Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.1 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹4.6 L+₹48,736.42 (11.8%)Rejected-AOC | 2 | Rejected-AOC L2 | |
| 3 | 3₹4.8 L+₹62,214.46 (15.0%)Rejected-AOC | 3 | Rejected-AOC L3 | |
| 4 | 4₹5.1 L+₹1.0 L (24.3%)Rejected-AOC | 4 | Rejected-AOC L4 | |
| 5 | 5₹5.9 L+₹1.8 L (43.1%)Rejected-AOC | 5 | Rejected-AOC L5 |
Tender Value
₹6.0 L
EMD Value
₹14,960
Closing Date
12 Jun 2023, 3:00 pmClosed
Rajesh E
Asst. Exe. Engineer P.H. sub division, Alathur
Jilla panchayath deposit work-Part-II - Construction of cabin P/H, Linking borewell with pumping main and Supply of pump set
2023_KWA_579901_1
WRD/KWA-CE(NR)/TR/13924/2023
Open Tender
Civil Works - Water Works
Item Wise
30 days
Kannambra
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,320
₹14,960
3 Jul 2023
5 Jun 2023
13 Jun 2023
5 Jun 2023
12 Jun 2023
5 Jun 2023
5 Jun 2023 - 9 Jun 2023
Amount
CONSTRUCTION OF RCC PUMP HOUSE
OD54818/2023-2024:Supply and instalation of reinforced cement concrete prefabricated cabin pump house of size 2m x 2m ,Inside with RCC roof gabled or flat having one door 2 nos Ventilators using RCC grill including the supply and erection of RCC post 2 nos of size 10 x 10 x 200 m,for fixing the panel board including the cost and materials transportation etc.Flooring with CC 1:4:6 and over plastering with CM 1:4 12 mm thick and troweled smooth etc.complete and also plastering with 1:4 CM all the RCC post inside and outside face of pump house providing are armed moulded plastic chair fining wall with proof cement paint two coat and superscribing the name of scheme on the all using approved quality enamel paint.
LINKING BORE WELL WITH PUMPING MAIN AND DISTRIBUTION SYSTEM
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.9.6:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes.
OD54819/2023-2024:Supply and fitting of 50mm G M Valve with Hand Wheel as per the direction of departmental officers.
OD54820/2023-2024:Linking of existing line to new line, including all labour charges and charges for hire and conveyance of tools and plant, cost of consumable charges for lighting ,watching,ribbon fencing,caution boards,traffic diversion,as per the direction of departmental officers etc.
COST OF PIPES AND SPECIALS
100.98.234:Supply of PVC Pipe, 10kg/cm2, 63mm Dia.
100.98.211:Supply of PVC Pipe, 6kg/cm2, 63mm Dia.
OD54817/2023-2024:Cost of PVC specials @ 3%of cost of PVC pipe
SUPPLY AND FITTING SUBMERSSIBLE MOTOR PUMP SET
OD54821/2023-2024:1) Supply, erection, testing and commissioning of KWA prequalified reputed make tube well submersible pump set with SS impeller, SS shaft and CI pump casing suitable for bore well with 180 mm dia inner casing pipe. The duty condition is as follows ( Discharge- 2.22 lps , Total head - 140mtrs. 2) Motor - Supply, erection, testing and commissioning of KWA prequalified reputed make vertical solid shaft foot mounted TEFC 3phase induction motor suitable for the above pump set working 3 phase, 50 Hz , 415 V working in AC supply. 3) Starter - Supply erection, testing and commissioning of suitable rating (Fully automatic ) starter for the above motor with over voltage and under voltage protection , single phase preventer, over load relay with motor protection relay complete 4) Panel board (suitable for operating two pump sets bunt one pump set at a time ). 5) Valves- Supply of suitable size best quality heavy duty ISI marked double flanged sluice and Non return valves with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valve. 6) Suction and delivery pipe connections - Supply and fitting of suitable size best quality G I pipe (Medium) for total length of 10 meter suitable for the above pump set connecting the delivery side of the pump with valves and suitable specials to connect with the pumping main. 7) Supply and installation of suitable pressure gauge. 8) Maintenance for a period of two years
OD54822/2023-2024:Supplying and erecting 50mm GI pipe (Medium) for bore well (DLPC Rate)
OD54823/2023-2024:Providing and fixing of GI threaded coupling , 50mm
OD54824/2023-2024:Supplying and fixing 4 sq mm three core flat submersible cable
OD54825/2023-2024:5% extra for 1 year additional warranty
FRANKLIN JOSE
SIVADASAN.M
D VINAYAKA MOORTHY
RAMACHANDRAN K V
Bidder Name
D VINAYAKA MOORTHY
P Udayakumar
FRANKLIN JOSE
SIVADASAN.M
RAMACHANDRAN K V
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_856425.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .