CA NO GE SOUTH AMB 05 2020 2021 REPAIR TO ROOF AND FALSE CEILING IN SUB SECTOR I OF AGE BR II AND CONNECTED ITEMS OF EM UNDER REPAIR IN CEILING UNDER GE SOUTH AMBALA CANTT

Amount

Dismantling of brick or terracing tiles of single layers on roofs including old tarfelt and removal from site, complete all as specified and directed.

Dismantling / taking out old tarfelt including bedding layer under it, complete all as specified and directed.

Demolition of mud in roof any thickness including leeping plaster and removal of the same outside defence land for disposal complete all as specified and as directed.

M&L for 40mm thickness PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in levelling padding course over RCC roof surface mixed with and including approved water proofing compound liquid base all as per manufacturer's instructuion, surface to be finished even and smooth using extra cement complete all as specified and directed.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges to mix type B1 (1:2:4), using 20 mm graded crushed stone aggregate complete all as specified and directed.

M&L for applying evenly a tack coat of industrial primer Bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

Material and labour for providing 3 mm thick APP(Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyster matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscocity 70-160 Cps. over the primer coat of industrial bitumen 85/25 @1.2 ltr /kg, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete as per standard practice as per manufactuter's instructions all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under : - (i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms. (ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexiblility up to 20º when tested in accordance with ASTM (D-5147). (iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only with Gurantee of 10 years by contractor.

M&L for 40mm thick brick tiles , bedded in cement mortar (1:6), 15mm thick and joints, grouted in cement mortar (1:3) complete all as specified and as directed.

All as per item No 8.00 here-in-above but except brick tiles, complete all as specified and as directed. NOTE: - Brick tiles as obtained from item No 1.00 here-in-above shall be used.

M&L for providing solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm over the membrance (In Accessible roof )all as specified and directed.

Disconnecting existing tanks exc 250 and not exceeding 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

All as per item No 11.00 above but exceeding 500 and not exceeding 1000 ltrs capacity complete all as specified and directed.

Cleaning removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc tank size exc 250 and not exceeding 500 ltrs capacity complete all as specified and directed.

All as per item No 13.00 above but exc 500 and not exceeding 1000 ltrs capacity complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Description all as per item No 16.00 above but except bricks including cleaning, removing mortar from the bricks complete all as spd in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubbing down with water etc of any thickness of any description complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4, finished even and smooth using extra cement complete all as specified and directed.

Material and labour for two coat of cement base paint over a coat of alkali resistant primer over newly plastered surface including preparation of surface complete all as specified and directed

Dismantling of timber scantling 40sqcm and over in section in any position framed work complete all as directed.

Dismantling of mild steel work of any description and in any position not other wise specially provided for, complete all as specified and directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 Gde E-250 complete all as specified and directed.

S&F for wind ties for roof including securing bolts, cutting tops to shape as directed, drilling holes, including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material and Labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and as directed.

M&L for new or previously untreated steel surfaces of any description, not over 10cm in width or girth, not otherwise described and applying of two coats of synthetic enamel paint over one coat of red oxide, zinc chrome including preparation complete all as specified and directed.

Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets, in patches, fixed with L or J type hook bolts in roofs complete all as specified and directed.

Supply and fixing prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing prepainted aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for AC two piece adjustable Serrated ridge fixed with L type or J type hook, fixed in repair complete all as specified and directed.

Extra over brickwork for closing cavity at jambs, cills and heads of opening etc. (supply and fixing of flashing etc not included) complete all as specified and directed.

M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate as copings, kneelers, apex stones, bed plates etc including necessary form work complete all as specified and directed.

S&F for Mild steel screw bolts 11 to 15 dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets, etc complete all as specified and directed.

Supply & fix aluminium snap grid frame work of size 605x605mm for false ceiling comprising L- Section of size 1"X1" (25mmX25mm, 1mm thick) aluminium angle fixed along wall at ends and with aluminium T section 1" x1" (25mmX25mm,1mm thick) mm in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of G.I hook or G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. complete all as specified and directed.

Supply & fixing 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework including prepration of surface and applying two coats of OBD over a coat of primer on visible face of board complete all as specified and directed.

M & L for 12mm Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, inserted to timber/GI/Aluminium framework including prepration of surface and applying two coats of OBD over a coat of primer on visible face of board complete all as specified and directed.

Supply and fixing 12mm thick gypsum board false ceiling fixed to and including GI frame work, for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flangs of 15 mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel at 457mm centre to centre including 6mm dia GI hanger fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia long and including preparing the surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer on visible face of board, complete all as specified and directed.

Resecuring/ adjusting existing false ceiling grid any type and making reqd tightening to remove sag portion/ depression in false ceiling grid including replacement of missing sections/suspenders etc complete all as specified and directed.

Supply & fixing in repair 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework including prepration of surface and applying two coats of OBD over a coat of primer on visible face of board (Used in patches after repairing / resecuring / adjusting existing ceiliing grid missing / broken ceiling tiles) complete all as specified and directed.

S & F in repair 12mm Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, inserted to timber/GI/Aluminium framework including prepration of surface and applying two coats of OBD over a coat of primer on visible face of board (Used in patches after repairing/resecuring/adjusting existing ceiliing grid missing/ broken ceiling tiles) complete all as specified and directed.

Supply and fixing in repair Perforated TEGULAR EDGE TILES of size 600x600x0.5mm in global white Powder Coated fixed in existing frame work incl reqd fixtures (Used in patches after repairing/resecuring/adjusting existing ceiling grid or missing/broken ceiling tiles) complete all specified and directed.

Supply and fix in repairs false ceiling at all heights of perforated with fleece 595 x 595 x 0.5 mm TEGULAR EDGE TILES in global white Powder Coated with 60-70 Micron front coating laid, humidity resistance (RH) of 100%, light reflection of 62%, backing of rock wool pads to have max NRC 0.8laid on and including regular 25mm with T section flange color white having rotary stitching on the main runner with web height 26 mm, exposed gird system including frame work comprise of main runner spaced at 1200 mm max (centre to centre). Hangers (GI wire of 4 mm dia) to be fixed by hiliti of HLS sleeve anchor fastener of thread size 6.5mm x 25/5 with cleat made of galvanised steel of size 27 mm x 37 mm x 25 mm x 1.6mm and level clip in dimensions of 85mm x 30mm x 0.8mm at 600 x 1200 intervals. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees (with double stitching) to be interlocked between main runner at 600mm shall be 'T'shape section with single rotary stitching made of GS sheet and of size 15 mm x 32 mm and 3000 mm long, crossed runner shall be 'T' shaped with double rotary stitching made of GS sheet and size 15 mm x 32 mm x 1200 mm long and perimeter wall angle shall be made from GS sheet and of size 19 mm x 19 mm and 3000mm long, colour white, centre to form 600 mm x 600 mm modules, cut cross tees longer than 600 mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees, instructions and specified and directed. Perimeter trim to be wall angle secured to walls at 450mm max (centre to centre), including PVC clips to hold the ceiling tile, complete all as per manufacturer instructions, complete all as specified and directed.

M&L for Rajshri brand PVC false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. Complete as per direction of Engineer-In- Charge, Manufacturer, s specification and drawing.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing complete all as specified and directed.

S&F 110mm bore PVC rain water pipe type 'A' single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc. complete all as specified and directed.

S&F 110mm dia PVC bend type 'A' any radius with or with out access doors etc, completed as specified and directed.

M&L for cutting channels, grooves etc in existing wall, floors etc girth exceeding 15cm but not exceeding 30cm and trimming surface and make the surface good to match with existing surface completed as specified and directed.

S&F for supports or stays for rainwater, ventilating pipes, including bolts, if required: sliding bolts; clamps; hold fasts; wall ties; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

E&M PORTION : -

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25 mm dia with FRLSH )accessories, concealed on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. NOTES : - Switch, socket and fan regulators to be measured and paid for separately . MAKE: - Plaza / Havells or equivalent as specified in list of makes.

Description all as per Srl item No. 54.00 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed.

Description all as per Srl item No.54.00 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed.

Description all as per Srl item No. 54.00 here in before but one bell point controlled by one bell push complete all as specified and directed.

Description all as per serial item No. 54.00 above but with 2.5 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed.

Supply and fixing switch piano 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing switch piano, bell push, 6 Amps , flush type, 230V, 50 Hz supply, complete all as specified and directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing switch piano 15 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing socket outlet 3 pin 6 amps, 230 volt. flush type, ISI Marked. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing socket outlet 5 pin 16 amps, 230 volt. flush type, ISI Marked. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing fan regulator step type 2 module, complete all as specified and as directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing lamp holder/angle holder , PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified and as directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fixing Bell electric , SP, ding dong type, 240V, ISI Marked complete all as specified and as directed. MAKE : - CONA/SSK/ANCHOR or equivalent as specified in list of makes.

Supply and fix in repair channel for fixing of LED tube rod, aluminium housing body in CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. ( Tube rod shall be measured and paid for separately ). MAKE : - Havells Cat Part No LUMILINEPLUSBS18WLED865SPCSS/Bajaj Cat Part No BLRB-DB118"112181"/Wipro Cat Part No LL20-221-XXX65NE3 or equivalent as specified in list of makes.

Supply and fix in repair 18 W/ 20W Polycarbonate LED tube light, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings . MAKE : - Havells Cat Part No PHOTONULTRA1213T8SSTL18WLED865SPC / Bajaj Cat Part No BLRB-18W CW LED "112066"//Wipro Cat Part No LL13-181-650 or equivalent as specified in list of makes.

Supply and fixing decorative surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removal complete all as specified and directed. MAKE : - Havells Cat Part No LUMILINEPLUSBS10WLED865SPCSS/Wipro Cat Part No LW07-141-XXX-57-XX/Philips Cat Part No WT 202W LED65 CW PSU S2 or equivalent as specified in list of makes.

Supply and fixing recess/ surface mounted LED flat panel 2' x 2' with high efficent LEDs and glare free full window RADIANCE-OPAL decorative light fitting, 36 watt, energy efficient provided with including LED 36 watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and directed. MAKE : - Havells Cat Part No PLUTONEO2X2PLR34W LED840S /Wipro Cat Part No LW07-141-XXX-57-XX/Philips Cat Part No WT 202W LED65 CW PSU S2 or equivalent as specified in list of makes.

Material and labour for sheet metal enclosure SPN with two pin and earth plug and socket with one single pole MCB 32 Amps, complete all as specified and directed. MAKE : - Indo Asian/Legrand/L&T or equivalent as specified in list of makes.

Material and labour for sub main wiring with two single core FRLSH (Fire Retardant Low Smoke Halogen), PVC insulated unsheathed copper conductor cable 6 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. Note- Two run of 6.0 sqmm and One run of 4 Sqmm cable with concealed conduct shall be measured as 1 unit. MAKE : - Plaza / Polycab /RR or equivalent as specified in list of makes.

Material and labour for sub main wiring with two single core FRLSH (Fire Retardant Low Smoke Halogen), PVC insulated unsheathed copper conductor cable 4 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. Note- Two run of 4.00 sqmm and One run of 2.5 sqmm cable with concealed conduct shall be measured as 1 unit. MAKE : - Plaza / Polycab /RR or equivalent as specified in list of makes.

Material and labour for sub main wiring with two single core FRLSH (Fire Retardant Low Smoke Halogen), PVC insulated unsheathed copper conductor cable 2.5 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed Note- Three run of 2.5 Sqmm cable with concealed conduct shall be measured as 1 unit. MAKE : - Plaza / Polycab /RR or equivalent as specified in list of makes.

M/S SHANTI CONSTRUCTION

PARVEEN KUMAR

M/S JAISANT CONSTRUCTION CO.

Durga Enterprises

m/s parmod kamar