty Five Paise

& labours to complete this job in all respected manners, etc.

complete as per detailed & approved by the consultant & directed by

Providing and fixing wash down water closet (European type,Wall

hung W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with

plastic seat and cover for wash down water closer with C.P. brass

Seven Thousand One

103 hinges, C.P. brass toilet paper holder, Jet Spray, Metropole flush Each 4.00 7,001.62

Rupees Sixty Two Paise

valve Incl. Connection and rubber buffers. (A) Vitreous China., etc.

complete as per detailed & approved by the consultant & directed by

Providing and fixing water closet squatting Pan including trap and

foot rest (Indian type W.C. Pan) size 580mm (Earthwork, bed

One Thousand Four

concrete to be measured and paid for separately) (A) Vitreous

104 Each 1.00 1,434.80 Hundred Thirty Four

China.(I) Long pattern = White colour

Rupees Seventy Nine Paise

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc. complete.(A) White earthenware One Thousand Seventy

105 flat back or corner type size 430mm x 260mm x 350mm. Each 3.00 1,074.86 Four Rupees Eighty Six

Providing & Fixing C.P. brass towel rail Approved Make complete

with C.P. Brass brackets fixed to wooden plugs with C.P. Brass

screws,, etc. complete as per detailed, directed & approved by the

consultant / EIC. (B) 600mm x 20 mm size, etc. with all material & Six Hundred Sixteen Rupees

labours to complete this job in all respected manners, etc. complete Forty Two Paise

as per detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet &

Fixing to wooden plugs with C.P. brass screws & washers, etc. with

Eight Hundred Fifty Nine

107 all material & labours to complete this job in all respected manners, Each 5.00 859.41

Rupees Forty Paise

etc. complete as per detailed & approved by the consultant &

directed by EIC.

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush tank,

seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges,

M.S. / C.I. painted brackets, Waste Coupling, 32mm size bottle trap

etc. all Internal fittings complete with grab rails, swin type grab bar

etc. rubber buffers, C.P nuts, bolts etc making holes in walls &

floors, & finishing for ready to use. The rate includes all necessary

connection charges as per product detail to the satisfaction of Forty Thousand Four

108 Architect / engr. in-charge where required & the final handing over Each 1.00 40,425.96 Hundred Twenty Five

etc. complete as per specifications, drawings & as directed by the Rupees Ninety Five Paise

Engineer-in-charge. The scope includes Providing and fixing all the

necessary fittings of approved brand and as per directed by

Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws,

Three Hundred Eight

109 shanks & back nuts. (i) 15mm dia. Each 4.00

Rupees Seventy Two Paise

Providing & Fixing brass screw down stop tap. (A) 15mm dia. Two Hundred Five Rupees

Eighty Two Paise

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. Two Thousand Three

111 brackets, painted white including cutting holes in walls and making Each 0.00 2,326.66 Hundred Twenty Six Rupees

good the same but excluding fittings. Sixty Five Paise

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling

Seven Hundred Seven

112 Piping Work as Per Directed By Engineer In Charge Each 10.00 707.00

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe

etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded One Thousand One

113 stone aggregate 20 mm nominal size), including finishing complete Each 20.00 1,161.50 Hundred Sixty One Rupees

so as to make it leak proof. Fifty Paise

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with Four Hundred Eighty Five

114 textured/metallic front plate modules erected on / in wall / ceiling Pt. 53.00

Rupees Eighty One Paise

as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling, complete

with earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC box covered with 3 mm

thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as One Hundred Sixty Seven

directed. Rupees Sixty Six Paise

Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate Six Hundred Seventy Four

modules erected on / in wall / ceiling as per pipe erected. with Rupees Sixty Eight Paise

necessary ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per Five Hundred Ten Rupees

117 pipe erected with following type of accessories. Pt. 40.00

Five Paise

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per Seven Hundred Forty Five

118 pipe erected with following type of accessories. Pt. 4.00

Rupees Thirty Eight Paise

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per Nine Hundred Fifteen

119 pipe erected with following type of accessories. Pt. 6.00

Rupees Six Paise

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on /

in wall / ceiling with following type accessories. Two Hundred Fifty Seven

Single mounting base-frame & Textured / Metallic front plates. Rupees Fifty Five Paise

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling ,complete

with 6A Modular type switches and following type of accessories

erected on PVC / Metallic box, single mounting base frame covered

with textured / metallic front plate modules erected on / in wall / Six Hundred Three Rupees

121 ceiling as per pipe erected. with necessary batten/angle holder or Pt. 6.00

Ninety Eight Paise

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with

textured / metallic front plate , modules erected with necessary Twenty Five Rupees Twenty

122 connection. As desired by Engineer In charge Ea. 20.00

Five Paise

(7) Blank Plate Single Cat-III

Decorative call bell Ting-tong box type 250 volts complete erected

Seventy One Rupees

Seventy One Paise

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with One Hundred Sixty Rupees

124 necessary connections as per site situation directed by Engineer In Ea. 11.00

Fifty Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

125 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr.

Thirty Three Rupees Thirty

solution & Clamps with following dia of pipes, in approved manner Three Paise

as directed b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

126 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr.

Sixty Seven Rupees Sixty

solution & Clamps with following dia of pipes, in approved manner Seven Paise

as directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required

nos. of coupling, PVC bushes, Check-nuts etc. complete of following Twenty One Rupees Twenty

sizes. (2) 25 mm One Paise

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free & Two Hundred Seventy

128 flame proof confirming BS .All necessary accessories and measuring Mtr. 70.00 277.75 Seven Rupees Seventy Five

of following sizes. (1) 75 mm x 50 mm trunking Paise

(A) Supplying and laying UPVC cable trunking system comprising

unplasticised polyvinyl, chloride rigid material with ignition free &

129 flame proof confirming BS .All necessary accessories and measuring Mtr.

One Hundred Eighty Eight

of following sizes. (3) 50 mm x 50 mm trunking Rupees Eighty Seven Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for Sixty Two Rupees Sixty Two

130 earth continuity of following size (general wiring + in street light) Mtr. 600.00

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

Eighty Two Rupees Eighty

131 earth continuity of following size (general wiring + in street light) Mtr. 1200.00

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of One Hundred Twelve

following size (FRLS) (a) with medium class Rigid PVC pipe and Rupees Eleven Paise

accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

133 necessary clamps or in existing trench / pipe of following size of Mtr.

Two Hundred Eighty Four

cables Rupees Eighty Two Paise

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

134 necessary clamps or in existing trench / pipe at road crossing or Mtr.

Two Hundred Eighty Seven

floor of following size of cable. (B) 3 core 4 Sq. mm Rupees Eighty Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

135 wall with necessary clamps or in existing trench / pipe at road Mtr.

Three Hundred Sixty Four

crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Rupees Sixty One Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

136 wall with necessary clamps or in existing trench / pipe at road Mtr.

Five Hundred Ten Rupees

crossing or floor of following size of cables. (C) 4 core 6 Sq. mm Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

137 necessary clamps or in existing trench / pipe at road crossing or Mtr.

Six Hundred Seventy Six

floor of following size of cables. (A) 4 core 10 Sq. mm Rupees Seventy Paise

Supplying and erecting Flexible PVC insulated multi strand multi

core 1.1 kv grade ISI marked copper wires of following size to be Forty Six Rupees Forty Six

138 erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed Mtr. 250.00

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

139 going tails, insulating tape etc for following size of cables.

Thirty Three Rupees Thirty

(A) 2 to 4 core 2.5 / 4 Sq. mm Three Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

140 going tails, insulating tape etc for following size of cables.

Thirty Eight Rupees Thirty

(B) 2 to 4 core 6 Sq. mm Eight Paise

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

141 going tails, insulating tape etc for following size of cables.

Thirty Eight Rupees Thirty

(C) 2 to 4 core 10 Sq. mm Eight Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

142 armoured cable complete with out going tails, insulating tape etc for

Seventy Five Rupees

following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Seventy Five Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

143 connected to switchgear terminals with brass/cadmium plated nut

Fifteen Rupees Fifteen

bolts in an approved manner. (C) 16/25 Sq.mm. Paise

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

144 connected to switchgear terminals with brass/cadmium plated nut

Twenty Rupees Twenty

bolts in an approved manner. (D) 35/50 Sq.mm. Paise

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

145 connected to switchgear terminals with brass/cadmium plated nut Ea. 160.00 8.08 Eight Rupees Eight Paise

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

146 connected to switchgear terminals with brass/cadmium plated nut Ea. 8.00 10.10 Ten Rupees Ten Paise

bolts in an approved manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying

cable or locating the fault all over the run and backfilling the same Fifty Five Rupees Fifty Five

147 and making the surface as normal ground. Mtr. 200.00

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for

laying of cable. below ground / road surface for enclosing cable Sixty Two Rupees Sixty Two

and back filling the same to make ground as per original. (A)50 mm Paise

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for

laying of cable. below ground / road surface for enclosing cable Ninety Five Rupees Ninety

and back filling the same to make ground as per original. (C)90 mm Five Paise

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

Six Thousand One Hundred

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

150 Ea. 1.00 6,173.12 Seventy Three Rupees

with all internal connections, spreader tinned copper & complete

Twelve Paise

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking One Hundred Twelve

151 capacity 10 KA to be erected in existing box. confirming to IS Ea. 93.00

Rupees Eleven Paise

8828/1996 with ISI Mark - Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Six Hundred Sixty Eight

152 in existing box having following capacity (b)40 Amp. Cat.III Ea. 4.00

Rupees Sixty Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Five Hundred Eighty Seven

153 in existing box having following capacity (a) 6 to 32 Amp. Ea. 2.00

Rupees Eighty Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 Six Hundred Forty Seven

154 in existing box having following capacity (b)40 Amp. Ea. 7.00

Rupees Forty One Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be One Thousand One

155 used of same company of MCB to be used) suitable for (A) single Ea. 2.00 1,152.41 Hundred Fifty Two Rupees

phase incoming and horizontal single phase outgoing (b) sheet steel Forty One Paise

double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

Two Thousand Nine

used of same company of MCB to be used) suitable for (B) three

156 phase incoming and single phase horizontal type outgoing Per Ea. 4.00 2,913.85 Hundred Thirteen Rupees

Eighty Five Paise

phase isolation type (PPI) (b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar, isolated neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54

Eighteen Thousand Six

suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three

157 phase outgoing as per following .(The DBs should be used of same Ea. 1.00 18,663.60 Hundred Sixty Three

Rupees Fifty Nine Paise

company of MCB to be used)

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all One Thousand Nine

158 advance feature & do not incorporate any electronic component. for Ea. 10.00 1,969.50 Hundred Sixty Nine Rupees

following Max. rating erected as directed (i) 25 Amps.DP Cat. III Fifty Paise

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off street

lights on time scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with hinged doors and Twelve Thousand Three

locking arrangement consisting of suitable size of 4 Pole MCB and 4 Hundred Ninety Nine

159 pole contactor (cat-III)with analog time switch, auto manual switch Ea. 1.00

Rupees Seventy Seven

of same make and suitable input and output Bakelite terminals and Paise

with door earthing approved by Engineer in charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all Two Thousand Two

160 advance feature & do not incorporate any electronic component. for Ea. 6.00 2,235.13 Hundred Thirty Five Rupees

following Max. rating erected as directed (ii) 40Amps. DP Cat. III Thirteen Paise

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

Two Hundred Ninety Five

161 LED driver efficiency > 85 % Nos. 10.00

Rupees Ninety Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % Two Hundred Twenty

162 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 11.00

Rupees Eighteen Paise

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % Four Hundred Twenty

163 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 29.00 427.23 Seven Rupees Twenty

description have shown ranges of Wattage capacity of LED Three Paise

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (ii) 11 watts, Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % Seven Hundred Fifty Eight

164 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below Nos. 87.00

Rupees Fifty One Paise

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (A) Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 24 watts, Surge-2 KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required Two Thousand Two

165 LM-79 & LM-80 certificates)(NOTE: Below description have shown Nos. 10.00 2,201.80 Hundred One Rupees

ranges of Wattage capacity of LED fittings.The Engineer incharge Eighty Paise

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection. (iii) 36 watts

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and erecting PVC body surface or pendent mounting LED

Bulk type 9 watt Lighting Fitting with electronic driver. And lumen

output from luminaire 720lm , input voltage range 90-300VAC , Seven Hundred Eighty

166 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to Nos. 5.00

Seven Rupees Eighty Paise

+60degC working temperature, AL frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm

O.D 4 mtr. Long duly painted with two coats of aluminium paint

Three Thousand Two

complete with metallic base plate of 300 mm x 300 mm x 4mm

167 Nos. 10.00 3,225.94 Hundred Twenty Five

thick for using as a compound light pole with approx. weight 32 Kg.

Rupees Ninety Four Paise

Providing and erecting street light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm / 80mm. / require size pole top having sufficient fasteners

for fixing the brackets and having spread of 1 mtr. length with

suitable rise as per site condition & suitable welded stiffener reducer Five Hundred Sixty One

168 and nipple with check nut complete painted with one coat of Red Nos. 10.00

Rupees Fifty Six Paise

oxide / PU base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting

junction box compression moulded from SMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in /

loop out in built terminal suitable for four core cable, waterproof of Six Hundred Sixteen Rupees

I.P. 54 protected with clamp or bolt nut & earth bolt of following Ten Paise

size. (B) 250mm x 194mm x 99 mm

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm Eight Hundred Nine Rupees

170 dia x 45 cm) high upper ground level with necessary curing and Nos. 10.00

and One Cent

finishing in approved manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge) including Supplying and Two Thousand Fifty Six

171 erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down Nos. 33.00

Rupees Thirty Six Paise

rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

172 through a 16 Gauge M.S. box / Heavy Duty PVC box complete Nos.

One Hundred Eight Rupees

erected concealed in Ceiling with necessary finishing. Seven Paise

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Eighteen Rupees Eighteen

173 or Fan box. Nos. 33.00 18.18

Supplying & erecting approved make low noise decorative exhaust One Thousand Three

174 fan having square frame ABS body with inbuilt lowers & square Nos. 9.00 1,366.53 Hundred Sixty Six Rupees

frame. 250mm with 1350 RPM Cat.II Fifty Three Paise

Providing and erecting required size HOT dipped Galvanised iron

strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Seventy Seven Rupees

175 Motors etc. using proper clamp. Kg. 100.00

Seventy Seven Paise

Providing and erecting required size Copper strip for earthing of

Seven Hundred Ninety Four

176 H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using Kg. 50.00 794.87

copper clamp. Rupees Eighty Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 Seventy Seven Rupees

177 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 50.00

Seventy Seven Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC Seven Thousand Ninety

178 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar Ea. 2.00 7,095.25 Five Rupees Twenty Five

content:- <2%(C) Back fill Compound :- Earthing compound should Paise

be capable to retain moisture for long time Necessary test report

must be submitted by Agency. [B] For Electrical installation up to

KV located in other than normal soil i.e. Soft Rock, Marshy Soil

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar Ten Thousand Five Hundred

179 content:- <2%(C) Back fill Compound :- Earthing compound should Ea. 2.00 10,593.89 Ninety Three Rupees Eighty

be capable to retain moisture for long time Necessary test report Nine Paise

must be submitted by Agency. [C] For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA)i.e.

independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in

Forty Seven Rupees Forty

180 existing pipe as per direction. [C] CAT - 6 RMT 1190.00

Seven Paise

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

with battery, over/under voltage output with over load & short Eighty Two Thousand Nine

181 circuit protection equipment. The system housed in CRC sheet duly Nos. 1.00 82,941.20 Hundred Forty One Rupees

powder coated paint with following power backup.with MS painted Twenty Paise

batteries stand, 10% Overload capacity for momentary load. (C)

KVA with 1Hr Backup

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed

Forty Nine Thousand Five

compressor, fan motor, condensing unit, water tank surrounded by

182 evaporating coil, thermostats, relay etc. complete with necessary Ea. 1.00 49,559.69 Hundred Fifty Nine Rupees

Sixty Nine Paise

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type Twenty Nine Thousand One

183 post carbon filter auto low & high pressure switches with following Ea. 1.00 29,187.99 Hundred Eighty Seven

size of storage tank & LPH capacity & erected as directed [C] 50 Ltr Rupees Ninety Nine Paise

/ Hr with 150 psi 2 nos booster pump

Providing Water proof straight Joint in PVC insulated flat flexible

copper cable by using insulating material, water proofing material, & One Hundred Eighty Nine

184 making the joint complete. (A) Up to 10Sq. mm Ea. 10.00

Rupees Eighty Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image

Sensor (0.8758 centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

(2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H,

Four Thousand One

H.264B, MJPEG Support Triple stream WDR (120dB), Day/Night(ICR),

185 3D NR, AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Nos 13.00 4,156.15 Hundred Fifty Six Rupees

Fifteen Paise

Support Built-in Mic IR Range of 30 Mtr., IP67, PoE complete with

rj45 connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image

Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/

(2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H,

H.264B, MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), Eight Thousand Eighty

186 3D NR, AWB, AGC, BLC, HLC, Digital watermarking3.6mm fixed Lens Nos 6.00

Support Built-in Mic IR Range of 50 Mtr., IP67, PoE complete with

rj45 connector crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP

PLUS MAKE - 32 Ch. 4K Network Video Recorder AS PER

SPECIFICATIONS : Up to 32 channel IP camera input Max. decoding

capability: 8 × 1080p@30 fps, 2 × 8 MP@30 fps Smart

Instastream/H.265/H.264 /MJPEG Max. 160/128/60 Mbps

incoming/recording/outgoing bandwidth Support 2 SATA HDDs up Eighteen Thousand One

187 to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA Nos 1.00 18,180.00

Hundred Eighty Rupees

simultaneous video output Support Multi-brand network cameras

ONVIF Version 2.4 conformance Mobile Software: iCMOB, gCMOB

CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance

Thirteen Thousand Three

188 Nos 1.00 13,352.20 Hundred Fifty Two Rupees

Twenty Paise

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit

SFP slots.

PoE power budget is up to 250 W, making it ideal for small to

medium business surveillance systems. Port Priority is able to

guarantee the quality of sensitive application like video monitor. PoE

189 Auto Recovery automatically reboots your dropped or unresponsive

Fifteen Thousand One

PoE-powered devices. Hundred Fifty Rupees

Intelligent power management protects the switch from overload.

QoS ensures smooth traffic for latency sensitive applications. IGMP

Snooping optimizes multimedia traffic delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to

Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Three Thousand Thirty

190 Wi-Fi, VPN - TP-Link Archer C50 AC1200 or equivalent Nos 2.00

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Twenty Three Thousand

191 Nos 1.00 23,482.50 Four Hundred Eighty Two

Rupees Fifty Paise

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets,

Nine Thousand Five

mounting trays, exhaust fan complete with accessoreis - 600 X

192 Nos 1.00 9,595.00 Hundred Ninety Five

600MM approx. size -- Elirix make

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker

input Power:8 Watt RMS Power Taps:8/4/2W on 100 V Two Thousand Two

193 Freq.Responce:60-15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X Nos 20.00 2,222.00 Hundred Twenty Two

H77mm/0.78kg, Model no.CS-6081T Rupees

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having

following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux.,

frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost Twenty Two Thousand

194 type, LED Meter : 5 LED Arrays, The amplifier suitable to operate Nos 1.00 22,725.00 Seven Hundred Twenty Five

240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC Rupees

to Battery operation, duly protected by wrong Battery Polarity

connections.

Supplying & erecting Mixing Console having channels, Audio mixer

with. Echo facility for live performance, Auditorium & stadiums,

having following features & facilities. (a)input Channels :- Each

channel has separate

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum

level for minimum noise (c)BASS, MID & TREBLE ‘ controls Separately

for each input channel (d)ECHO control for each channel (e)PAN

control for echo channel for left or right output (f) AUX Control : To

control , level of the channel in final mix to AUX sound output

(g)Channel ON/OFF switch (h)ECHO Section :- ECHO, reverb &

Chorus effect can be added to all input channel by different setting

of Delay, Reverb & Level control (i)Tape section (j)Aux. send & return

For sending Pre-feeder output of channel for monitoring or adding a

special effect unit (k)Mono / Stereo output controls (m) Head phone

output for monitoring purpose.

Technical specification:

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Thirty Eight Thousand Six

195 Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Nos 2.00 38,632.50 Hundred Thirty Two Rupees

Balance/42 dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms Fifty Paise

unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R

Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at

100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line

Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM / +17 dBM

(775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB,

0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh

taps / impedance having frequency response 150-20000 Hz with

following specifications (b) With 2 speakers having power handling

196 capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance Nos 2.00 5,050.00 Five Thousand Fifty Rupees

of respectively 670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather &

Dust resistant ceiling/ wall mounted sound speaker with decorative

case & mesh grille with foam layer under grill, rotary- switch for

20000 Hz with following specifications (b) With 2 speakers having Seven Thousand Five

197 power handling capacity of 23W(MAX) & 15 W (RMS), each speaker Nos 4.00 7,575.00 Hundred Seventy Five

have impedance of respectively 670 ohms/ 15W, 1 K.ohms/ 10W, Rupees

2K.ohms / 5W & 4 K. ohms / 2.5W

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-

605, GMB-6C or equivalent in Bosch /Shure etc. Eleven Thousand One

Hundred Ten Rupees

SPEAKER WIRE

Eighty Five Rupees Eighty

Five Paise

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for ( cost Fifty Six Thousand Three

200 includes Eco Friendly green gas charging and 15A plug top & Remote Each 8.00 56,353.96 Hundred Fifty Three Rupees

Control & MS Stand) with necessary core cutting. (1)For ISEER Range Ninety Six Paise

(KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power

connection charges and inspector approval for power(to be paid to Fifty Thousand Five

201 concern electrical power supplier company) Lot 1.00

Hundred Rupees

Conventional type Smoke detector having following specifications :

Dual LED’s for 360 visibility. Advanced detection and communication

protocol. Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54

Standard. Operating Voltage : 10 ~ 28V DC. O O Operating

Temperature : 0 C to 37.8 C. Relative Humidity : 10% to 90%

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start One Thousand One

202 Up Time : 30 Seconds. Nos 18.00 1,146.35 Hundred Forty Six Rupees

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Thirty Five Paise

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

0.16 dB/m. Thermal Rating : 57 C(135 F). complete with Junction

box RAVEL make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications :

CE Approved. 16 X 2 Dot Matrix LCD Display. Standby battery

backup with built in charging. Switch Mode Power Supply. Tactile

eypad for easy panel operation. System ON indication. Low Battery

visual warning with audible ton. Fire / Fault status in unambiguous

colored LED indication. 2 programmable relays for fire,supervisory

and fault. All zones accept smoke detectors and any normally open

contact device. Any Zone can be configured as alarm or supervisory.

Zone wise isolation and one man walk test facility. Programmable

Aux Outputs. Lamp test & Drill test facility. 100 All Events log with

Nine Thousand Five

RTC. Date / Time / Password configuration. Programmable auto

203 Nos 1.00 9,595.00 Hundred Ninety Five

silence facility. Zone wise sounder / contact optional). TCP-IP / GSM

facility (optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz, 50W

Operating Temperature 0 – 49° C / 32 – 120° F. Storage Temperature

0 – 60° C Relative Humidity 93 ± 2% RH (non-condensing) at 32 ± 2°

C / 90 ± 3° F Charging voltage Charging current 28 V ± 5% 350mA

(max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo

Electric Type Tone Type : Fire Engine Siren Material : ABS Plastic

Nine Hundred Forty Nine

204 Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box Nos 3.00 949.40

: 95 H mm X 75 L mm X 58 D mm Mounting Type : Surface / Flush Rupees Forty Paise

Mount complete with Back Box - RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating

Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow /

205 Red Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - Nos 3.00 808.00 Eight Hundred Eight Rupees

RAVEL make Cat no. RE716 MR

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supplying, Installation, Testing and commissioning of Jockey Pump

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with

M.S.fabricated common base plate, coupling, coupling guard, One Hundred Nineteen

206 foundation bolts etc. for motor and details pump specificaion follow No. 1.00 1,19,041.95 Thousand Forty One

as per specification as mentioned in tender volume.. Rupees Ninety Four Paise

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump.

suitable for automatic operation and consisting of following:

complete in all respect as required. With Suitable HP, SQ cage Two Hundred Fifty Two

207 induction motor TEFC type suitable for operation on 415 volts, 3 Set 1.00 2,52,399.00 Thousand Three Hundred

phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot Ninety Nine Rupees

mounted type with class 'F' insulation, conforming to IS:

Diesel Operated pump 70m head, 2900 RMP with day tank & battery Five Hundred Fifty Five

208 set complete with 100 ltr diesel SEt 1.00 5,55,002.07 Thousand Two Rupees

Seven Paise

Control Panel for the operation of Jockey pump, Fire pump Electric Ninety Four Thousand Nine

209 and Fire pump Diesel with automation SEt 1.00 94,990.50 Hundred Ninety Rupees

Fifty Paise

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole

single throw type suitable for 3 phase supply with diaphragm. Two Thousand Four

210 Aluminum Enclosure with IP 66 protection follow as per specification Nos. 3.00 2,400.47 Hundred Rupees Forty Six

as mentioned in tender volume.. Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification Ten Thousand Ninety

as mentioned in tender volume.. Rupees Ninety Four Paise

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly

valve conforming to I.S:13095 class PN 16 rating with Fittings, Six Thousand One Hundred

212 Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification Nos. 2.00 6,107.98 Seven Rupees Ninety Eight

as mentioned in tender volume.. Paise

of size: 100mm dia.

Supplying, Installation, Testing and commissioning of C.I.Ball type

Foot valve conforming to I.S:13095 class PN 16rating with Fittings,

Eighteen Thousand Five

Flanges, Nutbolts, Washers, Gaskets etc. follow as per specification

213 as mentioned in tender volume.. Nos. 2.00 18,533.30 Hundred Thirty Three

Rupees Twenty Nine Paise

of size: 150mm dia.

Providing, fixing, testing and commissioning of C.I. Dual plate type

Non-Return Valve class PN 16 rating with fittings, flanges, nutbolts, Eleven Thousand Forty One

214 washers, gaskets etc.of sizes: 150mm dia Nos. 2.00

Rupees Nineteen Paise

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

Two Thousand Three

tees, elbows, reducers, clamps, hangers etc. with painting of one

215 coat of primer and 2 or more coats of synthetic enamel paint of Meter 35.00 2,391.95 Hundred Ninety One

Rupees Ninety Four Paise

approved make / shade complete as per specification. 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

One Thousand Seven

tees, elbows, reducers, clamps, hangers etc. with painting of one

216 coat of primer and 2 or more coats of synthetic enamel paint of Meter 15.00 1,744.20 Hundred Forty Four Rupees

Nineteen Paise

approved make / shade complete as per specification. 100mm dia.

Providing, fixing, testing and commissioning of Under Ground M.S.

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) with IWL/pypecoat,

Three Thousand Two

4mm thickness wrapping and coating and providing all fittings like

217 Meter 10.00 3,265.73 Hundred Sixty Five Rupees

flanges, tees, elbow, fasteners with all follow as per specification as

Seventy Three Paise

mentioned in tender volume.. 150mm dia

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

clamps & plug etc.with welding,threading,jointing. And Excluding Three Hundred Sixty Three

218 cutting holes in wall Mtr 80.00

Rupees Fifty Six Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

clamps & plug etc.with welding,threading,jointing. And Excluding Four Hundred Fifty Nine

219 cutting holes in wall Mtr 40.00

Rupees Fifty Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

clamps & plug etc.with welding,threading,jointing. And Excluding Five Hundred Seventy Five

220 cutting holes in wall Mtr 25.00

Rupees Sixty Four Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

Seven Hundred Ninety

clamps & plug etc.with welding,threading,jointing. And Excluding

221 cutting holes in wall Mtr 15.00 797.82 Seven Rupees Eighty Two

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

clamps & plug etc.with welding,threading,jointing. And Excluding Nine Hundred Forty Nine

222 cutting holes in wall Mtr 15.00

Rupees Thirty Paise

/slab and making good of the same. The pipe & fittings shall have

One coat of primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239

complete with all fittings (butt welded) such as elbow, socket, tees,

unions, flanges with hot deep galvanized nut & bolt , reducer,

clamps & plug etc.with welding,threading,jointing. And Excluding One Thousand Two

223 cutting holes in wall Mtr 30.00 1,201.78 Hundred One Rupees

/slab and making good of the same. The pipe & fittings shall have Seventy Seven Paise

One coat of primer and two coats of fire red / PO red 80 mm dia.

Providing fixing testing and commissioning of GUN METAL 15 mm

size quartzoid bulb type sprinklers, set to operate at 57 degree

Three Hundred Ninety Nine

224 Centigrade. Pendent type type with required accessories complete. Nos. 85.00

Rupees Ninety Six Paise

(GUN METAL)

Supplying , installation, Testing & commsioning of Flexible Drop One Thousand Five

225 1000mm Nos. 40.00 1,514.85 Hundred Fourteen Rupees

Eighty Four Paise

Providing, fixing, testing and commissioning of RRL Fire delivery

hose 63 mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’

Fitted with Stainless Steel male & female coupling ISI Mark IS :903 Six Thousand Five Hundred

226 duly binned with copper wire winding follow as per specification as Nos. 4.00 6,502.28 Two Rupees Twenty Seven

mentioned in tender volume.. Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supply installation ,Testing & commissioning of single headed

oblique pattern ISI hydrant landing valve with 80 mm dia flanged

inlet & 63 mm dia instantaneous type female outlet complete with Seven Thousand Six

227 PVC cap and chain, twist release type lugs WITH all accessories as Nos. 2.00 7,650.75 Hundred Fifty Rupees

per SI Standard Conforming to IS-5290. (SS 304- Body SS-304 Seventy Five Paise

Providing, fixing, testing and commissioning of weatherproof

standard fire Hose Cabinet wall mounting type 18 Gauge. (750 x

600 x 250) having Double Opening with M.S. fabricated stand, Six Thousand One Hundred

228 necessary lock & key arrangement follow as per specification as Nos. 2.00 6,189.79 Eighty Nine Rupees Seventy

mentioned in tender volume.. Eight Paise

Supply installation ,Testing & commissioning of SS Fire Brigade

connection consisting of 2WAY. 63 mm instantaneous type male Seven Thousand Six

229 coupling with 125 mm Dia. flanged outlet complete for fire water No. 1.00 7,650.75 Hundred Fifty Rupees

tank. Seventy Five Paise

Supply installation ,Testing & commissioning of SS Fire Brigade

connection consisting of 4WAY. 63 mm instantaneous type male Eleven Thousand Seven

230 coupling with 125 mm Dia. flanged outlet complete for fire water No. 1.00 11,731.15 Hundred Thirty One Rupees

tank. Fifteen Paise

Providing, fixing, testing and commissioning of Wall mounting Fix

type First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS :

Ten Thousand Eight

444 Type II fitted wit SS Shutt off Nozzle follow as per specification

231 Nos. 2.00 10,877.20 Hundred Seventy Seven

as mentioned in tender volume..

Rupees Nineteen Paise

Supply installation , testing & commissioning of ISI Standard SS-304

branch pipe with nozzle of 20mm nominal bore outlet as per IS:903 Four Thousand One

232 suitable to fit with standard instanteneous type 63mm dia coupling Nos. 2.00 4,182.41 Hundred Eighty Two

(SS-304) Rupees Forty One Paise

Supply installation testing & Commissioning of 25 MM dia Air

Two Thousand Two

Realese valve complete in all respects. (GUN METAL)

233 Nos. 2.00 2,294.72 Hundred Ninety Four

Rupees Seventy Two Paise

Supply installation testing & Commissioning of Pressure guage 4"

Two Thousand Three

dial 0 to 16 kg/cm2 with syphon and cock complete in all respects

234 Nos. 2.00 2,397.24 Hundred Ninety Seven

Rupees Twenty Three Paise

Supply installation testing & Commissioning of 25 MM dia Ball Valve

(SS-304) complete with SS Ball with single handed lever complete in Nine Hundred Sixty Nine

all respects. Rupees Nine Paise

Providing & Installation of ABC Stored Pressure Type Fire

Extinguisher 6 Kgs. capacity bearing ISI Mark for Fighting ABC Class

Two Thousand Three

of Fire. The Extinguisher will be Manufactured Strictly as per BIS:

236 Nos. 5.00 2,355.72 Hundred Fifty Five Rupees

15683:2006 bearing ISI. Mark follow as per specification as

Seventy Two Paise

mentioned in tender volume..

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity,

made from the brand new seamless cylinder, as per IS: 7285 and

CCE approval, fitted with a Discharge hose and horn and wheel type Five Thousand Four

237 valve with initial Charge as per IS: 15683:2006 specification, bearing Nos. 5.00 5,456.63 Hundred Fifty Six Rupees

ISI Mark follow as per specification as mentioned in tender volume.. Sixty Two Paise

Providing & fixing Modular type ABC Dry Powder Fire extinguishers

5 litre capacity Fire Extinguishers. The Extinguisher will be Four Thousand Four

238 Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark Nos. 5.00 4,447.03 Hundred Forty Seven

follow as per specification as mentioned in tender volume.. Rupees Three Paise

Providing, fixing, testing and commissioning of On -Off Switch

follow as per specification as mentioned in tender volume.. Four Hundred Eight Rupees

Sixty Four Paise

Providing, fixing, testing and commissioning of below Auto Glow

Signages follow as per specification as mentioned in tender volume.. Two Hundred Thirty Three

Emergency Exit 4” X 12” Rupees Sixteen Paise

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority

Thirty Thousand Three

241 with all other charges and documentations for getting No Objection Job. 1.00

Hundred Rupees

Certificate.(as per GMB Approved rate)

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

12 mm thick marina plywood IS 710 grade both side on aluminum

framing of gauge 16. Aluminum framing size for vertical &

horizontal support is 50 mm x 25 mm. Grid of aluminum framing is

600 mm x 600 mm. All exposed surfaces finished with 1 mm

thick Laminate of approved shade complete with mat finish.

Necessary framing to be erected above false ceiling. No extra cost to

be paid for the same. Before installation, make hole/face plate for

conduit pipes of electrical / networking cables with open able stud

from partition Including all materials and labor etc. Make necessary

grooves as per shown in drawing. Using of 12 mm thick clear glass Six Thousand Six Hundred

242 with proper crystal edges & with suggested frosted films on glass. Sqm 4.00 6,620.55 Twenty Rupees Fifty Five

All joints are covered with teakwood beading Patti finished with Paise

polish matching with laminate. Including door of same design if

required Complete with all necessary hardware & adhesives as per

details given in drawing and as per instructions of

Architect/consultant/Engineer In charge. Contractor has to provide

all necessary cut outs (race ways.) for Electrical works & no extra

payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% noncombustible

as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved texture

Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm

to be laid on true horizontal level suspended inter locking metal grid

of hot dipped galvanized steel sections (galvanizing @120 grams per

sqm at joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and centre to centre to form agrid of 1200X600mm and secondary One Thousand Six Hundred

243 thick (Minimum) sheet to be interlocked at middle of the Sqm 66.00 1,674.15 Seventy Four Rupees

1200X600mm panel to form grid of size 600X600mm resting on Fourteen Paise

periphery walls/partitions on a perimeter wall angle pre-coated steel

of size (24X24X3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top,

with MS Pipe Structure of Frame as per Architect/ Engineer Design or

table is also made up of 19mm Thick. Top of Table is 19mm thk ply

with laminate Finish Per Requirement and All internal & external

Joints finished with teakwood beading Patti. Common or front Part of

Table is Sectationized with MS Perforated Sheet. All exposed and

internal surfaces covered with Laminate Finish of approved shade &

Twenty Four Thousand

Complete as per detail drawings & as instructed by

244 Architect/consultant/ Engineer In charge. Complete with all Sqm 42.00 24,870.53 Eight Hundred Seventy

Rupees Fifty Three Paise

necessary hardware like nails, ss screws, table chain, Key board trey,

TDS channel, adhesives etc. Contractor has to provide all necessary

cut outs for Electrical works & no extra payment shall be made for it.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing & fixing office table / staff table having ht of 750 mm

Top, with 19mm thk plywood or MS pipe Structure as per

table is also made up of 19mm Thick. Top of Table is 19mm thk ply

with laminate Finish Per Requirement and All internal & external

Joints finished with teakwood beading Patti. Item includes fixing of

drawers and keyboard tray and storage with shutters under table as

per drawing. With grooves shown as per drawing. All exposed and

Twenty Nine Thousand

internal surfaces covered with Laminate Finish of approved shade &

245 Complete as per detail drawings & as instructed by Sqm 8.00 29,350.96 Three Hundred Fifty

Rupees Ninety Five Paise

Architect/consultant/ Engineer In charge. Complete with all

necessary hardware like nails, ss screws, table chain, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply

should follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of

350mm/450mm/600 mm, having skirting of 75 mm, including

vertical supports & horizontal shelves shown as per drawing made

by 19 mm thick Marin ply, Open Front Side for Selves with using

mm thick Marin ply for framing. All complete with proper teakwood

beading and Teakwood molding as per design. Back ply is 12 mm

Marin ply. All exposed are covered with 1 mm thick Laminate &

Ten Thousand Three

internal surfaces are covered with 1 mm thick laminate. External &

246 internal joints covered with beading Patti complete with polish Sqm 60.00 10,381.62 Hundred Eighty One

Rupees Sixty One Paise

finish. With grooves shown as per drawing. All complete with proper

hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS

etc. All Details as per shown in detail drawings & as per instructions

of architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having

depth of 350mm/450mm/600 mm, having skirting of 75 mm, with

proper locks. includinf of vertical supports & horizontal shelves

shown as per drawing made by 19 mm thick Marin ply, having

shutters of 19 mm thick ply or Clear Glass with using 12 mm thick

Marin ply for framing. All complete with proper teakwood beading.

and Teakwood molding as per design. Back ply is 12 mm Marin ply.

All exposed are covered with 1 mm thick Laminate & internal

surfaces are covered with 1 mm thick laminate. External & internal Thirteen Thousand Eight

247 joints covered with beading Patti complete with Polish finish. With Sqm 41.00 13,815.77 Hundred Fifteen Rupees

grooves shown as per drawing All complete with proper hardware Seventy Six Paise

like locks, S.S. Screws, MS Nails, Magnets, table chains, cable

manager SS 304 Handles of 250 mm and 100 mm dia etc. All

Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Notice Board / Pin Board

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Seven Thousand Two

248 Arrangement complete as per drawing and Directed by Engineer In Nos 4.00 7,259.38 Hundred Fifty Nine Rupees

Charge etc complete. Thirty Seven Paise

Providing and fixing News paper stand size 650 x 820 x 1200 or

required height made out of 18 mm wtr.prf. [MR Grade] ply with

mm. thk inner laminate for top including back panel with shelves for

magazine and news paper as shown in drawing, all expose joints Thirteen Thousand Forty

249 finish with teakwood beadsing patti with polish finish and provision Nos 2.00 13,044.62 Four Rupees Sixty One

of openable top for news paper storage complete as per detailed Paise

drawings and Engineer-In Charge and Architect

Supplying and providing reading chairs with PP arms with soft PU

pads, Seat and back upholstered with cushioned and MS powder

coated frame and cantilever legs. Overall dimension 590 L x 600 W x

915 H (Or as specified) complete as directed by architect and

250 Nos 91.00 6,060.00 Six Thousand Sixty Rupees

product as per given specification. Complete as per architectural

design and concept and approved by Architect & Client.

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Supplying and providing High Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

-Knee tilt mechanism Ten Thousand Seven

251 -360 swivel motion/ 100mm stroke gas Nos 1.00 10,738.07 Hundred Thirty Eight

-Nylon Star base Rupees Six Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per

specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

-100mm class 4 gas lift

Five Thousand Twenty Four

252 -PP Fixed Arm rest Nos 8.00 5,024.65

-Nylon Star base/Twin wheel nylons casters Rupees Sixty Four Paise

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with

paddle. Capacity-10 to 15 Ltr. Five Hundred Fifty Seven

Rupees Fifty Two Paise

Supplying and providing dust bin made of 100% virgin plastic with

paddle. Capacity-120 L One Thousand Five

254 Nos 3.00 1,568.03 Hundred Sixty Eight Rupees

Blinds : Providing and fixing as per approved make manual roller

blinds with Soltis fabric & spring drive system with steel ball

chain/one touch with speed control action roller blind with end

brackets with head ail, components, bottom bar.Color-Alu with

manual operation and warranty etc as per manufacturer’s

specifications. Fabric to be as per approved sample. All the work

complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC

with Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm,

Openness Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar

reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, One Thousand Nine

255 Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing Sqm 115.00 1,962.94 Hundred Sixty Two Rupees

Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Ninety Three Paise

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project

Manager. (The mode of Measurement: The size of the blind will be

measured from end to end bracket (Left to Right bracket) & height

will be measured from top of the pelmet till the bottom of the

bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall,

with proportionately base dimenstion as per approved design by One Hundred Fifty

256 client and complete as per instruction of engineer-in charge and Nos 1.00 1,50,995.00 Thousand Nine Hundred

consultant. Ninety Five Rupees

Providing and fixing Wall art/Photoframes of size 2ftx2ft with

wooden frame of size 2in x 1in consisting 6mm thick ply in back

Two Thousand Four

with digital vinyl printing and 5mm thick glass on top if required.

257 Nos 30.00 2,497.23 Hundred Ninety Seven

Rupees Twenty Two Paise

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution

x 2160 pixels with HDR TypeHDR 10+ complete as per approved One Hundred Two

Rupees Fifty Seven Paise

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb

RAM DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE

STUDENT, Full HD display of 21 to 23.8' with keyboard and mouse. Fifty Nine Thousand Seven

259 Nos 7.00 59,748.35 Hundred Forty Eight Rupees

Thirty Four Paise

Tender Rate

Sr. Qty. May More

Description of Item Unit Total Amount in Rs.

Description of Item Unit Total Amount in Rs.

No. Or Less Rate In Rs. Rate In Words

Providing and fixing Automatic Duplex laser printer with 30 pages

per minute print speed, 8 mb memory, Large 250 sheet paper tray

Fifteen Thousand One

with USB connectivity.

260 Nos 1.00 15,157.58 Hundred Fifty Seven

Rupees Fifty Seven Paise

Supplying and providing xerox machine- -20PPM Copy / Print

/Color Scan / Duplex DADF /Single Fifty Eight Thousand

Tray Seventy Five Rupees

Providing and fixing Directional and Informative Signages- SS Plate,

Grade 304, Brush finish, 2mm Thickness with smoothen corner

Ninety Two Thousand Four

edges, Acid etching with duco color, SS studs 1.5' away from

262 Sqm 1.50 92,433.18 Hundred Thirty Three

wall.fitting as per dirction of Architect and EIC

Rupees Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm

thick letter 1.5" depth 10" Height with Duco color & fitting as per Fifty Two Thousand Five

direction of Architect & EIC.

Hundred Twenty Rupees

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal