PROVISION OF VISITORS WAITING ROOM AT TRAVANCORE GATE NAVAL BASE KOCHI AND PROVISION OF APPROACH ROAD AND SAFETY GRILL FOR STATIC TANK NEAR MT SECTION AT NAY KOC UNDER GE NW KOCHI

Amount

Excavation over area, n exc 1.5m deep and getting out in soft loose soil compleate all as specified and directed by Engr-in-charge.

Excavation over area, exc 1.5m deep and getting out in soft loose soil compleate all as specified and directed by Engr-in-charge.

Returning, filling in soil including watering and well ramming in layers not exc 25 cm compleate all as specified and directed by Engr-in-charge.

Removing excavated material exc. 250m but n exc. 500 m and depositing where directed compleate all as specified and directed by Engr-in-charge.

M&L sand slaked lime filling ( mixed in the ratio of 60:40) under foundations including consolidation compleate all as specified and directed by Engr-in-charge.

M&L for hard core of broken stone of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface compleate all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8 in foundations, filling and mass concrete compleate all as specified and directed by Engr-in-charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter compleate all as specified and directed by Engr-in-charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions compleate all as specified and directed by Engr-in-charge.

Formwork to sides and soffits of floor or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc for fair finished surfaces compleate all as specified and directed by Engr-in-charge.

Formwork to chajjas toughs and similar items including edges for fair finished surfaces compleate all as specified and directed by Engr-in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exc 200mm thick for fair finished surfaces compleate all as specified and directed by Engr-in-charge.

M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete compleate all as specified and directed by Engr-in-charge.

M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts compleate all as specified and directed by Engr-in-charge.

M&L for RCC M-30 Design mix concrete using 20mm graded stone aggregate as in lintel beam/copings compleate all as specified and directed by Engr-in-charge.

M&L for RCC M-30 Design mix concrete using 20mm graded stone aggregate for slabs supported on walls, beams and columns in floors, roofs landings, balconies compleate all as specified and directed by Engr-in-charge.

M&L for RCC M-30 Design mix concrete using 20mm graded stone aggregate as in chajjas compleate all as specified and directed by Engr-in-charge.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compleate all as specified and directed by Engr-in-charge.

All as above item no.9 but 5mm dia an over upto including 10mm dia in stirrups, spacers and binders compleate all as specified and directed by Engr-in-charge.

M&L Pre Cast cement concrete block masonry 1:3:6 with solid blocks, exec 10cm in width and setting in CM 1:6 compleate all as specified and directed by Engr-in-charge.

M&L for 15mm thk cement plaster with cement mortar 1:4 finished even and smooth with out using extra cement compleate all as specified and directed by Engr-in-charge.

M & L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima) paint over a coat of suitable primer over a coat of sealent base coat, complete all as specified and as directed by the Engineer-In-Charge.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls compleate all as specified and directed by Engr-in-charge.

M & L for preparation new wall surfaces and applying one coat of chalk whiting on new plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted all as specified and directed by Engineer in charge

M&L 10 mm thick plaster in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement compleate all as specified and directed by Engr-in-charge.

M&L for preparation of new surfaces (Ceiling) applying two coat of oil bound distemper over one coat of primer compleate all as specified and directed by Engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering compleate all as specified and directed by Engr-in-charge.

M&L for hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface compleate all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 Type B-2 using 40 mm graded stone aggregate as in floor/ paving/ hard standings and similar works compleate all as specified and directed by Engr-in-charge.

M&L for light shade vitrified cermaic tiles 10mm thick square area of each tile n.exc. 0.36 Sqm in floors etc set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade laid over 15 mm thick screed in CM 1:6 compleate all as specified and directed by Engr-in-charge.

All as per item No 30 here-in-before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:4 compleate all as specified and directed by Engr-in-charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of CM 1:6 compleate all as specified and directed by Engr-in-charge.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x7 mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick rendering CM 1:4 compleate all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 compleate all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints compleate all as specified and directed by Engr-in-charge.

M&L for preparation of two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth compleate all as specified and directed by Engr-in-charge.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing compleate all as specified and directed by Engr-in-charge.

S&F extruded aluminium alloy handle 150 mm fabricated type anodised for doors compleate all as specified and directed by Engr-in-charge.

M&L for 100 mm size, butt hinges medium weight cold rolled mild steel compleate all as specified and directed by Engr-in-charge.

M&L for 200mm long aluminium anodized barrel tower bolt of extruded section compleate all as specified and directed by Engr-in-charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed compleate all as specified and directed by Engr-in-charge.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc compleate all as specified and directed by Engr-in-charge.

S&F powder coated aluminium window and ventilator shutters, top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) compleate all as specified and directed by Engr-in-charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples compleate all as specified and directed by Engr-in-charge.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane compleate all as specified and directed by Engr-in-charge.

S&F viterous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern compleate all as specified and directed by Engr-in-charge.

S&F Vitreous China wash basin, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets compleate all as specified and directed by Engr-in-charge.

S&F 15 mm bore CP fancy type bib tap screwed down, screwed for iron pipes of brass ferrule and fixed compleate all as specified and directed by Engr-in-charge.

S&F 15 mm bore CP angle cock screwed down high pressure or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixed compleate all as specified and directed by Engr-in-charge. Make ESS-ESS or equivalent.

S&F brass chromium plated towel rail 20mm dia D type, 60cm long between flanges compleate all as specified and directed by Engr-in-charge.

S&F Vitreous China soap tray, approximate size 160x 160x90mm embedded in the wall compleate all as specified and directed by Engr-in-charge.

S&F health faucet with 1m tube and hook compleate all as specified and directed by Engr-in-charge.

S&F brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) compleate all as specified and directed by Engr-in-charge.

S&F CI floor trap with grating fixed in concrete 1:2:4 of 100 mm dia alongwith stainless steel grating compleate all as specified and directed by Engr-in-charge.

S&F 110 mm dia PVC SWR 'S' trap compleate all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC type C-2 1:3:6 using 40 mm stone aggregate as in plinth protection compleate all as specified and directed by Engr-in-charge.

M&L for forming 'A' grade Construction joint 30mm deep x 10mm wide filled with sealing compound compleate all as specified and directed by Engr-in-charge.

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane compleate all as specified and directed by Engr-in-charge.

M&L for 18/19 mm thick Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work compleate all as specified and directed by Engr-in-charge.

Extra over rates of particle boards for external teak wood lipping 6 mm thick fixed with nail for 18/19 mm thick boards compleate all as specified and directed by Engr-in-charge.

M&L Preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat over red oxide, zinc chrome primer compleate all as specified and directed by Engr-in-charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe410W Gde E2 50 quality B compleate all as specified and directed by Engr-in-charge.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 compleate all as specified and directed by Engr-in-charge.

S&F for Framed work such as framed and hung as gates, including pintle hinges, stops, hand-made sliding bolt conforming to Fe.290.Gde-E-165 compleate all as specified and directed by Engr-in-charge.

S&F for Expanded metal n.exc 4kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members compleate all as specified and directed by Engr-in-charge.

M&L for 2 coats of epoxy paint on new steel surfaces over a coat of epoxy primer incl preparation compleate all as specified and directed by Engr-in-charge.

M&L Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15cm deep and getting out compleate all as specified and directed by Engr-in-charge.

M&L for Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges compleate all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate 100mm thick as in plinth protection,path,pavings etc compleate all as specified and directed by Engr-in-charge.

M&L for coarse aggregate nominal size 6.3mm and below as in paving under floor spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required compleate all as specified and directed by Engr-in-charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment compleate all as specified and directed by Engr-in-charge.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed with proper colour coding FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade with suitable size concealed in wall /roof except beam, colum and RCC roof including chases cutting incl making good wall surfaces with existing surfaces and 1.6 mm thick MS sheet pressed terminal box (recessed) with 3 mm thick PVC laminated sheet top cover for accomading switches socket regulators etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for as the following compleate all as specified and directed by Engr-in-charge.- ( a ) one light point controlled one ,one way switch 5 Amp

( b ) One fan point controlled by one ,one way switch and regulator compleate all as specified and directed by Engr-in-charge.

(c ) All as per item No 73 her-in-before but for one 5 pin 5 amps socket outlet an independent board.

All as per item No. 73 her-in-before but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 AMp socket outlet point on independent board compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 5 pin 5 Amps flush type compleate all as specified and directed by Engr-in-charge.

S&F S/S combination 6 pin 15 Amps flush type multi purpose compleate all as specified and directed by Engr-in-charge.

S&F switch piano flush type 5 Amps one way compleate all as specified and directed by Engr-in-charge.

S & F ceiling rose surface bakelite 65 x 20 mm 3 terminals compleate all as specified and directed by Engr-in-charge.

S & F in repair fan regulator electronic step type 100 W, 250 Volts compleate all as specified and directed by Engr-in-charge.

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection compleate all as specified and directed by Engr-in-charge. Make : Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent Philips/ Crompton

S&F LED type mirror light fitting 14W with tube and provided with high output diffuser including all electrical connection all as specified and directed by Engineer in charge.Cat part no P27010 of wipro or Crompton/Philips

Supply and fixing ceiling fan complete with 300 mm/450 mm hanging Rod and accessories 230 V,1200 mm sweep.5 star rated compleate all as specified and directed by Engr-in-charge. Make CG Cat Part Energion HS BLDC/havells/usha.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver compleate all as specified and directed by Engr-in-charge. d Make Havells Cat Part turbo force SP /CG/usha.

S&F sheet metal enclosure for DBs and MCBs to be used double door type, 8 way with 200 Amps rated busbar of 240 Volts single phase compleate all as specified and directed by Engr-in-charge.

S&F MCB SPN 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr-in-charge. Cat part No -408617 of Legrand/ Indo Asian /L&T.

S&F MCB SP 6 to 32 Amp ,240 Volts,10 KA compleate all as specified and directed by Engr-in-charge.Cat part No -408595 of Legrand/ L&T/Indo Asian

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables heavy duty)1100 Volts grade with stranded aluminium conductor of size 2 core 10 sqmm laid in trenches/ ducts/ wall or through pipe etc with suitable lugs and cable glands compleate all as specified and directed by Engr-in-charge.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 4 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface compleate all as specified and directed by Engr-in-charge. Note - 2 runs of 4 Sqmm sub main wire and one run of 4 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 25x4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion compleate all as specified and directed by Engr-in-charge.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) compleate all as specified and directed by Engr-in-charge.

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge.

Supply & fix of bib cock long body chromium plated with flange and aerator CP fancy type of size 15mm compleate all as specified and directed by Engr-in-charge.

S&F Gunmetal globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes incl taking out old compleate all as specified and directed by Engr-in-charge.

Supply & fixing of low density polythene pipe 16mm dia (outer),450 mm long for normal water and taking down old one complete with brass union on both sides to suit 15mm GI pipe compleate all as specified and directed by Engr-in-charge.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11& plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge. Make:- Supreme

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings compleate all as specified and directed by Engr-in-charge.Make:- Supreme

Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and as directed by the Engineer-in-charge.(Make : Model No: F7020307 of Cera (shower head) & F7040202 (Shower arms) or prayag/hindware/Jaguar).

S&F Health faucet ABS body with wall hook & 1Mtr SS braided flexible tube complete. (Make-CERA Cat No- Cera F 8030102 ) compleate all as specified and directed by Engr-in-charge. including taking down old one

Supply and fix in repairs Ball brass valves (PTMT) of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed compleate all as specified and directed by Engr-in-charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position compleate all as specified and directed by Engr-in-charge.

THOMSONS CONSTRUCTIONS