Construction of twin D type Quarters building for Additional Tahasildar , Tahasil office, Panposh at Kuarmunda for the year 2025-26

Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other machineries required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge including 1% Cess.

Earth work in ordinary soil within 50 m. initial lead and 1.5 m initial lift including ressing & breading clods to omaximum 5cm to 7cm & laying in layers not exceding 0.3 M in depth & as per direction of the Engineer-in-charge.

Dismantling brick or stone masonry in lime or cement mortar under 3m.height including stacking the useful materials for reuse and removing the debris within 50m. Leadas directed by the Engineer-in-Charge including 1% Cess.

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials including 1% Cess.

Cement Concrete of proportion(1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, rammin including watering, curing with cost, conveyance, royality, taxes, labour, T&P and all other materials required for the work as per direction of the Engineer-in-Charge

Providing Cement Concrete (1:2:4) in foundation with 12mm size of crusher broken hard granite chips of approved quality from approved quarry including hoisting, lowering, and laying in postition in layers not exceeding 150mm. thick with proper packing and ramming to proper slope and level including watering, curing with cost, conveyance, royality, taxes, labour, T&P and all other materials required for the work, finishing the exposed surface smooth, providing grooves and beads where ever necessary etc. complete in all respect as per the specification and including 1% cess as per direction of the Engineer-in-Charge

Fly ash. brick works in cement mortar (1:6) after immersing brick for six hours in water before use with good quality kiln bunt brick of 9"sizes having crushing strength not less than 75Kg./Sqm including splays cutting ,circular moulding and similar such type of work with necessary projections, chamfering and corbelling, watering and curing etc. complete including cost, conveyance , royalties of all materials with cost of all labours,all taxes with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-charge.(In foundation and Plinth)

In Foundation

Ground floor

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering, and curing for four weeks finishing the exposed surface and ceiling smooth, providing grooves or beads where necessary including cost, conveyance royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect but excluding the cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. rods or tor steel and binding wires and tying the grills and placing in proper position in all floors.as per the specification and direction of the EIC.

Coloum base

Coloums & Beams

Plinth beam

Window Sill Band

Lintel

Chhajja

Roofslab

Stair case

Shalve

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) including 1% cess as per direction of the Engineer-in-Charge

12mm (½") thick cement plaster in cement mortar (1:6) finished smooth to external brick walls after racking out the joints of brick work with watering curing and cost conveyance, royality taxes of all materials all labour T&P etc. complete in all respect in floors etc. complete as per specification and direction of the EIC.

16mm (5/8") thick cement plaster (1:6) finished smooth to external brick wall surface after racking out joints including watering and curing with the cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per specification and direction of the EIC.

Providing, Fitting & Fixing of 8 mm. to 12mm. vertified tiles in floors of size 600x600mm of approved make with specification of polymer cement based water resistant adhessive bed of required thickness 10mm and filling joints with apoxy grout of approved quality including cost of all materials labour & T & P etc required fo rthe work.Providing, Fitting & Fixing of 8 mm. to 12mm.

Providing, Fitting & Fixing of 8 mm. to 12mm. tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.( Ceramic Tiles )

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-chargeetc complete as per direction of the Engineer-in-charge.

Wall painting two coats with any approved quality of Weather seal coat over a coat of priming on new work to give an even shade including cost of all materials,labour, T&p required for the work complete.

Finishing wall surface of walls with Acrylic wall puty ( Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with cost of all matyerials taxes, labour T & P etc complete.

Finishing walls with wall cement primer of water bound of approved shade on new work two coat to give an even shade inculding cost of primer.completed as per direction of the Engineer-in-charge.

Distempering two coats to wall with approved distemper of approved shade including cost, conveyance & taxes of all material, labour etc complete including 1% cess and as per specification and direction of the EIC

Finishing walls with weather coat of approved shade on new work two coat over acoat of primer to give an even shade including cost of all materials, labour charges, T&P etc required for the work complete. including 1 % cess. as per direction of the Engineer-in-charge.

Painting two coats with approved paint over a coat of primer of any approved shade with cost, conveyance, taxes of all materials, all labour and T&P required for the work including the cost of primer all other materials aetc complete including 1% cess as per direction of the Engineer-in-Charge

Providing door, window choukaths made in M.S angle & shutter made out of M.S. sheet including M.S. flat grill fixing with window choukaths with all cost, labour taxes etc. complete asper direction of Engineer-in-charge.

Labour for fitting and fixing of M.S. Door , Window & Grill as per required for the work etc. Complete.

Providing , fitting & fixing Steel Angle Iron doors & windows frame with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mm cornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coat of anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge including 1 % cess .

M.S. Door, Window & Collapsible Grill Gate

Supplying fitting fixing of 32mm thick flush door with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete.

Providing factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately)

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. .

Supplying, fitting afixing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm. and as per specification and direction of the EIC

E.I. Works

Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2)

-do- (Gr.B) (1.1.2-1.24.2)

-do- (Gr.C) (1.1.3-1.24.2)

S/F of M.S. Box for 2 Module 18 swg

S/F of M.S. Box for 4 Module 18 swg

S/F of M.S. Box for 6 Module 18 swg

S/F of M.S. Box for 8 Module 18 swg

S/F of M.S. Box for 12 Module 18 swg

S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Inverter Connection

S/F of 20 Amp AC Starter(Make Havells/Anchor or Equivalent)

S/F of 15A Socket on 2 module for AC

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 2X6 sqmm + 2 x 2.5 sqmm (1.8.4)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of MCB 8 Way Double Door (2.3.6)

S/F of 32 Amp rating "C" Series DP MCB (Make: L&T/Havells/C&S/Equivalent)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

Supply of 180mmx100mmx60mm deep(1.24.5) for fixing calling bell

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover.

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Fan hook S, Type on ceiling.

S/F of step type modular fan regulator

Supply of instalation, Testing commissioning of 12 Watt. LED bulb(Make:Havells/Polycab or Equivalent)

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/ HPL/Crompton/ Polycab/PAC)

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

S/F OF 900 VA Invertor with 1 no 180Ah Battery with trolly arrangement(Luminous/Microtek/Excide/V Guard)

S/F of 10W LED Bulk Head(Make -Havells/Crompton or Equivalent)

P.H Works

Supplying all materials labour T&P and filling F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per the direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following OD conforming to ISI No.13592/ 1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.

(a)110mm dia pipe

(b)110mm dia Door cross Tee

(c)110mm dia ‘P’ Trap

(d)110mm dia Door Bend

(e)110mm dia Offset

(f)110mm dia Plain bend

(g)110mm dia cowl

(h)110mm dia plain Tee

(i)125mm dia CP Grating

Supplying all materials labour T&P and fixing wash down water closet (Anglo Indian water closet)with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cm(1:1)etc. all complete as per specification and direction of E.I.C.

(a)E.W.C. with ‘S’ Trap with sheet cover(make- parryware)

Supplying all materials labour T&P and fixing water closet,squatting pan(Indian type WC. pan/Orissa pattern squatting pan) duly embedded in cc(1:5:10)using 4cm hg. metal all complete as per the direction of E.I.C.

(a)580mm Orissa pan(make- parryware)

Supplying all materials,labour,T&P and fixing kitchen sink with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.

(a)600mmx450mmx200mm Steel sink with 40mm dia CP west,west pipe and brackets.(Mousumi make)

Supplying all materials,labour,T&P and fixing wash basing with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.

(a)550mmx400mm W.H.B. with 32mm dia CP west, west pipe,brackets and connection pipe .(make- parryware)

(b)Pedestrial for W.H.B. (make- parryware)

Supplying all materials,labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E.I.C.

(a)600mmx450mm B.E Mirror

Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.

(a)(125x450)mm size glass-shelf with CP Guard rail(Jaquar Make)

Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP Brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.

(a)25mmx600mm long CP towel rail(Jaquar Make)

(b)CP Towel Ring(Jaquar Make)

Supplying all materials,labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P.H. specification and direction of E.I.C.

(a)CP Soap holder(Jaquar Make)

Supplying all materials labour T&P and cutting holes through brick/stone masonary walls for taking HCI/PVC and fittings including making good the damages etc. all complete as per PH specification and direction of E.I.C.

(a)375mm thick wall

(b)Roof cutting

Supplying all materials labour T&P and fixing Digital tiles in floors,threads, landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C.

Supplying all materials labour T&P and fixing porcelain glazed tiles in dados skirting and risers of steps on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221with tapered clip no 4660 & frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C.

S.D. PORTION:-

Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1stclass KB brick work in cm(1:6)moulding & shaping the channel inside and benching with cc(1: 1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside, cement flush pointin(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC man hole cover,e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.

(a)Inside size 760mmx760mmx460mm

Supplying all labour T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonary brick work gravel packing in the rear of well steining RCC cover slab in cc(1:1.5:3)using 12mm size hg chips fitted handles including e.w. in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all meterails to work site, payment of royality,taxes etc. all complete as per approved drawing specification and direction of E.I.C.

(a)1.20m dia x 2.00m deep

Supplying all materials labour T&P and laying PVC pipe sewer line,Grade-A of the following internal dia in trenches (to level or slope)and jointing with gasket & stiff mixture or cm(1:1),cc(1:3:6)with 40mm size h.g. metal on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size hg. metal including curing,conveyance to workside,payment of royality,taxes etc and testing all complete as per approved drawing,specification and direction of E.I.C.

(a)160mm dia PVC pipe with allround encasing

10 USER SEPTIC TANK:-

Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.

(a) Initial lift upto 1.50m

(b) From 1.50m to 3.00m depth

Supplying all materials labour T&P and providing cc(1:3:6)using 4cm h.g metal including watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing brick work with flyash Bricks in cm(1:4)F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C.

Supplying all materials,labour T&P and providing 12mm thicks CP(1:3)with punning on brick/stone work including watering,curing conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing rigid & smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding and tying the grills & placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6) all complete as per PH. specification and direction E.I.C.

Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C.

Supplying all materials,labour,T&P and providing fitting & fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3)with 12mm size hg chips all complete including watering,curing,conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

(a) 160mmx160mm x160mm PVC Tee

Supplying all materials labour T&P and Providing cement flush pointing(1:3)to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/ST & finishing smooth all complete as per specification and direction of E.I.C.

Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C.

W/S SUPPLY PORTION:-

Supplying all materials,labour,T&P and construction of masonry staging with providing 1stclass KB brickwork in cm(1:6)of 0.46m height in staging,12mm CP in cm(1:6),RCC Beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending&binding of rod etc watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

(a)Stagging for 2000Ltr. Storage Tank

Supplying all materials,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

(a)2000Ltr. Capacity Water Storage Tank

Supplying all materials,labour,T&P and fitting & fixing 10ltr. capacity low level flushing cystern with a pair of ms clamps complete with fittings such as syphonic arrangements 15mm nominal size PVC ball valve with polythene float,PVC handle,union and couplings for connection with inlet,outlet and overflow pipes, 32mm dia CP flush bend,15mm dia,PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C.

(a)10Lit. PVC Cistern(Parryware make)

Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C.

(a)25mm dia C-PVC pipe(External

(b)20mm dia C-PVC pipe(Internal)

Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C.

Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc.complete as per P.H. specification and direction of E.I.C.

(a)15mm dia CP Bib cock(make-Jaquar)

(b)15mm dia CP Two way Bib cock(make-Jaquar)

(c)15mm dia CP(L.B)Bibcock(make-Jaquar)

(d)15mm dia CP wall mixture[2-in-1]

(d)15mm dia CP Pillar cock (make-Jaquar)

(e)15mm dia CP Angle Stop cock(make-Jaquar)

(f)15mm dia CP Concealed stop cock(make-Jaquar)

(g)15mm dia CP Revolving Shower with shower Arm(make-parry ware)

(h)15mm dia Health Faucet & 1.0m long Flexible pipe(make-Jaquar)

(i)25mm dia U-PVC F.W.V.

Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit /Hour & a head-55/70mtr.of reputed make(CRI/KSB/Texmoor equivelent Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour T&P and fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials labour T& P and fitting&fixing plastic rope with MS well cover,MS Clamp,stainless steel short piece,Bend & socket,union including all cost conveyance & taxes etc. all completes as per PH. Specification direction of E.I.C.

Supplying all materials labour T&P and fitting&fixing of HDPE pipes & pipe fittings with making connection to pump set including all cost conveyance & taxes etc.all completes as per P.H. Specification direction of E.I.C.

125mmx100mm Size ODEX Bore Well

Supplying all materials Labour T&P and drilling perfectly vertical bore hole in boulder formation areas with drawn the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig necessary accessories and consumables for a specified depth below GL including supply of necessry casing shoe,odex tools & plants,jointing materials,extra sockets where required with drawing of pipes lowering the MS(ERW)pipes & fitting & fixing in perfectly vertical position including cutting & welding for jointing the pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock and to drill 125mm DTH upto the desired depth as may be necessary, cleaning the site and washing bore etc. all complete providing sanitary sealing upto 5metres depth below GL as per the direction of E.I.C.

(a)Drilling of 125mm. dia. Bore

(b)Drilling of 125mm dia.Bore

Lowering the folloing size GI/PVC pipes with without slotted pipes as per the necessary from GL up to 30mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipe and supply and fixing all jointing materials tools and plants etc. complete and keeping the top plugging tube wells to prevent entry of foreign materials from above.

Lowering of 125mm dia MS pipes:

(b)Cost of 125mm dia MS casing pipe

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C.

(a) Developing the tube well