Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹37.5 L+₹5.1 L (15.6%)Rejected-Finance | L2 | Rejected-Finance Not Lowest |
Tender Value
₹38.1 L
EMD Value
₹76,140
Closing Date
19 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer P Navy Kalinga Visakhapatnam
Garrison Engineer P Navy Kalinga Military Engineer Services INS Kalinga PO Visakhapatnam 531 163
AS, AS TO PVC DOORS, WOODEN DOORS, JOINERIES IN PHASE II MAPS BLDGS. AND JUNIOR SAILORS INLIVING BLOCK UNDER LBW AT NAVAL STN BHEEMUNIPATNAM, PROVN OF UG CABLING, GARDEN LIGHTS NEAR GUARD HOUSE AT INS KARNA UNDER GE (P) NAVY KALINGA
2022_MES_519039_1
GE (P)/N/K/8889 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer P Navy Kalinga Visakhapatnam
Class D, Category a (i) , b(i)
6 documents required · 6 mandatory
₹500
Garrison Engineer P Navy Kalinga Visakhapatnam
₹76,140
Yes
11 Jul 2022
20 Apr 2022
21 May 2022
20 Apr 2022
19 May 2022
5 May 2022
60 days
Amount
Taking down PVC chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.
Taking down shutters of any description exc. 1.00 Sqm but n. exc. 2.00 Sqm each and removing from the site, complete all as specified and as directed.
Taking down chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.
Taking down cement plaster of any description on brick work/stone work incl raking out joints, hacking for key ,scrubbing down with water etc and removing rubbish from site of work complete all as directed.
S&F solid PVC door frame of size 50mmx95mm made out of 5mm wood grain printed PVC sheet (Used instead of plain colour PVC sheet) and edges painted to match with the printed sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded wood grain printed PVC sheet (used instead of Plain colour PVC sheet) with 5mm thickx15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm (90O) used instead of exposed portion of PVC sheet beading, panelling of wood grain printed PVC sheet to fit in the mild frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass any thickness size quality or description from /wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads .
S&F 5mm thick plain sheet glass and square each 0.5 Sqm & fixed in PVC/UPVC frame work complete all as specified.
S&F 4 mm thick pin headed glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.
M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
S & F 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density ,wood particle board with commercial face veneers supplied and fixed to chowkats complete all as specified and directed.
M & L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed
M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq.m but n exc 0.5 sq.m each ditto
M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc, area n exc 0.1 Sq.m each, ditto
S&F 125mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.
M&L 200 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.
M&L 150 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.
S & F 150mm size aluminium handles, cast type, anodised complete all as directed.
S&F 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.
M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel Paint over a coat of pink primer complete all as specified and directed.
M & L Brick Work in with fly ash Bricks straight or curved on plan to any radius in half brick thick wall, built in Cement Mortar 1:4 complete all as specified and as directed.
M & L rendering 10mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over 2 mm thick of wall care putty complete all as specified and as directed.
M&L 18 mm thick prelaminated MDF board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboards etc complete all as specified and as directed.
M&L Anodised aluminium frame work for ACP sheet cladding including joining cleates for fixing etc
Design, supply and fix at site of the tray panel screw type system with aluminium composite panel of approved color on exterior walls, ACP soffits, copings, slab projections at all heights and elevation . The aluminium composite panel shall be 4mm thick consisting of 3mm thick thermoplastic core of antioxidant LDPE andwiched between 2 skins of 0.5mm thick aluminum alloy sheet making a total panel thickness of 4mm . The external surface shall be finished with PVDF paint , all as specified and as directed by Engr-in-charge. ( Make: ALUCOBOND/ ALSTRONG/ EUROBOND or approved equivalent make)
S & F for 18 mm thick Bison Panel Board frame work as in cupboards etc
S&F Continuous (Piano) hinges mild steel, bright finish or electrogalvanised with width of flaps 30mm when opened complete all as directed.
S & F for Magneto Plastic Magnetic Door Stopper Cacher with Screw Fitting with Sleek Design and all as specified and as directed by Enginer in Charge
S & F for Plastic Premium Magnet , Almirah and Cupboard Door. With Screw Fitting with Sleek Design and all as specified and as directed by Enginer in Charge
S & F in 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete
S&F stainless steel pipe, curtain rod, 25 mm dia, complete all specified and as directed.
S & F Fancy type chromium plated knobs for fixing curtain rod complete all as specified and as directed.
M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 0.5litres per linear metre including drilling and plugging holes etc. in apron .
M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron .
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm/ 450 x 350 x 7mm thick (Ist quality) as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) finished even and rough .
M&L for granite strips in door position of size 18-20 mm in thick, 20 to 30 mm width after removing the existing floor including screed bed complete all as specified and as directed by the Engineer-in-Charge.
S&F aluminium XPM wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
Supply and fixing outdoor integral LED Bollard decorative mushroom shape with IP 65 protection luminaire 9 watt with incl PCC 1:2:4 TYPE B2 foundation Of garden light ,copper conductor flexible wire from busbar to connector all as specified and as directed. Make : Bajaj cat no BLBMC9W WW LED or equivalent as approved by GE
Supply and fixing outdoor integral post top lantern luminaire watt incl 60 w LED ,IP 65 protection ,type and three core twisted copper conductor flexible wire from busbar to connector all as specified and as directed.
Supply, fixing and cable junction boxes of size 155mm x 210mm x 92mm IP 66 for cable entry, comprising of SPN aluminium bus bar of capacity 16 Amp 230 Volt fixed , making holes on strips for connecting cables and fixed to garden light pole with and including MS clamp of size 25mmx5mm incl nut ,bolt, washer and and including prvn of MCB SP 6 A, C curve 10kA breaking capacity with mounting rail all as specified and as directed.
Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed
Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.
Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.
Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 6 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 6 sq mm including 20mm dia PVC conduit inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified
Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified
Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 95 Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed.
Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed.
Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 6 Sqmm 2 core laid in trench /poles/on wall all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of FRLS cable etc and getting out in Soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed
Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed
Material and labour for sand cushioning for protection of underground FRLS cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)
Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 complete all as directed by Engr-in-Charge.
Borng of holes under road ,pavement hard standing by trenchless tecnology using ultrasound technology & necessary machine including HDPE pipe up to 150 mm dia suitable for 0.4 mpa working pressure.
Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc with taking down old unserviceable ,all as specified and as directed by the Engineer-in-charge.
Supply and fixing LED flood light 80 W luminaire efficency of 125 lm/Watt IP 66 protection . guard,along complete all accessories prewired and hardware in high tensile with corrosive epoxy grey shade paint fixed to wall/ceilling including flexible wire from fitting to terminal point ,complete all as specified and as directed by the engr-in-charge. Make CG cat no -LCNP-80-CD60PM600 or equivalent model in PHILIPS/BAJAJ.
Material and labour for galvanized iron tubing 25mm bore light grade with all fitting for protection of FRLS cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and as directed. (Make TATA, JINDAL,Prakash) Note:Excavation ,earth work shall be measured and paid separately
M&L for Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slote up to 2 mtrs length buried directly and preferably vertically in ground with top flanged ended 2 mtrs below ground lebel welded/connected with GI strip 32X6 mm dia Galvanised iron or steel wire, connected to Earth pit to DB for earthing including filling the pit with charcol common salt surrounding the earth pipe includingdrilling 400 mm dia bore in any strata of soil to lower the CI pipe complete
VASANTHA NAIDU ASSOCIATES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .