GENERAL Budget 2024 25 20 Percentage Malappuram Town Beatification Beautification of Malappuram Town in Malappuram LAC in Malappuram District Electrification General Electrical Work

SITC of Street Lights

OD275591/2025-2026:Supply installation testing commissioning of Decorative pole 3M height above the ground level made out of GI, tubular pole -T- washed and primered. (ASTM A123, with minimum average GI coating of 65 µm.), having two sections, having 3mm thickness bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 2000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty connector for loop in & loop out and provision for MCB. Design comply EN40 standard. The Pole Base plate should be with 200x200x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanized tube or hot dip galvanized through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with MRF Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total thickness 165 micron). The column to be painted in MRF antique copper finish/ golden as directed by the Engineer in charge The pole shall be of composite construction designed to withstand a wind load corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. Including foundation bolt. The pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 3M CLASSIC/ BLENHIN POLE + ROUND NECK BRACKET /Techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing.

OD275592/2025-2026:Supply installation testing commissioning of Decorative pole 4M height above the ground level made out of GI, tubular Pole-T - washed and primered. (ASTM A123, with minimum average GI coating of 65µm.), having two sections, with 3mm thickness bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 3000mm (L) x 76mm dia, in built junction looping box at bottom section with 32A heavy duty 4-way connector for loop in & loop out and provision for MCB. Design comply EN40 standard. The Pole Base plate should be with 200x200x12 mm. The column shall also be Provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanized tube or hot dip galvanized through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with MRF Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total thickness minimum165 micron). The decorative bracket of 500mm Single Overhang to provide for suspended mounting of luminaire. The complete column & bracket to be painted in MRF antique copper finish. /golden as directed by the Engineer in charge The pole shall be of composite construction designed to withstand a wind load corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure including foundation bolt. The base pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 4M CLASSIC/BLENHIN POLE HDGI PU PAINTED + 500MM SOH CASCADE ARM HDGI/Techno commercial equivalent make of Keselec/ Wipro/Crompton as per attached drawings.

OD275589/2025-2026:Supply & Installation of Decorative LED street lantern with a system output of 60W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a Vent Plug pressure equalization unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanized painted mounting bracket for a Suspended version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95,THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified ,potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper /golden with a marine treatment. and giving connection etc as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE SUS 60W NW T4 LED/ techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing.

OD275590/2025-2026:Supply & Installation of Decorative LED street lantern with a system output of 30W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a Vent Plug pressure equalization unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanized painted mounting bracket for a Suspended version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified, potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper /golden with a marine treatment. and giving connection etc. as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE PT 30W NW T4 LED/ Techno commercial or equivalent make of Keselec/Wipro/Crompton as per attached drawing

90.15.4.6:Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD177136/2025-2026:Supply and fixing of Threaded rod foundation bolt 4nos of 8.8 Grade M20 size in 600mm length using chemical anchoring vertically on the footpath. The bolt shall be anchored minimum 10cm inside main concrete and through top slab including 2 nuts washers equivalent to HIlti Threaded rod AM20x3000 8.8 Zinced + Injectable Motar HIT-RE 500 V4/500 including 32x6 GI strip below the slab connecting the bolt.

14.2:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD177143/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

OD281753/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554/(part I)/1988 for PVC & IS 7098/(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL pipe as required . 2x6sqmm

OD281755/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554(part I)/1988 for PVC & IS 7098(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL pipe as required. 4x6 sqmm

OD281756/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554(part I)/1988 for PVC & IS 7098(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL pipe as required. 4x10 sqmm

OD281759/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554(part I)/1988 for PVC & IS 7098(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL pipe as required. 4x16 sqmm

OD281762/2025-2026:Supply and laying of one number PVC insulated and PVC sheathed / XLPE aluminium armoured power cable of 1.1 KV grade conforming to IS 1554(part I)/1988 for PVC & IS 7098(part I)/1988 for XLPE of following size in the existing RCC/ HUME/ METAL pipe as required. 4x25 sqmm

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

OD271062/2025-2026:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 6 sq. mm (25mm)

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.34:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.16.2.5:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.50 mm dia. G.I. pipe (medium class)

OD281865/2025-2026:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & shall conform to relevant IS. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc. , detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc. shall not be used for the fabrication of panel assembly. The measurements will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD177132/2025-2026:Supplying and fixing 25A 4 Pole AC-1 contactor complete with connections, testing and commissioning etc. as required. (L&T make AC-1 contactor cat no MCX 02 or Techno Commercial equivalent approved by engineer in charge)

OD269005/2025-2026:Supply and providing 25A 2pole AC1 rated power contactor including giving connection etc as required.

OD177134/2025-2026:Supplying and fixing 24Hr Analog Timer switch with NO/NC operating voltage 230V in the existing APFC Panel complete with connections, testing and commissioning etc. as required.

OD177130/2025-2026:Supplying and fixing 40A, four pole, 415 volts, 2way centre OFF MCB type Change Over Switch in the existing MCB DB complete with connections, testing and commissioning etc. as required.

OD269006/2025-2026:Supplying and fixing following rating, Double pole, Centre off MCB Change over in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.10.5:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD177139/2025-2026:Supply and fixing 4 pole porcelain/Bakelite terminal connector

OD271066/2025-2026:Supply, conveyance and fixing spd Type 1+2 , I imp12.5 kA , I max50 kA , 3P+N conforming to IEC 61643-11 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. ( Make : LK AUSP123PN50D )

OD271092/2025-2026:Supply, conveyance and fixing SPD Type - 2(Class II), I imp 20 kA , I max40 kA , conforming to IEC 61643-11 suitable for 230 V, 50 Hz, AC supply in the existing panel assembly as required.

OD281764/2025-2026:Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipments including providing suitable size insulated sockets at the termination points or soldered properly,providing numbering ferules for the proper identification of the wiring, keeping the wiring firm by suitable tie/tie mounts/PVC duct etc as required.1.50sq mm wire single run

OD281765/2025-2026:Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipments including providing suitable size insulated sockets at the termination points or soldered properly,providing numbering ferules for the proper identification of the wiring, keeping the wiring firm by suitable tie/tie mounts/PVC duct etc as required. 4.00sq mm wire single run

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD177131/2025-2026:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD177129/2025-2026:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

90.16.1.11:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.06 mm GI conductor (8 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

OD281767/2025-2026:Providing and drawing 2.65 mm(12 SWG) copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

OD281766/2025-2026:Providing and drawing 3.15 mm (10 SWG) copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD177127/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required

OD177128/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

OD281783/2025-2026:Supply and fixing 63A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD177142/2025-2026:Supply and fixing 63A 2Way neutral link with connection in existing meter board

OD269007/2025-2026:Supply and fixing 32A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD269008/2025-2026:Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

7.10:Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

OD177141/2025-2026:Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc. as required.2.5cm,4cm,5cm height

OD277309/2025-2026:Cutting and making trenches in existing bituminous road / concrete road / cement concrete pavement / footpath for laying of underground PVC / HDPE cable for street-light works, including cutting to required width and depth using mechanical cutter, breaker or approved methods, carefully removing debris, stacking serviceable materials separately, disposing unserviceable materials to an approved dumping yard, refilling the trench with excavated earth or sand in layers, watering, ramming and compacting properly, and restoring the surface to its original condition with cement concrete.

OD277312/2025-2026:Clearing touchings and cutting branches of trees obstructing the installation of street light poles, as per the directions of the Engineer-in-Charge