AM-2023-24-GENERAL-Annual maintenance work MI Section Pudukad LAC for the pumping season in the year 2023-24.-

Amount

Appendix A

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

OD4408/2023-2024:Engaging man mazdoor for urgent maintenance works related to pumping, clearing obstruction in canal and syphon and removal of rubbish up to a distance of 50m outside periphery and other urgent works as per the direction of departmental officers at site.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.10.1.2:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

OD6428/2023-2024:supplying 200mm pvc pipe (6kg/cm2) including specials such as bends ,elbows ,tees and reducers etc as per the site condition including cost taxes and conveyance of all materials ,labour charges and all other incidental charges etc complete as per the direction of deptl. officers at site.

OD6429/2023-2024:Laying ISI marked 200 mm dia (6kg/cm2 PVC Pipes including specials such as bends, elbows,Tees and reducers etc as per site condition and lowering into trenches to required depth, placing in position ,aligning to lines levels with proper fine earth cushion all round pipe and jointing with adequate qty of solvent cement for each joint with specials of (6 kg/cm2) where ever required and testing to the specified pressure after completion of work including all labour charges and all other incidental charges etc. complete.

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

14.29:Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.

50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm

50.9.15.4:Providing and fixing iron hooks and eyes: 150 mm

50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge

OD4409/2023-2024:Repairing the existing non return valves and sluice valves including all cost of materials,accessories and labour charges etc complete as per direction of departmental officers at site for the smooth functioning of the LI scheme

OD13482/2023-2024:Supplying and jointing C I NRV of 250 mm dia including specials and fittings of ISI specifications with a working pressure with charges for conveying to site loading unloading and conveying them with in initial lead and carefully lowering in to trenches placing in position to lines and levels ready for joint including earthwork excavating for trenches to a depth so as to provide a minimum cover of 0.9 m over the top of pipe providingfencing lighting watching fixing caution boards etc complete as per the direction of Departmental officers at site.

OD13509/2023-2024:Supplying and jointing C I WHEEL VALVE OR SLUICE VALVE of 125 mm dia including specials and fittings of ISI specifications with a working pressure with charges for conveying to site loading unloading and conveying them with in initial lead and carefully lowering in to trenches placing in position to lines and levels ready for joint including earthwork excavating for trenches to a depth so as to provide a minimum cover of 0.9 m over the top of pipe providingfencing lighting watching fixing caution boards etc complete as per the direction of Departmental officers at site.

14.57.1:Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade:One or more coats on old work

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

60.9:MS Pipes 300mm - Manufacturing supplying and fitting 300mm dia MS pipe of various length with shell thickness 6mm including painting with 2 coats of red oxide primer, laying the same to line and level as directed by departmental officers at site.

60.10:MS Flanges for 300mm pipe - Manufacturing supplying and fitting 300mm dia MS Flange having shell thickness 10mm depth 75mm with suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

JEFRIN PINHERO

Bidder Name

FRANCIS PINHERO

JEFRIN PINHERO