ADDN/ALTN TO PART OF MGES FOR SETTING UP GDCC, SPECIAL REPAIRS TO BUILDING AND STRUCTURES DAMAGED DUE TO EARTHQUAKE AND SPECIAL REPAIRS TO ROOF TREATMENT OF CERTAIN BUILDINGS/MD ACCN AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

Disconnecting existing tanks of capacity exceeding 500 Litres but not exceeding 1000 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as directed.

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.

Taking up or down, steel tubing 25 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) ,complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description in parapets including racking out joints, hacking for key, scrubbing down with water etc,dismantling cement concrete floor tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, including brushing neat cement slurry with 3.0 kg of cement per sq. metre and including rendering 10 mm thick, cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) complete all as specified and directed.

Materials and Labour for,Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight),complete all as specified and directed.

Materials and Labour for providing waterproofing treatment over smooth finished surfaces by application of cold applied bituminous primer as per manufacturer's instructions, providing and laying 3.00 mm thick, plain finish, APP modified bitumenous waterproofing and damp proofing membrane with polyester reinforcement (Non-Woven Polyester Mat), conforming to IS 16532 :2017 (Dimensions and weight of APP membrane polyester as per Table 2 of IS), by forced (torch on) application, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction,complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges including demolition of existing cement concrete (un reinforced), complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),including demolition of existing brickwork or stone/boulder masonry (Considering 0.115 Cum per Sq M), built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide,for fair finished surfaces of concrete, flat, complete all as specified and directed.

Materials and Labour for, second-class hard wood timber scantlings, clean sawn, in unframed works and in any position, fixed with nails including dismantling existing timber scantling in unframed work, 40 Sq cm and over in section, in any position,complete all as specified and directed.

Materials and Labour for, second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Materials and Labour for, 20 mm thick, second class hard wood boarding, planned on one side with butt joints, supplied & fixed with nails in any situation (except flooring and skirting), including dismantling of existing timber boarding, any description, fixed in any position with nails,complete all as specified and directed.

Supply and Fix, 35 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed.

Supply and Fix, 35 mm thick,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed.

Supply and Fix, mild steel barrel tower bolt, black Japan finished, with bright bolt 200 mm long, complete all as specified and directed.

Supply and Fix in repairs,mild steel pressed handles,150 mm size, oval type, black Japan finished,complete all as specified and directed.

Supply and Fix in repairs, Mild steel sliding door bolts,length of bolt 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fix, mild steel, 300 mm, ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges,75 mm size,complete all as specified and directed

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work , complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets,complete all as specified and directed.

Materials and Labour for, black hollow steel sections for structural use, conforming to IS 4923:1997(Reaffirmed 2009),designation CF, in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular Hollow Sections) including distance pieces, cleats etc.,complete all as specified and directed.

Materials and Labour for, rolled mild steel plates (plain or chequered),Fe- 290(Gde E-165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment,complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 5 to 10 mm, length of bolt exc. 5 cm and n. exc 10 cm long, complete all as specified and directed.

Supply and fix, carbon steel anchor fastener, 16 mm dia.,100 long, complete all as specified and directed.

Supply and fix, carbon steel anchor fastener, 16 mm dia.,450 long, complete all as specified and directed.

Taking down, aluminium shutters of any description exc. 1.00 Sq. M and n. exc. 2.00 Sq. M each including refixing in the same opening after necessary minor repairs such as alignment of members,tightening of screws in jointing cleats of members, easening of hinges/sliding rails etc.,complete all as specified and directed. Note:- Cost of minor materials such as screws,cleats,rubber packing etc. shall be deemed to be inclusive in the quoted rate.

Supply and Fix,anodised aluminium, window and ventilator frame with anodised aluminium sliding glazed shutters,without sash bars,including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading,locking arrangements,handles,screws etc. with and including 4mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, including dismantling of existing asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed. Notes:- (i) The existing ridge, valley, cladding to wall and gutters etc. sheets are deemed to be dismantled along with the roofing sheets. (ii) Old unserviceable sheets will be sold to the Contractor under relevant item in Schedule of Credit.

Materials and Labour for, 4 mm thick PVC translucent partition boards, superior quality with designer faces on both sides, fixed to existing partition frame with screws and fixing clips, complete all as specified and directed.

Materials and Labour for,anodised aluminium snap grid frame work for false ceiling,size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Materials and Labour for,6 mm thick, 5 Nos. ply, plywood, grade BWR, type BB, fixed with screws to timber frame work in ceiling, flat or sloping, including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for machine cut Kota stone slab 18-20 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick screed bed of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor, complete all as specified and directed.

Materials and Labour for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor, including demolition of existing cement concrete (un reinforced) in ground floors and paving (Considering 0.04 CuM per Sq M), complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding including demolition of existing cement concrete (un reinforced) in ground floors and paving (Considering 0.075 CuM per Sq M), complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement including demolition of existing cement concrete (un reinforced) in ground floors and paving (Considering 0.075 CuM per Sq M),complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,including applying two coats of distemper oil emulsion over a coat of primer,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,and including applying two coats of distemper oil emulsion over a coat of primer,complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:6) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster (G+2 Building) from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster (G+2 Building) from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.including applying two coats of cement-based paint and including priming with alkali resistant priming paint,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for, fixing GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings,stanchions, beams, etc. including all laps,cutting and waste, rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:6) on one side of lathing including rendering 10 mm thick, cement plaster, in cement mortar (1:6) on other side of lathing and finishing surface even and smooth without using extra cement, including applying two coats of cement-based paint and including priming with alkali resistant priming paint on newly plastered surfaces and including demolition of existing reed, lathing, single or double, including battens and plaster or chicken wire lathing,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of cement based paint,on walls, complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying tone coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including dismantling existing water tanks and removing to store, complete all as specified and directed.

Supply and Fix in repairs,ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed,complete all as specified and directed.

Supply and Fixin repairs, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed

Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix in repairs, swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms),complete all as specified and directed.

Supply and Fix, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix in repairs, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs, vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Materials and Labour for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

SHRI D. C. BISWAS

Shri A. K. Goswami

M/S Kangkans

M/S P.C. SERVICES

M/S N G CHOWDHURY

Singhs Construction