Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 CrAccepted-AOC GROUND FLOOR SHOP NO 25 KAPAS MANDI NARWANA 2024R18407 | NARWANA | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.4 Cr+₹1.1 Cr (5.75%)Rejected-AOC MD22 ELDECO MENSIONZ SOHNA ROAD NEAR FAZILPUR CHOCK GURGAON FF 19 OMAXE GURGAON MALL SOHNA ROAD GURUGRAM 2021R5777 | GURUGRAM | GURUGRAM | HARYANA | L2 | Rejected-AOC L2 | |
| 3 | L3₹20.1 Cr+₹1.8 Cr (9.64%)Rejected-AOC 81 ARYA NAGAR ASSANDH ROAD PANIPAT HARYANA 132103 | PANIPAT | HARYANA | 132103 | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | Bansal Construction Co, Gurgaon L2 | Rajeev Kumar Goel Contractors L3 | M/S ROHTASH KUMAR CONTRACTOR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Construction of cable trench 1 x 1 mtr with Chequerred plate. | 19 | Metre | 800 ₹15,200 Lowest | 8,002.8 ₹1,52,053.2 | 7,500 ₹1,42,500 |
| 2.00 | Earth filling in the platform (lead of 5 km). | 0.87 | cum | 900 ₹783 | 207.36 ₹180.4 Lowest | 250 ₹217.5 |
| 3.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 22.72 | Sqm | 790 ₹17,948.8 | 691.85 ₹15,718.83 Lowest | 1,000 ₹22,720 |
| 4.00 | Providing and fixing Barbed wire fencing. | 152.72 | Kg. | 180 ₹27,489.6 | 83.16 ₹12,700.2 Lowest | 90 ₹13,744.8 |
| 5.00 | Design, Supply, erection testing and commissioning of High Voltage/low voltage prefabricated 630 KVA Sub Station (CSS/ PSS) as per IS/IEC 62271 : Part 202. The enclosure shall be 21KA internal arc rated, natural ventilation, thermal class K10, IP54 having incoming VCB and distribution step down transformer of 11/0.433 KV, 11 KV with minimum plus /-5% taps,SCADA compatible HT metering, G.O. switch, IP 54 MV/ LV compartment, IP 34 transformer compartment, minimu ambient 40degree C, H.Pole equipment and any other contingent thereto complete in all respect as per DHBVN guidelines, approved make and directions of Engineer-in-charge as per 630 KVA capacity. | 1 | Each | 39,00,000 ₹39,00,000 | 39,95,600.4 ₹39,95,600.4 | 38,00,000 ₹38,00,000 Lowest |
| 6.00 | SITC of LT panels of 325 cum/hr x 76 mtr head horizontal pump sets in (4w plus 2s) configration. SCADA compatible and feeders for internal and external ligting, instrumentation with auxilliaries and spares etc. | 1 | Each | 6,00,000 ₹6,00,000 Lowest | 60,56,262 ₹60,56,262 | 58,00,000 ₹58,00,000 |
| 7.00 | Providing and Fixing of IK07 IP-66 protected high power 200W LED flood light system with Pressure diecast aluminium housing LM6/ ADC12material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted and has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy )=120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @)=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor )0.95 ,driver Efficiency )85% , THD(I) (10% , driver current (1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min )=4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index )70 and CCT 5700K ±355K. Driver current (1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure `A` attached with this BSR . | 16 | Each | 29,000 ₹4,64,000 | 23,917.68 ₹3,82,682.88 Lowest | 25,000 ₹4,00,000 |
| 8.00 | Providing and Fixing of 20 watt polycarbonate base IP20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate/extruded aluminium powder coated housing with in built driver , Power Consumption of 18W/20W ,system lumen efficacy = 120 lm/Watt output, internal surge protection of 2.5 KV with Short and Open circuit protection,THD ( 10% ,p.f.=0.95, CRI )80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate /Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure `A` attacheded with this BSR. | 25 | Each | 400 ₹10,000 | 253.8 ₹6,345 | 250 ₹6,250 Lowest |
| 9.00 | Supply Installation Testing and Commissioning of 5 KVA UPS as per satisfaction of Engineer-in-charge. | 1 | Each | 44,500 ₹44,500 | 46,116 ₹46,116 | 40,000 ₹40,000 Lowest |
| 10.00 | Providing and fixing of ultrasonic Level Sensor with display. The rate includes cost of setting the same to correct line including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge. | 3 | Each | 1,20,000 ₹3,60,000 | 1,05,300 ₹3,15,900 | 1,05,000 ₹3,15,000 Lowest |
Tender Value
₹18.4 Cr
EMD Value
₹36.9 L
Closing Date
13 Jan 2026, 5:00 pmClosed
ANKIT BHARDWAJ
Division FMDA
Design, laying, testing, commissioning of 400mm, 600 mm i/d D.I K-9 Pipe line - 7.1 (27.7 KM) from Proposed MBS at Dadasiya and New Ranney wells at Lalpur, Mahawatpur and Amipur, 300 mm i/d D.I pipe (1 KM) on Surajkund Road with design etc.
2025_HRY_490590_1
2025BEB0F365 2E89 4E13 86FF 6AA0EDE4995F1851002
Open Tender
Civil Works
Works
540 days
Faridabad (MC)
2 documents required · 2 mandatory
₹1,180
₹36.9 L
Yes
FMDA Office, SCO-28-32, Sec-12, Faridbad
20 May 2026
16 Dec 2025
14 Jan 2026
16 Dec 2025
13 Jan 2026
16 Dec 2025
16 Dec 2025 - 17 Dec 2025
26 Dec 2025
Earth filling in the platform (lead of 5 km).
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing Barbed wire fencing.
Supply of Instrument Cables 0.75 sqmm sheathed 3 core complete in all respect to the satisfaction of Engineer-in-charge.
Horizontal directional drilling/Boring (HDD) to the precise dimension by trenchless technology complete in all respects in normal soil condition but not rock/bolder/any underground utilities like foundation water supply line coming in alignment or other underground obstruction suitable for MS casing pipe of size 1024 mm o/d 12mm thick.
Providing and Insertion of 12 mm thick M.S casing pipeline 1000 mm i/d (Fe330 grade) duly aligning, fixing in position, jointing and Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer-incharge by providing Roller arrangement for smooth insertion and anchoring of pipe throughout the length with HDPE spacers at a distance of 2 meters apart to avoid contract of carrier pipe including cutting, jointing, radio graphically as per IS: 1182 Hydraulic testing including carriage of material to site of work complete in all respects as entire satisfaction of Engineer-in-Charge.
Providing and Fixing of 600mm i/d M.S pipe 10 mm thick(Fe-330 grade) Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect.
Providing and Inserting of 600mm i/d M.S. carrier pipe 10 mm thick(Fe-330 grade) Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect.
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
HSR Items- Master Water Supply Scheme Faridabad- Design, laying, testing, commissioning of 400mm, 600 mm i/d D.I K-9 Pipe line - 7.1 (27.7 KM) from Proposed MBS at Dadasiya and New Ranney wells at Lalpur, Mahawatpur and Amipur, 300 mm i/d D.I pipe (1 KM) on Surajkund Road with design, construction and commissioning of 4340 KL capacity Boosting station along with all contingent work such as road, canal crossing, trenchless pipe laying etc. with 5 years operation and maintenance including 2 years DLP (as per scope of work).
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.94 MB
BOQ_568878.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .