Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.2 LAccepted-AOC | ₹9.2 L | 1 | Accepted-AOC Lowest Bidder |
| 2 | 2₹10.1 L+₹97,653.96 (10.7%)Rejected-Finance | ₹10.1 L+₹97,653.96 (10.7%) | 2 | Rejected-Finance L2 Bidder |
Tender Value
₹11.5 L
EMD Value
₹22,905
Closing Date
29 Jan 2025, 4:00 pmClosed
EE III
EE WDIII, WRD, Ponda Goa
Repairs to the Kapileshwari nallah retaining wall downstream of velop culvert at Kapileshwari in Ponda Taluka
2025_WRD_19387_1
10/24-25/ACT/WDIII/WRd/620/s3
Open Tender
Miscellaneous Works
Item Rate
30 days
Ponda
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
₹22,905
2 Apr 2025
14 Jan 2025
30 Jan 2025
14 Jan 2025
29 Jan 2025
14 Jan 2025
Amount
Earth work in excavation by mechanical/manual means in all type of strata comprising any of the materials such as soil, silt, sand, clay gravels, moorum, of all varities shingles, pebbles, all type of conglomerates, laterite rock, soft rock, disintegrated rock, fissured shattered, decomposed rock or weathered rock and all such other materials either in full or in parts as the case may be adopting any approved method or methods as may be convinient or permitted inclusive of chiseling, wedging etc but blasting prohibited in all conditions such as dry, moist, saturated, submerged, foul conditions etc. including pumping or bailing out of water, including setting out construction of shoring and bracing removal stumps and other deleterious matter, dressing of sides and bottom, and backfilling the excavated earth to the extent required and disposing of the remaining excavated soil/rock as directed by the Engineer-In-Charge for all leads and all lifts as specified and directed etc. complete.
Demolishing cement concrete 1:3:6 or richer mix including disposal of the material within 50 m lead.
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Supplying jamba wooden bally piles 150 mm mean diameter cut to length required (not exceeding 9 meters) and planted in position ready for driving: b) Above 2.50 meters upto 3.50 meters long pile
Heading and pointing whole bally piles 150mm diameter including only rings, providing and fixing pile shoes, cutting of heads after driving and taking out rings removing cut off portions to departmental store as specified.
Treatment of timber piles in a hot mixture of tar and creosote oil in the proportion of 20 litres of coal tar to 25 litres of creosote oil for a period of 4 minutes dipping including the cost of all materials fuel and labour complete
Driving down wooden piles of 150mm diameter either in vertical or battered work to approved lines and level through various strata including arranging all the appliances necessary for pile driving complete at site (portion in ground only to be measured) b) Above 2.50 meters upto 3.50 meters long pile
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level
b) In retaining walls , return walls, walls (any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level
Centering and shuttering including struttings, propping etc. and removal of formwork for : a) Foundations, footings, bases for columns and mass concrete.
b) vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc.
Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while laying pipes of approved the concrete of retaining wall, wing wall and earth retaining structure complete as direted by the Engineer in charge. A) 110 mm dia
Providing construction joints with 20mm thick thermacol sheets including cutting and placing in position etc, Complete as per direction of Engineer in charge.
MUSHTAQ AHMED M. BULBULE (BID ID -43109)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .