REPAIR MAINT JOINERY PLUMBING TILING ROOF SHEETING FALSE CEILING AND MISC WORK IN MD OTM ACCN IN POCKET 7 AND 8 UNDER AGE BR III IN GE ROORKEE

Amount

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and refixing in same opening complete all as specified and directed.

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S&F IInd class hard wood plain.solid straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and directed.

S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc complete all as specified and directed.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

S & F 30 mm thick flush shutters, Factory Made solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed skelton shutters Factory Made open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a) complete all as specified and directed.

S&F II nd class HW, 35 mm thick plain framed Factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium snap beading, screws etc. complete all as specified and as directed by Engineer in Charge.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge.

S&F power coated aluminium grill or guard bars fixed to aluminium window, weight not less than 2.82 kg/Sqm complete all as specified of colour as approved by GE complete all as specified and directed by Engineer -in- Charge.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and as directed by Engineer in Charge.

All as per item No 21 above but in repair.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.

S&F 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed.

S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Factory made steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F as in repair 3mm thick ordinary quality sheet glass and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified and directed.

M&L in repair for 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice & other side balancing white lamination, fixed with screws to frame work as in cupboard shutters, shelves incl wooden beading at ends and sides complete all as specified and directed.

S&F 125 mm Aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted work of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old decorated surfaces of ceiling incl cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls incl cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M & L for Preparation of old surfaces of wall by Washing , rubbing down and stopping of distempered and apply one coat of oil bond distemper on wall by Roller complete all as specified and directed.

M&L for preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on wall complete all as specified and directed.

M/S AJIT CONSTRUCTION CO

M/S GIRI CONSTRUCTION CO.

m/s rajesh bros.

R.S BUILDERS

SMG Construction

M/s Inderlal

KISHORE CHAND DINESH CHAND