Construction of Library, Balance Boundary Wall and Playground at Dhamnagar College, Bhadrak

Sub Non-

Abs. Schedule Schedule Non-Schedule

Head Unit Qnty. Schedule

Sr. Rate Amount Amount

Sl. No. Rate

1 Civil Works 0.00 0.00

2 1 Site Clearance

Cleaning & grubbing road land including uprooting

rankvegetation, grass ,bushes, shurbes, sapling and trees girth

upto 300mm, removal of stumps of trees cut earier and disposal

3 of unsevicable materials and stacking of servicable materials to sqm 1397.76 9.971 13,937.06 0.00

be used or auctioned up to lead of 1000 meters including

removal and disposal of top organic soil not exceeding 150mm

thickness.

4 Site development sqm 26534.34 9.97 2,64,573.87

5 2 Loosening, leveling 0.00 0.00

Loosening, leveling and Compacting original ground to facilitate

placement of first layer of embankment, scarified to a depth of

150mm, compacted at OMC to achieve minimum dry density

conforming to Table 300-2 as per Technical Specifications and

Clause - 305.3.4 of MoRT&H Specifications for Road & Bridge

works (5th Revision).

7 Site development Cum 3832.55 303.26 11,62,259.28 0.00

8 3 Grass turf 0.00

Providing and laying Neelgiri/Mexican grass turf with earth 50mm

to 60mm thickness of existing ground prepared with proper level

and ramming with tools wooden (Dhurmos) and than rolling the

surface with light roller make the surface smoothen and light

9 waterning with sprinkler and maintenance for 30 days or more till 0.00 0.00

the grass establish properly, as per direction of officer-in-

charge.(REF: Horticulture & Landscaping DSR-2025 , Page no-

302 , Seriel No-2.33).

10 Site development sqm 25550.34 42.54 10,86,885.91

11 4 Earthwork Excavation 0.00 0.00

Earth work in excavation of foundation in HARD soil within 50m

lead and 1.5m lift including rough dressing and breaking clods

12 a) to maximum 5cm. To 7cm. And laying in layers not exceeding 0.00 0.00

0.3m in depth and as per specification complete.

13 0.00m to 1.5m Cum 429.90 326.7302 1,40,461.31 0.00

14 Site development cum 165.00 326.7302 53,910.48 0.00

15 3 Sand Filling 0.00 0.00

Filling in foundation, trenches and plinth with river sand, well

watered and compacted in layers of 1.8 mtr, with top surface

dressed and leveled to proper gradient including cost of all

16 materials, conveyance, all taxes and royalties, loading and Cum 434.43 1103.418 4,79,358.51 0.00

unloading, including cost of all labour, sundries, T & P etc. All

complete as per directions of the Engineer -in-charge.

17 Site development cum 16.50 1103.418 18,206.40 0.00

18 4 Back Filling 0.00 0.00

Filling available excavated earth (excluding rock) in trenches

plinth sides of foundation etc. in layers not exceeding 20 cm in

depth , consolidating each deposited layers by ramming and

19 watering, lead up to 50m and lift up to 1.5 mt etc. including cost cum 214.95 181.5194 39,017.60 0.00

of all labour, sundries T & P etc complete in all respect as per

the direction of Engineer-In-Charge.

20 Site development cum 82.50 181.5194 14,975.35 0.00

21 5 M-25 Pile 0.00 0.00

Providing, driving with hydraulic piling rigs with power units and

installing driven cast-in-situ reinforced cement concrete piles of

grade M-25 of specified diameter and length below the pile cap,

to carry safe working load not less than specified, excluding the

22 cost of steel reinforcement but including the cost of shoe and Rmt 990.00 4129.95 40,88,650.50 0.00

the length of pile to be embedded in the pile cap etc. all

complete. (Length of pile for payment shall be measured from

top of shoe to the bottom of pile cap) (DSR 2023 Vol-II, Page

No: 293, Item No-20.1.4)

Cement concrete of proportion (1:3:6) in foundation and floors

using 4cm size clean hard black crusher broken granite stone

metal of approved quality and from approved quarry including

hoisting, lowering and laying concrete in layers not exceeding 15

24 cm. (6") thick to the required level ramming, watering, curing Cum 218.78 8684.1274 18,99,906.58 0.00

etc. complete including cost, conveyance, royalties of all

materials with all labour and T&P required for the work etc.

complete in all respect and as per the direction of the Engineer-

in-charge.

25 Site development cum 30.02 8684.13 2,60,719.21 0.00

26 7 Anti-termite Treatment 0.00 0.00

Providing & applying of pre constructional anti-termite

treatment Confirming to IS 6313 (Part-II) and creating chemical

barrier under and around the column pits, wall trenches,

basement excavation top surface of plinth filling, junction of wall

and floors along with external perimeters of building, expansion

joints, surrounding the pipes and conducts etc. at the rate at 7

27 ,5 liter per sqm on vertical surface and 5.0 liter per sqm on sqm 939.98 123.3572 0.00 1,15,953.30

horizontal surface. Chemicals:- Imidachloprid 30.5 SC , Doses: -

2.1 ml per lit of water cost of all materials, labour,conveyance,

T&P , all taxes and hire charges of machinaries as per direction

of Engineer-incharge. (Make :- HI-Solution or Smart Care Pest

Control or Bharat Pest Eradicators)

28 8 Fly Ash brick(1:6) 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Fly Ash brick masonry in cement mortar (1:6) in Substructure

using Fly Ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having a

crushing strength of not less than 75 kg./sqcm with dimensional

tolerance ± 2% including splays cutting circular moulding

chamfering and corbelling and similar such type of works with all

29 necessary projections watering and curing after immersing the 0.00 0.00

bricks in water at least for six hours before use including cost,

conveyance, royalties and taxes of all materials with all

labour,labour cess and T & P required for the work complete in

all respect as per direction of Engineer-in-Charge.

30 Foundation cum 36.93 6654.5746 2,45,778.10 0.00

Providing, lifting, hoisting and laying Reinforced cement

concrete of M-25 grade as per approved designs and drawings

having a minimum compressive strength (in work test) 250 Kg.

/ Square cm. in 15 cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 516 using 12mm. to 20 mm.

size black hard crushed broken granite stone chips and screened

and washed sharp sand for mortar of approved quality from

approved quarry, washed and cleaned ( 20mm. size chips not

to exceeds 25 %) to be mixed in concrete mixture with Portland

slag cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and curing for

32 28 days, centering and shuttering then after dismantling and 0.00 0.00

removing debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and

taxes of all materials and cost of all labours, sundries, T & P

required of the work etc.complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of

M.S. rods or Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

33 Foundation and plinth 0.00 0.00

34 Pile Cap Cum 187.49 9113.0692 17,08,609.34 0.00

35 Column (Below Plinth) Cum 4.26 20043.303 85,384.47 0.00

36 Plinth beam Cum 88.46 10140.0704 8,96,958.79 0.00

37 Site development 0.00 0.00

38 Foundation and plinth cum 49.50 9113.0692 4,51,096.93 0.00

39 Column cum 6.19 20043.303 1,24,068.05 0.00

40 Plinth beam cum 33.81 10140.0704 3,42,797.75 0.00

41 Ground Floor 0.00 0.00

42 Column Cum 38.35 20043.303 7,68,660.67 0.00

43 Staircase Cum 7.67 19888.5932 1,52,545.51 0.00

44 Lintel Cum 10.77 18155.7278 1,95,537.19 0.00

45 Chhaja Sqm 39.00 1552.9508 60,565.08 0.00

46 Roof Beam Cum 99.56 20043.303 19,95,511.25 0.00

47 Roof Slab Cum 117.22 17665.6974 20,70,773.05 0.00

48 Site development 0.00 0.00

49 Ground Floor 0.00 0.00

50 Column cum 30.94 20043.30 6,20,089.69 0.00

51 First Floor 0.00 0.00

52 Column Cum 32.77 22461.6186 7,36,067.24 0.00

53 Staircase Cum 8.17 22275.9692 1,81,994.67 0.00

54 Lintel Cum 8.49 20196.4434 1,71,467.80 0.00

55 Chhaja Sqm 52.80 1760.1588 92,936.38 0.00

56 Roof Beam Cum 113.20 22461.6186 25,42,655.23 0.00

57 Roof Slab Cum 112.92 19608.473 22,14,188.77 0.00

58 Terrace Floor 0.00 0.00

59 Column Cum 6.36 25356.4064 1,61,266.74 0.00

60 Lintel Cum 1.40 22638.1112 31,693.36 0.00

61 Chhaja Sqm 2.76 2008.3482 5,543.04 0.00

62 Roof Beam Cum 4.58 25356.4064 1,16,132.34 0.00

63 Roof Slab Cum 7.37 21932.5656 1,61,643.01 0.00

64 10 Reinforcement 0.00 0.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or

tor steel of primary steel producers such as SAIL / Tiscon / RINL

/ JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including

bending, binding, welding and jointing if necessary and tying the

grills and placing in position as required for R.C.C. Work and for

providing fan hooks as required, hoisting, lowering, laying

65 including cost, conveyances, taxes of M.S. Rod or tor steel and 0.00 0.00

binding wires of 18 to 20 gauge and labour required for the work

for bending, binding and tying the grills in all floors with labour

cess etc. (payment will be made on standard weight of B.I.S. for

M.S. Rods or tor steel only) etc. complete as per specification &

direction of Engineer-in-charge.

66 Foundation and plinth qtl 597.29 10207.5546 60,96,870.29 0.00

67 Ground Floor qtl 372.78 10207.5546 38,05,172.20 0.00

68 First Floor qtl 377.35 10247.0138 38,66,710.66 0.00

69 Terrace Floor qtl 29.85 10288.4554 3,07,110.39 0.00

70 Site development 0.00 0.00

71 Foundation and plinth qntl 117.83 10207.55 12,02,756.16 0.00

72 Ground Floor qntl 71.16 10207.55 7,26,331.31 0.00

73 11 FLY ASH BRICK(1:6) 0.00 0.00

Fly Ash brick masonry in cement mortar (1:6) in super structure

using Fly Ash bricks of 25 Cm. x 12 Cm. x 8 Cm size having a

crushing strength of not less than 75 kg./sqcm with dimensional

tolerance ± 2% including splays cutting circular moulding

74 chamfering and corbelling and similar such type of works with all 0.00 0.00

necessary projections watering and curing after immersing the

bricks in water at least for six hours before use including cost,

conveyance, royalties and taxes of

all materials with all labour,labour cess and T & P required for

75 the work complete in all respect as per direction of Engineer-in- 0.00 0.00

Charge.

76 Ground Floor cum 201.65 6699.8158 13,50,992.06 0.00

77 First Floor cum 154.88 7146.3042 11,06,819.59 0.00

78 Terrace Floor cum 61.51 7659.7812 4,71,153.14 0.00

79 Site development 0.00 0.00

80 Sub Structure cum 67.61 6654.57 4,49,932.43 0.00

81 Super Structure cum 281.72 6699.82 18,87,463.73 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

82 12 FLY ASH BRICK(1:4) 0.00 0.00

Providing Fly ash bricks masonry work using 25 Cm. x 12 Cm. x

8 Cm having crushing strength not less than 75Kg/Sqcm in

cement mortar (1:4). Immersing the bricks in water before use

in all necessary projection splays cutting, circular moulding,

83 corbelling etc. Including cost of conveyance ,taxes & royalties, 0.00 0.00

loading and unloading of all materials & cost of all labour,

scaffolding ,watering & curing ,sundries, T & P etc. complete as

per the direction of Engineer-in-charge .

84 Ground Floor cum 4.82 7240.5508 34,874.47 0.00

85 First Floor cum 4.81 7687.0392 36,974.66 0.00

86 13 16 mm Plastering 0.00 0.00

Providing 16 mm thick cement plaster with cement mortar of

mix (1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

87 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all

labour,labour cess, T&P, and scaffolding required for the work

etc. complete in all respect as directed by the Engineer in

charge.

88 Ground Floor sqm 467.82 329.7864 1,54,280.67 0.00

89 First Floor sqm 531.22 343.5452 1,82,498.08 0.00

90 Terrace Floor sqm 422.51 357.9884 1,51,253.68 0.00

91 14 12 mm Plastering 0.00 0.00

Providing 12 mm thick cement plaster with cement mortar of

mix (1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

92 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all

labour,labour cess, T&P, and scaffolding required for the work

etc. complete in all respect as directed by the Engineer in

charge.

93 Ground Floor sqm 1758.19 229.2622 4,03,086.51 0.00

94 First Floor sqm 1310.93 234.7728 3,07,770.71 0.00

95 Terrace Floor sqm 139.33 240.4486 33,501.70 0.00

96 Site development sqm 2366.44 229.26 5,42,535.24 0.00

97 15 6 mm Plastering 0.00 0.00

Providing 6 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to R.C.C. work after closed deep chipping &

slurry treatment including watering and curing, rounding of

corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,

T&P, and scaffolding required for the work etc. complete in all

respect as directed by the Engineer in charge.

99 Ground Floor sqm 950.58 254.3726 2,41,801.51 0.00

100 First Floor sqm 1067.57 260.8272 2,78,451.29 0.00

101 Terrace Floor sqm 65.34 267.4824 17,477.30 0.00

102 Site development sqm 309.38 254.37 78,696.52 0.00

103 16 Water Proofing 0.00 0.00

Providing and installing two component acrylic modified

cementitious waterproofing coating with Nerolac Perma Guard

2K/ Equivalent with Nerolac Perma Fibre Mesh 45 GSM over

roof slab after carring out pond test on roof slab filling all

defects. Saturating the surface mixing the products and then

application in 1.0 mm thickness (1.8kg/sqm coverage rate for

1.0mm thickness) in suitable layers complete in all respect all

material, tools, plant & labour complete in all respect. Density

1850kg/m3, mix ratio (Powder to liquid ) 2:1 by weight water.

105 Terrace Floor sqm 939.97 548.228 0.00 5,15,317.87

106 17 Grading Plaster 0.00 0.00

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab

including watering and curing with cost, conveyance, royalties of

all materials with cost of all labour, labour cess and T&P

required for the work etc. complete in all respect as directed by

the Engineer in charge.

108 Terrace Floor sqm 939.97 581.4096 5,46,507.58 0.00

109 18 Vitrified Floor Tiles 0.00 0.00

Providing vitrified tiles having thickness of min 10mm

conforming to IS 13755 of 600x1200 (shade to be decided as

per Ama Hospital scheme) (homogeneous) of premium quality

in floors, treads on steps and landings on 20mm thick bed of

cement mortar of mix (1:4) laid in proper slope and gradient

with screened and washed sharp sand for mortar and fixing with

neat white cement slurry,grouting the joints with neat white

110 cement slurry mixed with required quantities of pigments of 0.00 0.00

approved make to match the shades of the vitrified tile if

required , watering and curing for 21 days, including cost,

conveyance, loading, unloading, royalties and taxes of all

materials, cost of all labour,Labour cess, sundries, T&P required

for the work, complete in all respect as per specification and

direction of Engineer-in-charge.

111 Ground Floor sqm 693.38 1306.6494 9,06,004.56 0.00

112 First Floor sqm 706.03 1306.6494 9,22,533.68 0.00

113 19 Vitrified Floor Skirting 0.00 0.00

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm

x 600mm Plain (Ivory) as directed by Engineer-in-charge in

dados skirting and risers of steps on 12mm thick cement plaster

114 (1:3) jointed with neat cement slurry mixed with pigment to 0.00 0.00

match the shades of the tiles including rubbing and polishing

etc. complete with cost, conveyance, royalties of all materials all

labour, labour cess complete in all respects.

115 Ground Floor sqm 56.77 1519.486 86,261.22 0.00

116 First Floor sqm 38.28 1543.4046 59,081.53 0.00

117 20 Glass Fibre Reinforced Gypsum False ceiling 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Providing & fixing false ceiling at all heights with GRG (Glass

Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm

of approved texture, design and patterns having moisture

content less than 2%, humidity resistance of 99%, NRC0.50 to

0.75 as per IS 8225:1987, Non combustible as per BS 476 (part

4)-1970 and light reflectance of 85% (minimum) to be laid in

true horizontal level suspended on inter-locking metal T-Grid of

hot dipped galvanised iron section of 0.33 mm thick (galvanized

@ 120 gram per sqm including both sides) comprising of main-T

runners of size 15x32 mm of length 3000 mm, cross - T of size

15x32 mm of length 1200 mm and secondary intermediate cross-

T of size 15x32 mm of length 600 mm to form grid module of

118 size 600 x 600 mm, suspended from ceiling using galvanised 0.00 0.00

mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm

long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully

threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 85x25x2 mm. Galvanised iron perimeter wall

angle of size 24x24x0.40 mm of length 3000 mm to be fixed on

periphery wall / partition with the help of plastic rawl plugs at

450 mm center to center and 40 mm long dry wall wood screws.

The work shall be carried out as per specifications, drawing and

as per directions of the Engineer-in-Charge.DSR 2023 Sl No-

119 Ground Floor sqm 693.38 1907.35 13,22,518.34 0.00

120 First Floor sqm 706.03 1907.35 13,46,646.32 0.00

121 21 Ceramic Toilet tiles 0.00 0.00

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm /

40cm x40 cm in floors of size of approved make with 20mm

122 thick bed of cement mortar (1:4) jointed with neat cement slury 0.00 0.00

mixed with pigment to match the shades of the tiles complete

including cost of all materials,Labour T&P etc required for the

123 Ground Floor sqm 40.78 1085.7416 44,276.54 0.00

124 First Floor sqm 40.78 1101.6362 44,924.72 0.00

125 22 Ceramic Skirting 0.00 0.00

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of

steps on 12 mm thick cement plaster (1:3) Jointed with neat

126 cement slury mixed with pigments to match the shade of the 0.00 0.00

tiles including rubbing and polishing including cost of all

meterials etc. complete.

127 Ground Floor sqm 152.37 1024.2282 1,56,061.65 0.00

128 First Floor sqm 152.37 1040.1228 1,58,483.51 0.00

129 23 Aluminium Lay-in Plain False ceiling 0.00 0.00

Providing & Fixing horizontal level suspended ceiling comprising

of Knauf Aluminium Lay-in Plain 600x600mm (Nominal Size)

130 tiles made of AA-3003-H14 (Tempered) grade Aluminium 0.00 0.00

suitable for architectural finishes in 0.7mm thickness

as per in IS:2676 (1981) in Global white color with Square

Tegular edge having 8mm drop and 10mm flange. The

difference between the 2 diagonal dimensions of the tile to be

less than 1mm. Tiles shall be flattened by precision leveller to

minimize sag to less than 1/400mm. The tile shall be

electrostatically polyester powder coated using RoHS compliant

powder having coating thickness ranging from 60-80 microns.

The powder coating shall pass Salt Spray Test for 750 hours as

per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154

131 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 0.00 0.00

50017. The powder coating shall have an adhesion of GT0 as

per EN ISO 2409. The shade variation across batches shall be

delta E<1 using Excite/BYK Gardner instrument and gloss level

of 25±5% at 60˚ as per ASTM D523.The tile shall have a Light

Reflectance of ≥ 63% in accordance to ASTM 1477-98 and Fire

Performance of class 0/1 as per BS 476 Part 6 & 7 in module

size of 600x600mm. All border cut tiles shall be laid, using

Knauf lay-in end cap for installation to have a tegular effect on

perimeters.

132 Ground Floor sqm 40.78 4071 0.00 1,66,015.38

133 First Floor sqm 40.78 4071 0.00 1,66,015.38

134 24 Granite tile 0.00 0.00

Fixing granite tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm

thick bed of cement mortar (1:4) jointed with neat cement

135 slurry mixed with pigment to match the shades of the tiles 0.00 0.00

including rubbing and polishing etc. complete with cost,

conveyance, royalties of all materials complete in all respects as

per direction of Engineer-in-Charge.

136 Ground Floor sqm 245.91 3324.4494 8,17,515.35 0.00

137 First Floor sqm 65.10 3340.344 2,17,456.39 0.00

138 25 Granite Skirting 0.00 0.00

Supplying, fitting & fixing of Granite Tiles of minimum Above

0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in

dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3

139 course sand) and filling joints with slurry including cost of all 0.00 0.00

materials, labour T&P etc. required for the work all complete

incl. rubbing as per direction of the Engineer-in-charge

140 Ground Floor sqm 8.00 2447.3436 19,578.75 0.00

141 First Floor sqm 3.85 2471.2622 9,514.36 0.00

142 26 Fire DOOR 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Providing and fixing ISI Marked insulated fire rated door

confirming to IS 3614: 2021, & tested to IS17518, and shall

carry a unique label with certification/test report number. The

fire rating shall be for 120minutes integrity and 30minutes

insulation. Material shall be galvanised steel conforming to IS

277, made out of minimum 1.2 (18 SWG) for both frame and

shutter, G.I. sheet (zinc coating 120 gsm). Frame shall be 125 x

75 grooved step profile with built in rebate for fire rated smoke

seal. Frame shall be mitered and field assembled. EPDM smoke

seal to be provided along with frame as standard. Door shutter

shall be double skin of 60mm thick step with required fire rating

and insulation with vision panel. The infill material shall be high

density mineral wool of minimum 120kg/sq.m3. Intumescent

seal shall be provided on all around the door leaf of minimum

size 15 x 1.5mm thick. All doorset shall be factory prepped for

receiving appropriate hardware and provided with necessary

143 reinforcement for hinges, locks and door closers. The door stiles 0.00 0.00

should be interlocked, for pairs of doors integral astragals has to

be provided on the meeting stile for both active and inactive

leaf. Vision lite, minimum 5mm clear fire rated glass of size 200

x 300mm (max 0.06sq.mt) on shutter, fixing with clipon

arrangement. All frame and door shutter shall be finished

polyster powder coated to minimum 50microns, of approved

colour as per the direction of the engineer incharge. Cost of

doorset shall include following hardware and accessories as a

complete assembly. SS ball bearing hinges of SS304 grade of

size 100x75x3mm, 1 set Panic device for double leaf doorset

and external trim with key cylinder tested as per EN1125 and CE

marked. 1no Door closer per leaf with spring size of EN 3-5, as

per EN1154 & CE marked,1no door door coordinator also be

given in case of double leaf door. Suitable anchor fastners for

fixing on different type of wall construction as per manufacturer

recommendation.Once frames is installed it shall be filled with

144 fire rated

Ground PUF. Manufacturer test certificates shall covers

Floor sqm 6.93 33814.08 0.00 2,34,331.57

145 First Floor sqm 6.93 33814.08 0.00 2,34,331.57

146 27 Glass Door 0.00 0.00

Providing and fixing glazed shutters for doors, windows and

clerestory windows using 4 mm thick float glass panes (weight

147 not less than 10 kg per sqm) fixing with ISI marked M.S. 0.00 0.00

pressed butt hinges bright finished of required size with

necessary screws. DSR 2023 P-137 Cl No-

148 Ground Floor sqm 8.64 4523.4 39,082.18 0.00

149 28 UPVC DOOR 0.00 0.00

Supplying , fitting and fixing of openable UPVC doors with door

frame of approved make with 6mm thick glass of approved

150 quality complete with frame, shutters and all fitting and fixtures. 0.00 0.00

SOR 2022 P-235 Sl No-13

151 Ground Floor sqm 43.89 10244.9016 4,49,648.73 0.00

152 First Floor sqm 24.36 10244.9016 2,49,565.80 0.00

153 29 Sliding Door 0.00 0.00

Two-track, two-panel sliding door (2 nos. PVC panels) made

with frame 62x50 mm and door sash 50x79 mm, both having

154 wall thickness of 2.5 mm (±0.2 mm), and fitted with single 0.00 0.00

glazing bead of appropriate dimension

155 Ground Floor sqm 2.52 11800 29,736.00 0.00

156 First Floor sqm 2.52 11800 29,736.00 0.00

157 30 WPC Door Frame 0.00 0.00

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid door/window/ clerestory windows &

desertory other Frames/Chowkhat of Frame size 45 x 70 mm

comprising of virgin PVC polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood powder/

rice husk/ wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints

after applying PVC solvent cement and screwed with full body

threaded star headed SS screws having minimum frame density

of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) &

1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of

flame of Class A category with property of being termite/borer

proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required

dia andlength complete as per direction of Engineer-In- Charge.

(M.S hold fast/lugs or SS dash fasteners shall be paid for

separately). (DSR 2023, Page No: 341, Item No-26.86.1)

159 Ground Floor rmt 24.75 705.85 17,469.79 0.00

160 First Floor rmt 24.75 705.85 17,469.79 0.00

161 31 WPC Door Shutter 0.00 0.00

Providing and fixing factory made single extruded WPC (Wood

Polymer Composite) solid decorative type flush door shutter of

30 mm thick of required size comprising of virgin polymer of K

value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/ wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength

of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property

of being termite/borer proof, water/moisture proof and fire

retardant. WPC to be laminated with PVC foil of minimum 14

microns thick of approved design pasted with hot melt adhesive

on both faces of shutter and fixing with stainless steel butt

hinges of required size with necessary full body threaded star

headed counter sunk S.S screws, all as per direction of Engineer-

In- Charge. (Note: stainlesssteel butt hinges and necessary S.S

screws shall be paid separately) (DSR 2023, Page No: 342, Item

163 Ground Floor sqm 7.88 4764.2 37,541.90 0.00

164 First Floor sqm 7.88 4764.2 37,541.90 0.00

165 32 UPVC WINDOWS 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride)

Sliding windows (Make: Fenstech) 3 Track Windows made out of

hollow- chambered UPVC Sections having isolated drainage and

reinforced throughout with galvanized steel. The 3 track outer

frame of the window shall be made out of UPVC sections having

an overall size of 60mm x 112mm x 2mm thickness or

Equivalent for shutter frames of 60mm x 45mm x 2mm

thickness mounting single

glazing system. Structurally Reinforced with hot dip galvanized

up to 50 microns of minimum thickness of 1.2mm with moldings

glazing Beading (up 5mm to 18mm) with interlocking system.

Prefabricated & welded through fusion welding the window outer

frame & sash shall be fitted with 5mm thickness Clearglass of

reputed brand (Saint Gobain Glass) make duly fixed with EPDM

rubber, weathering sealant & Accessories like touch lock made

by brand. The outer frame & sash is to be installed at the side

167 using anchor fastener, Silicon Rubber Sealant, easy glazing at 0.00 0.00

the side. At least 15 years manufacturing warranty for

discoloration, wrapping, mechanical failures, Shrinkages,

Rooting Corrosion etc. with a quality Certificate from relevant

departments of that government through the Dealers including

of all materials and abounds etc. Complete as per directions of

Engineer in-charge.

