C/O Civil Hospital (Additional Block) at Palampur in Tehsil Palampur Distt. Kangra (HP) (SH- Providing and fixing Yard lighting therein)

Amount

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Make:-KEI/SCI/Havells/Plaza

Armoured cable 6 sq. mm (twin core)

Armoured cable 10 sq. mm (twin core)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Makes:- L&T/Legrand/Schneider.

Single pole. Cat-A.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make:-KEI/SCI/Havells/Plaza

PVC insulated HRFR LS Copper conductor 1.5 Sq. mm.

3x2.5 Sq. mm.

Supply and erectionof Steel Poles - are made out of mild steel tubes with cast Aluminium embellisment having bottom dia. 140mm. Pole base-140 are made ouy of die cast aluminium , dully painted with PU paint ( Golden Colour). The poles are suitable for different type of brackets as single,twin,tripple luminaire Hanging mounting . The pole have service window at the bottom compromising four way 25 amps connectors terminal and a MCB. The polescan be mounted with four numbers anchor bolts as per foundation drawing etc complete in all respect and to the best satisfaction of engineer in charge.

Makes:- Twinkle LUMAX -R- -125-81 -Q2-300 - 3mtr.

Providing and fixing 40 Watt Arctura LED fixture (5000L) made of spun alum, housing with strudy bracket with powder LED,s are mounted directly on extruded alum. Heat sinks . A UV stablized PC/PMMA diffuser is provided for glaire free lightining with high visual comfort. It should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 170-270 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

40 Watt Arctura LED

Makes:- Twinkle Lumax PT` -155 - E-27 40Watt

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- Make: Diplast/BEC/Finolex

32 mm. dia

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type street light L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of1000/1250A TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 900 X W-800 X D-300MM. Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved / tested from the CPRI lab and should be confirm to I.S. 64139( EVA make or its eqivalent approved make)

The panel shall include the following switchgear & accessiories as per the Make of L&T, ABB,Legrand,Hager.

MATERIAL:

Incomer

MCCB 63 A 4p 36 KA TMR with O/L& S/C . E/F protection ( 1No.)

Spreader link MCCB 63 A 4p (2 Nos.)

Digital Metering Set (Detail Below)

Phase indicator lamp . 3 Nos.

SP MCB 6A 10 KA 3 Nos.)

65 A TP cont coil voltage 220 v

Time Switch analog

OUTGOING :

Indication Lamp LED Type (3 Nos.)

SP MCB 6A 10 KA 3 Nos.)

OUTGOING :

MCCB 63 A 4p 25KA TMR with O/L& S/C . E/F protection ( 6No.)

SPMCB 6A to 32 Amp 10KA

N link and Bus Bar

MCB Short Bus Bar

Supplying and Fixing 40 Watt LED Bulb in the exsisting post top fitting complete in all respect and to the best satisfaction of engineer in charge

pankaj saini

M/s Jamwal nxt gen energy solutions