Construction of Nagarpalika Library at Devbhoomi Dwarka, Dist. Devbhoomi Dwarka

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (C) By

1 mechanical means in area of light jungle

Excavation for foundation upto 1.5 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 Cmt 441.20 627.47

Meter lead.(E) Hard Rock

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

3 out and stacking of useful materials and disposing off the excavated stuff Cmt 157.70 651.26

upto 50 Meter lead.(E) Hard Rock

Filling in plinth and foundation with sand under floors including

watering ramming, consolidating and dressing complete

5 20cm. thickness including watering, ramming and consolidating etc. Cmt 558.50 301.78

complete. (more than 10 ton)

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistent with I.S.I specification. Using Chlordane and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

7 percent is recommended i.e one liter 20 EC chemical emulsion with 19 Smt. 276.20 124.35

liter give 1 % concentration inclusive of one liter chemical emulsion

application at the rate of 5 Liter chemical/ Sqm of surface is

recommended as per I.S. (The Product performance shall carry Guarantee

for 5 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

8 4- graded stone aggregates 20 mm nominal size) and curing complete Cmt 153.00 3,784.74

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand :

9 6- crushed stone aggregates 20 mm nominal size) and curing complete Cmt 0.00 4,130.19

including cost of formwork in (A) Wall Caps / Coping

GRADE SLAB (M200) : Providing and laying controlled cement concrete

M.200 Concrete with all lead, including all transportation, pumping,

10 pouring, curing of concrete etc complete including the cost of formwork Cmt. 36.50 4,868.00

but excluding the cost of reinforcement for reinforced concrete work in

M200 Grade Slab

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

11 vibrator curing centering & shuttering in true line and level etc, but Cmt. 97.20 4,797.50

excluding the cost of reinforcement for RCC work in Foundations footings,

base of columns and Raft etc., for any type of cross section area complete

as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

12 vibrator curing centering & shuttering in true line and level etc, but Cmt. 11.00 6,866.99

excluding the cost of reinforcement for RCC work in column up to plinth

lvl. etc., for any type of cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

13 vibrator curing centering & shuttering in true line and level etc, but Cmt. 37.70 6,787.20

excluding the cost of reinforcement for RCC work in TIE, GROUND, &

PLINTH BEAMS for any type of cross sectional area. etc., complete as

directed by E. I. C.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

14 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical and Cmt. 28.50 7,980.82

horizontal fins)., & (F1) Wall cap & coping up to G.F. level., etc. Complete,

as per detailed & directed by Architect / Consultant & and directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

15 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical and Cmt. 2.50 8,022.23

horizontal fins)., & (F1) Wall cap & coping For First Floor level., etc.

Complete, as per detailed & directed by Architect / Consultant & and

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

16 excluding the cost of reinforcement for RCC work in (F) Wall (Vertical and Cmt. 0.20 8,063.64

horizontal fins) & (F1) Wall cap & coping For For Second Floor level., etc.

Complete, as per detailed & directed by Architect / Consultant & and

directed by EIC.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area for G.F. Lvl. etc., for any type of cross

section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area Work at First floor etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area Work at Second floor etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, LINTEL

& SILL & COPING for all cross sectional area at G.F. Lvl. etc., complete as

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, LINTEL

& SILL & COPING for all cross sectional area at F.F. Lvl. etc., complete as

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in LINTLE-BEAM, LINTEL

& SILL & COPING for all cross sectional area at S.F. Lvl. etc., complete as

directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing

Complete for reinforced concrete Chhajjas up to all floor two level

including finishing the exposed surfaces with cement mortar 1:3 (1-

cement, 3 Fine sand) to give a smooth and even surface centering and

formwork and curing complete excluding cost of reinforcement. etc.,

complete as directed by E. I. C.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS for

Ground floor & Super structure, & for any type of cross sectional area. etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS at First

Floor & for any type of cross sectional area. etc., complete as directed by

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SLAB BEAMS at

Second Floor to Terrace Floor & for any type of cross sectional area. etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in Staircase with steps /

Kadi Tappa, waist slab and landing at any height and level as directed etc.,

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work at Plinth to Ground

FLOOR SLAB for all thickness/cross section etc. complete as directed by E.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

29 vibrator curing centering & shuttering in true line and level etc, but Cmt 33.40 6,851.34

excluding the cost of reinforcement for RCC work at FIRST FLOOR SLAB for

all thickness/cross section etc. as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in SECOND FLOOR SLAB

for all thickness/cross section etc. complete as directed by E. I. C.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

31 bending, binding and placing in position complete upto ground floor level Kg 34195.00 77.29

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

32 bending, binding and placing in position complete upto First floor level Kg 10883.00 78.34

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

33 bending, binding and placing in position complete for Second floor to Kg 3813.00 79.39

terrace floor Lvl.

Brick work using common burnt clay building bricks having crushing

34 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Cmt 43.70 4,214.33

Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement

Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor etc.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar

1:6 (1-Cement :6-finesand) (B) Conventional For First Floor etc.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. at Second floor to terrace floor Lvl.

37 in cement Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For above Cmt 26.40 4,580.91

First Floor to Terrace Floor etc. Complete, as per detailed & directed by

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Half brick masonry in common brunt clay building bricks having

38 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Smt 117.00 684.26

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Ground

Floor level.(B) Conventional

Half brick masonry in common brunt clay building bricks having

39 crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Smt 98.00 690.57

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at First to

Terrace Floor Lvl.(B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Terrace

Floor Lvl.(B) Conventional

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height

41 with all labour & material, etc. Complete, as per detailed & directed by EIC. Smt 223.30 326.13

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering for Ground floor level

and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering for First floor level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering at Second Floor to

Terrace floor level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

45 Ceiling for interior plastering for Ground Floor level and finished even and Smt 293.30 148.00

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

46 Ceiling for interior plastering for First Floor level and finished even and Smt 266.60 171.89

smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing 10mm thick cement plaster in single coat on brick/concrete

Ceiling for interior plastering at Second Floor to terrace floor Lvl. and

finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)

Providing and applying ready mix concrete plaster on RCC elements to

give expose finish including 2mm thick base coat of same material and

48 3mm thick top coat of concrete platser of approved shade and brand. Job Smt 456.60 1,016.12

includes proper griding of RCC joints before applying plaster complete

with scafolding directed as per Architect and EIC

Providing 20mm thick double coat external cement plaster on brick/

concrete work for plastering comprising of base coat of 12mm thick

49 cement plaster in cement mortar (1 Cement:4 coarse sand) in rough Smt 552.90 283.95

finishing and 8mm thick top coat of cement mortar 1:2 (1 Cement:

Coarse sand) finished rough / with Trovel including scaffolding curing etc.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1

cement : 4 coarse sand ), furrowing the under layer with scratching tool,

applying cement slurry on the under layer @ 2 Kg of cement per square

50 metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse Smt 508.40 995.30

sand : 2 stone chipping 10 mm nominal size), in panels with groove all

around as per approved pattern, including scrubbing and washing the top

layer with brushes and water to expose the stone chippings ,complete as

per specification and direction of Engineer-in-charge

Add for plaster groove in plastered surface or moulding to R.C.C.

projections.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

52 L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with Smt 486.90 1,018.92

grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A)

25mm thick

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

53 Cement : 3 coarse sand) and jointed with gray cement slury mixed with Smt 41.90 1,144.15

pigment to match the shade of slab including rubbing

and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

54 fixing on existing flooring by adhesive material including dismentaling of Smt 33.50 1,467.72

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit.

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or

as specified in skirting risers of steps and dedo on 10mm thick. cement

55 plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement Smt 250.90 1,195.02

slurry as per the detailed by Architect & direction of Engineer-in- Charge.

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps

and landing laid on a bed of 12mm thick Water proof cement plaster with

mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical Agent

56 and cement vata (10cm. x 10 cm. size) quarter round in cement mortar Smt 34.00 1,233.51

1:1 including neat cement finishing, watering etc. complete finishing with

flush pointing in white cement. (For UG tank flooring)

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps

and dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-

57 cement : 3- coarse sand ) & Water Proofing Chemical Agent and finishing Smt 99.00 1,272.55

with flush pointing in white cement. (For UG Tank walls)

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut

Granite of any colour and shade, & finish, as per detailed by architect /

Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen

platforms, vanity counters, window sills , fascias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick

58 mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on Smt 159.00 3,400.27

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement :

coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO

mm as per detailed groove, rubbing, curing, moulding and polishing to

edges to give high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5

laid over and jointed with grey cement slurry including rubbing and

59 polishing etc. complete. (B) 30mm thick. Smt 106.00 1,080.68

Providing and fixing sandwich type platform including supplying and

fixing granite stone 18 mm thick mirror polished stones in top and side

position and vertical strip at front over 25 mm thick polished kota stone

60 platform fixing in top and sides and intermediates supports fixing with Smt 3.00 7,478.49

cement mortar and adhesive and finishing including making recess for

Kitchen/ Laboratory sink etc. complete as approved and directed by

Consultant / EIC.

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

61 surface using white cement including rounding off junctions and Smt 275.30 779.70

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed. (The Product performance shall carry Guarantee for

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-

62 coarsesand: 4-graded stone aggregate 20mm nominal size) laid in one Smt 29.30 339.08

layer and finished with a floating coat of neat cement. (B) 50mm thick.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in

position with hold fast lugs or with dash fasteners of required dia &

length Incl. Providing and fixing 35 mm thick (or as specified) ISI marked

flush door shutters conforming to IS : 2202 (Part I) decorative type, core of

block board construction with frame of 1st class hard wood, with 1mm.

63 thk, ISI marked designed laminate in any finish on both faces of shutters., Smt 41.20 6,771.29

slit openings with bidding Patti & 6mm thk designed acid wash glass,.

Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with necessary

screws, using branded S.S. matt /glossy / platinum finished accessories,

Colour / polishing all bidding parts, and also incl. with all Material,

labour, tools, tolerance, scaffolding etc. complete as per concept

/direction and approved by Architect, and directed by Engineer-In-

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-

DOMAL Series OR Equivalent), hI-perfomance Sliding/ Openable

window/door with Required thick toughened designer glass of Saint

Gobain or equielent, is used for Aluminum Hi-Profile Section with

necessary accessories and with additional shutter with Stainless Steel

Mosquito net. [In Opening Position always one of Mosquito net shouter

should be in Close Position], captive bead, extremely difficult to remove

once glazed, high performance weather stripping, internal wedge gasket,

64 Bottom, side and top section including necessary filling up the gaps at Smt 112.40 7,742.61

junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx.

Premium" Required Finish door fixture Accessories As per Architect

Concept, High security interlocking bead, Sheet membrane flashing , 2"

over jamb flashing, New Blocking with new backer rod and sealant,

channel glide with runner, slide fold hinge when ever need of sufficient

capacity, with warranty, all types of material, labour, transportation, tools

tolerance and matching required level with Flooring etc. complete as per

Architect concept and as per detailed by Architect / consultant & Directed

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing and fixing hydraulic door closer of approved size and make as

directed engineer in charge. all lift, level and leads.

Providing & Fixing M.S. grills of required pattern to wooden frames of

windows, RCC or as specified in drawings etc. with M.S. flats at required

spacing & frame around, square or round bars with round headed bolts &

67 nuts or by screws (A) Plain Grill, as per detailed & directed by EIC. Kg 3295.00 109.08

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel section,

Bar , hollow box or Z purloins, Round or Square Pipes, of approved make,

for built up purloins, roof trusses, columns, side runners, tie beams, sag

rods, base plates gusset plates, cap plates, bearing bracing, gantry

girders, rails, require support, pipes, including all welded or bolted steel

structures of various types with approved I.S.I. mark electrodes, bolts,

anchor bolts including cost of thread, Anchor plate cleats etc. in RCC or

68 masonry work, including cutting, bending, welding ,fixing, supplying , Kg 1756.00 131.83

Fabricating Decorative fevisted section or any structured member required

to complete the job for Bridge, Trusses, Canopy, doors, Frame, Railing,

Entrance gate, pergola, Decorative hanging light , New window, parking

shed or space frame or any other required specified area as shown on

drawing and detailed specification or as per design incl. three coats of

approved brand primer and two coats of paints, necessary scaffolding,

tools tolerance etc. complete as directed by Engineer In Charge. (payment

will be made for weight of metal used in the work)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Finishing wall with Weather proof exterior emulsion paint on wall surface

69 (two coats) to give an required shape even shade after thoroughly Smt 601.10 120.26

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Wall painting (two coats) with plastic emulsion paint of

approved brand & manufacture on undecorated wall surfaces to give an

even shade including thoroughly brushing the surface free from mortar

droppings & other foreign matter & sand papered smooth, as per detailed

& directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Ceiling painting (Two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling surface to give

an even shade including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth, as per

detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter.

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat 15-18 micron. The PPGI

Sheet shall have plastic protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed to the steel

members by pop rivet or self drilling/self stitching fastners @ maximum

450 mm c/c along length of capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia

SS pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade

with glossy finish consisting of 32 NB or nearest size vertical posts

Height at maximum spacing 900c/c with suitable cups at bottom and top

rail of 50 NB or nearest size & intermediate rails of 16 NB or nearest size

etc complete] with complete assembly of SS studs to house the horizontal

74 16mm pipes and top handrail, bend and coupler to be used as per Rmt 51.80 3,646.91

architectural detail drawings for the railing in parapet, stair etc. including

fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in

RCC or masonry in true line level and plumb, including complete

assembly, including matt polishing and buffing complete, including

scaffolding etc. complete as directed by EIC.(Actual length of stair railing

shall be measured at site & same shall be paid. No wastage should be

measured or paid.)

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304

grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB

or nearest size complete] with complete assembly, bend and coupler to be

used as per architectural detail drawings for the railing in parapet, stair

75 etc. including fabricating, hoisting, fixing in position with angle cleats, Rmt 38.30 1,356.18

holdfast etc. in RCC or masonry in true line level and plumb, including

complete assembly, including matt polishing and buffing complete,

including scaffolding etc. complete as directed by EIC.(Actual length of

stair railing shall be measured at site & same shall be paid. No wastage

should be measured or paid.)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade

Board using 2mm Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm.

Descaling and degreasing the board as per requirement using epoxy

reflactive process by screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary excavation curing etc. Smt.

complete as per I.R.C. 67-2012 design. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified copy of

3 year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sq.m to achieve the required minimum DFT of

1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

77 3. Elongation % ≥ 700% Smt 296.30 979.14

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length, 30cm height and 15cm thick of M200 grade

79 concret as per approved design and including excavation for fixing in Rmt 100.00 400.87

proper line and level, filling the joint with C:M 1:3 (1 cement:3 fine sand)

etc complete.

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M-20 Cement

Concrete laid in required slope at concrete floor as directed and specified

using necessary steel form work with M.S. Channels including forming

construction & contraction joints 4 mm to 6mm wide by cutting the floor

up to ¼ th depth of thickness of the concrete depth using mechanical saw

and sealing the joint with poly sulphide sealant up to full depth of cutting

80 including providing & fixing M.S. dowels bars with bitumen painted of full Cmt 14.40 7,317.60

length as shown in drawing as to form the bays not exceeding 6.0 m X

4.5 m etc. complete as per directed by Architect or Engineer-In-Charge.

For all level and leads.(a) For RCC Road Note: Rates are Incl. cost of

Cement Concrete Pavement shall be 150mm. Thk. or as detailed and

rolling 2 times as per mentioned above and also all tools tolerance,

shuttering, channel, etc. complete as per detailed & Directed by Architect

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR

type B pipe confirming to IS 13592-1992 with one end plain & other end

socket with rubbering & Fixing conforming to ISI 14735-1999 of approved

make for drain system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using PVC clamps of the size

81 160mm dia x 210mm length x 196mm high at every 2000mm centre to Rmt. 57.50 876.90

centre or shall be concealed in wall as directed necessary fittings such as

bends, shoes, etc. incl. testing of pipe & joint & jointed with adhesive

solvent, cement incl. cost of all material etc. complete as per detailed,

directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as

82 per IS 9079 at departmental stores with following MOC: Casing: CI-FG260, Nos 1.00 24,240.00

Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Control panel- DOL / Star Delta starter suitable for local & remote pump

control application consisting of MPCB, overload relay and contactors as

83 per Type II coordination including digital voltmeter, analogue ammeter Nos 1.00 6,993.24

accessories.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

84 metre C/C or shall be concealed as directed including necessary fittings Rmt. 90.00 280.23

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

85 metre C/C or shall be concealed as directed including necessary fittings Rmt. 37.50 72.65

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

86 metre C/C or shall be concealed as directed including necessary fittings Rmt. 41.00 91.84

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

87 metre C/C or shall be concealed as directed including necessary fittings Rmt. 56.00 148.12

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

88 metre C/C or shall be concealed as directed including necessary fittings Rmt. 61.00 195.67

etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

complete as per the instruction of EIC. (C) 25 mm. Dia

Providing & Fixing gun metal check or no return full way wheel valve etc.

complete as per the instruction of EIC. (E) 40 mm. Dia

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 15mm dia.

92 Providing and fixing brass screw down stop tap.(B) 20mm dia. Each 7.00 223.81

Providing erecting and fixing double coated ISI water tank of required

93 capacity each with all necessary fittings and connection etc. complete on Liter 8000.00 3.95

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the

94 following nominal diameter of self cleansing design with C.I screed down Each 14.00 586.27

or hinged grating including the cost of cutting & making good the walls,

as per detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

95 chamber and water tight C.I. cover with frame of 300mm x 300mm size Each 8.00 1,292.19

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

internal dimensions, total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with

96 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm Each 6.00 2,932.93

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls &

bed concrete for (i) Inside dimensions 455mmx 610mm & 450mm deep

for single pipe line. etc. complete as per detailed, directed & approved by

the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand )

finished with a floating coat of neat cement & making channels in cement

1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate 20mm nominal

97 size ) finished smooth complete including curing & testing… ( I ) inside Each 5.00 19,349.63

900mm x 1200 mm & 1.5 m deep including R.c.c. cover with frame size

560 mm diameter ( A ) with 230mm thick walls of brick masonry using

brick having crushing strength not less then 35 kg/sqcm in CM 1 : 5 (

cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter

sewer.. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for Sewerage

including excavation with any strata up to four meter depth,PCC in Bottom

Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M200 Slab on Top And

98 bottom, required filling for Tank including making Required line for water Each 1.00 1,36,015.69

inlet, precast RCC M.200 Frame & cover etc.as directed by engineer in

charge. etc complete, septic tank as per detailed drawing.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

99 dia x 210mm length x 196mm high at every 2000mm centre to centre or Rmt. 126.00 834.38

shall be concealed in wall as directed necessary fittings such as bends,

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Light

100 duty non-pressure pipes I.S. class NP2 of the following internal diameter Rmt. 40.00 678.02

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300mm

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling

brickbats with dry masonry work, Honeycomb masonary work, M:20 RCC.

101 SLab incl. form work including FE-500 Reinforcemnt, M.S.cover, C.I. Pipe & Each 1.00 35,009.63

cowl vent, vatas in C.M. 1:3 with finishing curing etc. complete as

directed.. etc. complete as per detailed, directed & approved by the

consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter

wash basin with single hole for pillar type with Cl or MS brackets painted

white including cutting holes, ranking bolts for Fixing & marking good the

same, including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap &

15mm dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed

102 down high pressure with screw shank & back nuts & rubber plugs, 15mm Each 5.00 2,839.77

dia brass stop cock (50/75mm p.v.c. Drain connection pipe, Water

Connection Pipe of required Size, & testing the same for leak proof, etc.

with all material & labours to complete this job in all respected manners,

etc. complete as per detailed & approved by the consultant & directed by

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing and fixing wash down water closet (European type,Wall hung

W.C. Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and

103 cover for wash down water closer with C.P. brass hinges, C.P. brass toilet Each 4.00 7,001.62

paper holder, Jet Spray, Metropole flush valve Incl. Connection and rubber

buffers. (A) Vitreous China., etc. complete as per detailed & approved by

the consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot

rest (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete to be

measured and paid for separately) (A) Vitreous China.(I) Long pattern =

White colour

Providing and fixing Urinal or approved quality including conecting the

105 Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back Each 3.00 1,074.86

or corner type size 430mm x 260mm x 350mm.

Providing & Fixing C.P. brass towel rail Approved Make complete with C.P.

Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc.

106 complete as per detailed, directed & approved by the consultant / EIC. (B) Each 5.00 616.42

600mm x 20 mm size, etc. with all material & labours to complete this job

in all respected manners, etc. complete as per detailed & approved by the

consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to

107 wooden plugs with C.P. brass screws & washers, etc. with all material & Each 5.00 859.41

labours to complete this job in all respected manners, etc. complete as

per detailed & approved by the consultant & directed by EIC.

Providing & Fixing handicap toilet set with Wall-mounted European Closet

& wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails, swin type grab bar etc. rubber buffers, C.P nuts,

108 bolts etc making holes in walls & floors, & finishing for ready to use. The Each 1.00 40,425.96

rate includes all necessary connection charges as per product detail to the

satisfaction of Architect / engr. in-charge where required & the final

handing over etc. complete as per specifications, drawings & as directed

by the Engineer-in-charge. The scope includes Providing and fixing all the

necessary fittings of approved brand and as per directed by Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws,

shanks & back nuts. (i) 15mm dia.

110 Providing & Fixing brass screw down stop tap. (A) 15mm dia. Each 6.00 205.83

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

111 painted white including cutting holes in walls and making good the same Each 0.00 2,326.66

but excluding fittings.

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping

Work as Per Directed By Engineer In Charge

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe etc. with

113 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Each 20.00 1,161.50

aggregate 20 mm nominal size), including finishing complete so as to

make it leak proof.

Providing and laying Precast Lightweight concrete hollow core wall with

hollow core concrete unit of approved make & size of 120 mm thick,

mm wide and 2400 mm / 2600 mm / 2850 mm / 3000 mm / 3300 mm in

114 legth made from of controlled cement concrete M20 having cube Smt 215.00 850.42

compressive strength not less than 20 MPa jointing with high strength &

tensile adhesion non-shrink cementitious joint compound / P.U. Foam.

(Plaster not required)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete with

6A Modular type switch / bell push & accessories and earth continuity of

115 following type, erected on PVC / Metallic box, single mounting base frame Pt. 53.00 485.81

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth continuity and

necessary connection with primary light with accessories erected on

116 Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet Pt. 78.00 167.66

for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling complete with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator with separately

117 mounted and accessories with earth continuity of following type erected Pt. 33.00 674.68

on PVC / Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

118 on PVC / Metallic box covered with appropriate front plate modules Pt. 40.00 510.05

erected on / in wall / ceiling as per pipe erected with following type of

accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

119 on PVC / Metallic box covered with appropriate front plate modules Pt. 4.00 745.38

erected on / in wall / ceiling as per pipe erected with following type of

accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on surface

of wall / ceiling complete with Modular type switch & 5 pin Plug erected

120 on PVC / Metallic box covered with appropriate front plate modules Pt. 6.00 915.06

erected on / in wall / ceiling as per pipe erected with following type of

accessories.

[III] For 16A Plug with 2-4 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (FRLS) CAT III

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

121 textured / metallic front plate modules erected on / in wall / ceiling with Pt. 80.00 257.55

following type accessories.

Single mounting base-frame & Textured / Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling ,complete with 6A Modular type

switches and following type of accessories erected on PVC / Metallic box,

122 single mounting base frame covered with textured / metallic front plate Pt. 6.00 603.98

modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

123 front plate , modules erected with necessary connection. As desired by Ea. 20.00 25.25

Engineer In charge

(7) Blank Plate Single Cat-III

124 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 1.00 71.71

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured

125 / metallic/white front plate , modules erected with necessary connections Ea. 11.00 160.59

as per site situation directed by Engineer In charge.

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

126 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 500.00 33.33

following dia of pipes, in approved manner as directed b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary

127 PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 40.00 67.67

following dia of pipes, in approved manner as directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

128 of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) Mtr. 200.00 21.21

(A) Supplying and laying UPVC cable trunking system comprising

129 unplasticised polyvinyl, chloride rigid material with ignition free & flame Mtr. 70.00 277.75

proof confirming BS .All necessary accessories and measuring of following

sizes. (1) 75 mm x 50 mm trunking

(A) Supplying and laying UPVC cable trunking system comprising

130 unplasticised polyvinyl, chloride rigid material with ignition free & flame Mtr. 300.00 188.87

proof confirming BS .All necessary accessories and measuring of following

sizes. (3) 50 mm x 50 mm trunking

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

131 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Mtr. 600.00 62.62

insulated stranded wire of green colour for earth continuity of following

size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

132 insulated stranded wire of green colour for earth continuity of following Mtr. 1200.00 82.82

size (general wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

133 with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of Mtr. 250.00 112.11

green colour for earth continuity of following size (FRLS) (a) with medium

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary

134 clamps or in existing trench / pipe of following size of cables Mtr. 10.00 284.82

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

135 Copper conductor for 1.1 KV. to be laid on wall with necessary clamps Mtr. 100.00 287.85

or in existing trench / pipe at road crossing or floor of following size of

cable. (B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

136 / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary Mtr. 40.00 364.61

clamps or in existing trench / pipe at road crossing or floor of following

size of cables. (B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

/ Solid Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following

size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor of following size of

cables. (A) 4 core 10 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core

139 kv grade ISI marked copper wires of following size to be erected as Mtr. 250.00 46.46

directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber

141 ring for PVC insulated armoured cable complete with out going tails, Ea. 6.00 38.38

insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber

142 ring for PVC insulated armoured cable complete with out going tails, Ea. 4.00 38.38

insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double compression

143 type cable gland with rubber ring for PVC insulated armoured cable Ea. 2.00 75.75

complete with out going tails, insulating tape etc for following size of

cables. (B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for

144 cable of following size evenly crimped with high pressure tool & Ea. 2.00 15.15

connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for

145 cable of following size evenly crimped with high pressure tool & Ea. 6.00 20.20

connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner. (D) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable

146 of following size evenly crimped with high pressure tool & connected to Ea. 160.00 8.08

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for cable

147 of following size evenly crimped with high pressure tool & connected to Ea. 8.00 10.10

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (B) 10 Sq.mm

Making trench in soft soil of suitable width of 90 cms deep for laying

148 cable or locating the fault all over the run and backfilling the same and Mtr. 200.00 55.55

making the surface as normal ground.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

149 accessories of same material at required depth for laying of cable. below Mtr. 160.00 62.62

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

150 accessories of same material at required depth for laying of cable. below Mtr. 180.00 95.95

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (C)90 mm dia

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

151 current rating up to 25 A to 100A. with Fixed thermal & magnetic release Ea. 1.00 6,173.12

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A

152 suitable to operate on 240 V A.C. system and having breaking capacity 10 Ea. 93.00 112.11

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark - Cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

153 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing Ea. 4.00 668.62

box having following capacity (b)40 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

154 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing Ea. 2.00 587.82

box having following capacity (a) 6 to 32 Amp.

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

155 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing Ea. 7.00 647.41

box having following capacity (b)40 Amp.

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

156 appropriate nos. of MCBs.(The DBs should be used of same company of Ea. 2.00 1,152.41

MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

157 appropriate nos. of MCBs.(The DBs should be used of same company of Ea. 4.00 2,913.85

MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel

double door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) - flush / surface mounted double door (IP54)

fitted with insulated copper busbar, isolated neutral link, earth bar and

158 DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for Ea. 1.00 18,663.60

63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as

per following .(The DBs should be used of same company of MCB to be

(D)12 way outgoing

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

159 KA and suitable for operation on single phase 240 V,50Hz. having Ea. 10.00 1,969.50

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

as directed (i) 25 Amps.DP Cat. III

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted

160 inside and outside with hinged doors and locking arrangement consisting Ea. 1.00 12,399.77

of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog

time switch, auto manual switch of same make and suitable input and

output Bakelite terminals and with door earthing approved by Engineer in

charge.(A) 32 Amp

providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

161 KA and suitable for operation on single phase 240 V,50Hz. having Ea. 6.00 2,235.13

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

as directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

162 CCT 3000 K to 6500K, Nos. 10.00 295.93

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

163 Luminaire efficacy> 85 lumens/watt , Nos. 11.00 220.18

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

Circular shaped Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20 (i) 9 watts,Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

164 Luminaire efficacy> 85 lumens/watt , Nos. 29.00 427.23

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

Circular shaped Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20 (ii) 11 watts, Surge-2 KV Cat-

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

165 Luminaire efficacy> 85 lumens/watt , Nos. 87.00 758.51

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

Circular shaped Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20 (iv) 24 watts, Surge-2 KV Cat-

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 160 to 270 V,Power

166 Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity Nos. 10.00 2,201.80

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (iii) 36 watts

Providing and erecting PVC body surface or pendent mounting LED Bulk

type 9 watt Lighting Fitting with electronic driver. And lumen output from

167 luminaire 720lm , input voltage range 90-300VAC , 50Hz cool white(3000 Nos. 5.00 787.80

to 6500k), inbuilt driver, -20degC to +60degC working temperature, AL

frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

168 mtr. Long duly painted with two coats of aluminium paint complete with Nos. 10.00 3,225.94

metallic base plate of 300 mm x 300 mm x 4mm thick for using as a

compound light pole with approx. weight 32 Kg.

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm.

/ require size pole top having sufficient fasteners for fixing the brackets

169 and having spread of 1 mtr. length with suitable rise as per site condition Nos. 10.00 561.56

& suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms. [A] Single Arm

bracket 1 Mtr

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

170 cover having locking with square head stud loop in / loop out in built Nos. 10.00 616.10

terminal suitable for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size. (B) 250mm x 194mm x

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 45 x 45 x 100 cm. Deep in below

171 ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high Nos. 10.00 809.01

upper ground level with necessary curing and finishing in approved

manner. ( for 4 & 6 mtr pole)

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

172 canopy & 30 cm. down rod erected with earthing.(Make shall be approved Nos. 33.00 2,056.36

by Engineer in charge) including Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe down rod erected duly painted for

fan complete with proper insulation without leakage and earthing.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

173 the RCC bars up to 50mm length each side and pierced through a 16 Nos. 33.00 108.07

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Supplying & erecting approved make low noise decorative exhaust fan

175 having square frame ABS body with inbuilt lowers & square frame. 250mm Nos. 9.00 1,366.53

with 1350 RPM Cat.II

Providing and erecting required size HOT dipped Galvanised iron strip for

176 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. Kg. 100.00 77.77

using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB

177 / ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 50.00 794.87

Providing and erecting HOT deep Galvanised iron strip wire 8 to

SWG.Using for DB earthing wire 8 to 16 SWG.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

179 agency and officer Incharge has to ensure the value of earthing resistane Ea. 2.00 7,095.25

mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. [B] For Electrical installation up to 11 KV located

in other than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of earthing resistane

180 mentioned in test Certificate) & having back filling compound of (B) Inner Ea. 2.00 10,593.89

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. [C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA)i.e. independent Earthing

located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction. [C] CAT -

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and erecting approved make online Un-interruptible Power

Supply system comprising flat cum-boost charger with IGBT base rectifier

& Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output

182 230V,50 Hz Ac with 0.8 load power factor with battery, over/under Nos. 1.00 82,941.20

voltage output with over load & short circuit protection equipment. The

system housed in CRC sheet duly powder coated paint with following

power backup.with MS painted batteries stand, 10% Overload capacity for

momentary load. (C) 3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚ C within a hour, The water cooler

183 should be comprising of hermetically sealed compressor, fan motor, Ea. 1.00 49,559.69

condensing unit, water tank surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

184 capacity 80 psi, mention with 40 psi inline type post carbon filter auto low Ea. 1.00 29,187.99

& high pressure switches with following size of storage tank & LPH

capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster

Providing Water proof straight Joint in PVC insulated flat flexible copper

185 cable by using insulating material, water proofing material, & making the Ea. 10.00 189.88

joint complete. (A) Up to 10Sq. mm

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS

MAKE AS PER SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor (0.8758

centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-

186 25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Triple Nos 13.00 4,156.15

stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital

watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 30 Mtr.,

IP67, PoE complete with rj45 connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ

CPPLUS MAKE AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image Sensor

(0.9407 Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 ×

187 1440)@1-25/30 Instastream, H.265, H.264, H.264H, H.264B, MJPEG Nos 6.00 8,080.00

Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC,

BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built-in Mic IR

Range of 50 Mtr., IP67, PoE complete with rj45 connector crimping, PVC

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS

MAKE - 32 Ch. 4K Network Video Recorder AS PER SPECIFICATIONS : Up to

32 channel IP camera input Max. decoding capability: 8 × 1080p@30 fps,

2 × 8 MP@30 fps Smart Instastream/H.265/H.264 /MJPEG Max.

188 160/128/60 Mbps incoming/recording/outgoing bandwidth Support 2 Nos 1.00 18,180.00

SATA HDDs up to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI

/ VGA simultaneous video output Support Multi-brand network cameras

ONVIF Version 2.4 conformance Mobile Software: iCMOB, gCMOB CMS

Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance Harddisk

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER

SPECIFICATIONS : 16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP

PoE power budget is up to 250 W, making it ideal for small to medium

business surveillance systems. Port Priority is able to guarantee the

190 quality of sensitive application like video monitor. PoE Auto Recovery Nos 3.00 15,150.00

automatically reboots your dropped or unresponsive PoE-powered

Intelligent power management protects the switch from overload. QoS

ensures smooth traffic for latency sensitive applications. IGMP Snooping

optimizes multimedia traffic delivery, such as IPTV.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5

191 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - Nos 2.00 3,030.00

TP-Link Archer C50 AC1200 or equivalent

192 SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9 Nos 1.00 23,482.50

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets,

193 mounting trays, exhaust fan complete with accessoreis - 600 X 600MM Nos 1.00 9,595.00

approx. size -- Elirix make

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input

Power:8 Watt RMS Power Taps:8/4/2W on 100 V Freq.Responce:60-

194 15,000Hz, SPL (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model Nos 20.00 2,222.00

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having following

specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux.,

195 frequency Response :50-1500HZ I3db, Tone, Controls :Cut & Boost type, Nos 1.00 22,725.00

LED Meter : 5 LED Arrays, The amplifier suitable to operate 240V A.C.&

24volt D.C. (Battery) with automatic changeover from AC to Battery

operation, duly protected by wrong Battery Polarity connections.

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having

following features & facilities. (a)input Channels :- Each channel has

6.25mm size balanced phone jack for mike & line for balanced &

unbalanced signals (b)Individual gain control for sating optimum level for

minimum noise (c)BASS, MID & TREBLE ‘ controls Separately for each input

channel (d)ECHO control for each channel (e)PAN control for echo channel

for left or right output (f) AUX Control : To control , level of the channel in

final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO Section

:- ECHO, reverb & Chorus effect can be added to all input channel by

different setting of Delay, Reverb & Level control (i)Tape section (j)Aux.

send & return For sending Pre-feeder output of channel for monitoring or

196 adding a special effect unit (k)Mono / Stereo output controls (m) Head Nos 2.00 38,632.50

phone output for monitoring purpose.

Technical specification:

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency

Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization

Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs,

Line Output Line Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM

/ +17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0

dB, 0.775V) The Console shall be mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with ECHO

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust

resistant sound column with Aluminium case & Aluminium mesh grille

impedance having frequency response 150-20000 Hz with following

197 specifications (b) With 2 speakers having power handling capacity of Nos 2.00 5,050.00

23W(MAX) & 15 W (RMS), each speaker have impedance of respectively

670 ohms/ 15W, 1 K.ohms/

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust

resistant ceiling/ wall mounted sound speaker with decorative case &

taps / impedance having frequency response 150-20000 Hz with

198 following specifications (b) With 2 speakers having power handling Nos 4.00 7,575.00

capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of

respectively 670 ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605,

GMB-6C or equivalent in Bosch /Shure etc.

200 SPEAKER WIRE Mtr 500.00 85.85

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

201 blower motor with its accessories by means of extra supplied proper Each 2.00 56,353.96

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to

3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Liaisoning work for additional load for requirement, electrical power

202 connection charges and inspector approval for power(to be paid to Lot 1.00 50,500.00

concern electrical power supplier company)

Conventional type Smoke detector having following specifications : Dual

LED’s for 360 visibility. Advanced detection and communication protocol.

Easy installation and maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.

Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to

203 37.8 C. Relative Humidity : 10% to 90% Nos 18.00 1,146.35

Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up

Time : 30 Seconds.

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote

Output : 15mA maximum open collector. Smoke Sensitivity : 0.10 to

dB/m. Thermal Rating : 57 C(135 F). complete with Junction box RAVEL

make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications : CE

Approved. 16 X 2 Dot Matrix LCD Display. Standby battery backup with

built in charging. Switch Mode Power Supply. Tactile eypad for easy panel

operation. System ON indication. Low Battery visual warning with audible

ton. Fire / Fault status in unambiguous colored LED indication.

programmable relays for fire,supervisory and fault. All zones accept

smoke detectors and any normally open contact device. Any Zone can be

204 configured as alarm or supervisory. Zone wise isolation and one man walk Nos 1.00 9,595.00

test facility. Programmable Aux Outputs. Lamp test & Drill test facility.

100 All Events log with RTC. Date / Time / Password configuration.

Programmable auto silence facility. Zone wise sounder / contact

optional). TCP-IP / GSM facility (optional). 120 / 230VAC + 10% -15%,

/ 50 Hz, 50W Operating Temperature 0 – 49° C / 32 – 120° F. Storage

Temperature 0 – 60° C Relative Humidity 93 ± 2% RH (non-condensing) at

32 ± 2° C / 90 ± 3° F Charging voltage Charging current 28 V ± 5%

350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating

Voltage : 24V DC Operating Current : 40mA Sound Level : 85dB@1m

Operating Temperature : 0 – 49° C / 32-120° F. Sounder Type : Piezo

205 Electric Type Tone Type : Fire Engine Siren Material : ABS Plastic Colour : Nos 3.00 949.40

Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box : 95 H mm X

75 L mm X 58 D mm Mounting Type : Surface / Flush Mount complete

with Back Box - RAVEL make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating

206 Voltage : 24VDC Operating Current : 30mA Colour : Green / Yellow / Red Nos 3.00 808.00

Material : Plastic IP Rating : IP-50 Size : 86 X 86 X 50 mm - RAVEL make

Cat no. RE716 MR

Supplying, Installation, Testing and commissioning of Jockey Pump

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction. with

207 M.S.fabricated common base plate, coupling, coupling guard, foundation No. 1.00 1,19,041.95

bolts etc. for motor and details pump specificaion follow as per

specification as mentioned in tender volume..

Supplying, installation, testing and commissioning of electric driven

Monoblock Fire pump 960LPM at 70 m head 2900 RPM pump. suitable for

automatic operation and consisting of following: complete in all respect

208 as required. With Suitable HP, SQ cage induction motor TEFC type suitable Set 1.00 2,52,399.00

for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for

enclosure, horizontal foot mounted type with class 'F' insulation,

conforming to IS:

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set

complete with 100 ltr diesel

Control Panel for the operation of Jockey pump, Fire pump Electric and

Fire pump Diesel with automation

Providing, fixing, testing & commissioning of Pressure Switches for

automation of fire pumps. Pressure switches shall be double pole single

211 throw type suitable for 3 phase supply with diaphragm. Aluminum Nos. 3.00 2,400.47

Enclosure with IP 66 protection follow as per specification as mentioned in

tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges,

Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned

212 in tender volume.. Nos. 2.00 10,090.94

of size: 150mm dia.

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve

conforming to I.S:13095 class PN 16 rating with Fittings, Flanges,

213 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Nos. 2.00 6,107.98

in tender volume..

of size: 100mm dia.

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot

valve conforming to I.S:13095 class PN 16rating with Fittings, Flanges,

214 Nutbolts, Washers, Gaskets etc. follow as per specification as mentioned Nos. 2.00 18,533.30

in tender volume..

of size: 150mm dia.

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-

215 Return Valve class PN 16 rating with fittings, flanges, nutbolts, washers, Nos. 2.00 11,041.19

gaskets etc.of sizes: 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding

216 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 35.00 2,391.95

clamps, hangers etc. with painting of one coat of primer and 2 or more

coats of synthetic enamel paint of approved make / shade complete as

per specification. 150mm dia

Providing, fixing, testing and commissioning of Above Ground MS. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

3589 (upto 200 mm dia. And above) including cutting, screwing, welding

217 etc. and providing all fittings like flanges, bends, tees, elbows, reducers, Meter 15.00 1,744.20

clamps, hangers etc. with painting of one coat of primer and 2 or more

coats of synthetic enamel paint of approved make / shade complete as

per specification. 100mm dia.

Providing, fixing, testing and commissioning of Under Ground M.S. ERW

Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS:

218 3589 (upto 200 mm dia. And above) with IWL/pypecoat, 4mm thickness Meter 10.00 3,265.73

wrapping and coating and providing all fittings like flanges, tees, elbow,

fasteners with all follow as per specification as mentioned in tender

volume.. 150mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

219 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 80.00 363.56

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 25 mm dia.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

220 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 40.00 459.50

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

221 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 25.00 575.64

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

222 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 797.82

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 50 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

223 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 15.00 949.31

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with

all fittings (butt welded) such as elbow, socket, tees, unions, flanges with

224 hot deep galvanized nut & bolt , reducer, clamps & plug etc.with Mtr 30.00 1,201.78

welding,threading,jointing. And Excluding cutting holes in wall

/slab and making good of the same. The pipe & fittings shall have One

coat of primer and two coats of fire red / PO red 80 mm dia.

Providing fixing testing and commissioning of GUN METAL 15 mm size

225 quartzoid bulb type sprinklers, set to operate at 57 degree Centigrade. Nos. 85.00 399.96

Pendent type type with required accessories complete. (GUN METAL)

Supplying , installation, Testing & commsioning of Flexible Drop

Providing, fixing, testing and commissioning of RRL Fire delivery hose

mm Dia in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with

227 Stainless Steel male & female coupling ISI Mark IS :903 duly binned with Nos. 4.00 6,502.28

copper wire winding follow as per specification as mentioned in tender

Supply installation ,Testing & commissioning of single headed oblique

pattern ISI hydrant landing valve with 80 mm dia flanged inlet & 63 mm

228 dia instantaneous type female outlet complete with PVC cap and chain, Nos. 2.00 7,650.75

twist release type lugs WITH all accessories as per SI Standard

Conforming to IS-5290. (SS 304- Body SS-304 Coupling)

Providing, fixing, testing and commissioning of weatherproof standard

fire Hose Cabinet wall mounting type 18 Gauge. (750 x 600 x 250) having

229 Double Opening with M.S. fabricated stand, necessary lock & key Nos. 2.00 6,189.79

arrangement follow as per specification as mentioned in tender volume..

Supply installation ,Testing & commissioning of SS Fire Brigade

230 connection consisting of 2WAY. 63 mm instantaneous type male coupling No. 1.00 7,650.75

with 125 mm Dia. flanged outlet complete for fire water tank.

Supply installation ,Testing & commissioning of SS Fire Brigade

connection consisting of 4WAY. 63 mm instantaneous type male coupling

with 125 mm Dia. flanged outlet complete for fire water tank.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing, fixing, testing and commissioning of Wall mounting Fix type

First aid Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Type

II fitted wit SS Shutt off Nozzle follow as per specification as mentioned in

tender volume..

Supply installation , testing & commissioning of ISI Standard SS-304

branch pipe with nozzle of 20mm nominal bore outlet as per IS:903

suitable to fit with standard instanteneous type 63mm dia coupling (SS-

Supply installation testing & Commissioning of 25 MM dia Air Realese

valve complete in all respects. (GUN METAL)

Supply installation testing & Commissioning of Pressure guage 4" dial 0 to

16 kg/cm2 with syphon and cock complete in all respects (SS-304).

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS-

304) complete with SS Ball with single handed lever complete in all

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher

Kgs. capacity bearing ISI Mark for Fighting ABC Class of Fire. The

Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 bearing

ISI. Mark follow as per specification as mentioned in tender volume..

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made

from the brand new seamless cylinder, as per IS: 7285 and CCE approval,

fitted with a Discharge hose and horn and wheel type valve with initial

Charge as per IS: 15683:2006 specification, bearing ISI Mark follow as per

specification as mentioned in tender volume..

Providing & fixing Modular type ABC Dry Powder Fire extinguishers 5 litre

239 capacity Fire Extinguishers. The Extinguisher will be Manufactured Strictly Nos. 5.00 4,447.03

as per BIS: 15683:2006 bearing ISI. Mark follow as per specification as

mentioned in tender volume..

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing, fixing, testing and commissioning of On -Off Switch follow as

per specification as mentioned in tender volume..

Providing, fixing, testing and commissioning of below Auto Glow Signages

241 follow as per specification as mentioned in tender volume.. Emergency Nos. 2.00 233.17

Exit 4” X 12”

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority with all

other charges and documentations for getting No Objection Certificate.(as

per GMB Approved rate)

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum framing of

gauge 16. Aluminum framing size for vertical & horizontal support is

mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm. All

exposed surfaces finished with 1 mm thick Laminate of approved shade

complete with mat finish. Necessary framing to be erected above false

ceiling. No extra cost to be paid for the same. Before installation, make

hole/face plate for conduit pipes of electrical / networking cables with

243 open able stud from partition Including all materials and labor etc. Make Sqm 4.00 6,620.55

necessary grooves as per shown in drawing. Using of 12 mm thick clear

glass with proper crystal edges & with suggested frosted films on glass.

All joints are covered with teakwood beading Patti finished with polish

matching with laminate. Including door of same design if required

Complete with all necessary hardware & adhesives as per details given in

drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.) for

Electrical works & no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120

244 grams per sqm at joints to get required length and size of 24X38mm Sqm 66.00 1,674.15

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and centre to centre to form agrid of 1200X600mm and secondary thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to

form grid of size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm made of

0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light weight calcium silicate ceiling

tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top, with

with specified powder coating and Back and side Ply of table is also made

up of 19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

beading Patti. Common or front Part of Table is Sectationized with MS

245 Perforated Sheet. All exposed and internal surfaces covered with Laminate Sqm 42.00 24,870.53

Finish of approved shade & Complete as per detail drawings & as

instructed by Architect/consultant/ Engineer In charge. Complete with all

necessary hardware like nails, ss screws, table chain, Key board trey, TDS

channel, adhesives etc. Contractor has to provide all necessary cut outs

for Electrical works & no extra payment shall be made for it.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Providing & fixing office table / staff table having ht of 750 mm Top,

with 19mm thk plywood or MS pipe Structure as per Architect/ Engineer

19mm Thick. Top of Table is 19mm thk ply with laminate Finish Per

Requirement and All internal & external Joints finished with teakwood

beading Patti. Item includes fixing of drawers and keyboard tray and

246 storage with shutters under table as per drawing. With grooves shown as Sqm 8.00 29,350.96

per drawing. All exposed and internal surfaces covered with Laminate

Finish of approved shade & Complete as per detail drawings & as

instructed by Architect/consultant/ Engineer In charge. Complete with all

necessary hardware like nails, ss screws, table chain, TDS channel,

adhesives etc. Contractor has to provide all necessary cut outs for

Electrical works & no extra payment shall be made for it. All ply should

follow IS

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600

mm, having skirting of 75 mm, including vertical supports & horizontal

shelves shown as per drawing made by 19 mm thick Marin ply, Open Front

Side for Selves with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading and Teakwood molding as per design. Back

247 ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Sqm 60.00 10,381.62

Laminate & internal surfaces are covered with 1 mm thick laminate.

External & internal joints covered with beading Patti complete with polish

finish. With grooves shown as per drawing. All complete with proper

hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS 304 etc.

All Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.

includinf of vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or

Clear Glass with using 12 mm thick Marin ply for framing. All complete

with proper teakwood beading. and Teakwood molding as per design.

248 Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Sqm 41.00 13,815.77

Laminate & internal surfaces are covered with 1 mm thick laminate.

External & internal joints covered with beading Patti complete with Polish

finish. With grooves shown as per drawing All complete with proper

hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable

manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as

per shown in detail drawings & as per instructions of architect/consultant

/ in charge engineer

Notice Board / Pin Board

249 Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Nos 4.00 7,259.38

Arrangement complete as per drawing and Directed by Engineer In Charge

etc complete.

Providing and fixing News paper stand size 650 x 820 x 1200 or required

height made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk inner

laminate for top including back panel with shelves for magazine and news

250 paper as shown in drawing, all expose joints finish with teakwood Nos 2.00 13,044.62

beadsing patti with polish finish and provision of openable top for news

paper storage complete as per detailed drawings and Engineer-In Charge

and Architect

Supplying and providing reading chairs with PP arms with soft PU pads,

Seat and back upholstered with cushioned and MS powder coated frame

251 and cantilever legs. Overall dimension 590 L x 600 W x 915 H (Or as Nos 91.00 6,060.00

specified) complete as directed by architect and product as per given

specification. Complete as per architectural design and concept and

approved by Architect & Client.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Supplying and providing High Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

252 -Knee tilt mechanism Nos 1.00 10,738.07

-360 swivel motion/ 100mm stroke gas

-Nylon Star base

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per specification

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

253 -100mm class 4 gas lift Nos 8.00 5,024.65

-PP Fixed Arm rest

-Nylon Star base/Twin wheel nylons casters

-Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with paddle.

Capacity-10 to 15 Ltr.

Supplying and providing dust bin made of 100% virgin plastic with paddle.

Capacity-120 L

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch

with speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and warranty

etc as per manufacturer’s specifications. Fabric to be as per approved

sample. All the work complete as per the detailed drawing and instruction

of Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC with

Aluminum Backing. Weight:290 g/sqm, Thickness:0.32 mm, Openness

256 Factor:3%, Visible Light Transmission (N-N): 2%-4%, Solar reflection Sqm 115.00 1,962.94

(white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Strength

(Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN,

Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire

Retardancy:B-s2,d0/EN 13501-1. All complete as per approval of designer

& instruction of Project Manager. (The mode of Measurement: The size of

the blind will be measured from end to end bracket (Left to Right bracket)

& height will be measured from top of the pelmet till the bottom of the

bottom bar

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with

257 proportionately base dimenstion as per approved design by client and Nos 1.00 1,50,995.00

complete as per instruction of engineer-in charge and consultant.

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden

258 frame of size 2in x 1in consisting 6mm thick ply in back with digital vinyl Nos 30.00 2,497.23

printing and 5mm thick glass on top if required.

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x

259 2160 pixels with HDR TypeHDR 10+ complete as per approved make and Nos 0.00 1,02,067.57

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb RAM

260 DDR4, 256 GB SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 STUDENT, Nos 7.00 59,748.35

Full HD display of 21 to 23.8' with keyboard and mouse.

Providing and fixing Automatic Duplex laser printer with 30 pages per

261 minute print speed, 8 mb memory, Large 250 sheet paper tray with USB Nos 1.00 15,157.58

connectivity.

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan

262 / Duplex DADF /Single Nos 1.00 58,075.00

Providing and fixing Directional and Informative Signages- SS Plate, Grade

263 304, Brush finish, 2mm Thickness with smoothen corner edges, Acid Sqm 1.50 92,433.18

etching with duco color, SS studs 1.5' away from wall.fitting as per

dirction of Architect and EIC

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick

264 letter 1.5" depth 10" Height with Duco color & fitting as per direction of Nos 1.00 52,520.00

Architect & EIC.

Sr. Qty. May More Tender Rate

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. Or Less Rate In FIghure

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal