Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC KALIAPPA COMPLEX THRICHY ROAD RANGANATHAPURAM SULUR COIMBATORE 641 402 | COIMBATORE | COIMBATORE | TAMIL NADU | 641402 | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.2 L+₹1.0 L (6.90%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹16.7 L+₹1.5 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹16.7 L+₹1.6 L (10.7%)Rejected-Finance | L4 | Rejected-Finance Not L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-695006.
CERTAIN REPAIR/ MAINT OF MISC B/R WORKS AT ZONE A AREA IN VARIOUS BLDGS UNDER GE (ARMY) TRIVANDRUM
2023_MES_610439_1
8122/E8
Open Tender
Civil Works
Item Rate
180 days
GE Army Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹40,000
Yes
26 Sept 2023
24 Jul 2023
26 Aug 2023
24 Jul 2023
19 Aug 2023
7 Aug 2023
25 Jul 2023 - 29 Jul 2023
Amount
Demolition of cement concrete including tiles and screed bed of any description in any position not otherwise specially provided for complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete type B0, 1:2:4 (using 12.50 mm graded stone aggregate) as in sub-base of floor, leveling course, sunken floor, etc. complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.
M&L for vitrified ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirtings, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 for laying tiles complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for 4 mm thickness non-asbestos fibre cement building boards (decorative type) fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm complete all as specified and directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling wooden fillets for roof tiles battens, rails, posts, rafters, purlins etc. under 40 sq.cm in section (unframed work) complete all as specified and directed.
M&L for second class hardwood plain fillets (sectional area exceeding 13 sq.cm and not exceeding 25 sq.cm), square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.
All as per Sl No. 12.00 here-in-before, but except fillets complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, unframed work, in any position complete all as specified and directed.
M&L for second class hardwood in scantlings, clean sawn complete all as specified and directed.
All as per Sl No. 15.00 here-in-before, but except scantlings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed.
Demolition of brick work/ PCC block/ stone wall masonry built in cement mortar and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed.
M&L for pre-cast cement concrete block masonry type C1, 1:3:6 using 20mm graded stone aggregate with solid blocks exceeding 10 cm in width and setting in CM 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick cement concrete type C2, 1:3:6 (40 mm graded stone aggregate) as in plinth, hard standing, sub-base of floor, etc. and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for roughening surfaces of old concrete surfaces by picking old damaged tar felt/ water proof membrane any type, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sq metre complete all as specified and directed.
M&L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate over RCC roof as leveling course complete all as specified and directed.
M&L for rendering 10 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar 1:3, mixed with water proofing compound @ 3% by the weight of cement, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed.
M&L for APP modified water proofing membrane thickness not less than 4mm and weighing not less than 4.50 Kg/ Sqm reinforced with non-woven polyester, matt black finished (weight not less than 150 gms / sqm), laying by torch application including minimum 100mm overlap over compatible primer @ 0.40Litre/sqm and finishing with solar reflective Bituminous aluminium paint 100 gms /sqm complete all as per manufacturer's instructions and specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) including aluminium grills with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. NOTE: (i) Weight of aluminium sections incorporated shall only be considered for deriving the weight under this item for accounting payment. But unit rate quoted shall be deemed to be included cost of rubber beading, handles, fittings, etc. (ii) Sheet glass will be measured and paid separately.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, SS friction stay hinges all complete as per architectural drawings and the directions of Engineer-in-Charge. NOTE: (i) Weight of aluminium sections incorporated shall only be considered for deriving the weight under this item for accounting payment. But unit rate quoted shall be deemed to be included cost of rubber beading, handles, fittings, etc. (ii) Sheet glass will be measured and paid separately.
S&F 3.00 mm thickness sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq.m in each pane complete all as specified and as directed.
S&F 3.00 mm thickness figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sq.m in each pane complete all as specified and as directed.
S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F 100 mm long stainless steel butt hinges, ISI marked fixed with steel screws complete all as specified and as directed.
S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
M&L for 18 to 20mm thick prelaminated MDF panels of interior grade type-II with melamine finish of approved shade for kitchen cabin/ wardrobe/ wall panelling, fixing with necessary fittings like keku fitting, spring clips, hanger plates, modular hinges/ clips, push fix or stud fittings as per manufacturer's instructions, including removal of old cupboard/ kitchen shelves any type complete all as specified and as directed.
M&L for non-skid coloured vitrified heavy duty tiles of size 30cm x 30cm x 8/10 mm thick, set, jointed and pointed in neat cement slurry matching with floors with and including screed bed 15mm thick CM 1:4 complete all as specified and as directed.
SHILPA ENGINEERS AND CONTRACTORS
M/S Vadakkeparambil Electro-Mechanic Service
M/s G.Ramachandran
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .