AUGMENTATION OF WATER SUPPLY INSTALLATION UNDER AGE I LANSDOWNE

Amount

Supply, install, testing and commissioning of water treatment plant with complete accessories as per the approved OEM standards, comprising of M.S. fabricated vertical- Multi grade pressure filter of suitable size to treat 76000 ltr/hr of raw water with 10 mm thickness at body and 12 mm thickness at dish and bed plate with 150 mm Dia. MS ERW pipe Frontal piping with Butterfly valves flangeless finish 150 mm- 05 Nos, complete with Backwashing provision, Painting Internal external with two coats of bituminous paint over One coat of red oxide primer. The filtration plant will be will be consist of complete set of valves, pressure gauge with gauge cock and frontal pipe work done with MS medium class pipes and air vent system, manhole opening for vacating and filling media with following specification:

Multi Grade Filter of capacity 76000 Liters per hour with and including following specifications:- (a) Model :FERROTREAR VSM 101630 FP or Eqvt. Model of approved OEMs (b) DIA : 3000 mm (c) SOH : 1500 mm (d) Thickness of body Dish End and Bed Plate: 10 mm x 12 mm x 12 mm (e) Size Of Frontal Pipe : 150 MM (f) Valves in frontal pipe: Butterfly valve flangeless finish 150 mm - 05 Nos (g) Flow rate (m3/hr) : 76 (h) Filtering Media (Gravel and sand) Quantity: 266 cft (j) Under bed plate system with strainer: Double nut type PVC strainer- 700 Nos (k) Pressure gauge with fittings: 02 Sets for raw and filter water (n) Suitable capacity pump set with 5 hp 440 v AC motor 1450 rpm TEFC type for proper backwash the pressure filter

Note:- (i) Approved Make: RMCO/ Ion Exchange (I) Ltd. or equivalent (ii) The rate quoted above includes all fasteners, frontal (face) ERW pipe line 150 mm(medium grade). (iii) Test report for water shall be submitted from Govt approved lab . The cost for lab tests of water are deemed to be included in qouted rates . (iv) The rate quoted above includes necessary civil foundation work as per manufacturer specification.

Supply, laying, fixing/jointing and testing of 150mm bore and 4.80 mm wall thickness mild steel medium grade ERW pipe confirming to IS 1239(Part I):2004 in standard length welded in any shape and making bend etc with and including 10mm thick flanges at both ends and two coat of rubber black paint in outer side complete all as specified and directed.

Supply, laying, fixing/jointing and testing of 100 mm bore and 4.50 mm wall thickness mild steel medium grade ERW pipe confirming to IS 1239(Part I):2004 in standard length welded in any shape and making bend etc with and including 10mm thick flanges at both ends and two coat of rubber black paint in outer side complete all as specified and directed.

S & F Direct On Line Starter 415 Volt for motor rating of 5 HP with contactor rating of 20 Amp in sheet metal enclosure complete all as specified and directed.

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed, steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 10 sqmm 4 core complete all as specifed and directed. Note:- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 40 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid separately under relevant items. .

Taking down carefully old servicable Gate valves of size 50 mm and depositing the same to MES store yard which will be taken on charge for reuse at other location complete all as specified and directed by Engineer-in-Charge .

Taking down carefully old servicable sluice valves of size 80 mm and depositing the same to MES store yard which will be taken on charge for reuse at other location complete all as specified and directed by Engineer-in-Charge

Taking down carefully old servicable sluice valves of size 100 mm and depositing the same to MES store yard which will be taken on charge for reuse at other location complete all as specified and directed by Engineer-in-Charge .

Taking down carefully old servicable sluice valves of size 150 mm and depositing the same to MES store yard which will be taken on charge for reuse at other location complete all as specified and directed by Engineer-in-Charge

Supply, Installation,Testing and Commissioning of Ultrasonic Level Transmitter at Sump for measurement of level with following specification complete with necessary wiring and interconnection as per Engineer in Charge :- Range : 0-8 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC Make: Banner Cat No. QT50ULB or equivalent in Nivelco and Siemens

Supply, Installation Testing & Commissioning of Outdoor type having Canopy and Double Door for weather protection, PLC ( Programmable Logic Controller) based Pump and Valve Automation, Protection Panel with wireless Radio Frequency based communication suitable for control and monitoring of 02 Nos. Ultrasonic Sensor, 13 Nos. motorized butterfly valves. The panel should be of minimum size 1200(H) X 1000(W) X 250(D) mm fabricated from 3.15 mm CRCA Sheet. (Location :- 2nd Lift 2LG Tank-02 Nos, Distribution Line) The Panel should comprise the following items:- (a) Water Level Display having following components: - (i) 01 no. HMI - 7" Graphical Touch screen display (Make: SCHNEIDER / SIEMENS/ ABB/ PHOENIX CONTACT) (ii). Should have 01 No. RS 485 and 01 No. USB programming port. (iii). Should have USB downloading port. (iv). Support external data storage on a USB memory stick for storing production data and backing up applications (b) All necessary electronic components required for Automatic Operation of Motor Actuated Butterfly Valves having following components: - (i) 01 No. PLC with follwing specifications:- (MAKE:- SCHNEIDER/SIEMENS/ABB/PHOENIX CONTACT) (ii). Non isolated RS 485 communication port or Ethernet communication port. (iii). Suitable No. of digital / analog input and outputs. (iv). Programming software based on IEC to facilitate building of custom build function blocks. (v). It shall support integrated web server. (vi). Protocol : Modbus TCPIP, Expandable upto 248 I/O’s and 7 expansion module (c) Multifunction Energy meter (including PF, Current, Voltage etc.) (d) Single Phasing Prevention (MAKE:- GIC/SIEMENS/L&T/Minilec) (e) All necessary electronic components required for Manual Mode Operation (all connected sub systems including all valves in pump houses and connected buildings / overhead tanks) from the PLC based Control Panel.

Supply, Installation Testing & Commissioning of Outdoor type having Canopy and Double Door for weather protection, PLC ( Programmable Logic Controller) based Pump and Valve Automation, Protection Panel with wireless Radio Frequency based communication suitable for control and monitoring of 01 Nos. Ultrasonic Sensor, 05 Nos. motorized butterfly valves. The panel should be of minimum size 1000(H) X 800(W) X 250(D) mm fabricated from 3.15 mm CRCA Sheet.(Location :- 2nd Lift 3LG Tank Distribution Line) The Panel should comprise the following items:- (a) Water Level Display having following components: - (i) 01 no. HMI - 7" Graphical Touch screen display (Make: SCHNEIDER / SIEMENS/ ABB/ PHOENIX CONTACT) (ii). Should have 01 No. RS 485 and 01 No. USB programming port. (iii). Should have USB downloading port. (iv). Support external data storage on a USB memory stick for storing production data and backing up applications (b) All necessary electronic components required for Automatic Operation of Motor Actuated Butterfly Valves having following components: - (i) 01 No. PLC with follwing specifications:- (MAKE:- SCHNEIDER/SIEMENS/ABB/PHOENIX CONTACT) (ii). Non isolated RS 485 communication port or Ethernet communication port. (iii). Suitable No. of digital / analog input and outputs. (iv). Programming software based on IEC to facilitate building of custom build function blocks. (v). It shall support integrated web server. (vi). Protocol : Modbus TCPIP, Expandable upto 248 I/O’s and 7 expansion module (c) Multifunction Energy meter (including PF, Current, Voltage etc.) (d) Single Phasing Prevention (MAKE:- GIC/SIEMENS/L&T/Minilec) (e) All necessary electronic components required for Manual Mode Operation (all connected sub systems including all valves in pump houses and connected buildings / overhead tanks) from the PLC based Control Panel.

Supply, Installation, Testing and Commissioning, Programming of Master Control Station SCADA Software. The scope includes:- Services for programming, configuration and customisation of the Smart Station Platform with respect to the Water supply Module as per actual site conditions and requirement of the engineer. (a). Landing Page to depict criritcal paramters viz. - Level of water in all tanks, pump status ON/OFF/FAIL and Water Quality parameters (b). Creation of drop down tabs to monitor the all Pump houses and Remote PLC Panel systems individually (c). Creation of individual PLC Panel wise schematics and layouts for the Water Supply system as per the actual site including display of all relevant parameters viz. Water level, Pump ON/OFF/FAIL status, Valve OPEN/CLOSE/FAIL status (d). Soft keys for remote manual operation of all pumps and motorised valves from the Master Control station. (e). Creation of Day wise Reports for :- (i) Run hours of pumps (ii) Pump / valve operation failures (iii) Active/Return status of each equipment with date and time. (iv). Configuring notifications, alerts and alarms as per preset logic. (v) Consumption Patterns - Daily, Weekly, Monthly and Annually. Note :- The work has to be carried through :- Universal Switch Gear Control/GE Automation & Control/ABB Automation/Siemens. Make of SCADA: - Schneider Electric, Siemens, ABB Automation, Rockwell Automation, Phoenix Contact (f). Personal Computer as central Server for development version of the scada software and reporting the software with following specifiaction:- Intel 8th Gen Core I5, 4 GB RAM, 500 GB HDD, Keyboard / Mouse, 21 inches LED monitor. (g). 600VA UPS including batteries for 1/2 Hr backup - Make:- APC, NUMERIC, TATA LIEBERT

Supply, Installation, Testing, Commissioning 2 KVA UPS / INVERTER with Sealed Lead Acid Maintenanace free Batteries for powering the panel for a minimum of 30 minutes in case of supply failure. UPS should have following features:- Charger:- Build in solit stage recharge. Display:- LED Display Audible Alarm:- Main Failure Alarm, Battery Low Alarm, UPS Warning, Fault. (Make: APC / TATA LIEBERT / NUMERIC / CYBERPOWER/ MICROTEK)

Supply, Installation, Testing, Commissioning and Programming of Omni or Bi Directional Parabolic antenna with control station to generate strong directional effect with WLAN network support having mast mounting arrangment. Control station should operate on license free frequency with necessary hardware at a suitable location to be connected to the central scada server so as to establish connectivity with every station of the network after conducting a frequency survey of the entire area of interest and identify suitable locations to mount the station hardware and the height of the antennas to establish clear line of sight either directly or by multi hop so as to be able to send data. Antenna type:- Omni or Bi Directional Parabolic antenna Gain:- as per site requirement Degree of protection:- IP65, seawater-resistant, Material:- Lexan EXL 9330 (Antenna housing), V2A (Bracket), V2A (Mast clip), Mounting type:- Mast mounting The should have a approval of Wi-Fi compliance, Environmentally Friendly Use Period :- UNLIMITED = EFUP-e Note:-Rate quoted is deemed to be included for making arrangemets of accessories such as mounting bracket and mast clips Make:- Siemens / Schneider Electric / Universal Switch Gear Control / Cambium Networks

Supply, Installation, testing and Commissioning of 50 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, testing and Commissioning of 80 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 24 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 24 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. Input Voltage: 230 V, A.C. Designed line pressure: 60 kg/sq cm. The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 24 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL /EMERSON/ROTORK/SD TORK

Supply, Installation, Testing and Commissioning of 4 pair CAT 6 UTP Solid cable with HD-PE insulating material having 23AWG Conductor Verified compliant with EIA/TIA standards by ETL for Sensors . Make : D Link/ Finolex/ Polycab / Belden

Supply only 2 Core 1.5 sq. mm PVC sheathed PVC insulated copper armoured cable. Make: Havells/Polycab/Gloster

Supply only 4 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable. Make: Havells/Polycab/Gloster

Supply only 6 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable. Make: Havells/Polycab/Gloster

Supply, Installation, testing and Commissioning of Pole structure and Metal cage for installation and protection of RF Antennas having galvanised iron light grade pipe 50 mm dia ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc mounted on metal plate grouted in earth. The pole should be tied with steel wire rope from both the sides. A metal cage of appropriate size should be fitted on top of pole for the protection of antenna from monkeys or other harmful objects.

Excavation in trenches not exceeding 1.5 meter wide and n. exc 1.5 meter deep in soft/loose soil for laying of pipe lines/ cables and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick after laying and testing of pipes complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meter and depositing where directed at level not exceeding 1.5 meter above the starting point complete all as specified and directed.

M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Note:- Punned (consolidated ) thicness of sand will be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-Charge

Supply and Fixing pipe galvanised iron light grade 20 mm dia ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed.

Supply and Fixing pipe galvanised iron light grade 50 mm dia ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed.

Pioneer Enterprises

Universal Switch Gear Control

Shree Ayyappa Engineering