Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹31.5 L+₹11,652.50 (0.37%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹32.4 L+₹1.0 L (3.19%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹32.6 L+₹1.2 L (3.74%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹33.0 L+₹1.6 L (5.20%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | KISHAN CONTRACTOR L1 | BHARDWAJ BUILDERS L4 | M/S SEALINE BUILDERS L7 | Sushil Chauhan L6 | Krithvik Electricals L3 | surinder kumar jindal & bros. L2 | M/S AMOLAK SINGH AND SONS L8 | M S ASSOCIATES L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete. | 12 | Each | 50 ₹600 | 60 ₹720 | 62 ₹744 | 40 ₹480 | 10 ₹120 Lowest | 55 ₹660 | 100 ₹1,200 | 30 ₹360 |
| 2.00 | S&F for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified | 60 | RM | 600 ₹36,000 Lowest | 610 ₹36,600 | 650 ₹39,000 | 600 ₹36,000 Lowest | 650 ₹39,000 | 600 ₹36,000 Lowest | 600 ₹36,000 Lowest | 665 ₹39,900 |
| 3.00 | M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, complete all as specied and as directed | 0.35 | Cum | 4,250 ₹1,487.5 | 4,300 ₹1,505 | 5,400 ₹1,890 | 4,500 ₹1,575 | 4,500 ₹1,575 | 4,200 ₹1,470 Lowest | 7,000 ₹2,450 | 4,555 ₹1,594.25 |
| 4.00 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed. | 25 | Sqm | 2,800 ₹70,000 | 2,850 ₹71,250 | 3,200 ₹80,000 | 2,500 ₹62,500 Lowest | 2,500 ₹62,500 Lowest | 2,800 ₹70,000 | 3,000 ₹75,000 | 2,555 ₹63,875 |
| 5.00 | Dismantling of Factory made PVC cubical partition complete all as directed. | 8 | Each Job | 150 ₹1,200 Lowest | 155 ₹1,240 | 160 ₹1,280 | 150 ₹1,200 Lowest | 150 ₹1,200 Lowest | 200 ₹1,600 | 1,000 ₹8,000 | 155 ₹1,240 |
| 6.00 | Factory casted 12 mm High Pressure Laminated (HPL) sheet certified to IS-2046 for toilet and shower room partition with approved design and shade by Engr-in-charge; comprising of good quality and high pressure resistance with proper resistance from scratch, abrasion, heat, chemical, impact and moisture resistance along with anti-bacterial resitsance complete all as specified and directed. | 170 | Sqm | 3,500 ₹5,95,000 Lowest | 3,600 ₹6,12,000 | 3,850 ₹6,54,500 | 3,800 ₹6,46,000 | 3,800 ₹6,46,000 | 3,600 ₹6,12,000 | 5,000 ₹8,50,000 | 3,755 ₹6,38,350 |
| 7.00 | Factory made stainless steel hardware set comprising of :- Spring Loaded auto Closed Hinges 3 No., (SS 304) - Coat Hook Cum Door Stopper 1 No., ( SS 304)- Lock cum privacy indicator 1 No., (SS 304)- Round Door Knob 1Pair, (SS 304)- Adjustable Leg height 120mm to 150mm 1 No., (SS 316)- Screw- Rubber and all accesories reqd to make cubicle partition. Note:The hardware quality,size and grade shall be approved by Engineer-in-Charge and of stainless steel grade of certified warranty. Make "SUPERFIT/GODREJ/HITACHI". | 35 | Each job | 2,800 ₹98,000 | 2,900 ₹1,01,500 | 3,250 ₹1,13,750 | 2,850 ₹99,750 | 2,800 ₹98,000 | 2,750 ₹96,250 | 2,500 ₹87,500 Lowest | 2,855 ₹99,925 |
| 8.00 | S&F SS Finish chromium plated top rail of suitable length having section 50 x 32mm or other size to receive 12 mm thick HPL sheet well fitted and make proper finish with the help of screws, adhesives supported by walls or clamps complete all as specified and directed. | 65 | RM | 650 ₹42,250 | 450 ₹29,250 Lowest | 450 ₹29,250 Lowest | 750 ₹48,750 | 700 ₹45,500 | 600 ₹39,000 | 500 ₹32,500 | 755 ₹49,075 |
| 9.00 | S&F SS Finish chromium plated U shaped rail of suitable length having section 25mm x 16mm or other size to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. | 120 | RM | 350 ₹42,000 Lowest | 360 ₹43,200 | 365 ₹43,800 | 350 ₹42,000 Lowest | 350 ₹42,000 Lowest | 400 ₹48,000 | 500 ₹60,000 | 355 ₹42,600 |
| 10.00 | S&F SS Finish Anodize Chromium plated door stopper /H type channel section of suitable length having section 20mm x 12.5 mm or other to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. | 120 | RM | 350 ₹42,000 Lowest | 360 ₹43,200 | 360 ₹43,200 | 450 ₹54,000 | 400 ₹48,000 | 400 ₹48,000 | 500 ₹60,000 | 455 ₹54,600 |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
31 Oct 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (KH) Yol
GE (KH) Yol
SPECIAL REPAIR TO 04 X BATHROOM IN BLDG NO P-81 (OTM ACCN) UNDER AGE B/R-I AT MIL STN YOL
2026_MES_782233_2
GE/Y-81/2026-27
Open Tender
Civil Works
Item Rate
270 days
YOL CANTT
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (KH) Yol
₹56,000
Yes
3 Nov 2026
16 Oct 2026
2 Nov 2026
16 Oct 2026
31 Oct 2026
24 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete. | 12 | Each | - | - |
| 2 | S&F for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified | 60 | RM | - | - |
| 3 | M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, complete all as specied and as directed | 0.35 | Cum | - | - |
| 4 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed. | 25 | Sqm | - | - |
| 5 | Dismantling of Factory made PVC cubical partition complete all as directed. | 8 | Each Job | - | - |
| 6 | Factory casted 12 mm High Pressure Laminated (HPL) sheet certified to IS-2046 for toilet and shower room partition with approved design and shade by Engr-in-charge; comprising of good quality and high pressure resistance with proper resistance from scratch, abrasion, heat, chemical, impact and moisture resistance along with anti-bacterial resitsance complete all as specified and directed. | 170 | Sqm | - | - |
| 7 | Factory made stainless steel hardware set comprising of :- Spring Loaded auto Closed Hinges 3 No., (SS 304) - Coat Hook Cum Door Stopper 1 No., ( SS 304)- Lock cum privacy indicator 1 No., (SS 304)- Round Door Knob 1Pair, (SS 304)- Adjustable Leg height 120mm to 150mm 1 No., (SS 316)- Screw- Rubber and all accesories reqd to make cubicle partition. Note:The hardware quality,size and grade shall be approved by Engineer-in-Charge and of stainless steel grade of certified warranty. Make "SUPERFIT/GODREJ/HITACHI". | 35 | Each job | - | - |
| 8 | S&F SS Finish chromium plated top rail of suitable length having section 50 x 32mm or other size to receive 12 mm thick HPL sheet well fitted and make proper finish with the help of screws, adhesives supported by walls or clamps complete all as specified and directed. | 65 | RM | - | - |
| 9 | S&F SS Finish chromium plated U shaped rail of suitable length having section 25mm x 16mm or other size to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. | 120 | RM | - | - |
| 10 | S&F SS Finish Anodize Chromium plated door stopper /H type channel section of suitable length having section 20mm x 12.5 mm or other to receive 12 mm thk HPL sheet well fitted and make proper finish with the help of screws,adhesives supported by walls or clamps complete all as specified and directed. | 120 | RM | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tender81.pdf
Tender Documents • 0.54 MB
BOQ_890842.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .