Body and cabin repairs to Truck No. JK05A/8186, pertaining to Work Shop Sub Division Baramulla.

Amount

Complete dismantling of cabin roof top by way of removing existing damaged/bent MS angle/wooden planks/GI sheets. The job includes p/f of new GI sheets of size 4'x8'x2 no. by way of cutting to size, MS angles of 35x35x5mm, ply sheet, hood and sunmica sheets. The job aslo includes denting, welding, pluging all leak points and riveting of sheets.

Providing and fitting of Aluminium chequered plate (8'x4=4No for each truck) for outer surface of the cabin after removing of old damaged sheets.

Repairs to cabin front show by way of replacing damaged worn out wooden and MS angle supporting members by new ones and then fixing with GI sheeting and aluminium stripping (Gola) on both sides.

Repairs to tool box by way of denting, patching, gas welding and replacing damaged MS angle, plywood etc. The job also includes dismatling of cabin back, straightening of bent angles, bolting, welding to align properly and fitting of existing MS sheets by welding and riveting.

Dismantling of cabin back, straightening of bent angles, bolting, welding to align properly. The job includes providing and fixing of new MS sheet 26 guage and then covering complete cabin back with plywood duly fixed with teak ply complete.

Body repairs by way of stretching/straightening body sides of required alignment. The job includes denting, welding of damaged or bent angles and then providing fitting of new side angles in 50x50x6mm 10 feet long with nuts and bolts complete as per instruction of engineer in charge for firm alignment of body.

P/F of side beading Alumunuim strips 2'x5'x2 no. after replacing worn out wooden planks and plywood sheets.

P/F of new door glass to the right side including rubber beading, nails, silicone adhesive, channel etc. complete

Door setting by way of replacing of worn out damaged wooden planks, plywood after denting and patching of door angles. The job also includes P/F of door Aluminium sheeting, riveting and door locks handle.

Repairs to front wind screen frame structure by way of removal /dismantling of old damaged main supporting members and fabrication with new taper frame structure fabricated out of MS angle 50x50x5mm and MS sheet.

Providing and fitting of MS square pipe for cabin protection of size 10 feet long and 50mm dia Stainless steel balls on top and front bumper duly welded and screwed.

Bumper repairs by way of denting, patching, welding and bolting etc. complete.

Repairs to bracket for holding central roof pipe/bamboo rod.

Fabrication of driver stair case by way of p/f Ms angles 35x35x6mm complete as per directions of engineer incharge.

Dash board repairs by way of replacement of damaged wooden planks, ply wood, aluminuim strips, teak where ever required

Bonnet repairs by way of denting, patching and gas welding

Mud guard repairs front and rare by way of denting, patching and gas welding.

Repairs to chassis side by way of welding, patching, and p/f nuts, bolts and washer as required.

Providing and fitting of left side door glass and 02 No. side mirrors duly fitted with new rubber beading and adhesive.

Dalla repairs by way of denting, patching, welding and fitment of hooks.

P/F of wooden frame supports of size 75x35xon both sides of truck body .

NARINDER SINGH

M/s Sopore Engineering Works