widening of certain roads including provn of road side furniture at HQ SAC U Trivabdrum

Amount

GENERAL SUMMARY (Note : Schedule 'A' Part I to VII are prepriced by MES under Ser No. 2 to 8.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)

Total of Schedule ‘A’ Part I “BUILDING/STRUCTURES (GATE)”

Total of Schedule ‘A’ Part II “SITE CLEARANCE/ EARTHWORK AND EXCAVATION ”

Total of Schedule ‘A’ Part III “ ROAD ”

Total of Schedule ‘A’ Part IV “HARD STANDING ”

Total of Schedule ‘A’ Part V “ RETAINING WALL”

Total of Schedule ‘A’ Part VI “ AREA DRAINAGE”

Total of Schedule ‘A’ Part VII “EXTERNAL ELECTRIC SUPPLY”

Sch 'A' Part- VIII - MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)

M&L for two coat of exterior emulsion weather coat paint over the new plasterd wall surface including preparation of surfaces and one coat of primer complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters, etc.on roads, pavements and the like minimum 2mm thick with thermoplastic road marking paint white and including preparation of old surface to receive the painting complete all as specified and directed.

S&F Direction CAT's eyes of size 100x 90x19.80mm, two sides acrylic plastic reflector of make conforming to ASTM standards and fixed with epoxy/nail complete all as specified and directed.

Supply and installation of TRAFFIC signs made with high intensity grade tape (Avery or 3M or equivalent brand) pasted on 2mm thick aluminium sheet back frame angle of size 25x25x5mm, fixing angle of size 65x65x5mm, (2 Nos) complete including excavation for post holes, refilling with PCC 1:4:8 after fixing angles all as specified and directed by Engr-in-Charge for the following

HUMP AHEAD (600 MM DIA CIRCLE)

SPEED LIMIT (600MM DIA CIRCLE)

RIGHT HAND CURVE (600 MM DIA CIRCLE)

INTERSECTION (600 MM DIA CIRCLE)

LEFT HAND CURVE (600 MM DIA CIRCLE)

Supply and installation of solar road stud made of poly carbonate ABS moulded body and shanks and PC top 3 Nos super bright LEDs on each side, also has dimond grade reflectors on each side for improved visibility, size of stud is 113 x 70mm with 15mm above the ground when installed. Weight = 780 +/- 20 gms, 1 No 1.2V rechargeable battery, 2.5V, 0.25-0.30W solar panel, visibility upto 600mtrs, complete all as specified and directed by Engr-in-Charge.

S&Foutdoor convex mirror of 100cm (min) dia, polycarbonate lens, Brim and back holding plates of fibre reinforced plastic with stainless steel pole including excavation for post holes, refilling with PCC 1:4:8 including fixing at suitable height complete all as specified and directed by Engr-in-Charge.

Supply and installation of speed Bumps made of special plastic compound which can take maximum load and impact. The size of each 1000x350x150 mm (height at the centre) The colours are UV stablized and do not require re-painting. Each block of plastic speed bump has 2 micro-prismatic reflectors for easy night time visibility. The speed bump is filled with concrtete base and then is to be fixed to the ground surface with epoxy and nails.

Supply and laying un reinforced precast concrete cable cover class HV type I flat of size 300mm x 180mm x 40mm , factory made and ISI marked all as specified and as directed.

Dismantling of old unsv HT PCC pole 11 Mtr complete including foundation from site all as specified and as directed.

Dismantling of existing PCC pole 9 Mtr omplete including foundation from site all as specified and as directed.

M&L for shifting of LT steel tubular pole 9 mtr including therir foundation , coping within 10Mtr all as specified and as directed by Eng-in- charge.

S&F energy saving luminare wattage 10 W capacity LED type 240 V , AC 50 Hz with minimum lumen , output of 560 prewired with IP 65 protection including provision of black colour powder coated hollow pipe or bollard not more than 500mm height , 104mm dia, electronic control duly wired up to terminal block including necessary fixing arrangement , electric connection, PCC basement etc complete all as specified and directed.

Dismantling of taking down of unsv HT cable of size 95 Sqmm 3 core all as specified and as directed.

S&F HT cable route indicator cast iron of suitable size along HT cable trench including planting in ground with PCC complete all as specified and as directed.

M/S SABU PETER