PROVISION OF CHAIN LINK FENCING ALONG CHILDREN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.

S&F Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded aggregateas in foundation, filling in mass concrete for manholes & drains complete all as specified and directed by Engr-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

Material and labour for two coat of synthetic enemal paint on steel surfaces over a coat of red oxide primer Surfaces of any des-cription, over 10cm in width or grith, not otherwise described complete all as specified and directed by Engr-in-Charge.

Supply only MS screw bolts (Machine made) length of bolt exc 5 cm but not exc 10 cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 5 to 10mm complete all as specified and directed by Engr-in-Charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails & guides) and hanging also fastening & complete all as specified & directed by Engineer-in-charge.(Fe 410 -W (Gde- E- 250) quality-A) complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide ,etc. n getting out any type of Soil complete all as specified and directed by Engr-in-Charge.

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for Keyed pointing to to squared rubble, coursed or uncoursed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M/s Shri Inder Construction Company