Loading…
Loading…
Tender Value
₹5.1 L
EMD Value
₹12,637
Closing Date
25 Oct 2023, 3:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER
PH SUBDIVISION, KOLLAM
Deposit work - RWSS to Perinadu- Construction of pump house and Erection of pump set at SC Crematorium near Govt ITI, Chanthanathope, Ward no. 14 in Perinadu Grama Panchayath
2023_KWA_613460_1
TR/2749/2022_5_1_1/1
Open Tender
Civil Works - Water Works
Item Wise
60 days
SC Crematorium near Govt ITI, Chanthanathope
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,115
₹12,637
1 Dec 2023
16 Oct 2023
26 Oct 2023
16 Oct 2023
25 Oct 2023
16 Oct 2023
Amount
Construction of pumphouse at SC crematorium Chandanathope, bleaching powder room and Chlorine tank facility
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.1.2:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating less than 275 gm/m2
OD163325/2022-2023:Wiring the pump house and Providing 4 nos light point, and 1 No Fan point and one socket etc wiring the pump house using best quality copper wire with pvc pipe and fitting switches, sockets etc in two switch board and supply and fitting 2 nos. 20 w CFL bulbs, 2 nos. tube set, 1 no. sealing fan best quality as per IE rules.
OD160527/2022-2023:Providing chlorination arrangements to the tube well pump house by supplying and fixing 2 nos of PVC tanks with capacity 500 Ltr & 300Ltr with the platform out side suitable to bleaching powder solution connecting to the 80 mm GI pumping main near the well including cost of all materials , labour charges etc complete as per the instruction of officer in charge
APP- B -Supply and Erection of pump set
OD159053/2022-2023:Supply, erection, testing and commissioning of Brand new Submersible pump set having ISI mark with suitable motor having sufficient discharge in accordance with the yield of the tubem well and against a total head as instructed by the deptl officers, with bronze impellers, SS316 shaft etc working in 3 ph AC main as per IS specification with minimum efficiency of 70% . The rate quoted inclusive of 5m , 80 mm GI B class pipe and specials, 5m 4 sq.mm cable , fully automatic star delta starter of approved manufacturers , interconnection of outlet with existing distribution line using suitable specials, earthing by using suitable copper wire/plate, supply and fixing standard type floor mounted panel board, supplying copper cable of required length and size, providing cable connection from panel board to starter and starter to motor etc, supply and fixing suitable type CI D/Sluice valve , reflux valve, pressure gauges, power capacitor, single phase and dry & running preventors, earthing main switch board with all units as per IE Rules, hire for tools, supplying ,fabricating and fitting meter box as per KSE I rules for fixing the meter and fuse unit of KSEB etc complete as per the direction of departmental officers.
OD160656/2022-2023: Charges for supplying best quality 3 core 4 sq mm flat copper cable for erection work
OD159117/2022-2023:Supply of Supply of 80 mm uPVC column pipe including coupling
100.98.428:Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.6, Size 80mm.
OD161106/2022-2023:Fabrcating and supplying 80 mm GI Pumping main from top of the tube well to 110 mm PVC distribution line including providing Tee joint,3 Nos of 80 mm G I bent ,5 Nos MS flange for fitting control valves and foundation to the top of the well mouth using 80 mm GI pipe suitable to proper horizontal alignment, welding together<br>to water tight joint including earth work excavation cost of all materials , labour charges ,hire charges of welding machine, cutting / grinding machine etc
100.98.505:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.
Pumping Main and allied work
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.
100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.
100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.
100.98.224:Supply of PVC Pipe, 8kg/cm2, 110mm Dia.
OD162358/2022-2023:Interconnecting the existing PVC/AC pipe line to the newly laid pipe line after tracing out the existing pipe line,cutting and jointing with suitable specials so as to make a water tight joint,charging and testing,providing fencing,lighting watching and providing caution board ,.including all labour charges,cost of pipe and specials etc.complete as per the direction of deptl.officers
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.
100.98.505:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.
Automation arrangement and KSEB power allocation charge
OD160444/2022-2023:Supply of MU-G20 fully automatic star delta starter for automation .
OD160445/2022-2023:Supply of M POWER module for mobile starter for motor.
OD160447/2022-2023:Installation charge for sub pump controller kit.
OD166896/2022-2023:Supply of SIM , SIM kit and including plan for one year
S.Shaji
Bidder Name
S.Shaji
LIJEESH V
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_917745.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .