REPAIR/MAINT OF FENCING, FOOTPATH, STORM DRAIN, COMPOUND WALL, HARDSTANDING AND CONNECTED WORKS IN THE AREA UNDER AGE B/R-II AT CLEMENT TOWN, DEHRADUN

Amount

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar complete all as specified and directed.

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete incl demolition of cement concrete complete all as specified and directed

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) in surface channels and drains and finished the surface even and fair incl demolition of cement concrete complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces on wall, finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces complete all as specified and directed. Make : Snowcem/Berger/Durocem

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed

M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 incl demolition of reinforeced cement concrete of any description and in any position complete all as specified and directed Note : Reinforcement shall be measured and paid for separately.

S&F mild steel framed work as in manhole cover frames conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Dismantaling fencing wire mesh of any type and in any position complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only Chain link fencing inlcuding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with MS post of grade Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed.

Dismantling steel poles/struts, any size including removing from site complete all as specified and directed.

Excavation in post hole (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (Using 20mm graded stone agrregate ) as in foundation of posts, railing and similar work complete all as specified and directed.

M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolt (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15 mm and length of bolt exc 5 cm but n. exc 10 cm complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer including preparation of new or previously untreated steel/iron surfaces of any description over 10 cm in width or girth, not otherwise described complete all as specified and directed.

Dismantling barbed wire fencing fixed in slots of angle iron posts of any description and complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

Fixing only Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing (except materials) and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

M&L for rubber moulded vibro compacted coloured glossy finish precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-40 grade laid over and incl 25mm thick sand cushioning over 75mm thick PCC 1:4:8 type D2 incl demolition of PCC of any description complete all as specified and directed

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 300mm x 300mm x 20mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 and 75mm thick PCC 1:4:8 type D2 incl demolition of PCC of any description complete all as specified and directed Make : Ferrocon/Nitco/Hindustan tiles

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement incl demolition of cement concrete 75mm thick of any description complete all as specified and directed

M&L for PCC 1:2:4 type B2 (Using 40mm graded stone aggregate), 100mm thick as in floor/paving etc finishing even and smooth without using extra cement incl demolition of cement concrete 100mm thick of any description as in floor/paving complete all as specified and directed

Dismantaling structural steel work including door, gates but excluding framed truss etc complete all as specified and directed.

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/s Inderlal

M/S Manmohan Singh Anand

Alankar Traders

High Tech Metal India

P K ASSOCIATES

M/S Pooja Construction

RADHA ENTERPRISES