Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC CHIYAMIMYANA PO KANSAR TEHSIL PAONTA SAHIB SIRMOUR HP | SIRMAUR | SIRMAUR | HIMACHAL PRADESH | L1 | Accepted-AOC AOC | |
| 2 | L2₹4.0 L+₹34,931.20 (9.47%)Rejected-Finance | L2 | Rejected-Finance Reject | |
| 3 | L3₹4.1 L+₹41,360.45 (11.2%)Rejected-Finance CHAUHAN BUILDING LOWER PANTHAGHATTI SHIMLA | L3 | Rejected-Finance Reject | |
| 4 | L4₹4.2 L+₹50,919.45 (13.8%)Rejected-Finance | L4 | Rejected-Finance Reject | |
| 5 | L5₹4.7 L+₹98,717.70 (26.7%)Rejected-Finance R O VILLAGE KHERI CHANGAN PO KANGTA FELOG TEHSIL DADAHU ST DISTT SIRMOUR HP | L5 | Rejected-Finance Reject |
Tender Value
₹5.7 L
EMD Value
₹11,302
Closing Date
10 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti Division Nahan
Executive Engineer Jal Shakti Division Nahan
C/O RCC Storage Tank 25000 ltrs capacity at Kurla Kharak and Laying jointing and testing of GMS pipe at Okualta Chanron and Bhanet Panchayat of various dia
2023_HPIPH_71820_3
NHN-SMROO-722- 20277-347 dt 31-3-23
Open Tender
Civil Works
Item Rate
90 days
Nahan
Please refer Tender documents.
10 documents required · 10 mandatory
₹250
Executive Engineer Jal Shakti Division Nahan
₹11,302
Yes
29 Apr 2023
1 Apr 2023
10 Apr 2023
1 Apr 2023
10 Apr 2023
3 Apr 2023
Amount
Excavation in drains and channels etc.in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock & hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.
Laying,jointing,testing & commissioning in trenches following dia socketted galvanised mild steel tube of various dia of light grade as under confirming to BIS 1239-(Part-1)-1990 or latest with up to date ammendments, capable of with standing required test pressure as BIS code, in random lengths of 5.5 to 6.5 mtr.The pipe ends shall be socketted,Tees & bends shall be manufactured from parent pipe etc and cutting of pipes whereever required as per stie requirement as per site conditions i/c carriage in all leads & lifts and as directed by Engineer-Incharge.(Earth work shall be measured paid for separately).
25 mm dia (L/G )
20 mm dia (L/G )
15 mm dia (L/G )
Providing and fixing of GI Union of various dia of approved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed b
25 mm dia
20 mm dia
15 mm dia
Providing and fixing of Brass full way valve of various dia with wheel of approved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at s
25 mm dia
20 mm dia
15 mm dia
Excavation in foundation & trenches in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge .
Providing and laying cement concrete 1:4:8 ( 1cement:4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Providing and laying cement concrete 1:1.5:3 ( 1cement: 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0.10 mtr) thickness atteched pillaster, buttresses plinth and string courses etc. from top of foundation level up to floor two level.
Providing form work with steel plates 3.15 mm thick and welded with angle iron frame of 30x30x5 mm so as to give a frame of fair finish including centring , shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu reinforced concrete and plain concrete work in :-
a) Flat surface such as soffits of suspended floors, roofs, landing and the like floorsetc. 200 mm in thickness.
b) Vertical surface such as such as wall ( any thickness parttions & the like i/c attached pillars buttresses plinth & string courses & the like.
Providing mild/tor steel reinforcement for R.C.C. work including bending and binding and placing in position complete up to floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Providing and laying cement concrete 1:2:4 ( 1cement: 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor. Roofs, landings shelves and cantilevers upto floor two level including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Providing and fixing man hole cover with frame (Light duty single seal pattern 500 mm internal dia, total weight of cover and frame to be less than 38 Kg including all leads,lifts nad carriage of material at site and as directed by the Enegineer in Charge.
Steel work in built up section, trusses and framed work including cutting hoisting and fixing in position and applying a priming coat of read lead paint in grating framed guard bars ladders railing brackets and similar works including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge.
Laying and jointing in trenches galvanised mild steel tube for In Let , Out Let and Scour pipe (light grade) tube fitting (earth work to be measured and paid for seperately) including all leads, lifts and carriage of material at site and as directed by the Engineer Inchargte.
i) 50 mm Dia ( Light Grade)
RAMAN KUMAR
Dalip Singh
KUSHDEEP SINGH
Chaman Lal Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .