Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.2 Cr
EMD Value
₹2.2 L
Closing Date
25 Nov 2026, 6:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat Road and Building Division, Morbi
Construction of Mangadh to Ajitgadh Road Km.0/0 to 2/500 (Non- Plan) Ta.Halvad , Dist.; Morbi (Under MMGSY-Normal-2025-26)
363464
89/2026
Open
Civil - All
Works
Morbi
9 documents required · 9 mandatory
₹3,600
Executive Engineer, Panchayat Road and Building Division, MORBI
₹2.2 L
5 Nov 2026
5 Nov 2026
5 Nov 2026
25 Nov 2026
5 Nov 2026
120 days
Name of work :- Construction of Mangadh to Ajitgadh Road Km.0/0 to 2/500 (Non-Plan)
Ta.Halvad , Dist.; Morbi (Under MMGSY-Normal-2025-26)
BILL OF QUANTITIES
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
1 Clearing and grubbing of road land 1.00 One 28455.09
incl.uprooting rank vegetation, grass, Hect.
bushes, shurbs, saplings and trees girth upto
300mm removal of stumps of trees cut
earlier and disposal of unserviceable
materials © By mechanical means in area of
2 Earthwork for embankment including 5681.00 One 169.28
breaking clods, dressing with all lead and lift Cum
(Excluding watering and consolidation) (A)
From borrow area with all lead and lift.
3 Box cutting the road surface to proper slope 1005.00 One 156.34
and camber for making a base for road work Cum
including removing the excavated stuff and
depositing on the road side slopes as
directed upto all lead.
4 Earthwork in cutting in all sorts of soil and 1350.00 One 181.57
soft Murrum including conveying and Cum
spreading the suff embankment as and
where directed within all lead from the end
of the cutting with all required lead and lift.
5 Supplying, stacking, spreading, rolling, 882.00 One 737.30
watering and consolidation to desired Cum
density of quarry spall with all lead and lift.
6 Providing & Laying of Granular Sub-Base 1438.00 One 1157.46
(G.S.B.)Grade-l C.B.R. not iess than 30% by Cum
providing close graded materials, consisting
of B.T. crushed stone aggregates 53 mm to
mm to below @ 40% combination, spreading
in uniform layers with motor grader on
prepared surface, mixing by mix in place
method with front end loader at OMC, and
compacting with vibratory roller to achieve
desired density, complete as per Clause
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
7 WBM Grading-1 542.00 One 1643.27
Providing, laying, spreading and compacting Cum
stone agg. Of 90mm to 45mm size to water
bound macadam (WBM Gr.I) specification
including spreading in uniform thickness,
hand packing, rolling with smooth wheel
roller 80-100 KN in stage to proper grade and
camber, applying and brooming, stone
screening/binding material to fill-up the
intersties of coarse agg., watering and
compacting to the required density grading-
1 as per Technical Specification Clasue.405
8 WBM Grading-2 1469.00 One 1506.92
Providing, laying, spreading and compacting Cum
stone agg. Of 63mm to 45mm size to water
bound macadam (WBM Gr.II) specification
including spreading in uniform thickness,
hand packing, rolling with smooth wheel
roller 80-100 KN in stage to proper grade and
camber, applying and brooming, stone
screening/binding material to fill-up the
intersties of coarse agg., watering and
compacting to the required density grading-
2 as per Technical Specification Clasue.405
9 Providing, laying, spreading and compacting 103.00 One 1506.92
stone aggregates of 40 to 63 mm sizes with Cum
all lead to water bound macadam (W.B.M)
specification including spreading in uniform
thickness, hand packing, rolling with smooth
wheel roller 80-100 kN in stages to proper
grade and camber, applying and brooming,
stone screening/binding materials to fill-up
the interstices of coarse aggregate, watering
and compacting to the required density
grading as per Technical Specification Clause
405. By Machinary Means
10 Rolling and Watering of earthwork in layers 6184.00 One 22.96
with vibratory roller including filling in Cum
depression which occur during the process
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
11 Providing and laying bitumenous grout 377.00 One 2840.20
37.50mm thick using Emulsion RS1 for tack MT
coat at the rate of 4.0kg/10sqm on on
Esisting WBM and using BT chips for
required gradation with the asphalt of grade
VG-30 at the rate of 1.99% i.e 19.90kg/MT by
weight of mix including heating and mixing
in drum mix plant , transporting the mix and
spreading the same by paver finisher and
consolidation as per MOST specification
including cost of all materials fuel, labours,
tools and plants etc. using contractor's own
drum mix plant etc. complete.
12 Providing, laying and rolling of 25mm thick 264.00 One 3711.08
open graded premix bituminous carpet with MT
B.T aggregates as specified and using
Emulsion RS1 for tack coat at the rate of
2.50kg/10sqm on B.T.Surface (As per IRC-
16) and using bitumen VG-30 for mixing
with aggregate at the rate of 3.36% i.e
33.60kg/MT. of total mix including heating
and mixing in drum mix plant, spreading the
same with paver finisher and consolidation
with vibratory roller including necessary
firewood, oil, lubricants, labour charges etc.
using equipment tools etc. completed in
accordance with the requirement of
13 Providing and laying seal coat using Bitumin 137.00 One 4071.53
grade VG-30 with B.T. aggregate as specified MT
using aggregate at the rate of
0.18cum/10sqm. And bitumen for mixing
with aggregate at the rate of 4.5% i.e
45.00kg/MT of total mix including heating
and mixing in drum mix plant and spreading
the same by paver finisher and consolidation
with vibratory roller including necessary
using contractor's own drum mix plant,
machineries and equipment, tools etc.
complete in accordanace with the
requirement of specification.
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
14 Excavation for foundation upto 1.5m depth 512.00 One 253.88
including sorting out and stacking of useful Cum
materials and disposing of the excavated
stuff upto all lead. Dense or hard soil.
15 Providing and casting in situ ordinary 715.70 One 3921.64
cement concrete M-150 mix and providing Cum
necessary pin headers including shuttering,
scafilding, laying vibrating, curing and
finishing complete Without V-Grooves For
16 Providing and filling in foundation with 142.00 One 3345.58
ordinary cement concrete M-100 mix and Cum
providing necessary vertical pin headers
incl. Formwork, vibrating, ramming and
curing complete.
17 Providing and casting in situ Ordinary 105.60 One 4338.66
cement concrete- M-200 for average Various Cum
thickness wearing coat laid as directed
incuding. tamping, vibrating, finishing,
curring and filling in joints with bitumen
18 Construction of dry lean cement concrete 422.00 One 2626.00
Sub- base over a prepared sub-grade with Cum
coarse and fine aggregate conforming to IS:
383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not
to exceed 15:1, aggregate gradation after
blending to be as per table 600-1, cement
content not to be less than 220 kg/ cum,
optimum moisture content to be determined
during trial length construction, concrete
strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to
site, laid with paver, compacting with 8-10
tonnes vibratory roller, finishing and curing
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
19 Construction of CC M-25 un-reinforced, 812.00 One 6031.72
dowel jointed, plain cement concrete Cum
pavement over a prepared sub base with
grade cement @ 380 kg per cum, coarse and
fine aggregate conforming to IS
maximum size of coarse aggregate not
exceeding 25 mm, mixed in a batching and
mixing plant as per approved mix design,
transported to site, laid with a fixed form or
slip form paver, spread, compacted and
finished in a continuous operation including
provision of contraction, expansion,
construction and longitudinal joints, joint
filler, separation membrane, sealant primer,
joint sealant, debonding strip, dowel bar, tie
rod, admixtures such as hardner powder,
hardening compound & micro fibre
(polypropylene fibre) admixtures confirming
to IS SP:46 as approved. curina compound.
finishina to lines and levels.
20 Providing and laying in Position FE - 3.320 One 73858.69
500/500D TMT bar reinforcement including MT
cutting, bending, hooking and tying
complete as per detailed drawings for the
following (A) Piers (B) Abutments (C)
Returns (D) Walls etc.
21 Providing and Fixing in position FE- 3.910 One 73243.02
500/500D TMT bar reinforcement including MT
cutting, bending, hooking, and tying
complete as per detailed drawaing (A)RCC
kerb (B) RCC Footpath (B) RCC Solid Slab/
App. Slab / Wearing coat.
22 Filling available excavated earth (excluding 512.00 One 136.92
rock ) in trenches plinth sides of foundation Cum
etc. in layers not exceeding 20cm in depth
consolidating each deposited layer by
ramming and watering.
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
23 Supplying and fixing reinforced concrete 23.00 One 3469.26
heavy duty non presure pipes with collars Rmt.
for culverts carrying heavy traffic as per IS
458-1991 specification including setting and
joinng the pipes in C.M. 1:2 watering and
laying (to level or slope) of I.S. Class NP-3 of
following internal diameter with all lead and
lift. (i) 900mm Dia.
24 Supplying and fixing reinforced concrete 112.50 One 5560.01
heavy duty non presure pipes with collars Rmt.
for culverts carrying heavy traffic as per IS
458-1991 specification including setting and
joinng the pipes in C.M. 1:2 watering and
laying (to level or slope) of I.S. Class NP-3 of
following internal diameter with all lead and
lift. (i) 1200mm Dia.
25 Removing all types of Hume pipes and 5.00 One 419.02
stacking within a lead of 1000m including Rmt.
earthwork and Dismantaling of Masonary
works as per technical Specification Clause.
202 All Diameter (above 600mm to 900mm.
And above 900mm)
26 Demolition and desposal of unserviceable 248.00 One 623.02
materials with all lead and lift. (II) Cum
Unreinforced cement concrete.
27 Diversion: Providing temporary diversion 120.00 One 1318.05
suitable for traffic during the construction Rmt.
period of the C.D. Structure work by
levelling existing ground and constructiong
suitable compacted embankment, road
surface with providing, flaying &
consolidation of 100 mm WBM in layers on
carriage width with safety measures like sign
board, guard stone & maintain for motorable
road throughout construction period etc. and
also dismantle diversion after completion of
work etc. complete as per instrucion of
Engineer-in-Charge.
28 Providing and fixing Precast cement concrete 10.00 One 356.50
Hectometer as per IRC type design incl. No
painting, lettering etc. fixing in C.C. 1:5:10.
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
29 Providing and fixing Precast cement concrete 54.00 One 350.81
Guard stone as per I.R.C. type design No
including white washing etc. complete.
Fixing in C.C.1:5:10.
30 Providing and fixing ordinary Kilometer 3.00 One 704.34
stone of pre-cast C.C. 1:2:4 including No
necessary reinforcement as per I.R.C. type
design in C..C. 1:4:8 including painting
lettering etc. complete. (For ODR, VR)
31 Providing and fixing Indicator stone of 112.00 One 343.27
approve stone as per I.R.C. type design in No
C.C. 1:4:8 including white washing etc.
complete Fixing in C.C.1:5:10
32 Providing and fixing Village name Boards as 2.00 One 3437.60
per standard I.R.C. type design of steel plate No
incl. painting, lettering etc. complete with
fixing in C.C. 1:4:8 block with necessary
excavation etc. complete
33 Providing and fixing Flood guage post mark 2.00 One 2096.60
of 'C' angle size 100mm x 50mm x 5mm thick No
(in head wall 0.50mt. And 1.50mt. Out side
with painting and lettering with redeum
color as directed.)
34 Informatory Signs :-Providing and fixing sing boards 2.00 One 3856.90
made out of 2mm aluminium sheet; size 80 x 60cms. No
rectangle as per the design of IRC-67-1977 pre treated
with phospheting process & acid teching; coated with
one coat of epoxyprimer and two coats of best
qualityepoxy paint; reflectorised with retro refiective
sheeting as per latest M.O.S.T. Specifications; 3.1m
long stand postand frame fabricated from suitable
sizeiron angle of 35 x 35 x 3mm75x75x6mm as
required; painted with best qualityepoxy coatings in
black and whitebends. the details of symbol for
eachboard shall details of symbol for eachboard shall
be as per the instruction ofengineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x45 x
60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in
charge.(A) Engineer Grade(VR)...
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
35 Regulatory/Mandatory signs :Providing and fixing 2.00 One 3439.81
sing boards made out of 2mm aluminium sheet; size No
60cms. diameter circle as per the design of IRC-67-
1977 pre treated with phospheting process & acid
eteching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint; reflectorised
with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x
3mm 75x75x6mm as required; painted with best
quality epoxy coatings in black and white bends. the
details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site
shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for
each leg. including excavation curing etc. complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
36 Hazard Marker sign : 2.00 One 2423.74
Providing and Fixing sign boards made out of 2mm No
aluminum sheet : size 90*30 cms. rectangle as per
design / Drawing attached (IRC). Pretreated with
phospheting process and acid etching : coated with
one coat of epoxy primer and two coats of best
quality epoxy paint: reflectorised with retro reflective
sheeting as per latest M.O.S.T specification: 3.1 M.
long (2 nos) stand post and frame fabricated from
suitable size iron angle of 35*35*3mm and 50*50*5mm
: painted with best quality epoxy coatings in black
and white bends the details of symbole or inscription
/ numerals for each board shall be as per the
instruction of engineer in charge the fixing at site shall
be in 1:2:4 CC block of size 45*45*60 cms for each leg:
including excvation curing etc. comp.under the
supervision of engineer-in-charge.(B) Engineering
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
37 Direction sign (Junction board):-Providing and fixing 2.00 One 14831.71
sing boards made out of 2mm aluminium sheet; size No
244 x 122cms. rectangle as as per the design of IRC-67-
1977 pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint; reflectorised
with retro refiective sheeting as per latest
M.O.S.T.Specifications; Letters and numerals should
be as per IRC-30-1968, 3.1m long (2 nos) stand post
and frame fabricated from suitable size iron angle of
50 x 50 x 5mm 75x75x6mm as required; painted with
best quality epoxy coatings in black and white bends.
the details of symbol or inscription / numerals for
each board shall be as per the instruction of engineer
in charge.The fixing at site shall be in 1:2:4 CC block
of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision
of engineer in charge.(A) Engineer Grade.
38 Cautionary Warning Sign : Providing and fixing sign 2.00 One 3808.66
boards made out of 2mm Aluminium sheet size No
90x90x90 cms. Equilateral treangle as per the design
of IRC-67-1977 pre treated with phospheting process
and acid etching coated with one coat of apoxy
primer and two coats of best quality epoxy paint
reflectorised with retro reflective sheeting as per latest
MOST specification 3.1 Mt. long stand post and frame
fabricated from suitable size iron angle of
35x35x3mm, 75x75x6mm. as required painted with
best quality epoxy coating in black and white bends
the details of symbole for each board shall be as per
the instruction of Engineer in charge the fixing at site
shall be in 1:2:4 CC block of size 45x45x60cms. for
each leg including excavation curring etc. complete
under the supervision of engineer in charge (A)
Engineering Grade.
39 Providing and erecting logo cum informatory retro 1.00 One 6050.91
reflectorised board as per IRC-67 made of engineering No
grade sheeting as per specification fixed over
alluminium sheeting,2mm. thick as logo board with
vertical support of M.S. angle 35x35x5 mm and lateral
clearance of 100mm between logo & informatory
board and 2mm.thick M.S. plate asinformation board
with area exceeding 0.90 sqm. fixed on frame of an
angle 35x35x5 mm and supported on a M.S. angle
iron post 75mm x75mm x6 mm - 2Nos firmly fixed to
the ground by means of properly designed
foundation with M 15 grade cement concrete 45cm
x45cm x60cm, below ground level as per drawing,
including paiting and installation at site.
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
40 Road Marking with Hot Applied paints with 366.00 One 367.73
reflectorising glass beads on bitumin surface Sqm
providing and laying a hot applied thermoplasting
compund 2.5mm thick including reflectorising glass
beads @250 gm per sq.mtr area, thickness of 2.5mm is
excluding of surface applied glass beads as per IRC:35-
2015 the finished surface to be level, uniform and free
from streaks and holes, zebra
patta/bump/centerline/edge line/ cut patta. the
while color marking should provide liminance
coefficient on cement road shall be min.
mcd/m2/lux and asphalt road shall be min
mcd/m2/lux during the survice life during the date
the marking should meet the performanace criteria
for night time reflectivity, wet reflectivity and skid
resistance as mentioned in the section-15 of IRC 35-
2015 warranty for retroreflectivity shall be two years.
41 Cate eye / road stud/ RPM : Supplying 145.00 One 326.23
Raised Pavement markers of polycarbonate No
and ABS moulded body and reflective panels
with micro prismatic lens (No glass bead
lens) capable of providing total internal
reflection of the light entering the lens face
and shall support a load of 13635 kgs. tested
in accordanace to ASTM D 4280 type H and
complying to specification of category A of
MORTH circular No RW/NH/33023/10-97-
DO III Dt. 11-06-1997. the height, width and
length shall be exeed 20mm, 130mm and
130mm and with minimum reflective area of
13sqcm on each side and the slope to the
base shall be 35+/-5 degree. the body of the
marker should having finger grip for easy
and accurate placement and application with
epoxy /bituminous adhesive as
recommended by the manufacturer of the
marker. the colour of the marker should be
as per the IRC:35-2015 and as directed by
Engineer-in-charge.
Rupees Two Crore Fifteen Lakh(s) Thirty Three Thousand Three Hundred Twenty
Four And Paise Ninety Five Only
Item Description of Item (With brief specification Quantity Unit Rate Amount
No. and reference to book of Specification)
I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent
( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My
\ Our tender works put as under.
* Estimated Amount * Estimated Amount
Put to tender Rs…………………… Put to tender Rs……………………
Deduct……..……..% Add……..……..%
In words………………….……………… In words………………….………………
1.The Contractor shall exhibit a board with detailed specification and details of work as directed
by the Engineer-In-Charge for which no extra payment shall be made.
2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3.GST and Income tax TDS will be deducted at a source while making payments of bills
4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per
Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in
S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost
of difference of cement consumption have been deducted from the rate of original item at the
rate of input rate mentioned in all the tender.
Signature of Contractor.
Deputy Executive Engineer Executive Engineer
Panchayat R&B Sub Division Panchayat R&B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 SBD Mangadh MM-N-NP-Halvad.pdf
2 Speci Mangadh MM-N-NP-Halvad.pdf
3 Sch-B.pdf
4 GR SBD 10-10-26.pdf
5 DLC PQC Condition photoes etc Compress.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .