CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE FOR CIVIL HOSPITALCAMPUS AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth Rupees Ninety Thousand Six

1 0.14 up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means 90,677.69 hundred Seventy Seven Paise Sixty Hec.

in area of light jungle Nine Only

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm

Rupees Seven hundred Thirty Four

2 538.45 diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the 734.19 Sqm

Paise Nineteen Only

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. Rupees One Thousand One

3 169.11 (i) R.C.C. Work 1,163.64 hundred Sixty Three Paise Sixty cum

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of Rupees Six hundred Two Paise

unserviceable materials with all lead and lift.(ii) In Cement Mortar. Fifty Five Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of

5 879.46 52.50 Rupees Fifty Two Paise Fifty Only Sqm

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and

6 10.00 52.50 Rupees Fifty Two Paise Fifty Only Sqm

disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts

Rupees Two hundred Six Paise

7 42.00 and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 206.48 Each

Forty Eight Only

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts

Rupees Two hundred Seventy Six

8 8.00 and other attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. 276.48 Each

Paise Forty Eight Only

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the Rupees Eighty Two Paise Twenty

materials with all lead and lift ( for any dia, of pipe) Four Only

Dismantling santtary fittings like wash basin . W.C. Pan Indian and European type, flushing tank etc. Including Rupees Four hundred Forty Six

stacking the materials with all lead and lift. Paise Twenty One Only

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing Rupees One hundred Twenty Eight

off the excavated stuff upto 50 Meter lead. All kinds of soil. Paise Ninety Nine Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and Rupees One hundred Forty Two

disposing off the excavated stuff upto 50 Meter lead. All kinds of soil. Paise Ninety Eight Only

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and Rupees One hundred Fifty Seven

disposing off the excavated stuff upto 50 Meter lead. All kinds of soil. Paise Sixteen Only

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. In layers not Rupees One hundred Thirty Seven

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. Paise Forty Seven Only

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete Rupees Four hundred Seventy

Seven Paise Thirty One Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, Rupees Two hundred Ninety Nine

ramming and consolidating etc. complete. Paise Sixty Seven Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended Rupees Ninety One Paise Sixty

10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as Three Only

P.C.C. : Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates

Rupees Four Thousand Forty

18 123.48 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 4,043.68 Cum

Three Paise Sixty Eight Only

Providing and laying controlled cement concrete M30 Concrete with all lead, including all transportation,

pumping, pouring,curing of concrete etc complete including the cost of formwork but excluding the cost of Rupees Six Thousand Two

19 251.38 reinforcement for reinforced concrete work in M30 all RCC elements of Foundation, Footings , Column & RCC Wall 6,216.69 hundred Sixteen Paise Sixty Nine Cum

at all floor level from below plinth and above plinth level. Only

Providing and laying controlled cement concrete M25 with all lead from plant site including all other taxes, octroi,

transportation, pumping, pouring,curing, vibrating of concrete etc complete including the cost of formwork but Rupees Seven Thousand One

20 256.74 excluding the cost of reinforcement for reinforced concrete work in M25 all RCC elements like Slabs, beams, plinth 7,159.24 hundred Fifty Nine Paise Twenty Cum

beams, chhajja, Lintel and stair cases etc at all floor level from below plinth and above plinth level. Four Only

Grade Slab : Providing and laying controlled cement concrete M.200 Concrete with all lead, including all

Rupees Four Thousand Eight

transportation, pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding

21 56.26 4,873.54 hundred Seventy Three Paise Fifty Cum

the cost of reinforcement for reinforced concrete work in M200 Grade Slab

TRIMIX ROAD : Providing & Laying 15.0 cm thick M200 grade controlled cement concrete without fly ash trimix

usinng P21(water reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of

cement including making C channel 75 x 75 mm required to maintain level,slope and thickness of the concrete

road leveling of placed concrete with surface vibrator and finishing with power floater & trowel light brooming the Rupees Six Thousand Seven

22 3.75 surface & including Construction joints to be formed at every 5 mt distance by grooving with mechanical saw 6,724.58 hundred Twenty Four Paise Fifty Cum

within 48 hrs. Groove/sawed joints shall be made of 5 mm width and depth min (1/3 rd depth of the pavement) Eight Only

as shown in the drawing and shall be filled with ready to use PU sealant of UV gradecutting & filling of expansion

joint as directed by Engineer in charge.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position Rupees Seventy Seven Paise

complete. All level Twenty Nine Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Rupees Four Thousand Six

24 359.93 foundation, plinth and superstructure in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional, For all 4,648.09 hundred Forty Eight Paise Nine Cum

Half brick masonary in common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

Rupees Seven hundred Seven

25 89.98 foundation, plinth and superstructure in Cement Mortar 1:4. (1- Cement : 4 -fine sand) (B) Conventional, For all 707.24 Sqm

Paise Twenty Four Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing 10mm.Thick cement plaster in single coat on ceiling and sofit for plastering upto any level finished even

Rupees One hundred Sixty Nine

26 782.67 and smooth in [I]Cement mortar 1:3 (1 cement : 3 fine sand) Work complete including all type of scaffolding , 169.58 Sqm

Paise Fifty Eight Only

tools, tackles etc complete. (For all floor)

Providing 20 mm thick double coat mala cement plaster on exterior masonry / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

Rupees Two hundred Ninety Paise

27 1053.93 finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including 290.72 Sqm

Seventy Two Only

scaffolding curing, drip edge, necessary etc. complete. (At all floor )

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) Work Rupees One hundred Forty Eight

complete including all type of scaffolding , tools, tackles etc complete. Paise Fifty Seven Only

Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer based texture and pattern with

standard tool and applicator as specified by manufacturer on exterior surfaces at all heights including scaffolding

to give even shades including thoroughly brushing the surfaces free from mortar droping and other foreign matter

and sand paper smoothed etc. complete as per the manufacture specifications and up to the satisfaction of Rupees Two hundred Thirty Two

Engineer in-charge/ Architect. The rate includes making of grooves, pattas and finishing as directed by Architect/ Paise Thirty Only

EIC. Paint shall be measured and paid in seperate tender item. (Item should be executed by approved applicator

Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at junction of concrete and brick work

or between different materials after making "V" grove between two different material surface and filled with rich

cement mortar and @ 100mm on each side of surfaces including necessary "U" nails / screws / washers with Rupees Two hundred Thirty Two

cleats for fixing, overlaps, scaffolding at all floors / all levels / all heights / all shapes etc. complete as per drawing / Paise Seventy Eight Only

specifications and direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure works.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and

fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per

square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS :

Rupees Seven hundred Eighty Nine

31 648.34 (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized 789.82 Sqm

gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete. Paise Eighty Two Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC

structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water

treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral

crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for

horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by Rupees Four hundred Six Paise

more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on Fifty Three Only

negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work

shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface Rupees Seven hundred Seventy

using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with Nine Paise Seventy Only

water and oxalic acid etc. as directed.

Water proof plaster : Providing 15 mm thick water proof cement plaster in single coat on brick/ block masonry or

RCC wall, at all heights, finished even and smooth in CM 1:3 (1 cement : 3 sand) including providing and mixing

water proofing materials of approved make in recommended proportions by manufacturer and as directed by Rupees One hundred Ninety Seven

Engineer-in-charge and finishing the surface wired finish to receive the tiles/ smooth finish with a floating coat of Paise Thirty Five Only

neat cement slurry at 2.75 Kg/ sqm etc. complete at basement, UGWT, OHWT, etc....

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement Rupees One Thousand Nineteen

slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm Paise Thirty Nine Only

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm

Rupees One Thousand One

thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to

36 115.41 1,198.64 hundred Ninety Eight Paise Sixty Sqm

match the shade of slab including rubbing and polishing etc. complete.

Providing and laying 16 to18 mm thick polished Granite stone slab machine cut in single piece in risers of

steps, dedo, pillar, sill and jambs (including zigzag pattern) or dedo laid on 10 mm thick cement mortar 1 : 3 (

cement : 3 coarse sand ) laid over and jointed withgrey cement slurry incl. rubbing and polishing, molding Rupees Two Thousand Five

37 87.70 (any type) / half round, full round etc complete. The rate includes lodding, unlodding, scaffolding, wastage, 2,533.37 hundred Thirty Three Paise Thirty Sqm

making hole, cutting/ chasing, rounding champhering, edge polishing of edges. The work shall be carried out as Seven Only

per the approval sample, Detail drawing and reference image of architect and engineer-in-charge. for all floors

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Urinal / Pantry Side partition : Providing & laying 16 to 18 mm thick both side mirror polished granite of approved

shade and quality, seleted and sorted for uniform color for urinal partition/ division plate as per design and in

required sizes and shapes after chasing /cutting of dado with cutter machine fixing shall be carried out in white

cement sand mortar (1:1) with matching pigment and/ or necessary adhesive. (Only finished granite work shall be Rupees Two Thousand Seven

measured). All expose edges shall be champhered and polished. The rate includes making hole, cutting/ chasing, hundred Forty Paise Fifty One Only

rounding champhering, edge polishing of edges. The work shall be carried out as per the approval of architect and

engineer-in-charge. at All Floor Level

Granite Platform (Basin & Sink Counter, Width up to 750mm) : Providing and constructing approved shade and

sample of Mirror finish granite platform , +750mm width 25 mm thick Machine polished kotah stone as vertical

supports at sides,including cutting granite & kotah as per required shape , dedo 1'6" ht & size to fit kitchen sink, Rupees Four Thousand Two

39 13.65 moulding, tiles adhesive nosing, chamfered front edges, fixing, disposal of debris etc complete with all labour and 4,268.69 hundred Sixty Eight Paise Sixty Rmt

materials and as per detailed drawings / architects instruction and approval by Engineer-in-charge. The sample Nine Only

mock shall be approved from Employer's representative/ Employer. at All Floor Level

Concrete flooring : Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

Rupees Three hundred Fifty Five

40 15.00 stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm 355.22 Sqm

Paise Twenty Two Only

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line Rupees Three hundred Seventy

and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. Four Paise Ninety Two Only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 Rupees Seven hundred Five Paise

: 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per Twelve Only

guidlines of IRC : SP 63-2018 etc. Complete.

RCC precast M.H. Frame & Cover : RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or at

site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing

Rupees Two Thousand Three

including cost of reinforcement M.S. Angles or Flat, curing mold work etc. (Heavy duty),

43 6.00 2,316.94 hundred Sixteen Paise Ninety Four No

1) Frame suitable for 50cm opening of MH

2) Cover suitable for 50cm opening of MH

Providing and fixing Cast Iron (C.I.) steps/rungs of approved quality, medium/heavy duty, with a minimum weight

as per approved design, confirming IS code specified including embedded anchor/holdfasts in the Reinforced

Cement Concrete (R.C.C.) wall or brick masonry, complete with necessary fixing and finishing as per standard Rupees One hundred Twenty Eight

design and drawings, Fixing C. I. steps in masonry in C. M. 1:3 & MS Febrication work including necessary C.C. for Paise Ninety Five Only

jointing, welding etc. complete during progress of the work. Dimension C.I. steps 50cm x 15cm. 2.25cm.)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

PANTRY BELOW STORAGE 600DX800 H: Providing, making, fixing as per detail drawing made from 19 mm IS

BWP ply structure and first class indian teak wood frame, both side 1 mm thick laminate finish shall be of

approved make & shade and as per the detail drawing. All the edges of ply shall be covered with 1 mm thick

laminate finish Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S 304 grade hardware

like Hinges, locks,6"handle , 75 mm tower bolts, ball catches/Magnet, The rate shall be inclusive of shelf both side

1 mm thick laminatefinish and as per detail drawer unit with SS 304 grade kitchen basket as per selction by

architect The rate shall be in sqm of elevation area for all floors and at all heights including all costs complete as Rupees Four Thousand Seven

45 10.40 per the Architectural drawings & instructions.Only the elevation area of the storage unit will be measured and 4,716.96 hundred Sixteen Paise Ninety Six Sqmt

paid for. Item for 1 mm thick laminate fixing and polishing is included in this item. The work shall be measured & Only

paid in sqm The rates shall be inclusive of all wastages, material, labor, taxes, transportation, loading, unloading,

fixing in position, etc. complete to the satisfaction of the Architect and EIC. The mock-up of 1 unit shall be

approved from EIC and Architecture prior to the final production. ( at all floor)

PANTRY ABOVE STORAGE 600DX800 H: Providing, making, fixing as per detail drawing made from 19 mm IS

BWP ply structure and first class indian teak wood frame, both side 1 mm thick laminate finish shall be of

approved make & shade and as per the detail drawing. All the edges of ply shall be covered with 1 mm thick

laminate finish Rate shall also inclusive of all necessary brass satin finish nickel plated/S.S 304 grade hardware

like Hinges, locks,6"handle, 75 mm tower bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for

all floors and at all heights including all costs complete as per the Architectural drawings & instructions.Only the

elevation area of the storage unit will be measured and paid for. Item for 1 mm thick laminate fixing and polishing

is included in this item. Approval of all loose material (sample of materials to be used) & raw manufacturing to be

got approved in advance from EIC & Architect prior to the final production of the work. Manufacturing shall in Rupees Ten Thousand Six hundred

parts or as whole as per the requirements & or assembled at site as per the requirement and directed by EIC & Sixty Paise Thirty Eight Only

Architect. All material to be used shall be as per the drawings & confirm to the relevant detailed material

specifications of this document. The work shall be measured & paid in sqm. The rates shall be inclusive of all

wastages, material, labor, taxes, transportation, loading, unloading, fixing in position, etc. complete to the

satisfaction of the Architect and EIC. The mock-up of 1 unit shall be approved from EIC and Architecture prior to

the final production. (at all floor)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Gypsum Ceiling : Providing and fixing single layer water proof gypsum board 12.5 mm thick sections using water

proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm

with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size

Rupees Six hundred Six Paise

47 116.98 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at 606.95 Sqm

Ninety Five Only

edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top

coat on ceiling incl. making necy. opening for light fitting,diffuser etc. comp. as per detail drawing as directed.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have

light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot

dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced Rupees One Thousand Six

48 317.03 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary 1,674.15 hundred Seventy Four Paise Fifteen Sqm

cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle Only

of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of pproved texture (Fine Fissured/Cosmos/Spintone)

in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be pre- ainted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineerin- charge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less

than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine

Fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Flush Door With WPC frame (50X150 mm) : Providing and fixing in position 35mm thick solid core wooden flush

doors of approved make having fire retardant ply facing on both sides and finished with 1 mm thick laminate as

Rupees Seven Thousand Four

approved , Hardware system of Geze/Dorma like ( Hinges , Boxer type door closer , Door handle , Euro profile

49 53.77 7,405.24 hundred Five Paise Twenty Four Sqm

lock , Door stop ) . work complete including all type of hardware, fittings , fixtures etc complete as per detailed

drawings and specifications. sample mock shall be approved from Employer's representative/ Employer.

Window : Providing & fixing in position standard extrude Aluminum Three track with Three sliding shutters in

which Two Shutters with Bajri or figure glass 4mm thick and one shutter with Stainless Steel Mosquito net In

Opening Position always one of Mosquito net shouter should be in Close Position all window section with colour

anodized three track top, sides Rail Sections all around For Sliding should be Used of 92.00 X 31.75 X 1.05 mm

Rupees Three Thousand Three

and Bottom Rail Section is 92.00 x 31.75 X 1.10 mm and all Three Sliding shutters Top and Bottom rail 18 X 40 X

50 43.60 3,320.88 hundred Twenty Paise Eighty Eight Sqm

0.91 mm handle section of size 18 X 40 X 0.91 and interlock rail 18 X 40 X 0.89 mm of approved shade & sliding

shutters and providing rubber gasket and Glazing Clips if necessary around the glass allover including providing

heavy handle, heavy lock, bracket, stoppers. As per drawing or as per instruction given by engineer in charge

Ventilation : Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm Rupees One Thousand One

51 1.26 (Section:2434, @ Wt. 0.643 Kg/mt) with colour Powder Coated alluminium frame for ventilation with 5mm thick 1,175.56 hundred Seventy Five Paise Fifty Sqm

frosted glass as details etc complete for Ventilation Six Only

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required

Rupees One hundred Fourteen

52 4001.61 spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 114.62 Kg

Paise Sixty Two Only

Bird Net : Providing and fixing approved make Bird net machine made net that is all weather proof as well as UV

stabilized, allows for zero maintenance, are easy to install or as per sample approved with fittings, Aluminium

frame work, screw, fixtures fastners etc complete. The rate shall be for complete item inclusive of all material,

Rupees Eight hundred Eighty Two

53 47.10 labour, wastages, necessary tools, scaffolding & tackles,approved make for all floors, all heights, all levels and all 882.48 Sqm

Paise Forty Eight Only

places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this.

Mosquito net jali : Providing and fixing Stainless steel mosquito net jali ,wire of I.S gauge designation 85-G with

wire of 0.56 mm fix in aluminium door, window, ventilator shutters of any size, any shape with etc all complete at

all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual Rupees Seven hundred Eighty

laying installed Jali shall be measured. (Cost of aluminium snap beading shall be paid in basic item) As per Three Paise Sixty One Only

approved by Arhitect and EIC. Work for all lead, lift, all floors, levels and heights.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Wall Punning : Providing and applying Plasto XP Gypsum plaster ( USG Boral) or equivalent make , minimum

mm thick in Wall and minimum 6 mm thick in ceiling , including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift) applying in position, Levelling, finishing, cleaning etc.

complete to satisfaction of Employer's representative/ Employer. The rate also include making of grooves above Rupees Four hundred Eighteen

55 50.00 skirting, Dedo tiles and around window and door jambs etc. (cost of Bonding agent to the ceiling or RCC surfaces is 418.14 Sqm

Paise Fourteen Only

to be included in the item).item shall be used as per instruction of Employer's representative/ Employer .

Collapsible Door : Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm

Rupees Six Thousand Three

braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

56 2.25 6,365.87 hundred Sixty Five Paise Eighty Qui.

steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat

of red lead paint.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to

Rupees Forty Paise Fifty Nine

57 2595.12 give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter 40.59 Sqm

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

Rupees Eighty Eight Paise Seventy

58 2595.12 surface to give an even shade including throughly brushing the surface free from mortar droppings and other 88.73 Sqm

foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

Rupees One hundred Twenty Two

59 1053.93 even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. etc 122.14 Sqm

Paise Fourteen Only

Applying priming coat over new steel and other metel surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing red lead. And Painting two coats on new steel and other Rupees One hundred Thirty Four

metal surface with enamel Paint, brushing, interior to give an even shade including cleaning the surface an even Paise Ninety Three Only

shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of Rupees One hundred Sixteen Paise

the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of Fifteen Only

removal of sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 50mm Diameter

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of Rupees One hundred Eighty Five

the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of Paise Eighty Four Only

removal of sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 75mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of Rupees Three hundred Nineteen

the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of Paise Forty One Only

removal of sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 110mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of Rupees Four hundred Ninety Nine

the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of Paise Forty Five Only

removal of sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 160mm Diameter

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam

or any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after Rupees One Thousand One

65 6.00 approval of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink 1,126.66 hundred Twenty Six Paise Sixty Six Nos

grout/Chemical Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter Only

for specified diameter. Holes shall made by authorised approved agency. (a) holes from 100 dia.

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam

or any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after Rupees One Thousand Four

66 4.00 approval of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink 1,463.49 hundred Sixty Three Paise Forty Nos

grout//Chemical Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter Nine Only

for specified diameter. Holes shall made by authorised approved agency. (b) holes from 150 dia.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

SS RAILING : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, solid bar, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist Rupees Two Thousand Nine

67 39.00 slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of 2,960.95 hundred Sixty Paise Ninety Five Rmt

stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.). Only

Contractor shall prepare shop drawing based on design, and get approved. Sample/ mockup shall be approved by

Providing and Placing of Manual Roller blinds having Aluminum Roller tube along with fabric pasted on it with glue

having control unit for manual operations and bottom bar Aluminum powder coated for weight purpose, Rupees Nine hundred Eighty Seven

including fabric, fitting & accessories of approved make & colour etc. complete.Vista/Hunterdouglas or equivalent. Paise Twenty Eight Only

Fabric to be approved by architect

White washing with lime on wall surface (three coats) to give an even shade incl. thoroughly brooming the surface

Rupees Nineteen Paise Ninety

69 201.47 to remove all dirt, dust, mortar drops and extra subsequent coat of white washing with lime on wall surface. 19.92 Sqmt

Soft Board : Providing and fixing on wall 12mm thick approved quality soft board with cotton cloth/fabric of

approved make and shade on 12mm thick IS 710 MR Grade ply with 19mm x 25 mm thick Ghana teak wood

beading all around including semi glossy PU polish, as approved sample and as directed by Architect. The work

shall be measured & paid in Sqm. for all floors, all level and at all heights including all costs, The rate shall be Rupees Three Thousand Sixty

inclusive of lacquer polish to all the exposed wooden members. Only the clear elevation area of the cloth/fabric Paise Forty Six Only

shall be measured and paid.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

ACP sheet Paneling with groove pattern : Providing & laying in line and level minimum 4 mm thick ACP sheet

(selected by architect/EIC and sorted for its uniform colour and thickness) premium ACP sheet cladding of

approved shade and quality & using Special Aluminium Profile Appropriate to resist wind load & dead load with

main frame & sub frame with aluminum bracket & anchor fastner of hilti or other eqivalent brand each & every

stone will be individualy fitted so that any stone can be removed & replaced as & when require. ACP sheet should

be continiously supported in full length at top & bottom.Internal wired finished or mala finished plastered

surfaces or required fabrication up to 300 mm ( in scope of contractor) , as per drawing and suggestion of Rupees Three Thousand Two

71 20.00 Architect/EIC The rate shall also include for necessary IS grade approved ACP sheet façade HC-SF-R SS clamp of 3,234.42 hundred Thirty Four Paise Forty Sqmt

304 hybrid grade.The clamp weight shall be minimum 250gms. Clamp body shall be of 304 grade wherein pin, Two Only

externally threaded rod, internally threaded tube shall be of 316 grade. The clamp body shall be of minimum 5mm

thickness and shall be able to carry a dead load of 79.5 kgs at minimum offset.The clamp shall be available with

variable off set lengths from 50-65mm and 80-120mm.

Test certificate shall be submitted by the manufacturer, The rate shall be inclusive fixing anchors HRD HR2 of

mm dia. (100 mm long). anchors (Nut Version) HSA of size M10 (90 mm long) of HILTI India Pvt Ltd. medium duty

Hybrid injection adhesive of Methacrylate resin which should be styrene free and used for Anchor fixing in Dry

conditions with HY 70 + HAS E rods of dia. M6 / M16of HILTI India Pvt Ltd The quoted rate are also including

cleaning, polishing, and scaffolding etc complete at all heights, all places, and all shapes as per drawings and

including laying in desired design and pattern and as per approved drawing or as directed by the EIC/Architec

Rate to be inclusive of water based Silicone paint of Downcorning , Kerakoll as per approved make list on stone

surface as per approved sample by Architect/Client. Rate to be inclusive of all material, wastage, necessary tools

tackles etc for fixing at all heights and for all floors. Clear laid area shall be measured & paid in sqm.grid size will

be of cutting,polishing & grooving will be in contractors scope vertical groove will be of 6mm beetween two sheet

to be kept open for rain scren principle & or may be sealed by dow corning appropriate grade silicon ( non stain

type ). ( Elevation area)

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

Rupees Nine Thousand One

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle

72 275.55 9,108.48 hundred Eight Paise Forty Eight Qui.

cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

GALLERY AREA DISPLAY/STORAGE With Glass, Depth +600mm (Type-02) : Providing, making and fixing storage

with Glass shutter / Shelf, etc units in position as per reference drawings. Storage made from IS 710 MR Grade

mm thick and 12 mm ply , finish with veneer both side as per approved make and shade Solid+Glass Shutter: shall

be made from IS 710 MR Grade 19 mm thick ply with both side veneer finish with approved locking arrangment

system. Ply shutter with refrences image, sample, Detail Drawings and as per architect / EIC instruction. made Rupees Seventeen Thousand

73 21.60 from aluminium SS finish profile (olive or eqvilant approved make) with 4 mm th toughned glass with glass film 17,753.19 Seven hundred Fifty Three Paise Sqmt

finish with require all necessary accessories And locking arrangment system Shelf: as instruction of Employer's Nineteen Only

representative/ Employer making and fixing shelf from IS 710 MR Grade ply finish with both side approved 4 mm

thick veneer with PU polish. (Mode of Measurements: Only the one side elevation area shall be measured & paid,

Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950 mm x 150 to 600 mm L shape made

of 19mm thick ply as per IS 710 MR Grade and beading of 1.0 mm thick Laminate for curtains/ blinds/ projection

screen of openings. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails, adhesives, Rupees One Thousand Nine

74 42.00 necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc finish with 1,931.69 hundred Thirty One Paise Sixty Rmt

veneer semi gloss PU finsh. (Mode of Measurements: Only the palmet length shall be measured & paid for the Nine Only

items in which palmet work is not inclusive in item description)

Height adjustable SS Top Round Stool Supplying and placing of stool with Overall Dimension:Diagonal Leg Dia S38

mm H470 min-6S5max. Top plate:SS 304 made sheet with spin section of thickness 1mm & should be non

corrosive. It should have a diameter of 305mm, Seat base:seat base is made of MS ring and rectangular tube.

Screw:EN8 Screw having dia of 22 mm should be used for height adjustment of the seat base. Round Hub:The hub

should be made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub should be welded with the Rupees One Thousand One

75 5.00 legs and it should accommodate and cover the lead screw mechanism. Leg Powder coating: All metal components 1,187.05 hundred Eighty Seven Paise Five Nos

should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy Only

polyester powder coating . All welding should be Co2 argon welding to minimize rusting on the welding areas.

Working load:Safe working load must be 135kg

Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To be provided with 5 Shelves. Blotless Rupees Nine Thousand Five

76 5.00 Rack made of CRCA Steel. 9,535.92 hundred Thirty Five Paise Ninety Nos

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

METAL STORAGE UNIT : Providing and Placing cupboard of size 916W*486D*1980H mm with 4 shelves. Material –

0.7mm thick (+/- 0.07mm) CRCA for shelf; 0.8mm thick (+/-0.08mm) high yield strength CRCA for doors & back;

Rupees Ten Thousand Four

0.9mm thick (+/- 0.08mm) CRCA for all other components. It should have 3 way locking mechanism with shooting

77 4.00 10,412.85 hundred Twelve Paise Eighty Five Nos

bolt & mazak handle. It should have height wise adjustable shelf With uniformly distributed load capacity per each

full shelf 40kg maximum. Finish – Epoxy Powder Coated to the thickness of 50 microns (+/-10).

FULL HT STORAGE(CARPENTORY WORK): Providing, making and fixing storage units in position as per reference

drawings. Storage made from IS 710 MR Grade 19 mm thick and 12 mm ply , finish with 1 mm thick laminate

both side as per approved make and shade Solid Shutter: shall be made from IS 710 MR Grade 19 mm thick ply

with both side 1 mm thick laminate finish with approved locking arrangment system. Ply shutter with refrences Rupees Seven Thousand Six

78 6.48 image, sample, Detail Drawings and as per architect / EIC instruction. made from aluminium SS finish profile (olive 7,624.75 hundred Twenty Four Paise Sqm

or eqvilant approved make) with require all necessary accessories And locking arrangment system Shelf: as Seventy Five Only

instruction of Employer's representative/ Employer making and fixing shelf from IS 710 MR Grade ply finish with

both side approved 1 mm thick laminate.

Providing and Placing High Back Chair the seat and back are made up of 1.2cm.thick hot pressed plywood and

upholstered with leather and moulded Polyurethane foam.VERY HIGH BACK SIZE: 53.0cm. (W) X 95.4cm. (H)SEAT

SIZE: 54.6cm. (W) X 49.0cm. (D)The chair has360 degree Revolving type , Front pivot synchro tilt mechanism, 5-

position locking with anti-shock back mechanism The HR Polyurethane foam is moulded with density=45+/-2 kg/m

cube and hardness load 16+/-2 kgf as per IS:7888 for 25% compression. The seat and back are arrested together Rupees Seven Thousand Four

79 2.00 with a 9.0cm. (w) spine made of 0.8cm thk. HR steel. The armrest tube assy. is made of 2.54cm x 0.16cm . M.S. 7,455.82 hundred Fifty Five Paise Eighty Nos

E.R.W. support tubes and Chrome plated.The armrest top is made of ABS & upholstered with foam & leather. The Two Only

pedestal is made of die-cast aluminium with buffing finished. It is fitted with 5nos. twin wheel castors. The

pedestal is 67.0cm pitch-center dia ( 77.0 cm with castor). The twin wheel castors are injection moulded in Black

Providing and Placing Visitor Chair -The seat and back are made up of 1.2cm.thick hot pressed plywood

upholstered with leather and moulded Polyurethane foam.MID BACK SIZE: 53.0cm. (W) X 73cm. (H)SEAT SIZE:

54.6cm. (W) X 49.0cm. (D)The HR Polyurethane foam is moulded with density=45+/-2 kg/m cube and hardness

Rupees Seven Thousand One

load 16+/-2 kgf as per IS:7888 for 25% compression. The fixed type mechanism is made with a 0.8 cm thk HR Steel

80 10.00 7,103.33 hundred Three Paise Thirty Three Nos

spine-welded to it and black powder coated(D- FT 40-60 microns-).The Understructure is made up of M.S.E.R.W.

Elliptical tube of size 4.5 x 1.9 cm x 0.25 cm welded to M.S.E.R.W Tube of dia 1.6 cm x 0.2 cm thick.The

understructure is powder coated ( DFT 40-60 microns ) in Silver metallic gray.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Low Height Storage Unit Size 900mm x 450mm x 1200mm Providing and Placing Low Height with top 25mm

overall thickness made from 18 mm thick Pre-laminated Particle board.All the edges are sealed with 2 mm thick

PVC edge band all around, Side and drawer made of 18mm thick Pre-laminated Particle board finish All the edges

Rupees Twenty One Thousand

are sealed with 2 mm thick PVC edge band all around, of approved shade. lock with Two keys and shutter fixed

81 4.00 21,453.41 Four hundred Fifty Three Paise Nos

with auto hinges including . all necessary fixtures and fastening as approved and back of the unit with 6mm thick

Pre-laminated Particle board of approved shade including all materials and labour etc. Complete as per drawing

and instruction of Engineer-in charge . Low Height Storage Size 900mm x 450mm x 1200mm

Table -1800X1200X750mm : Work top-Made of 25mm thick MDF-one side pre-laminate board conforming to

IS-14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access

flap provided for access to power supply and data cables.

Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2

grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Rupees Thirty Thousand Three

82 1.00 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product 30,315.15 Nos

hundred Fifteen Paise Fifteen Only

has a knock-down construction.

Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60

microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor

Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual

Cables(eg. HDMI,VGA-A,etc).

WORKSTATION TABLE (TYPE-01) : Providing and supply Work Table with MDU : Top 25 mm thick Prelam Particle

Board with 2 mm thick PVC edge bidding finish. Legs: Open type legs 50 x 50mm CRCA Pipe Under structure

Metal powder coated finish. Appron M.S. Perforated Sheet with powder coated finish. Metal MDU three Drawer

powder coated finish. with four Castor with lock and nessary hardware.

Side Table : Top 18 mm thick Prelam Particle Board with 2 mm thick PVC edge bidding finish, with shutter 18mm Rupees Forty Thousand Four Paise

thick Prelam Particle Board with 2 mm thick PVC edge bidding finish, shutter hanging on auto hinges with multi Eight Only

lock and handle etc all necessary hardware.

Main Table : 1500(L) x600(W) x 750 (H)mm

Side table - 900 (L)x 450(W) x +750 (H)mm

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Autopsy Table : Providing and Placing ELECTRO HYDRAULIC Autopsy Table is manufactured from 304 Grade

Stainless Steel material Autopsy Table is also known as Dissection table and Post Mortem Table This table is

equipped with height adjustments. These Tables provide efficient and smooth working surface to the Surgeons It

is an advance table which provides efficiency in autopsy procedures. Autopsy tables have clean, hygienic platform

for performing autopsy procedures. These tables have large radius inside corners for easy clean up The table is

Mounted on central supports column. Autopsy Table Electro Hydraulic is Remote controlled height adjustable

Rupees One Lakh Thirteen

from 75 to 100 cm It has Double bowl sink It comes with regulated sprinkler systems for table surface ensuring

84 6.00 113,197.47 thousand One hundred Ninety Nos

continues self-cleaning. It has reverse-flow Hydro aspirator with built in vaccum breaker. The electrical outlets are

Seven Paise Forty Seven Only

splash proof Electro Hydraulic Autopsy Table has 4 perforated divisions for body support grid plates. It comes

with Hand shower. The down-draft ventilation cone system is incorporated for minimization of odors if attached

to external ventilation source. We are Manufacturer, Exporters and Suppliers of Autopsy Table at wholesale

competitive prices from India. (Required Mini.size : 0.90 x 2.25mt)

Waiting 3 seater Gang Seater : Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated

regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- 0.014 cm size. Legs to be chrom plated made

Rupees Fourteen Thousand Eight

of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from cold rolled M.S.

85 8.00 14,809.63 hundred Nine Paise Sixty Three Nos

Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid

steel 3.0 cm +/- 0.03cm x 1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be assembled on the

cross beam with help of M8 Bolts.

Supplying and Placing Welded Pedestal made 0.8 0.8 CRCA for the body shell, Drawer front and tray, Front Side

Stiffener, Rear Side Stiffener and bottom, 1.2 CRCA for Top and Bottom Stiffener. Drawer front should be metal.

All drawers with double extension precision ball slide. Locking should be 10 lever cam lock and central RH locking

with actuator and lock channel mechanism for Box-Box-File. Castor should be swiveling non-lockable castors Rupees Four Thousand Eighty

mounted below File drawer to avoid toppling of unit when file drawer is pulled out. Finish to be Epoxy Polyster Eight Paise Forty Eight Only

Powder Coated to the thickness of 50 microns (=/-10)for of FULL HT FREE STANDING METAL FRONT 3DR = 2BOX+

1FILE OF SIZE 390 MM W X 435 MM D X 646 MM HT CENTRAL LOCKING.

Direct Bought Out Item : Providing and Placing of Dust bin of approved brand Sintex,kich or equivalent (as per Rupees Eight hundred Thirteen

photographs)of 5 Liter Capacity Paise Five Only

Providing and fixing Sainless steel signage plate of 1.5mm thick with laser print/ etching and filled with duco paint Rupees Seven Thousand Three

88 0.90 of approved make including fixing to the wall or door with required acessories and as specified type including 7,349.72 hundred Forty Nine Paise Seventy smt

fixing etc complete as directed by engineer in charge Two Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Signages : Providing and fixing of the following signages using make of cosign or equivalent approved make by

architect.All the detailed work out as per the detailed drawing and instruction of Employer's representative/

Employer.,specifications and drawings as indicated there in to all heights and elevation including necessary

scaffoldings / supports /permanant fixing with cement mortor if fixed to ground etc complete in all respects.The Rupees One Thousand Eight

89 3.00 Signage cost should be inclusive of panels,hanging system,bridges,primary & secondary 1,830.52 hundred Thirty Paise Fifty Two Nos

fixings,vinyl,painting,powder coating self glowing mateial as directed etc.All shop drawings and coordination with Only

other services is in scopeof contractor.( At all floor) Size (150 x 600mm) - FACE /WALL MOUNTED NAME

PLATES/SIGNAGES/INFORMATION SIGNAGES (with back lit)

Wall Painting (Canvas painting ): Providing & fixing painting made from canvas painting Canvas –suitable for oil

and acrylic paints. The 100% cotton plain-woven canvas 1 mm thick laminatewith UV protection, abrasion &

chemical resistance.with require stretching and/or framing.work approved by Architect.The art work shall be

hanged on the wall using heavy duty approved key-hole chaplas The concept of the painting work will be

Rupees Fourteen Thousand Five

sugeested by architect and interior designer and based on that offers from the artists to be invited for design and

90 1.44 14,518.75 hundred Eighteen Paise Seventy Sqmt

execution of the painting. The selection of the artist is to be done by architect and interior designer only. Main

contractor is bind to follow the methodology suggested by architect and interior designer to be followed for

development of commissioned art work.Rate are inclusive of artist appointing by main contractor. ( Paintings

Inauguration Plate : Providing & fixing inauguration plate (Takhti) made from +18 mm thick Granite with

embossed/engraved text letters made from SS 304 grade of various sizes

1. The fonts and letters shall be as per the reference drawing made from SS 304 with national Emblem Logo The

work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample Rupees Seven Thousand Four

91 2.40 approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of 7,462.88 hundred Sixty Two Paise Eighty Smt

all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all Eight Only

places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional

claims will be entertained for this.

Providing and Fixing the S.S. 304 Letters with back light of given size as per Architect's drawings and approved

sample or make (Approx Height of each letter 18 to 24 inches) along with all necessary hardwares, scaffolding,

Alu/MS Back support, hanging support and accessories, The rate shall be for complete item inclusive of all Rupees Twenty One Thousand

92 12.00 material, labour, wastages, necessary tools & tackles, for all floors, all heights, all levels and all places within 21,708.44 Seven hundred Eight Paise Forty Each

campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be Four Only

entertained for this. (Consider Letter : AUTOPSY BLOCK)

PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures with Rupees One Thousand Four

93 5.00 hydraulic testing complete as per design, drawing and instruction of site incharge. 25mm Dia Control Valve 1,451.88 hundred Fifty One Paise Eighty Nos

(Make: Zoloto, VB,SANT or Equivalent) Eight Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib Tap. (i) Rupees One Thousand Nine

94 11.00 15mm dia. Jaquare Opal Prime OPP 15037PM or Equivalent (Make :- Jaquar, Hindware , Parryware or Equivalent). 1,999.80 hundred Ninety Nine Paise Eighty Nos

Providing and fixing SS Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook Rupees One Thousand Five

95 2.00 including all fittings complete. (Jaquare Code : ALD-573 or Equivalent)(Make :- Jaquar, Hindware , Parryware or 1,585.70 hundred Eighty Five Paise Seventy Nos

Equivalent). Only

Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures (Angle Cock) with hydraulic Rupees Two Thousand Two

96 15.00 testing complete as per design, drawing and instruction of site incharge. (Code : Jaquare CON-1081KN or 2,268.46 hundred Sixty Eight Paise Forty Six Nos

Equivalent) (Make: Jaquare, Cera, Hindware, Somani) Only

Providing and fixing white glazed vitreous china wall mounting type (European type) water closet with C.P. bolts,

nuts, C.I. Chair or other hanging arrangement, white solid plastic seat with lid, C.P. brass hinges and rubber

buffers, Metropole flush valve reguler 40mm size (concealed body) with exposed shut off provision , C.P. brass

Rupees Ten Thousand Nine

screws and washers complete, including cutting and making good the walls floors where required. Wall hung EWC

97 2.00 10,945.86 hundred Forty Five Paise Eighty Six Nos

(Jaquare - VGS-WHT-81953UF), (FLV-1093N - Metropole Flush Valve) & (FLV-1071 - Concealed Flush Valve

Complete) matching white plastic seat with lid & CP brass hinges & CP push plate or Equivalent Model . (Make :-

Jaquar, Hindware , Parryware or Equivalent).

Providing and fixing White glazed vitreous Wash Basin Round Over-Counter, size 450 mm dia., with supporting in

stone flooring, 1 no, 32 mm CP Bottle trap with extension piece to wall flange with rubber adopter for waste Rupees Five Thousand Eight

98 2.00 connection,1.2m Flexible Pipe [1No] and waste coupling. Etc complete. Wash Basin Table Top - 420x420x155 mm 5,819.62 hundred Nineteen Paise Sixty Two Nos

(CNS-WHT-905 or Equivalent) (Make : Jaquar, Hindware, Cera, Somani) Only

Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with necessary fittings etc. complete. etc Rupees One Thousand Seven

99 2.00 complete as per suggestion of Architect/EIC. (Make: Jaquare, Cera, Hindware, Somani) 1,750.33 hundred Fifty Paise Thirty Three Nos

Providing and fixing TOWEL RING SQUARE , as approved by the architect.Work complete including all type of

Rupees Nine hundred Seventy

100 6.00 fittings , etc complete as per suggestion of Architect/EIC. ( Code : ACN-1121BN) (Make: Jaquare, Cera, Hindware, 970.61 Nos

Paise Sixty One Only

Providing and fixing SOAP DISH HOLDER as approved by the architect.Work complete including all type of fittings

Rupees Seven hundred Fifty Nine

101 3.00 etc complete as per suggestion of Architect/EIC. (Code : ACN-1135N or Equivalent) (Make: Jaquare, Cera, 759.52 Nos

Paise Fifty Two Only

Hindware, Somani)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal

Rupees Six hundred Twenty Eight

102 8.00 diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making 628.19 Each

Paise Nineteen Only

good the walls.

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin / Rupees Two hundred Ninety Five

Sink & Urinal. Paise Eighty Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush Rupees One Thousand Seven

104 2.00 pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. 1,714.83 hundred Fourteen Paise Eighty Each

Providing and fixing Kitchen sink with C.I. Or M.S. brackets, painted white including cutting holes in walls and Rupees Two Thousand Three

105 6.00 making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 2,326.66 hundred Twenty Six Paise Sixty Six Each

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or Rupees Eight hundred Fifty Nine

plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. Paise Forty One Only

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and Rupees Three Paise Ninety Five

connection etc. complete on terrace Only

Dismantling of all MEP services item including wire, cable, conduit, duct, cable tray, light fixture, grills, AC unit,

fan,MCB,switch board,computer point, Panel, blanke plate,plug point fire pipes,all type CCTV, all type Speaker,

Rupees Fifty Eight Thousand

108 1.00 all type detector, equipments, accessories etc, for all ELectrical, HVAC (AC work), Fire & ELV item and all level, all 58,075.00 Job

Seventy Five Only

height as directed by Engineer in charge. (FORENSIC PM ROOM)

109 20.00 Credit Value for Door with Frame (Any type/Material of door and Frame) (404.00) Rupees Only Nos (8,080.00)

110 10.00 Credit Value for Window with Frame (Any type/Material of window, Ventilation and Frame) (303.00) Rupees Only Nos (3,030.00)

111 2094.40 Credit Value for CI Pipe/GI Pipe / PVC Pipe/ MS Pipe,etc..... (30.30) Rupees Paise Only Kg (63,460.32)

112 6.88 Credit Value for MS, Brass CP Fitting Scrap (20.20) Rupees Paise Only Kg (138.98)

113 112220.00 Credil Value for Bricks (2.02) Rupees Paise Only Nos (226,684.40)

114 175.89 Credil Value for Kota Stone (90.90) Rupees Paise Only Smt (15,988.40)

115 87.95 Credil Value for Tiles (25.25) Rupees Paise Only Smt (2,220.74)

116 23161.00 Credil Value for Steel, GI Sheet & Mild Steel (MS) (15.15) Rupees Paise Only Kg (350,889.15)

TOTAL (Civil , Interior & Plumbing Fixture) Rupees Only (A)

WATER SUPPLY : Providing and fixing, in proper line and level (with necessary support like, brick masonry

pedestals and battens, if necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per

ASTM D-1785, of Astral or equivalent, Open & Conceal piping, complete, including jointing with rubbering and

airtight joints, with necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), Rupees Seventy Two Paise Sixty

reducer (single stage, double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing Five Only

material, including testing, cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines

as per drawing & specification. 15 mm

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral

or equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with

Rupees One hundred Ninety Eight

118 1.00 necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, 198.97 Rmt

Paise Ninety Seven Only

double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing &

specification. 20 mm

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral

or equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with

Rupees Ninety One Paise Eighty

119 20.00 necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, 91.84 Rmt

double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing &

specification. 25 mm

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral

or equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with

Rupees One hundred Nineteen

120 3.00 necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, 119.15 Rmt

Paise Fifteen Only

double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing &

specification. 32 mm

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral

or equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with

Rupees One hundred Forty Eight

121 1.00 necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, 148.12 Rmt

Paise Twelve Only

double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing &

specification. 40 mm

Providing and fixing, in proper line and level (with necessary support like, brick masonry pedestals and battens, if

necessary) to floor, approved quality, heavy duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral

or equivalent, Open & Conceal piping, complete, including jointing with rubbering and airtight joints, with

Rupees One hundred Ninety Five

122 1.00 necessary specials, couplers, elbow, equal tees, tail piece, adapter (both male and female), reducer (single stage, 195.67 Rmt

Paise Sixty Seven Only

double stage and triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor etc. Testing & installation of pipe lines as per drawing &

specification. 50 mm

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making

123 3.00 205.00 Rupees Two hundred Five Only Rmt

good the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Water & RO Water, 20 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

124 2.00 approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and 909.00 Rupees Nine hundred Nine Only Nos.

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 15 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

Rupees One Thousand Eight

125 2.00 approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and 1,818.00 Nos.

hundred Eighteen Only

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 25 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of Rupees Two Thousand Seven

126 2.00 approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and 2,777.50 hundred Seventy Seven Paise Fifty Nos.

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 32 mm Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS

Rupees One Thousand Eight

127 1.00 with screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore 1,818.00 Nos.

hundred Eighteen Only

(NB) size: 25 mm

INTERNAL DRAINAGE : Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit &

Self Fit, Supreme or equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or

soil waste pipe, with necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including

plugs, shoes, cowls, flange compression type fittings, wall clips, in proper line and level with necessary support like

brackets/clamps, clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed Rupees Eight hundred Fifty Six

complete jointing with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing Paise Three Only

material, including testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines

as per drawing & specification. 110 mm. (Soil + Waste + Rain Water) - Type B

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing Rupees Two hundred Eighty Paise

129 3.00 with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including 280.23 rmt

Twenty Three Only

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 75 mm. - Balcony + Standing Balcony + AC Drain - PVC 10 KG

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

Rupees One hundred Twenty

130 4.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing 127.36 rmt

Seven Paise Thirty Six Only

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 40 mm for waste water for Sink - PVC 10 KG

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes - Ring Fit & Self Fit, Supreme or

equivalent make, Confirming to IS 13592 & Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and double), including plugs, shoes, cowls,

flange compression type fittings, wall clips, in proper line and level with necessary support like brackets/clamps,

Rupees One hundred Twenty One

131 4.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, open or concealed complete jointing 121.97 rmt

Paise Ninety Seven Only

with rubberising and airtight joints, with ‘T’ shaped rubber ring, etc., and lubricant or jointing material, including

testing, cutting, making good the wall, ceiling and floor, etc. Testing & installation of pipe lines as per drawing &

specification. 32 mm for waste water for Wash basin - PVC 10 KG

Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of self cleansing design with water

seal not less than 50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in

proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting

132 2.00 the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of 606.00 Rupees Six hundred Six Only

following sizes: 110 x 110 mm OD inlet / outlet

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as

Rupees Four hundred Nineteen

133 2.00 approved, (cockroach trap) including setting in floor with cement mortor to match with floor finish as per 419.15 no

Paise Fifteen Only

architect requirements.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for soil, waste and rain water Pipes at Rupees Five hundred One Paise

top level / terrace level, as specified and required, etc. complete. 110 OD PIPE Eighty Seven Only

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for soil, waste and rain water Pipes at Rupees Three hundred Eighty Nine

top level / terrace level, as specified and required, etc. complete. 75 OD Paise Seventy Four Only

EXTERNAL DRAINAGE : Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

Rupees Three hundred Fifty Six

136 3.00 pressure pipes I.S., class NP2 of the following internal diameter with collars and butt ends prepared for collar 356.73 rmt

Paise Seventy Three Only

joints including testing, of joints complete. 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S., class NP2

Rupees Two hundred Fifty Four

137 10.00 of the following internal diameter with collars and butt ends prepared for collar joints including testing, of joints 254.89 rmt

Paise Eighty Nine Only

complete. 150 mm

Providing, fixing, jointing and testing salt glazed stoneware Gully trap, class `A', including excavation in all soil

types, bailing or pumping out water from trenches, shoring whenever necessary testing,refilling, in layers

ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of

100 meters as directed, incl. embedding the trap in CC 1:2:4, construction of brick masonry chamber, internal

clear size 300 mm. x 300 mm., in brick work 230 mm. thick, in CM 1:4, plastering inside, outside and all exposed

Rupees Three Thousand Eight

138 2.00 surfaces with CM 1:3, 12 mm. thick, with 300 x 300mm Gully trap chamber & providing, fixing CI frame and cover 3,806.53 no

hundred Six Paise Fifty Three Only

300 x 300 mm., weighing together not less than 12.5 Kg., painting of all CI items with 3 coats of approved

bitumastic paint, etc. Complete.of the following diameter size:

salt glazed stoneware gully trap, class `A', of 150 mm. dia. inlet and 150 mm. outlet,

Cast iron cover 300 x 300, Gully trap Brick chamber 300 x 300 x

Constructing Inspection chamber 450 x450 x 600 mm clear size in 230 mm thick brick masonry with cement

mortar (1:5) as per ISI with 150 mm thick 1:3:6 P.C.C. bedding, necessary benching in concrete (M-15) and 20 mm Rupees Two Thousand Five

139 1.00 thick smooth cement plaster (1:4) from inside, C.I. steps as necessary and rough cement plaster 20 mm thick in 2,545.86 hundred Forty Five Paise Eighty Six no

c.m. 1:4 outside, with 50 kg. Full size C.I. manhole cover and frame (Approved Make) including all excavation in all Only

soil types, refilling sides in layers with selected earth ramming and consolidating, removing away surplus soil or

dumping it on site as directed (Depth upto 1500 mm to invert).

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

Rupees Seven Thousand One

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

140 2.00 7,180.44 hundred Eighty Paise Forty Four no

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe lines with three or more inlets.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Extra over and above item no. beyond 1.5 m. depth, for every additional depth of 0.1 m. or part thereof, for

Rupees Three hundred Twenty

141 2.00 brick masonry Inspection chamber. 325.59 no

Five Paise Fifty Nine Only

Providing and fixing CI Cover manhole frame and cover 455 x 610, light / medium / heavy weight,Circular /

rectangular tested as per IS:1726 for load bearing.The cover is to be provided with a 5mm thick high abrasion Rupees Nine hundred Sixty Five

surface.The cover is to be of double seal type with SS 316 Socket type key hole lifting / Rod lifting arrangement . Paise Forty Nine Only

The lifting arrangement is to be closed from the bottom side. etc. complete as directed by E-I-C.

UTILITY ITEMS : Installing, testing and commissioing of Pump system comprising of horizontal Submersible

Pumps with SS casing, SS impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm

speed and shall be supplied with all accessories viz., base plate, coupling, motor, VFD based control panel, dry run Rupees Thirty Five Thousand

& overload protection, cabling up to panel, earthing, GI medium duty suction, delivery & header pipes, pressure Three hundred Fifty Only

gauge, pressure switches, pressure transmitter, suction ball valves & delivery ball valves & check valves etc.,

complete. 100 lpm., 40mtr., (To GROUND FLOOR TO TERRACE TANK) FOR DOMESTIC WATER

Supply, installation, testing & commissioning of Water level controller for the OH tanks with switches, hardwares, Rupees Ten Thousand One

interlocking with panel, etc. For Under Ground tank & OH Tank hundred Only

TOTAL (Plumbing Work) Rupees Only (B)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

FIRE PUMPS, EQUIPMENT, PIPING, VALVES & ACCESSORIES

Electric Motor Driven Hydrant Pump : Supplying,Installing, testing and commissioning of Fire authority approved

Electrical driven fire pump suitable for automatic/ manual operation consisting of the following-Rates for erection

Horizontal split casing, high pressure, single/ multistage centrifugal type fire pump having cast iron body, bronze

impeller,stainless steel shaft & capable of delivering 900 LPM against a total head of 30Mtr while running at

RPM complete with proper connection to suction and delivery line, and including bypass arrangement for testing

of pumps as per the requirement. Suitable mechanical seal with mounting aggangement shall be included, having

a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Y Stainers at

pump input shall be provided as per manufacturer requirements. Pump shall be capable of furnishing not less

than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120%

of rated head. Squirrel cage, induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of

Rupees One Lakh Eighty One

145 1.00 suitable HP rating for the above pump with synchronous speed of 2900 RPM conforming to IP 55 protection & 181,800.00 set

class 'F' insulation. The motor shall conform to IS 325 1978 (up to date) with flexible coupling and coupling guard . thousand Eight hundred Only

Factory Fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as per

manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty). Grouting bolts to be

provided and installed by vendor at his cost, Flexible Coupling and coupling guard for direct coupling of pump and

motor. Drain Pipe with Valve

Discharge : 900 LPM

Pumping Head : 30 M

Pump Size : 20 HP

Rate should included interconnection cables and Cable box if reqd for cable conn. to motor.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Electrical Motor Driven Jockey Pump For Hydrant System Location - Plant Room-Rates for erection of pump only,

Supplying,Installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable

for automatic/manual operation consisting of the following:

Horizontal / Vertical mounted multistage jockey pump having cast iron body, S.S. impeller, stainless shaft with

mechanical seal capable of delivering 600 LPM against total head of 110Mtr while running at 2900 RPM complete.

The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side

including bypass arrangement for testing of working of the pumping set as required. The pump should meet the

requirement of IS 15105:2002 and must be approved by the local fire authority. Y-Stainers at pump input shall be

provided as per manufacturer requirements. Squirrel cage induction motor suitable for 415 + 10%V, 3 phase,

Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type

Rupees One Lakh Forty Six

146 1.00 connected to pump with flexible coupling and coupling guard . With Pressure Guage and Pressure switch. Factory 146,450.00 set

fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as per thousand Four hundred Fifty Only

manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) . grouting bolts to be

provided and installed by the vendor at his cost,

Suitable reinforced cement concrete pump foundations as per manufacturer's design including foundation bolts,

washers as required. Drain pipe with valve (25 mm dia)

Discharge : 600 LPM

Pumping Head : 110 MTR

Rate shall include inter connecting cables and cable box if reqd for cable conn to motor

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with star delta or as per CFO

approved starters rated to suite pump HP with necessary protection feautres like SPP / ELR / OL / SC / phase and

on off indicating lamps. The busbars shall be of Al - 0.8 A / sq mm size. Panel shall be fabricated from 14G sheet

steel with seven tank process powder coated and shall be min IP 52. Panel shall have Ammeter / Voltmeter and

KWh meter. Cabling / earthing from panel to pump shall be scope of vendor without any extra cost. Cabling -

supply / laying and terminating, shall be Al XLPE armoured / Cu XLPE armoured / as per manufacturers

specifications with necessary terminal box to terminate the cables. Panel shall be rated min for 25KA fault level. Rupees Two Lakh Twenty Two

Cable trays - hot dip GI ladder type 16 gauge with required supports shall be used for cabling. Panel shall have one thousand Two hundred Only

incomer MCCB / ACB of required rating where by incoming supply and earthing shall be terminated by electrical

contractor.Starters shall be suitable for respective motors.panel to take inputs from pressure switch/on-off switch

. Flow switch wiring shall be in suitable mms pvc consuits. Panel should be manufactured by CPRI approved panel

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying,Installing, testing & commissioning of dial type Pressure Guage having 100 mm dial & range of 0-15 Rupees Two Thousand One

148 2.00 Kg/cm2 with syphon and cock. 2,151.30 hundred Fifty One Paise Thirty Each

Supplying,Installing, testing & commissioning of Pressure Switch required accessories Rupees Two Thousand Twenty

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Four Thousand Eight

150 1.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 150 mm dia 4,848.00 Each

hundred Forty Eight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Three Thousand Eight

151 3.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 80 mm dia 3,838.00 Each

hundred Thirty Eight Only

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS:

Rupees Five Thousand Two

152 1.00 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 80 mm dia. 5,252.00 Each

hundred Fifty Two Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees One Thousand Four

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

153 125.00 1,424.10 hundred Twenty Four Paise Ten Mtr.

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. 150 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Nine hundred Forty Nine

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Forty Only

testing after Installation etc. as per specifications complete as required. 80 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Five hundred Eighty Five

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Eighty Only

testing after Installation etc. as per specifications complete as required. 50 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed /screwed /welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Four hundred Ninety Four

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Ninety Only

testing after Installation etc. as per specifications complete as required. 40 mm

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed /screwed /welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Four hundred Forty Nine

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Forty Five Only

testing after Installation etc. as per specifications complete as required. 32 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed /screwed /welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Two hundred Fifty Two

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Fifty Only

testing after Installation etc. as per specifications complete as required. 25 mm

Supplying,Installing, testing & commissioning of Weather proof standard fire hose cabinet (750 mm x 600 mm x

300 mm deep) made out of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm

thick glass) shutter including necessary locking arrangement by allen key, stove enamelled Fire red finish (as per IS Rupees Five Thousand One

: 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 hundred Fifty One Only

No. branch pipe & nozzle spanner (For External Hydrant).

Supply, Installation, Testing and Commissioning of Weather proof Standard Fire Hose Cabinet wall mounting type

(450 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan Rupees One Thousand Eight

key suitable for housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner. hundred Eighteen Only

Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80mm N.B. flanged

inlet, 63 mm dia female instantaneous outlet type. S.S. coupling, blankcap, chain, twist release type lug & all Rupees Three Thousand Thirty

161 2.00 accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser,orifice plate 3,030.00 Each

complete as required by the Local Fire Authority.

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per Rupees Three Thousand Two

IS:903) of 63 mm dia and 15 mtrs long. hundred Thirty Two Only

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern aluminium short branch pipe

163 2.00 808.00 Rupees Eight hundred Eight Only Each

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising

of hose reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, Rupees Four Thousand One

painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire hundred Forty One Only

Supply, installation, testing and commissioning of SS Ball Valve.(a) 25mm dia

165 2.00 808.00 Rupees Eight hundred Eight Only Each

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, installation, testing and commissioning of Cast lron Two Way Fire Brigade Inlet as per IS:904 having

Rupees Three Thousand Five

166 1.00 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. 3,535.00 Each

hundred Thirty Five Only

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 Rupees Three Thousand Five

mm (For Riser) hundred Thirty Five Only

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. Rupees Three hundred Fifty Three

(a) Pendent Sprinkler 57°C - standard response Paise Fifty Only

Supply, installation, testing and commissioning of ABC type Fire Extinguisher of 6.0 kg confirm to IS:15683, with Rupees One Thousand Four

169 2.00 ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 1,424.10 hundred Twenty Four Paise Ten Each

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps Rupees Six Thousand Five

170 2.00 made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. 6,591.26 hundred Ninety One Paise Twenty Each

[A] For 4.5 Kg Capacity Six Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and Rupees Three hundred Fifty Three

171 2.00 specification consisting of following items Pump On / Off switch: 353.50 Each

Paise Fifty Only

4 core 1.5 sq.mm cu. Flexinble wire with pvc pipe & hardware for pump on/off switch

172 50.00 202.00 Rupees Two hundred Two Only Each

Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.)

including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as

Rupees One hundred Six Paise Five

173 50.00 directed, including two or more coats of synthetic paint over one coat of primer after surface preparation 106.05 kg

including cutting and making good walls (Structural other than pipe supoort).

Painting of above ground lines with two coats of red oxide primer and two coat of sinthetic enamal paint (PO.Red)

174 3.00 707.00 Rupees Seven hundred Seven Only Lot

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire Hydrant: 4" X 12" Rupees Two hundred Fifty Two

Paise Fifty Only

"DCP" Extinguisher: 8" X 4" Rupees One hundred Fifty One

Paise Fifty Only

"CO2" Extinguisher: 8" x 4" Rupees One hundred Fifty One

Paise Fifty Only

In case of Fire, do not use lift, use staircase: 8" x 8" Rupees Three hundred Fifty Three

Paise Fifty Only

TOTAL (Fire Fighting Work) Rupees Only (C)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Electrical Work : Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on

Rupees Four hundred Eighty Five

179 28.00 PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate 485.81 Point

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / Paise Eighty One Only

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete, Cat.III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden

Rupees One hundred Sixty Seven

180 53.00 box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp 167.66 Point

Paise Sixty Six Only

holder / ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete,

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Six hundred Seventy Four

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary Paise Sixty Eight Only

ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

Rupees Five hundred Ten Paise

182 24.00 modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a 510.05 Point

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete ,Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

Rupees Eight hundred Seventy

183 8.00 modules erected on / in wall / ceiling as per pipe erected with following type of accessories [III] For 16A Plug and 871.63 Point

One Paise Sixty Three Only

16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete,Cat-III

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Rupees Two hundred Fifty Seven

184 13.00 Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules 257.55 Point

Paise Fifty Five Only

erected on /in wall/ceiling with following type accessories. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting

Rupees Six hundred Three Paise

185 3.00 base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe 603.98 Point

Ninety Eight Only

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate , modules erected with necessary connections as Rupees Twenty Five Paise Twenty

per site situation directed by Engineer In charge. Blank Plate Single, cat III Five Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees Thirty Three Paise Thirty

following dia of pipes, in approved manner as directed. Three Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Sixty Two Paise Sixty Two

PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC Only

pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Eighty Two Paise Eighty

PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC Two Only

pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated Rupees One hundred Twelve Paise

stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and Eleven Only

accessories (a) 2 wire 4 sq. mm

Providing & erecting insulated socket 3P+N+E with Plug 32A rating which is comprised of Four pole MCB slot Rupees Two Thousand One

191 15.00 and insulated socket IP40 cat-III 2,190.69 hundred Ninety Paise Sixty Nine Each

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Lighting Fixtures ,Fan & other items : Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Rupees Five hundred Eighty Nine

192 27.00 Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % (fitting required LM-79 & LM-80 589.84 Each

Paise Eighty Four Only

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (iii) 16-20

watts, Surge-2 KV cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted

body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Rupees One Thousand Seven

Luminaire efficacy> 85 lumens/watt

193 55.00 1,794.77 hundred Ninety Four Paise Seventy Each

LED driver efficiency > 85 % (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B)LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi)36 watts,24"x24", Surge- 2KV cat-III

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < Rupees Two Thousand Eight

194 8.00 10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, 2,885.57 hundred Eighty Five Paise Fifty Each

temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over Seven Only

current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall

be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each

Rupees One hundred Eight Paise

195 8.00 side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with 108.07 Each

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen Paise Eighteen

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

Rupees Seven Thousand Two

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

197 4.00 7,266.95 hundred Sixty Six Paise Ninety Five Each

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iv) above 90 to 120 watts Cat-lll

Panel & Switchgear : Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & Rupees Six Thousand One

198 5.00 magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & 6,173.12 hundred Seventy Three Paise Nos.

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Twelve Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

Rupees Twenty Five Thousand

KA and above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to

199 1.00 25,228.79 Two hundred Twenty Eight Paise Nos.

work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing

Seventy Nine Only

16 G.M.S. housing. ICS=100% of ICU only Cat III

PANEL MOUNTING BUSBARS : Supplying and erecting triple pole & neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated

Rupees Two Thousand Two

current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current Rn.

200 50.00 2,204.83 hundred Four Paise Eighty Three

carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected Mtr

in existing cubical panel with necessary connections. (D) Suitable for 400 Amp. capacity

Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 KA breaking

Rupees Seven hundred Thirty

201 3.00 capacity & confirms to IS : 8828 in existing M.S box having following capacity: (c) 63 Amp. Cat- III 737.30 Nos.

Seven Paise Thirty Only

Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 KA breaking

Rupees Six hundred Sixty Eight

202 6.00 capacity & confirms to IS : 8828 in existing M.S box having following capacity: (b)40 Amp. Cat- III 668.62 Nos.

Paise Sixty Two Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking

Rupees Two hundred Ninety Nine

203 2.00 capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat.III 299.97 Each

Paise Ninety Seven Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of

Rupees One Thousand Nine

204 3.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following 1,969.50 Each

hundred Sixty Nine Paise Fifty Only

Max. rating erected as directed (i) 25Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Two

205 3.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following 2,235.13 hundred Thirty Five Paise Thirteen Each

Max. rating erected as directed (ii) 40Amps. DP Cat. III Only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system

Rupees One hundred Twelve Paise

206 24.00 and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark .Cat.III 112.11 Each

(3 ph DB + LDB)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity &

Rupees Five hundred Ninety Five

207 4.00 confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat.III 595.90 Each

Paise Ninety Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity

Rupees Five hundred Eighty Seven

208 11.00 & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp. Cat.III 587.82 Each

Paise Eighty Two Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Two Thousand Nine

209 1.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 2,913.85 hundred Thirteen Paise Eighty Five Each

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Three Thousand Four

210 1.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 3,412.79 hundred Twelve Paise Seventy Each

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double Nine Only

door (iii)8 way

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface

mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, Rupees Eighteen Thousand Six

211 1.00 confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three 18,664.80 hundred Sixty Four Paise Eighty Each

phase outgoing as per following .(The DBs should be used of same company of MCB to be used) (D)12 way Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Cupboards : Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

Rupees Fourteen Thousand Nine

212 15.00 grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - 14,902.55 Sq.Mtr

hundred Two Paise Fifty Five Only

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (B) The standard companies switch gear shall be used and only manufacturers

at CPRI approved factory (i) with 350mm depth

Providing and erecting ,Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors,

handles other hardware materials as per requirement design with finishing by three tank powder coating Rupees One hundred Eighty Paise

processed inside and outside painted, erected as directed including minor civil work. Seventy Nine Only

Earthing : Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of applications with chamber and

heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane Rupees Ten Thousand Five

214 4.00 mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 10,593.89 hundred Ninety Three Paise Eighty Nos.

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- Nine Only

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs, Back filling Compound :2 nos Bags of 25 Kg.

Cables : Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

Rupees Two hundred Twenty Paise

215 50.00 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 220.18 Mtr

35 Sq. mm ( 16 Sq. mm 1/2 core)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be Rupees One Thousand One

216 100.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core 240 Sq. 1,168.57 hundred Sixty Eight Paise Fifty Mtr

mm( 120 Sq. mm 1/2 core) Seven Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Rupees One hundred Fifty Three

217 45.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm 153.52 Mtr

Paise Fifty Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid

Rupees Three hundred Ninety Five

218 100.00 on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (C) 3 395.92 Mtr

Paise Ninety Two Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV.

Rupees Five hundred Ten Paise

219 395.00 to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 510.05 Mtr

cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

Rupees Two hundred Eighty Seven

220 100.00 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 287.85 Mtr

Paise Eighty Five Only

(B) 3 core 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees Thirty Eight Paise Thirty

221 40.00 complete with out going tails, insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm 38.38 Each

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees Forty Seven Paise Forty

222 5.00 complete with out going tails, insulating tape etc for following size of cables. (D) 2 to 4 core 16 Sq. mm 47.47 Each

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Seventy Five Paise

223 4.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 75.75 Each

Seventy Five Only

core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Two hundred Forty Seven

224 2.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (H) 3 & 1/2 247.45 Each

Paise Forty Five Only

core 240 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

225 80.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 6.06 Rupees Six Paise Six Only Each

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

226 16.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 15.15 Rupees Fifteen Paise Fifteen Only Each

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Twenty Paise Twenty

227 15.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 20.20 Each

manner. (D) 35/50 Sq.mm.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Eighty Five Paise Eighty

228 6.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 85.85 Each

manner. (J) 240 Sq.mm.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should

be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing

as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt Rupees Six hundred Twenty Two

and washers etc. erection with necessary support( included) as per Specification and as per instruction of Paise Sixteen Only

engineer in charge..

(5) 300 X 50 X 1.6 mm Thick

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying Rupees One hundred Thirty Seven

of cable. below ground / road surface for enclosing cable (D)120 mm outer dia. Paise Thirty Six Only

Danger Sign boards : Providing and erecting metallic vitrified danger notice board as per language suggested by Rupees Sixty Nine Paise Sixty

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. Nine Only

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer Rupees Twenty Six Paise Twenty

incharge of standard size as per IS-2551 Six Only

Miscellaneous : Providing and fixing printed instruction chart both in English and Gujarati and duly framed with

Rupees One hundred Thirty Paise

233 2.00 front glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally size. 130.29 Each

Twenty Nine Only

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Rupees Two hundred Fourteen

Paise Twelve Only

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm

Rupees One Thousand Twenty

Seven Paise Seventeen Only

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge

bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic Rupees Two hundred Ninety Nine

solution (Savlon or similar) etc. (All above contents shall be of standard makes) Paise Ninety Seven Only

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at

Rupees Two hundred Fourteen

237 4.00 bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand 214.12 Each

Paise Twelve Only

provided or hung on wall hook.

Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a

238 4.00 60.60 Rupees Sixty Paise Sixty Only Each

depth of minimum 15 cms.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Lift - DESCRIPTION OF LIFT : Note:- (a) General Features & Special Features of the all lift items shall be taken as

below. (b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to

architect /civil authority to keep necessary size of lift well.(c) The lifts of 15/ 16 and above passenger capacity shall

be taken for Hospital Lifts; Where in Description “ Stretcher Lifts” shall be mentioned. (d) The Rates of the

following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/- shall be

deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost for

the Lifts 15 and above passenger capacity as extra cost. (e) Add Rs. 80,000/- for the DUPLEX control for the lifts up

to 10 floors and add Rs. 10,000/- for additional each floor above 10 floors.

(A) GENERAL DESCRIPTION OF LIFTS. [1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift

phase 440 V A. C. Permanent Magnet Synchronous motor of proper rating with high efficiency shall be used. [2]

Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback closed loop system shall be

used for lift car and door operation which shall be full collective selective operation hall call demand response, Rupees Only -

UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls. [3]

Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety

factor of fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes

with aesthetic appearance with LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design sugeested of

engineer in charge. of engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre

opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with emergency stop device,

mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all floor switches must

be with brail language as per lift act.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening

made of hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also,

Emergency Light & Fan should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till

excess load is removed. [10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control panel. [14]

Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided. [15] Lift

machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the

lift agency, along with the other steel structure works, foundations for the machine etc… [16] In the hoist way

fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in charge.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of light points,

with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift

shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system. Rupees Only -

3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection

and provide report by third party authorized by concern licensing authority 5.agency has to provide third party

insurance upto completion of free maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible

when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall Panels in Lift Car.

[23] With Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive and all equipments

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening,

BMS/RMS with necessary online real time monitoring system having necessary connectivity for remote

monitoring & other suitable supporting hardware & software devices to fulfil the purpose. 2. Floor Indication LCD

Display with call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with MP3

Voice Announcer. 3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car

and all Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross Rupees Only -

beam door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile app and user id and

password for monitoring

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

15/16 Passengers /Strecher lift, Ground plus 1 upper floor with Rated Speed of 1.0 m/sec., (C) With General

Rupees Seventeen Lakh Seventy

PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

239 1.00 1,770,994.60 thousand Nine hundred Ninety Each

Four Paise Sixty Only

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/ Stretcher lifts having

AC2/ACVV/ACVF drives & automatic doors only. The system comprising following features & facilities.

(i) Announcing floor message, message to close period.(ii) Announcing ‘Emergency Message’ when lift is stuck

between floors due to power failure or any other reason. Rupees Seventeen Thousand One

(iii) Instrumental Music between floor announcing.(iv) Announcement in English / Hindi & Gujarati Languages.. (v) hundred Nineteen Paise Fifty Only

Flexible to accommodate special per-programmed message such as name of the building /office. (vi)Volume

adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift

with making use of sound isolated floating platform & micro switches on SI frame to get sensation of live load

inside lift cage at any given moment, with provides new fixtures of overload warning inside lift cage with new Rupees Thirty Two Thousand Five

241 1.00 relay in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional wiring 32,527.05 hundred Twenty Seven Paise Five Each

including laying of new travelling cable, include minor civil work & without changing the existing capacity speed Only

stops, travel & operation of the desired lift

Meters & Panel Accessories : Supplying and erecting approved make panel mounting type Digital Voltmeter Rupees One Thousand Two

242 1.00 having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring 1,275.63 hundred Seventy Five Paise Sixty Each

etc .with manufacturers calibration certificate. Three Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display,

Rupees One Thousand Five

external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel

243 1.00 1,558.43 hundred Fifty Eight Paise Forty Each

board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel

Rupees Three hundred Seventeen

244 1.00 board with necessary connections. 317.14 Each

Paise Fourteen Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in Rupees Two hundred Seventy Four

existing CRCA box duly secured with insulating materials connected to the meter Paise Seventy Two Only

Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder Rupees Forty Three Paise Forty

complete erected with necessary connections. Three Only

AC : Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied Rupees Fifty Five Thousand One

247 4.00 proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 55,189.43 hundred Eighty Nine Paise Forty Each

15A plug top & Remote Control & MS Stand) with necessary core cutting. (2)For ISEER Range (KWH/KWH)(4.0 to Three Only

(B) for 1.5 ton capacity- Premium Cat.

(C) for 1.7 to 2 ton capacity-Premium Cat.

Rupees Seventy Two Thousand

248 1.00 72,381.65 Three hundred Eighty One Paise Each

Sixty Five Only

WATER COOLER : Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per

hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water

Rupees Forty Nine Thousand Five

cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank

249 1.00 49,559.69 hundred Fifty Nine Paise Sixty Nine Each

surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel. ◦

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Mortuary Cabinet : Suppy, Installation, Testing and Commisioning of 6 body mortuary cabinate of approx. Force

draft type PUF Panel: 80mm thick PUF panel with both side S.S -304 grade sheet of 0.5 mm thickness & PUF

density should be 40 kg/m3 Drawer Tray: Made with high grade SS 304 box pipe. MS powder coated trolly

mechanism along with ancillary material SS Tray, Temperature: -8 C to +8 C, Door: Overlap type door with heavy

duty hinges & Handles with closer along with push type gasket for easy operation Size: 32” X 32”, Lock SS:

Individual lock & Key for each door, Identification: Each Window should be facilitated for Body Identification tag

(replaceable),Vapor proof lights, Refrigeration System: Air Cooled, Split Type and Capable to run at minimum

deg C Ambient with CFC free refrigerant gas R407C/R404A for low maintenance. Compressor Type : Hermetic Rupees Five Lakh Ninety Five

250 15.00 reciprocating/scroll type compressor, Indoor Unit: SS tube & Copper fins type Indoor Unit with SS casing capable 595,900.00 Each

thousand Nine hundred Only

to maintain low relative humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved, Power:

V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref. System should be able to achieve temperature

within 90 minutes in load condition and can retain temperature up to 6 hours in case of power loss. Control Panel:

Digital Temperature display with microprocessor-based controller with additional temperature display & alarm

indication with buzzer at mortuary Chamber surface.

TOTAL (Electrical Work) Rupees Only (D)

Rupees One hundred Sixty Three

251 11.00 DATA & NETWORKING : Supply & Installation Patch Cord [Cat6, 02 Mtr, User Side] 163.62 Ea

Paise Sixty Two Only

Rupees Two hundred Ninety Four

252 11.00 SITC of ABS back box [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 294.92 Ea

Paise Ninety Two Only

SITC of Face Plate - Single (Keystone Jack,square)

253 11.00 90.90 Rupees Ninety Paise Ninety Only Ea

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees Thirty Three Paise Thirty

following dia of pipes, in approved manner as directed Three Only

SITC of CAT6 UTP 23AWG Solid: Per Meter Rupees Forty Three Paise Forty

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer Three Only

Supply, installation, testing, and commissioning (SITC) of a 24U, 19-inch standard floor-mount rack. The rack must

be made of mild steel with a powder-coated finish and include lockable front and rear doors (front door typically Rupees Twenty Thousand Two

glass or perforated, rear door perforated), lockable and removable side panels, and a welded frame construction hundred Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, Testing, and Commissioning (SITC) oF 1U horizontal cable manager for a 19-inch rack, made of

powder-coated steel with a black finish. The manager shall feature multiple D-rings, typically 5 to 7, to provide Rupees Two hundred Eighty Two

organized routing and support for patch cables. The design should facilitate easy moves, adds, and changes while Paise Eighty Only

maintaining proper cable bend radius. Includes all necessary M6 cage nuts and screws for mounting.

Supply, installation, and commissioning of a 24-Port 10/100/1000 Mbps Layer 2 Managed Gigabit Switch with

SFP uplink ports, suitable for standard 19” rack mounting. The switch shall support VLAN, QoS, STP/RSTP/MSTP,

Rupees Twenty Three Thousand

258 1.00 SNMP, and have a minimum switching capacity of 56 Gbps. It must include all necessary accessories (mounting kit, 23,048.20 Ea

Forty Eight Paise Twenty Only

power cord, etc.), be UL/CE/FCC Class A certified, and have an internal power supply. Scope includes delivery, rack

installation, configuration, testing, and documentation. Minimum 3-year OEM warranty required.

Rupees One hundred Nine Paise

259 11.00 Supply & Installation Patch Cord [Cat6, 01 Mtr, Rack Side] 109.08 Ea

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded [Approved by Competent Authority i.e. not Rupees Four Thousand Four

Below the rank of Executive Engineer ] hundred Paise Fifty Seven Only

Rupees One Thousand Eight

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

261 1.00 1,851.33 hundred Fifty One Paise Thirty Ea

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by Competent Authority i.e.

262 100.00 50.50 Rupees Fifty Paise Fifty Only Mtr.

not Below the rank of Executive Engineer ]

Supply and installation of factory-terminated Single Mode Optical Fiber Patch Cord, 1 meter in length, with LC–LC

connectors on both ends. The patch cord shall be low-loss, duplex type, with a minimum insertion loss of ≤0.3 dB

and return loss ≥50 dB. It should be compliant with ITU-T G.652D or equivalent standards and suitable for high- Rupees Four hundred Twenty Four

speed fiber optic communication in data centers and telecom environments. Scope includes delivery, installation, Paise Twenty Only

testing for continuity, and proper labeling. Patch cord must be ROHS compliant and factory-tested with test

Supply and installation of 1G SFP (Small Form-Factor Pluggable) Optical Transceiver Module, Single Mode type,

compatible with IEEE 802.3z (1000BASE-LX), for use over Single Mode fiber optic cables. The module shall support

transmission distances up to 10 km (typical) using LC connector type and operate on 1310 nm wavelength. It must Rupees One Thousand Nine

be hot-swappable, fully compatible with standard network switches, and compliant with MSA (Multi-Source hundred Nineteen Only

Agreement) standards. Scope includes delivery, insertion into compatible switch/module, integration with fiber

link, and testing for link integrity. Module shall be OEM certified and carry a minimum 1-year warranty.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, installation, and configuration of a compact firewall device suitable for securing the network. The firewall

shall provide essential security features including stateful packet inspection, basic intrusion prevention, URL

filtering, and VPN support for secure remote access. It must efficiently handle the expected network traffic

Rupees Eighty Five Thousand Two

265 1.00 without impacting performance and support multiple user profiles and security zones. The scope includes 85,244.00 Ea

hundred Forty Four Only

delivery, physical installation, integration with existing network infrastructure, configuration according to library

security policies, testing, and commissioning. Training for basic operation and administration shall be provided.

The device shall come with a minimum one-year warranty and technical support from the OEM.

Supply, delivery, and installation of a brand-new desktop computer system suitable for library operations and

basic administrative tasks. The system shall be equipped with a minimum Intel Core i5 (12th Generation) or AMD

Ryzen 5 processor, 8GB DDR4 RAM (expandable), and a 512GB SSD for fast performance and storage. It shall

Rupees Forty Thousand Four

266 4.00 include a 21.5-inch Full HD LED monitor, a USB wired keyboard and optical mouse, and pre-installed with 40,400.00 Ea

Windows 11 Professional (or latest version) with proper activation. The unit shall support both Ethernet LAN and

Wi-Fi (minimum Wi-Fi 5), and include essential I/O ports such as USB 3.0, HDMI, and audio jacks. The system shall

come with a 3-year on-site warranty and technical support.

Supply and installation of a monochrome laser printer for use in the library for tasks such as printing borrower

slips, overdue notices, reports, and other documents. The printer should have a minimum print speed of 20 pages

Rupees Twenty Two Thousand

267 1.00 per minute (ppm), a duty cycle of at least 10,000 pages per month, and support USB and/or Wi-Fi connectivity. 22,220.00 Ea

Two hundred Twenty Only

The printer should come with starter toner, power cables, driver installation CD (or digital access), and a one-year

warranty. Setup and testing at the library site are to be included.

CCTV : Supply, installation, testing, and commissioning of STQC-certified dome‑type IP CCTV camera with

vandal‑proof metal housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Rupees Thirteen Thousand Six

Requirements; to be fully integrated, configured, and commissioned as a complete, operable surveillance unit in hundred Thirty Five Only

accordance with the contract specifications

Supply, installation, testing, and commissioning of a 5 MP STQC-certified bullet‑type IP CCTV camera with

vandal‑proof metal housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Rupees Fifteen Thousand One

Requirements; to be fully integrated, configured, and commissioned as a complete, operable surveillance unit per hundred Fifty Only

contract specifications.

Rupees One hundred Forty Six

270 23.00 Supply & Installation CCTV Back Box [ IP65 ] 146.45 Ea

Paise Forty Five Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

Rupees Thirty Two Paise Thirty

271 500.00 or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with 32.32 Mtr.

following dia of pipes, in approved manner as directed (b) 25 mm

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

SITC of CAT6 UTP 23AWG Solid: Per Meter Rupees Forty Three Paise Forty

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer Three Only

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded Rupees Four Thousand Four

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] hundred Paise Fifty Seven Only

Supply, Installation, Testing, and Commissioning (SITC) oF 1U horizontal cable manager for a 19-inch rack, made of

powder-coated steel with a black finish. The manager shall feature multiple D-rings, typically 5 to 7, to provide Rupees Two hundred Eighty Two

organized routing and support for patch cables. The design should facilitate easy moves, adds, and changes while Paise Eighty Only

maintaining proper cable bend radius. Includes all necessary M6 cage nuts and screws for mounting.

SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m Rupees Seven hundred Seventy

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Nine Paise Seventy Two Only

Rupees One hundred Nine Paise

276 23.00 Supply & Installation Patch Cord [Cat6, 01 Mtr, Rack Side] 109.08 Ea

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports

Advanced L2 switching and security features

Rupees Eighteen Thousand Four

277 3.00 L2+ Static Routing 18,400.18 Ea

hundred Paise Eighteen Only

Optional “standard mode” or “surveillance mode” management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Rupees One Thousand Eight

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

278 5.00 1,851.33 hundred Fifty One Paise Thirty Ea

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Rupees Sixty Four Thousand Five

279 1.00 Supply & Installation CCTV NVR [24Ch, 8 SATA] Up to 12MP Resolution for Preview and Playback 64,532.94 hundred Thirty Two Paise Ninety Ea

Rupees Twenty Thousand Two

280 1.00 Supply & Installation 24U Wall Mount Rack 20,200.00 Ea

Supply and installation of 6TB Surveillance-grade Hard Disk Drive (HDD) suitable for continuous 24x7 operation in

CCTV/DVR/NVR systems. The HDD shall be specifically designed for video surveillance applications with enhanced

reliability, high write endurance, and optimized for multiple HD video stream recording. It must support SATA III

interface (6 Gbps), have a minimum spindle speed of 5400 RPM or higher, and include vibration resistance and Rupees Fifteen Thousand Eight

thermal management features. Scope includes delivery, integration with existing recording system (DVR/NVR), hundred Six Paise Fifty Only

formatting, testing, and ensuring proper recording functionality. HDD must be from a reputed brand

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

FIRE DETECTION SYSTEM : Supply & Installation Fire Alarm Panel Addressable Type with Two Loop & With battary Rupees Ninety Three Thousand

282 1.00 Backup 93,778.50 Seven hundred Seventy Eight Paise Ea

Supply & Installation Multisensor Detector Rupees Two Thousand One

283 25.00 2,171.50 hundred Seventy One Paise Fifty Ea

Supply & Installation Risponse Indicator Rupees Eight hundred Fifty Eight

Paise Fifty Only

Supply & Installation Manual Call point

Rupees Two Thousand Six

hundred Sixty Six Paise Forty Only

Supply & Installation Hooter Rupees One Thousand Sixty Paise

Rupees Three Thousand Forty

287 2.00 Supply & Installation Signal Module 3,040.10 Ea

Rupees Two Thousand Four

288 2.00 Supply & Installation Isolator Module 2,424.00 Ea

hundred Twenty Four Only

Rupees Ninety Nine Paise Ninety

289 120.00 Supply & Laying 2 core 1.5 Sqmm FRLS armored Control Cable 99.99 Mtr.

PA SYSTEM : Supplying and erecting ceiling speaker with rated power of 30 watt/power tapping 30/15/7.5 watt Rupees Two Thousand Five

290 14.00 available,opening angle 180 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 2,569.44 hundred Sixty Nine Paise Forty Ea

20KHz [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Four Only

SITC of 16 Zone Standaone Voice Alarm controller 19” 2U rack mount type with Built in Media Player with USB Rupees One Lakh Forty Three

291 1.00 (MP3/ WAV/FLAC), Bluetooth V5.0, FM Radio functions, SD CARD , Pre-recorded Evacuation messages and fire 143,369.50 thousand Three hundred Sixty Nine Ea

alarm integration supported Paise Fifty Only

Rupees Forty Two Thousand Five

292 1.00 Supply & Installation Voice Alarm Call Station 42,561.40 hundred Sixty One Paise Forty Ea

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees Thirty Three Paise Thirty

following dia of pipes, in approved manner as directed Three Only

Rupees Thirty Five Paise Thirty

294 120.00 Supply & Laying 2 core 1.5 Sqmm Speaker Cable (shielded cable - signal) 35.35 Mtr.

EPBX SYSTEM : SITC of ABS back box Rupees Two hundred Ninety Four

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Paise Ninety Two Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

SITC of Face Plate - Single (Keystone Jack,square)

296 8.00 90.90 Rupees Ninety Paise Ninety Only Ea

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Digital/ PCM/ TDM EPABX System having SMT design, system with flexible universal slots.

Inbuilt Auto attendant facility, Minimum 150 Nos. conference, Analog extension line, Calling GSM,

E&M line, PRI/ EI & VOIP program me through Analog telephone digital key from Ethernet, public address

cord, shall have unrestricted simultaneous dialing facility, QSIG protocol on PRI, 95/ STD/ ISD/ Local-Locking,

Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device,

Chairman/ Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day

Night Mode, Auto Call Back, Barge-in, Call Pick Up,& Call Transfer, Call transfer while Ringing with Voice Rupees Forty Five Thousand Three

297 1.00 Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music 45,398.49 hundred Ninety Eight Paise Forty Ea

Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Nine Only

Fax Homing, Global Directory Printing with following capacities

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

[A] No of Extension 16, No of Junctions 6, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of

expandable ports : 48, Operators Console - 01 Compatible : ISDN

Supply and installation of 8-pair Krone-type tag block housed inside a fabricated CRCA powder-coated junction

box of suitable size, complete with dual padlocking provision, earthing terminal, and integrated IPM modules for

Rupees Eight Thousand Five

298 1.00 over-voltage and over-current protection on all lines. The box shall be wall-mountable and sized to accommodate 8,585.00 Ea

hundred Eighty Five Only

15 modules (150 pairs), with proper cable management space, cable entry glands, and provision for future

expansion if required.

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone

Rupees Eight hundred Ninety Eight

299 8.00 with one touch memory (min.6 nos.)& 99 memories with display system Single line [[Approved by Competent 898.90 Ea

Paise Ninety Only

Authority i.e. not Below the rank of Executive Engineer ]

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees Thirty Three Paise Thirty

following dia of pipes, in approved manner as directed Three Only

SITC of CAT6 UTP 23AWG Solid: Per Meter Rupees Forty Three Paise Forty

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer Three Only

TOTAL (ELV Work) Rupees Only (E)

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting approved make ductable split Air Conditioning unit each consist of remote located

condensing unit and an evaporating unit complete with interconnecting insulated refrigerant piping up to

RMT. rigid PVC, drain piping of 10 kg / cm2 dully insulated with nitrile rubber insulation of 10 RMT with ECO

Rupees One Lakh Forty Nine

Friendly Green gas. The condensing unit is complete with hermetically sealed scroll compressor & condenser

302 2.00 149,953.69 thousand Nine hundred Fifty Three Ea.

unit which effectively achieves heat rejection by utilizing air of fan and coil type condenser. The evaporating unit

Paise Sixty Nine Only

will be complete with DX evaporator centrifugal blower, blower motor along with microprocessor biased

remote controller with memory backup etc. (Only ODU For TFA) (A) For 5.5 Ton

Providing and erecting approved make ductable split Air Conditioning unit each consist of remote located

condensing unit and an evaporating unit complete with interconnecting insulated refrigerant piping up to

RMT. rigid PVC, drain piping of 10 kg / cm2 dully insulated with nitrile rubber insulation of 10 RMT with ECO

Friendly Green gas. The condensing unit is complete with hermetically sealed scroll compressor & condenser Rupees Two Lakh Fifty Five

303 1.00 unit which effectively achieves heat rejection by utilizing air of fan and coil type condenser. The evaporating unit 255,062.37 thousand Sixty Two Paise Thirty Ea.

will be complete with DX evaporator centrifugal blower, blower motor along with microprocessor biased Seven Only

remote controller with memory backup etc. (Only ODU For TFA) (C) For 11 Ton

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for DX Unit, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular

Rupees Five hundred Eleven Paise

304 10.00 insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as 511.06 Mtr.

given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as

required : (C) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for DX Unit, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular

Rupees Six hundred Sixty Four

305 5.00 insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as 664.58 Mtr.

Paise Fifty Eight Only

given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as

required : (D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for DX Unit, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular

Rupees Nine hundred Sixty Two

306 10.00 insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as 962.53 Mtr.

Paise Fifty Three Only

given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as

required : (F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for DX Unit, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular Rupees One Thousand Two

307 5.00 insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as 1,202.91 hundred Two Paise Ninety One Mtr.

given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as Only

required : (H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation. (C.) 32mm dia. Rupees Eighty Seven Paise Eighty

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation. (D) 25 mm dia. Rupees Eighty Seven Paise Eighty

Supply, installation, testing and commissioning of Inline Centrifugal Cabinet type fan; The fan shall preferably be

single skin with swing out motors, with high gloss surface finished manufactured from ZERO spangle galvanized

steel; these fans shall be double width forward curve wheel, all whells are statically and dynamically balanced to

Rupees Twenty Five Thousand

310 2.00 G2.5 in accordance with ISO 21940. Direction of discharge and rotation position shall be as per the job 25,250.00 Ea.

Two hundred Fifty Only

requirement and shall be marked on the fan assembly.Modularized Cabinet Design: removable access panel on

both sides for easy access to fan and motor. (A) 1200 CFM with 30mm static Pressure

Supply, installation, testing and commissioning of Inline Centrifugal Cabinet type fan; The fan shall preferably be

single skin with swing out motors, with high gloss surface finished manufactured from ZERO spangle galvanized

steel; these fans shall be double width forward curve wheel, all whells are statically and dynamically balanced to

Rupees Thirty Five Thousand

311 1.00 G2.5 in accordance with ISO 21940. Direction of discharge and rotation position shall be as per the job 35,350.00 Ea.

requirement and shall be marked on the fan assembly.Modularized Cabinet Design: removable access panel on Three hundred Fifty Only

both sides for easy access to fan and motor. (B) 2500 CFM with 30mm static Pressure

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Design, Supply, Lifting & Shifting at actual proposed location of site, Installation, Testing, Commissioning and Field

Performance Validation of Ceiling Treated Fresh Air Unit as specified below; Double Skinned with inner & powder

coated outer skin of 0.8 mm, Density 40 Kg / m³ & 40 mm thick PUF Sandwitched insulated sectionalized

construction Comprising of Fan section with best efficiency Plug Fan driven by suitable pole Eff - 1 Motor with

VFD, IP55 / 4P TEFC Fan Motor / fire resistant flexible fan outlet connection, The AHU shall comprise filter section

with 8 micron pre filter, Cooling coil section complete with Copper tube 13 FPI AL finned 6R deep DX cooling Coils,

SS 304 condensate drain pan duly insulated with 15 mm thick cross linked polymer Nitrile rubber insulation, Rupees Four Lakh Four thousand

necessary vibration isolation arrangement by providing spring isolators;Prices to include dispatch of AHU in Semi- Only

knocked down condition, assembly at site and lifting / shifting to actual locations as per layouts; Performance to

be complied - common for below AHUs: Fan Exit velocity<=1200 FPM; Coil Face Velocity=500 FPM max; Filter

Face=400 FPM max; dB<=60 at 1 M distance. (A) 1000 CFM & 5 TR capacity

Design, Supply, Lifting & Shifting at actual proposed location of site, Installation, Testing, Commissioning and Field

Performance Validation of Ceiling Treated Fresh Air Unit as specified below; Double Skinned with inner & powder

coated outer skin of 0.8 mm, Density 40 Kg / m³ & 40 mm thick PUF Sandwitched insulated sectionalized

construction Comprising of Fan section with best efficiency Plug Fan driven by suitable pole Eff - 1 Motor with

VFD, IP55 / 4P TEFC Fan Motor / fire resistant flexible fan outlet connection, The AHU shall comprise filter section

with 8 micron pre filter, Cooling coil section complete with Copper tube 13 FPI AL finned 6R deep DX cooling Coils,

Rupees Five Lakh Fifty Five

313 1.00 SS 304 condensate drain pan duly insulated with 15 mm thick cross linked polymer Nitrile rubber insulation, 555,500.00 Ea.

necessary vibration isolation arrangement by providing spring isolators;Prices to include dispatch of AHU in Semi- thousand Five hundred Only

knocked down condition, assembly at site and lifting / shifting to actual locations as per layouts; Performance to

be complied - common for below AHUs: Fan Exit velocity<=1200 FPM; Coil Face Velocity=500 FPM max; Filter

Face=400 FPM max; dB<=60 at 1 M distance. (B) 2200 CFM & 11 TR capacity

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round

Rupees One Thousand Three

ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

314 110.00 1,308.96 hundred Eight Paise Ninety Six Sqmt

approved drawings and specifications of following sheet thickness complete as required. (A) Thickness 0.63 mm

sheet (22 Gauge)

Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control Rupees Nine Thousand Eight

315 3.00 damper with enthalpy sensor and necessary control wire (minimum 1.5 sq-mm) for integration within AHU room 9,836.39 hundred Thirty Six Paise Thirty Sqmt

(A) Damper Nine Only

Supplying, fixing testing commissioning of supply air diffuser of powder coated aluminium with aluminium Rupees Thirteen Thousand Six

316 1.50 volume control dampers with anti smudge ring & removable core and size & shape as per site requirement and 13,688.53 hundred Eighty Eight Paise Fifty Sqmt

approved design. Three Only

SCHEDULE-B AUTOPSY,PIU AT RAJKOT

NAME OF WORK : CONSTRUCTION OF AUTPOSY BLOCK AT PDU MEDICAL COLLEGE

FOR CIVIL HOSPITAL CAMPUS AT RAJKOT

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying, fixing testing commissioning of Return air diffuser of powder coated aluminium without volume Rupees Nine Thousand Three

317 1.50 control dampers with anti smudge ring & removable core and size & shape as per site requirement and approved 9,394.01 hundred Ninety Four Paise One Sqmt

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints Rupees Eight hundred Seventy

shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per Seven Paise Sixty Nine Only

specifications and as required. (A) 19mm

TOTAL (HVAC Work) (F)

TOTAL (A + B + C + D + E + F)

Please strike out whichever is not Applicable

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

5 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

6 All the columns in schedule should be filled in Ink and the total of the entries in the last columns should be struck by the contractor under his signature.

7 Rates quoted include clearance of site ( Prior commencement of work and its close) in all respects and hold good for work under all condition,site,moisture/ weather etc.

The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed specification and details of work and amount Involved at site without

any payment as directed by Engineer-In-Charge.

I/We hereby declare that, I/We have visited the site and fully acquainted my self / ourselves with the local situation regarding materials & other factors pertaining to the works before submitting this

10 I/We hereby declare that, I/We have carefully studied conditions of contract, Specifications & other than tender documents of this work and agree to execute that same accordingly.

SCHEDULE-B AUTOPSY,PIU AT RAJKOT