168 Ground Floor sqm 84.24 10059.8493 0.00 8,47,441.71

169 First Floor sqm 93.56 10059.8493 0.00 9,41,199.50

170 33 UPVC WINDOWS 0.00 0.00

Supplying , fitting and fixing of two track UPVC sliding window of

171 approved make with 6mm thick glass of approved quality 0.00 0.00

complete with frame, shutters and all fitting and fixtures. SOR

172 Ground Floor sqm 10.13 5853.9446 59,300.46 0.00

173 First Floor sqm 10.13 5853.9446 59,300.46 0.00

174 Terrace Floor sqm 4.05 5853.9446 23,708.48 0.00

175 34 Ventilator 0.00 0.00

Fixed window / ventilator without mullion / transom. :Using R1

176 series with frame (33mm & above ) x (35mm & above). (Height 0.00 0.00

upto 0.90 metre) (DSR Vol-1,2023 P-160, Clause No-

177 Ground Floor sqm 1.80 9155.2 16,479.36 0.00

178 First Floor sqm 1.80 9155.2 16,479.36 0.00

179 35 M.S.Door 0.00 0.00

Supplying, fitting & fixing in all floors of M.S. grills, grill gates,

M.S. gates, garage door, collapsible gates with top and bottom

rails, steel windows, critical frames for windows, stair case and

parapet railing made out of M.S Square bar/ flat including stair

case hand railing with 40mm. dia G.I.pipe etc. including painting

two coats over a coat of redoxide primer as per approved

drawing and design with cost of all materials & labour, labour

cess, T&P, sundries etc. complete in all respect as per

specification & direction of the Engineer-in-Charge.

181 Ground Floor kg 108.00 143.9718 15,548.95 0.00

182 First Floor kg 108.00 143.9718 15,548.95 0.00

183 Terrace Floor kg 168.00 143.9718 24,187.26 0.00

184 36 M.S.Grill 0.00 0.00

Supplying, fitting & fixing in all floors of M.S. grills, grill gates,

M.S. gates, garage door, collapsible gates with top and bottom

rails, steel windows, critical frames for windows, stair case and

parapet railing made out of M.S Square bar/ flat including stair

case hand railing with 40mm. dia G.I.pipe etc. including painting

two coats over a coat of redoxide primer as per approved

drawing and design with cost of all materials & labour, labour

cess, T&P, sundries etc. complete in all respect as per

specification & direction of the Engineer-in-Charge.

186 Ground Floor kg 2115.74 143.9718 3,04,606.90 0.00

187 First Floor kg 2320.78 143.9718 3,34,126.87 0.00

188 Terrace Floor kg 89.10 143.9718 12,827.89 0.00

189 37 S.S. RAILING 0.00 0.00

Supplying, fitting and fixing of Stainless steel of 304 grade in

hand railing using 50mm dia of 2mm thick circular pipe with

Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and

stainless square pipe bracing of size 32mm x32mm x 2mm in 3

190 rows in stair case as per approved design and specification, 0.00 0.00

buffing, polishing etc with cost, conveyance, taxes of all

materials, cost of all labour,labour cess, T&P etc. required for

the work complete in all respect as per direction of the Engineer-

in-charge

191 Ground Floor kg 295.54 404.9406 1,19,676.14 0.00

192 First Floor kg 352.13 404.9406 1,42,591.73 0.00

193 38 Synthetic Enamel Paint (Iron Work) 0.00 0.00

Painting two coat with approved synthetic enamel paint to new

iron work over a coat of Red oxide primer including cost,

194 conveyances, royalties, taxes of all materials and cost of all 0.00 0.00

labour with T&P required for the work etc. complete as

195 per specification & direction of Engineer in charge. 0.00 0.00

196 Ground Floor sqm 97.52 312.464 30,471.49 0.00

197 First Floor sqm 106.84 320.37 34,228.33 0.00

198 Terrace Floor sqm 4.05 328.748 1,331.43 0.00

199 39 Antifungal Weather Coat Paint 0.00 0.00

Wall painting two coats with Antifungal weather coat paint (1st

quality) exterior grade of approved make & approved shade

over a coat of primer to make an even finished surface in all

floors and heights with all scaffolding and staging charges

including cost, conveyance, cost of all labours, T & P, sundries

etc. as required for the work complete in all respect as per the

direction of the Engineer-in-Charge.

201 Ground Floor sqm 591.68 119.18 70,516.42 0.00

202 First Floor sqm 650.54 120.832 78,606.05 0.00

203 Terrace Floor sqm 428.85 122.602 52,577.87 0.00

204 Site development sqm 2675.82 119.18 3,18,903.63 0.00

205 40 Plastic Emulsion Paint 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Painting two coats with plastic emulsion paint with a approved

quality primer to make an even finished surface in all floors and

heights to wall surface of approved make and shade including

sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all

labour,labour cess, T&P etc. complete as per the direction of the

Engineer-in-charge.

207 Ground Floor sqm 2584.91 128.5374 3,32,257.61 0.00

208 First Floor sqm 2259.18 131.1098 2,96,200.64 0.00

209 Terrace Floor sqm 198.33 133.7766 26,531.91 0.00

210 41 Cement Primer 0.00 0.00

Priming one coat with wall cement primer (water bound) to

make an even finished surface in all floors and heights to wall

surface of approved make and shade including sand papering,

applying putty wherever necessary & cost of scaffolding, staging

charges with cost, conveyance, cost of all labour,labour cess T&P

etc. complete as per the direction of the Engineer-in-charge.

212 Ground Floor sqm 3176.59 97.468 3,09,615.87 0.00

213 First Floor sqm 2909.7 99.828 2,90,471.53 0.00

214 Terrace Floor sqm 627.18 102.188 64,090.27 0.00

215 Site development sqm 2675.82 97.47 2,60,806.34 0.00

216 42 Putty 0.00 0.00

Finishing plastered surfaces of walls with cement based wall

putty (Water based) of approved make (JK White/ Birla white or

equivalent make duly approved by Engineer-in-Charge) and

finishing the surface smooth and even by sand papering to

217 receive painting in walls, at all heights with staging wherever 0.00 0.00

necessary with cost, conveyance, cost of all labour,labourcess,

all T&P etc. required for the work complete in all respect as per

the direction of the Engineer-in-charge.

218 Ground Floor sqm 3176.59 100.536 3,19,361.65 0.00

219 First Floor sqm 2909.72 100.536 2,92,531.61 0.00

220 Terrace Floor sqm 627.18 100.536 63,054.17 0.00

221 43 GFRC Mould 0.00 0.00

Manufacturing, Providing & Installation of GFRC (Glass Fiber

Reinforced Concrete), Make 'SAMUDYAM', thickness of 25 mm &

border thickness of 50 mm, with Pattern, design, and colour of

approved make to be fixed on/between RCC /Block work Column

or structural work with Dry Fixing method with appropriate SS

Pipe & Cleats frame work, using fasteners, and necessary

hardware etc.The element shall be made from '53 grade'

Portland Cement make Biria/ 'JK Cement' or equivalent, Quartz,

222 Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Nos 7.00 145730 0.00 10,20,110.00

Corning or equivalent, Super plasticizers / Additives make by

'BASF or equivalent, Polymers make 'BASF' or equivalent and

U.V resistant Synthetic inorganic pigments shall be used for

pigmentation make BAYFERROX (Germany)' or equivalent.The

material casting shall take place in Synthetic Rubber / FRP

Mould manufactured by Mould / Tool / Mould Grade Resin of

Revex/ Reckli' or equivalent.

223 44 MCM Cladding 0.00 0.00

Supply and fixing of MCM Modified Clay Material ‐ MCM R Series

Brick (087089) ‐ 222 x 63 mm of PHOMI make, as per company

standard dimension, pattern, color as specified, manufactured

224 through unfired patented (Ref: US patent 8505840 B2 & 0.00 0.00

European Patent 2157139) manufacturing technology, bonded

together by using low heat temperature and having CE

approval

with the thermal conductivity of 0.0590 W/M.K — EN 12667

(2001), thermal resistance of 0.0568 M2 K/W— EN 12667

(2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The

product should be patented from United States and Europe and

with certifications by IGBC, Singapore Green Label and China

Green Building material. MCM Materials should be fixed with

225 suitable Cement/ Polymer/Epoxy based adhesive as per Sqm 139.08 7232.869 0.00 10,05,922.83

adhesive chart and substrate and per directions of Engineer

in‐charge. Grouting should be done using filling and pointing

method as per installation drawing provided, and color of the

grout should be as per the architect’s specification depending on

the substrate and as per the direction of Engineer in‐charge.

226 Pole Nos 1.00 1,77,566.99 0.00 1,77,566.99

227 Sub Base Sqm 608.00 2,640.25 0.00 16,05,272.00

228 Synthetic Coating Sqm 508.00 1,886.75 0.00 9,58,468.59

229 Vollyball Pole L.S 1.00 24,190.00 0.00 24,190.00

230 Kho-Kho Pole L.S 1.00 15,694.00 0.00 15,694.00

GROUND FLOOR

(LIBRARY BLOCK)

Supplying & Placing 8 seater table with an overall size 1800mm

X 900mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with

approved laminate and finish as per approved shade. The profile

shall be in rectangle shape and the edges shall be sealed with

2mm thick thin strip of impermeable PVC that is cut to fit the

size of board panel and duly pasted with the assistance of edge

231 1 banding machine at 200 degree Celsius. The top shall be Nos 16.00 17700 0.00 2,83,200.00

supported on MS/CRCA rectangle pipe frame having cross-

section area 70mm X 20mm with 1.6mm thick. The

understructure shall consist of four legs made up of MS round

pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be

made using TIG welding. The metal parts shall be powder

coated to dry film thickness of 40-60µ. There shall be PPCP shoe

provided at bottom to avoid scratches on the floor.

Make-Geeken

Model-GC 9032

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

JOURNAL ROOM

Supplying & Placing 8 seater table with an overall size 1800mm X 900mm X

750mm. The top shall be made up of 25mm thick Pre-laminated particle board

of grade II of IS 12823 with approved laminate and finish as per approved

shade. The profile shall be in rectangle shape and the edges shall be sealed with

2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200

degree Celsius. The top shall be supported on MS/CRCA rectangle pipe frame

232 2 having cross-section area 70mm X 20mm with 1.6mm thick. The understructure Nos 2.00 17110 0.00 34,220.00

shall consist of four legs made up of MS round pipe having dia. 38.1mm with

1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall

be powder coated to dry film thickness of 40-60µ. There shall be PPCP shoe

provided at bottom to avoid scratches on the floor.

Make-Geeken Model-GC 9032

Reading Chair

Providing and supplying visitor chair without arm. The seat shall be made of

double layered (12+6)mm thick hot pressed plywood upholstered with high

resilience polyurethane foam 40mm thick having density 40kg/m³ with fabric

tapestry 0.6mm thick and 235 GSM and the back shall be made of 12mm thick

hot pressed plywood upholstered with high resilience polyurethane foam

12mm thick having density 23kg/m³ with fabric tapestry 0.6mm thick and 235

GSM. The frame structure shall be fixed cantilever support type made up of

233 3 MS/CRCA chrome plated round pipe of Dia. 15.8mm with 2mm thick. There Nos 140.00 7316 0.00 10,24,240.00

shall be PPCP shoe provided at the base to avoid scratches on the floor. The

seat size shall be 500±10 mm(D) X 460±10 mm(W) and back size shall be 435±10

mm(W) X 380±10 mm(H) from seat.

Overall height shall be = 825±10 mm, overall depth = 640±10 mm. Make-

Geeken

Model-GV 625

Providing, supplying and placing double side steel Library Racks in perfectly

upright and straight position. The overall size of the rack shall be 940mm (W) X

600mm (D) X 2110mm (H). The rack shall be supplied with 4 nos. of adjustable

shelves on both side i.e. 10 loading levels. Rack, side panel, skirting shall be

made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to

IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle

board of grade II of IS 12823. The edges of the board shall be sealed with 2mm

thick PVC edge banding. The add-on units can be stacked width wise to form a

bank of racks having common side panel. The shelves shall be folded

constructions which have intrinsic rigidity and high load carrying capacity.

Uniformly Distributed load capacity per each shelf shall be 80kg maximum. Each

shelf shall be provided with stiffener at bottom for strength and back stiffener

for separator between front and rear shelf. All steel components shall be epoxy

polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be

provided with metal insert to resist scratches on the floor and also level &

support structure.

Make-Geeken

RESEARCH ROOM & E-LIBRARY

Providing, supplying and placing workstation table shall be panel-based

partition type suitable for office use. Each seat size shall be 600 mm (W) × 600

mm (D) × 750 mm (H). The table top shall be made of high-density particle

board, minimum 25 mm thick, with a pre-laminated or laminated surface. All

exposed edges shall be finished with minimum 2 mm PVC edge banding using

hot-melt adhesive. The panel-based partition shall be made of minimum 18 mm

particle board, finished in laminate or fabric as specified. The structure shall be

sturdy, durable, and suitable for daily commercial usage.

Make-Geeken

Supplying and placing ergonomically designed, comfortable & aesthetically

appealing Medium back chair. The seat shall be made of 15mm thick hot

pressed curved plywood upholstered with high resilience moulded

polyurethane foam 50mm thick having density 50kg/m³ with black fabric

tapestry 0.6mm thick and 235 GSM and the back shall be supported by MS

CRCA metal pipe upholstered with breathable black mesh with cushion

contoured lumbar support which helps to provide full back support and

maintain the natural curvature of the spine. The seat and back shall be

individual with plywood & metal frame joint with HR steel sheet and the

armrest shall be used PP arm completely joint with seat. The chair shall have

synchro tilt 360 degree revolving mechanism with upright position locking and

tilt tension adjustment. The pneumatic seat height adjustment for healthy

236 6 seating, user can adjust seat height upto 80mm with BIFMA standard class-3 Nos 33.00 11210 0.00 3,69,930.00

gaslift to suit them using the lever under the seat. The gas-lift mechanism

should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be

made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with

5 nos. 50mm twin wheel castors which shall be made of injection moulded

black nylon 30% glass filled having self lubricating property for friction free

movemen with BIFMA standards. The Seat size shall be 460±10 mm(W)X475±10

mm(D) and back size shall be 570±10 mm(H) from seat & overall height =

Make-Geeken Model-GA 516 C

Providing, supplying and placing Overall Dimensions of All Steel Periodical

Display Rack shall be 900mm(W)x450mm(D)x1850mm(H). Rigid Knockdown

construction ,Panels shall be made from CRCA 0.8 mm thick and front frame

shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 . There shall

be 5 level racks , Display tray shall be suitable for fullscape size

magazines,periodicals, aesthetically appealing metal tray at an angle for easy

viewing . Receding facility to access the storage behind . Sliding on plastic rollers

237 7 . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Nos 19.00 26550 0.00 5,04,450.00

Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type

with hex plastic base and finish shall be epoxy polyester powder coated to the

thickness of 50 microns .

Make-Geeken Model- GMS 62

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

LIBRARIAN ROOM

Supplying & Placing executive table in completely knock down conditions with

an overall size 1600mm X 1600mm X 750mm that is to be assembled at site. The

worktop shall be made up of 25mm thick Pre-laminated particle board of

grade II of IS 12823 with approved laminate and finish as per approved shade.

The profile shall be in rectangle shape and the edges shall be sealed with

2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200

degree Celsius. The top shall be supported on MS powder coated rectangle

pipe frame having cross-section area 40mm X 20mm. The table shall be clad

with 1mm thick modesty panel which provide structural support for the table.

It should be 1mm thick with star perforation CRCA powder coated sheet in

linear shape. The understructure shall consist of loop leg and C leg made up of

MS powder coated triangular shape pipe having cross-section area 53mm X

53mm X 75mm. There shall be shoe provided to avoid scratches on the floor.

Side top shall be provided with an overall size 800mm X 500mm X 750mm

238 8 made up of 25mm thick Pre-laminated particle board of grade II of IS 12823. It Nos 1.00 53041 0.00 53,041.00

shall be supported on peg which is mounted over side storage unit. The side

storage having an overall size 1400mm X 570mm X 500mm. It should be made

up of particle board with drawer base 9mm thick and other parts 18mm thick

like shutter, back, facia, side panel etc. It shall have 2 box drawer, 1 filing

drawer and 1 door shutter. The drawer shall be operated with roller channel

and ball bearing channel to enable smooth operation. The drawer shall have

central locking mechanism in which all the drawer shall be synchronized locked

with one single key. The shutter shall be operated by handle and concealed

crank hinge. Side storage unit shall be mounted on CRCA powder coated U

shape leg having cross-section area 53mm X 53mm x 75mm. The manufacturer

shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015

and ISO-18001:2007, BIFMA membership and AIOTA certification. The board

used should meet International Standard of quality, Indian standard IS 12823

grade II should meet long time load bending, screw-withdrawal strength,

modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Make-Geeken

Model- CLASSIC 9

Providing and supplying high back chair with ergonomic design. The seat shall

be made of 15mm thick hot pressed commercial plywood upholstered with high

resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with

fabric tapestry and the back shall be made of two piece injection moulded

polypropylene net cover upholstered with breathable mesh tapestry. The base

of the seat shall be supplied with PP cover and the backrest shall be made by

keeping the natural curvature of the spine and cushion base adjustable lumbar

support which helps to provide full back support as well as head support. The

chair shall be supplied with black integral 3D adjustable polyurethane arm

having sliding, up-down, to & fro motion. For seating durability the chair shall

have synchro tilt 360 degree revolving mechanism with upright position locking

and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with BIFMA standard class-3

gas-lift to suit them using the lever under the seat. The gas-lift mechanism

239 9 should be tested as per ANSI/BIFMA X5.1-2011 standards. Nos 1.00 18290 0.00 18,290.00

The pedestal should have five legged injection moulded in 30% glass filled nylon

having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon,

confirming to ANSI/BIFMA standards X5.1-2011 tested 98,000 cycles with

250lbs load. The seat size shall be 500±10 mm(D) X 500±10 mm(W) and back

size shall be 450±10 mm(W) X 760±10 mm(H) from seat. Overall height shall be

= 1190±10 mm, base width/ depth = 760±10 mm.

Make-Geeken

Providing and supplying a medium back chair with ergonomic design,

comfortable & aesthetically appealing. The seat shall be made of 15mm thick

hot pressed commercial plywood upholstered with high resilience moulded

polyurethane foam 50mm thick having density 40kg/m³ with fabric tapestry and

the back shall be made of polypropylene net cover upholstered with breathable

mesh tapestry. The backrest shall be made by keeping the natural curvature of

the spine and cushion base adjustable lumbar support which helps to provide

full back support. The chair shall be supplied with black integral adjustable

polyurethane arm.

For seating durability the chair shall have synchro tilt 360 degree revolving

mechanism with upright position locking and tilt tension adjustment. The

pneumatic seat height adjustment for healthy seating, user can adjust seat

height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the

240 10 lever under the seat. The gas-lift mechanism should be tested as per Nos 2.00 15930 0.00 31,860.00

ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged

injection moulded in 30% glass filled nylon having pitch circle dia. 660 mm fitted

with 5 nos. twin wheel castors. The castors of the chair should be injection

moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards

X5.1-2011 tested 98,000 cycles with 250lbs load. The seat size shall be 500±10

mm(D) X 500±10 mm(W) and back size shall be 450±10 mm(W) X 530±10

mm(H) from seat. Overall height shall be = 960±10 mm & overall width/depth =

Make-Geeken Model-EDGE 2

Providing, supplying and placing workstation table shall be panel-based

partition type suitable for office use. Each seat size shall be 600 mm (W) × 600

mm (D) × 750 mm (H). The table top shall be made of high-density particle

board, minimum 25 mm thick, with a pre-laminated or laminated surface. All

exposed edges shall be finished with minimum 2 mm PVC edge banding using

241 11 hot-melt adhesive. The panel-based partition shall be made of minimum 18 mm Nos 3.00 24190 0.00 72,570.00

particle board, finished in laminate or fabric as specified. The structure shall be

sturdy, durable, and suitable for daily commercial usage.

Make-Geeken

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying and placing ergonomically designed, comfortable & aesthetically

appealing Medium back chair. The seat shall be made of 15mm thick hot

pressed curved plywood upholstered with high resilience moulded

polyurethane foam 50mm thick having density 50kg/m³ with black fabric

tapestry 0.6mm thick and 235 GSM and the back shall be supported by MS

CRCA metal pipe upholstered with breathable black mesh with cushion

contoured lumbar support which helps to provide full back support and

maintain the natural curvature of the spine. The seat and back shall be

individual with plywood & metal frame joint with HR steel sheet and the

armrest shall be used PP arm completely joint with seat. The chair shall have

synchro tilt 360 degree revolving mechanism with upright position locking and

tilt tension adjustment. The pneumatic seat height adjustment for healthy

242 12 seating, user can adjust seat height upto 80mm with BIFMA standard class-3 Nos 3.00 11210 0.00 33,630.00

gaslift to suit them using the lever under the seat. The gas-lift mechanism

should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be

made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with

5 nos. 50mm twin wheel castors which shall be made of injection moulded

black nylon 30% glass filled having self lubricating property for friction free

movemen with BIFMA standards. The Seat size shall be 460±10 mm(W)X475±10

mm(D) and back size shall be 570±10 mm(H) from seat & overall height =

Make-Geeken Model-GA 516 C

Providing, supplying and placing steel almirah in perfectly upright and straight

position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X

1980mm (H) including legs. It should be supplied with 4 nos. of adjustable

shelves i.e. 5 loading compartments. All components shall be made of 0.8mm

thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners

shall be provided in shelf & door. The steel hinged door shall be provided with

locking mechanism which is assembled with bolt arrangement. The shelves shall

have folded constructions which have intrinsic rigidity and high load carrying

capacity. Uniformly distributed load capacity per each shelf shall be 40kg

maximum. The complete steel structure shall be constructed by welding and

provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

Make-Geeken

Model-GMS 41

SAFF ROOM

Supplying & Placing Modular table in completely knock down conditions with

an overall size 1650mm X 1650mm X 750mm that is to be assembled at site. The

construction of the main table shall be free standing structure constructed with

the help of minifix dowels and pins. The work top shall have the size 1650mm X

750mm made up of 25mm thick particle board of grade II of IS 12823 with

approved laminate and finish as per approved shade. The table top profile shall

be in rectangle shape with front and back full round post form and other edges

shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit

the size of board panel and duly pasted with the assistance of edge banding

machine at 200 degree Celsius. The table top shall be supported over particle

board base gable end. The end wall of the table on the side shall be topped by

gable end. The gable end shall be made up of 25mm thick particle board and

profile shall be in linear shape with front and back full round post form and

other edge with appropriate PVC edge banding. The table shall be clad with

18mm thick modesty panel which provide structural support for the table. It

244 14 should be 18mm thick pre-laminated particle board with appropriate PVC edge Nos 3.00 44250 0.00 1,32,750.00

banding connected with both end. There shall be buffers provided at the base

to avoid scratches on the floor. The table shall be supplied with side unit for

storage purpose with an overall size 900mm X 450mm X 750mm. The side

unit shall be made up of Pre-laminated particle board of grade II of IS 12823

with top 25mm thick and other parts 18mm thick like shutter, back, side panel

etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter

shall be operated with the assistance of SS handle and Multi-purpose (MP)

locking mechanism. To protect the wall from kicks, abrasion and serve as a

decorative moulding, skirting shall be provided at bottom. A mobile pedestal

shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal

shall be made up of Pre-laminated particle board of grade II of IS 12823.

Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be

9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1

filing drawer. The drawer shall be operated with SS handle and easily close &

open with the assistance of roller channel and ball bearing channel having to

enable smooth operation. The drawer shall have central locking mechanism in

which all the drawer shall be synchronized locked with one single key. The

Providing and supplying high back chair with ergonomic design. The seat shall

be made of 15mm thick hot pressed commercial plywood upholstered with high

resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with

fabric tapestry and the back shall be made of two piece injection moulded

polypropylene net cover upholstered with breathable mesh tapestry. The base

of the seat shall be supplied with PP cover and the backrest shall be made by

keeping the natural curvature of the spine and cushion base adjustable lumbar

support which helps to provide full back support as well as head support. The

chair shall be supplied with black integral 3D adjustable polyurethane arm

having sliding, up-down, to & fro motion. For seating durability the chair shall

have synchro tilt 360 degree revolving mechanism with upright position locking

and tilt tension adjustment. The pneumatic seat height adjustment for healthy

seating, user can adjust seat height up to 100mm with BIFMA standard class-3

245 15 gas-lift to suit them using the lever under the seat. The gas-lift mechanism Nos 3.00 18290 0.00 54,870.00

should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should

have five legged injection moulded in 30% glass filled nylon having pitch circle

dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair

should be injection moulded in black 30% glass filled nylon, confirming to

ANSI/BIFMA standards X5.1-2011 tested 98,000 cycles with 250lbs load. The

seat size shall be 500±10 mm(D) X 500±10 mm(W) and back size shall be

450±10 mm(W) X 760±10 mm(H) from seat. Overall height shall be = 1190±10

mm, base width/ depth = 760±10 mm.

Make-Geeken Model-EDGE 1

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Providing and supplying a medium back chair with ergonomic design,

comfortable & aesthetically appealing. The seat shall be made of 15mm thick

hot pressed commercial plywood upholstered with high resilience moulded

polyurethane foam 50mm thick having density 40kg/m³ with fabric tapestry and

the back shall be made of polypropylene net cover upholstered with breathable

mesh tapestry. The backrest shall be made by keeping the natural curvature of

the spine and cushion base adjustable lumbar support which helps to provide

full back support. The chair shall be supplied with black integral adjustable

polyurethane arm.

For seating durability the chair shall have synchro tilt 360 degree revolving

mechanism with upright position locking and tilt tension adjustment. The

pneumatic seat height adjustment for healthy seating, user can adjust seat

height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the

246 16 lever under the seat. The gas-lift mechanism should be tested as per Nos 6.00 15930 0.00 95,580.00

ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged

injection moulded in 30% glass filled nylon having pitch circle dia. 660 mm fitted

with 5 nos. twin wheel castors. The castors of the chair should be injection

moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards

X5.1-2011 tested 98,000 cycles with 250lbs load. The seat size shall be 500±10

mm(D) X 500±10 mm(W) and back size shall be 450±10 mm(W) X 530±10

mm(H) from seat. Overall height shall be = 960±10 mm & overall width/depth =

Make-Geeken Model-EDGE 2

Providing, supplying and placing steel almirah in perfectly upright and straight

position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X

1980mm (H) including legs. It should be supplied with 4 nos. of adjustable

shelves i.e. 5 loading compartments. All components shall be made of 0.8mm

thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners

shall be provided in shelf & door. The steel hinged door shall be provided with

locking mechanism which is assembled with bolt arrangement. The shelves shall

have folded constructions which have intrinsic rigidity and high load carrying

capacity. Uniformly distributed load capacity per each shelf shall be 40kg

maximum. The complete steel structure shall be constructed by welding and

provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

Make-Geeken

Model-GMS 41

FIRST FLOOR

(LIBRARY BLOCK)

Supplying & Placing 8 seater table with an overall size 1800mm X 900mm X

750mm. The top shall be made up of 25mm thick Pre-laminated particle board

of grade II of IS 12823 with approved laminate and finish as per approved

shade. The profile shall be in rectangle shape and the edges shall be sealed with

2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200

degree Celsius. The top shall be supported on MS/CRCA rectangle pipe frame

248 18 having cross-section area 70mm X 20mm with 1.6mm thick. The understructure Nos 30.00 17700 0.00 5,31,000.00

shall consist of four legs made up of MS round pipe having dia. 38.1mm with

1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall

be powder coated to dry film thickness of 40-60µ. There shall be PPCP shoe

provided at bottom to avoid scratches on the floor.

Make-Geeken

Model-GC 9032

Reading Chair

Providing and supplying visitor chair without arm. The seat shall be made of

double layered (12+6)mm thick hot pressed plywood upholstered with high

resilience polyurethane foam 40mm thick having density 40kg/m³ with fabric

tapestry 0.6mm thick and 235 GSM and the back shall be made of 12mm thick

hot pressed plywood upholstered with high resilience polyurethane foam

12mm thick having density 23kg/m³ with fabric tapestry 0.6mm thick and 235

GSM. The frame structure shall be fixed cantilever support type made up of

MS/CRCA chrome plated round pipe of Dia. 15.8mm with 2mm thick. There

shall be PPCP shoe provided at the base to avoid scratches on the floor. The

seat size shall be 500±10 mm(D) X 460±10 mm(W) and back size shall be

435±10 mm(W) X 380±10 mm(H) from seat. Overall height shall be = 825±10

mm, overall depth = 640±10 mm.

Make-Geeken Model-GV 625

Providing, supplying and placing double side steel Library Racks in perfectly

upright and straight position. The overall size of the rack shall be 940mm (W) X

600mm (D) X 2110mm (H). The rack shall be supplied with 4 nos. of adjustable

shelves on both side i.e. 10 loading levels. Rack, side panel, skirting shall be

made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to

IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle

board of grade II of IS 12823. The edges of the board shall be sealed with 2mm

thick PVC edge banding. The add-on units can be stacked width wise to form a

bank of racks having common side panel. The shelves shall be folded

constructions which have intrinsic rigidity and high load carrying capacity.

250 20 Uniformly Distributed load capacity per each shelf shall be 80kg maximum. Each Nos 69.00 38,350.00 0.00 26,46,150.00

shelf shall be provided with stiffener at bottom for strength and back stiffener

for separator between front and rear shelf. All steel components shall be epoxy

polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be

provided with metal insert to resist scratches on the floor and also level &

support structure.

Make-Geeken

Model-GMS 17

251 Sub-Total of Civil Works 6,09,42,437.06 1,78,75,343.70

252 Plumbing Works 0.00 0.00

253 A Internal Sanitary & Plumbing System 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying all materials, labour, T& providing and fixing of UPVC

ASTM-D pipes for external water supply for individual floor &

from OHT to toilet conforming to IS:15778, having thermal

stability for hot & cold water supply, including all UPVC plain &

brass threaded fittings including fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with

one step UPVC solvent cement including making good the wall,

ceiling and floor all complete as per specification and direction

of the Engineer in charge.

(Astral/Finolex/Industries/AKG/Supreme/Ashirbad)

In Ground Floor -

20mm dia U-PVC pipe

255 3 25mm dia U-PVC pipe Mtr 30.00 397.424 11,922.72 0.00

In First Floor -

20mm dia U-PVC pipe

5 25mm dia U-PVC pipe Mtr 30.00 397.424 11,922.72 0.00

In Terrace Floor-

32mm dia U-PVC pipe

7 40mm dia U-PVC pipe Mtr 40.00 933.144 37,325.76 0.00

Supplying all materials , labour, T&P and providing and fixing to

wall or ceiling and floor PVC pipes conforming to C-PVC1785/89

( Sch-80 ) and G.I pipe fittings of the following nominal bore

with clamps including making good the wall,ceiling and floor

,testing all complete as per P.H. specification and direction of

Engineer-in-charge .

(Astral/Finolex/Industries/AKG/Supreme/Ashirbad)

In Ground Floor -

20mm dia C-PVC pipe

9 25mm dia C-PVC pipe Mtr 35.00 453.474 15,871.59 0.00

In First Floor -

20mm dia C-PVC pipe

11 25mm dia C-PVC pipe Mtr 35.00 453.474 15,871.59 0.00

In Terrace Floor-

32mm dia C-PVC pipe

13 40mm dia C-PVC pipe Mtr 60.00 1345.908 80,754.48 0.00

Supplying all materials, labour, T&P and fitting and fixing PVC

SWR soil waste ventilating pipes and fittings of the following

outside diameter conforming to ISI No. 13592/1992 to walls

with nails, bobbins and wooden plugs or laying in trenches

including jointing with supply of approved rubber lubricant by

14 non-heat application method/as per manufacturer’s Mtr 90.00 399.902 35,991.18 0.00

specification, testing, earthwork in excavation in all kinds of soil

and refilling of trenches as per specification and direction of the

Engineer in charge.

(Astral/Finolex/Industries/AKG/Supreme/Ashirbad)

75mm SWR pipes

15 75mm PVC plain bend Each 14.00 217.12 3,039.68 0.00

16 75mm PVC socket plain Each 15.00 95.934 1,439.01 0.00

17 110mm SWR pipes Mtr 120.00 582.33 69,879.60 0.00

18 110mm PVC 'P' trap Each 8.00 586.814 4,694.51 0.00

19 110mm PVC socket plain Each 12.00 188.918 2,267.02 0.00

20 110mm PVC plain bend Each 8.00 273.76 2,190.08 0.00

21 110mm PVC door bend Each 10.00 346.448 3,464.48 0.00

22 110mm PVC door Tee Each 6.00 455.48 2,732.88 0.00

23 110mm PVC plain Tee Each 12.00 380.786 4,569.43 0.00

24 110mm PVC door cross Tee Each 8.00 650.416 5,203.33 0.00

25 110mm dia U-PVC Offset without ear Each 8.00 480.732 3,845.86 0.00

26 110mm PVC vent cowl Each 10.00 68.676 686.76 0.00

27 110mm PVC Clamp Each 40.00 50.504 2,020.16 0.00

Supply,Providing, fixing, testing and commissioning in position

UV stabilised 75 mm dia PVC Rain water pipe with Fittings (IS:

13592 Type - B). In case of ceiling hanging, the supply of Pipe

29 Clamps (Chilly/MS angle) as per engineer in charge.110 mm Mtr 40.00 518.61 20,744.40 0.00

diameter. (Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)

75 mm dia PVC (IS:13592, Type -B)

Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating

for Rain water pipes 110 mm dia.

31 150 mm x 150 mm.dia CI Grating (Kohler/Grohe/Jaguar) Each 4.00 110.566 442.26 0.00

Matrix Set -1 (WB 65 x 35 with one pair mounting brackets,

32 EWC & Cistern complete with fittings & seat cover, one no Each 2.00 78575.492 0.00 1,57,150.98

hinged rail 76 cm and five nos of grab rails 60 cm) (head)70002

Supplying all materials,labour,T&P and fitting and fixing vitrous

Chaina washed down water Closet (European type water closet -

EWC) with integral "P" or "S" type trap to the floor including

wodden plug and chromoum plated screw including jointing the

trap with soil pipe in CM(1:1) fixing plastic seat cover for

washed down water closet with crmium plated brass hinges and

rubber buffers including polishing etc all complete as per

specification and direction of Engineer-in-charge.

European Water Clost "S" trap (Parryware/ Hindware/ Somany/

Supplying all materials, labour, T&P and fitting and fixing 10

litres capacity low level flushing cistern with a pair of cast iron or

M.S brackets complete with fittings such as siphonic

arrangements 15mm nominal size brass/pvc ball valve with

polythene float CP brass handle, unions and couplings for

connection with inlet, outlet and overflow pipes,32mm dia CP

flush bend,15mm dia pvc inlet connection pipe including cutting

holes and making good the same and connecting the flush bend

with cistern and closet and connecting the inlet pipe with supply

main etc all complete as per specification and direction of the

Engineer in charge.

10 litres PVC L.L. Cistern with flush bend .

10 litres PVC L.L. Cistern with flush bend .

(Kohler/Grohe/Roca/Jaguar)

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying all materials ,labour ,T&P and fixing Wash basin with

hole for pillar taps with cast iron or MS brackets painted white

including cutting holes in walls and making good the damages

with supply of wooden plugs, screws and cement etc. fixing

pedestral for wash basin recessed at the back for the reception

of pipes and fittings, fixing PVC waste pipe of 32mm nominal

diameter for wash basin including brass check nut complete,

36 fixing pillar taps capstan head screw down high pressure 0 0.00 0.00

lettered 'Hot' and 'Cold' with long screws, shanks and back nuts

of 15mm dia nominal bore, fixing15mm dia PVC inlet connection

pipe and making connection with pillar cocks and supply mains

for wash basin , fixing 12mm dia CP brass waste etc.all

complete as per specification and direction of Engineer-in-

charge. (Kohler/Grohe/Roca/Jaguar)

37 Under Counter Basin (560x455) (H)10095 white Each 8.00 4564.712 36,517.70 0.00

32mm dia PVC waste pipe with brass coupling nut

(Astral/Finolex/Industries/AKG/Supreme/Ashirbad)

15mm dia PVC inlet connection pipe 0.45m long

(Astral/Finolex/Industries/AKG/Supreme/Ashirbad)

Supplying all materials, labour, T&P and fixing bowl pattern

urinal conforming to IS:771-part-3-1985 of the following sizes

including connecting the urinal with 32mm dia pvc waste pipe

910mm long by means of white lead mixed with chopped hemp,

fixing 32mm dia CP dome waste, 15mm dia CP spreader

40 including cutting holes in walls and making good the damages Each 6.00 9059.686 54,358.12 0.00

with supply of wooden plugs, screws and cement etc all

complete as per specification and direction of the Engineer in

charge. Half stall urinal (Jaquar/Parryware / Hindware make).

URS-WHT-13253N Urinal (Back Inlet)

41 32mm dia C.P. dome waste Each 6.00 151.63 909.78 0.00

42 32mm dia PVC waste pipe with brass coupling nut Each 6.00 59.59 357.54 0.00

43 15mm dia PVC inlet connection pipe 0.45m long Each 6.00 40.12 240.72 0.00

Supplying all materials, labour, T&P, fitting and fixing brass/CP

fittings of the following nominal bore with supply of all jointing

44 materials complete as per specification and direction of the EIC. 0.00 0.00

(Kohler/Grohe/Jaguar)

45 15mm dia CP 2way bib cock Each 10.00 2526.262 25,262.62 0.00

46 15mm dia CP Health faucet Each 10.00 1480.9 14,809.00 0.00

47 15mm dia CP Angle stop cock Each 29.00 1393.816 40,420.66 0.00

48 15mm dia CP Pillar cock Each 8.00 2032.668 16,261.34 0.00

49 15mm dia CP extension piece Each 57.00 69.974 3,988.52 0.00

50 PVC Connection Pipe Each 18.00 40.12 722.16 0.00

51 PVC Discharge Pipe Each 18.00 59.59 1,072.62 0.00

52 15mm dia. C.P flange Each 47.00 47.554 2,235.04 0.00

53 125mm dia CP gratting Each 25.00 110.566 2,764.15 0.00

Supplying all materials,labour,T&P and fixing standard sized

Glass-shelf, Towel Rail, Towel Ring, Soap Holder, Soap

dispenser with C.P brass bracket and guard rail complete fixed

to wooden pluges with screw etc.all complete as per

specification and direction of Engineer-in-charge.

600mmx125mm size glass shelf with C.P guard Rail. Each 6.00 791.19

55 C P Towel Ring (Kohler/Grohe/Jaguar) Each 8.00 607.11 4,856.88 0.00

C P Soap Dispenser.Euronics/Bobric/

Sloan/Prestge/Nirali) Each 8.00 2584.318

57 C P Toilet Roll Holder. (Kohler/Grohe/Jaguar) Each 12.00 1445.5 17,346.00 0.00

Supplying all materials, labour, T&P and fixing of Stainless Steel

Coat Hook alongwith all necessary accessories complete

including cutting, making good the walls, floors, slab wherever

complete in all respect as per specification and direction of the

Engineer in charge.(Kohler/Grohe/Jaguar)

Stainless Steel Coat Hook Each 10.00 987.306

Supplying all materials ,labour ,T&P and fixing Mirror of

superior glass mounted on 6mm thick A.C. sheet or ply wood

sheet and fixed to wooden plugs with chromium plated brass

screws and washers etc.all complete as per specification and

direction of Engineer-in-charge.

Single Mirror (Bevelled edge) 750mmx450mm Each 8.00 896.092

Supplying all materials, labour, T&P and fitting and fixing G.M/

Brass fittings of the following nominal bore with supply of all

jointing materials complete as per specification and direction of

the Engineer in charge.

(Zoloto/Advance/CRI/Sant/Kartar)

25mm dia Brass F.W valve Each 4.00 1113.212

61 32mm dia Brass F.W valve Each 4.00 1630.406 6,521.62 0.00

62 32mm dia CPVC Ball valve Each 5.00 1354.758 6,773.79 0.00

Supplying all materials, labour, T&P and providing fitting and

fixing Aquaguard PRO Thermapure 120 PSS RO ACH which gives

you Hot,Cold & Ambient purified water.Aquaguard PEO

Thermapure 120 PSS RO has built-in-3 stage combinations,Tank

Capacity 120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient

water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-HFC

R134a,Cold water temperature-15 Deg.C+/-1*,Heating coil

63 wattage-2000W,Hot water temperature-50 Deg C+/-1,Thermal 0.00 3,09,787.76

insulation-PUF,No of Faucets-1 Hot,1 Cold,1 Ambient,Tank,front

panel and drain tray MOC-SS304,Other body panels-Powder

coated CRCA Steel,No of filtration stages-7,RO Capacity-50

LPH*,RORecovery%-50%*,TDS Reject-90%*, Dimentions

(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as

per direction of the Engineer-in-charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying all materials,labour,T&P and fixing Rotational

moulded polyethylene cylindrical vertical water storage tanks

conforming to IS : 12701--1996 including cutting holes through

the tank and fixing mild steel tubes and fittings and providing

extra sockets and jam nuts, fixing ball valve etc, including

hoisting upto a height of 5 metres above ground level and

placing the tank to the required position and providing 1st class

K.B brickwork in cement mortar (1:6) of 0.46m height in staging

and in circular protection wall to support the tank, 12mm thick

64 cement plaster (1:6) over brickwork, R.C.C slab of size 2,71,620.66 0.00

1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m

and 2.60m average length in cement concrete(1:2:4) using

12mm size h.g chips including centering and shuttering,

watering, curing, conveyance of all materials to worksite etc all

complete as per specification and direction of the Engineer in

charge.

(Supreme/Finolex/Industries/Astral/AKG/Syntex)

Fixing 5000Ltr Roto-moulded water storage tanks-In Terrace

floor Each 3.00 90540.22

B External Supply & Drainage portion 0 0.00 0.00

Supplying all materials, labour, T&P and constructing gully trap

chamber of the following inside size with 8cm thick R.C.C

precast cover slab in cement concrete (1:2:4) mix using 12mm

size h.g chips, foundation concrete (1:4:8) using 40mm size

hard granite metal on bed and around trap, KB brickwork in

cement mortar (1:6) in F&P and inside 12mm thick cement

plastering (1:3) finished with a floating coat of neat cement

including fixing 100mmx100mm size HCI gully

trap,150mmx150mm size CI grating etc all complete as per

approved drawing, specification and direction of the Engineer in

charge.

Inside size 250mmx250mm Each 4.00 2183.354

Supplying all materials, labour, T&P and constructing inspection

chamber of the following size with cement concrete(1:3:6)

using 40mm size hard granite metal on bed, 1st class fly ash

brickwork in cement mortar(1:6), moulding and shaping the

channel inside and benching with cement concrete (1:2:4) using

12mm size h.g chips, 12mmthick cement plaster (1:3) with

66 punning to inside, cement flush pointing (1:3) to outside, RCC 52,794.15 0.00

cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC

man hole cover, earthwork in excavation in all kinds of soil and

refilling the cavity around the chamber including watering,

curing, conveyance of all materials to worksite, payment of

royalty, taxes etc all complete as per approved specification and

direction of the Engineer in charge. Inside size

760mmx760mmx460mm Each 4.00 13198.54

67 R.C.P.C Cover Each 4.00 1289.858 5,159.43 0.00

Supplying all materials, labour, T&P and laying in trenches (to

level or slope) unplasticized PVC pipes conforming to IS:

4985/2000 of the following outside dia for class–3(0.60mpa)

including jointing with supply of approved solvent cement by

non-heat application method/as per manufacturer’s

68 specification, providing and laying in trench cement concrete 32,504.28 0.00

(1:4:8) with 40mm size hard granite metal in the Type C-1

standard bedding surrounding or encasing including concrete

for bedding and curing etc all complete as per PH specification

and direction of the Engineer in charge.

110mm dia U-PVC Alround Concrete Mtr 20.00 1625.214

69 160mm dia U-PVC Alround Concrete Mtr 60.00 2617.122 1,57,027.32 0.00

Construction of 10000 Litr.Capacity RCC Over head water

storage tank (Fire fighting Water) 0

R.C.C. work of M-20 grade with 20mm and down grade black

hard black crusher broken granite stone chips of approved

quality from approved quarry including hoisting, lowering, laying

and compacting concrete, watering curing, centering, shuttering

and finishing the exposed surfaces smooth with cost,

conveyance, royalties, taxes of all materials with all

70 labour,labour cess and T & P required for the work etc. complete 0.00 0.00

in all respect but excluding the cost and conveyance of M.S.

rods or Tor steel and binding wire of 18 to 20 gauge and labour

charges for straightening, cutting, bending, binding and tying

the grills and placing in proper position and as per spection and

the direction of the Engineer-in-charge.

71 In Terrace floor 0 0.00 0.00

72 RCC in Column Cum 0.74 42477.404 31,348.32 0.00

73 RCC in beam Cum 1.55 50962.784 79,196.17 0.00

74 RCC in Base slab Cum 2.59 35373.568 91,688.29 0.00

75 RCC in Roof slab Cum 2.18 35373.568 77,255.87 0.00

76 RCC Wall Sqm 3.85 38812.088 1,49,348.91 0.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or

tor steel of primary steel producers such as SAIL / TATA / RINL /

JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including

bending, binding, welding and jointing if necessary and tying the

grills and placing in position as required for R.C.C. Work and for

providing fan hooks as required, hoisting, lowering, laying

77 including cost, conveyances of M.S. Rod or tor steel and binding 0.00 0.00

wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess

etc. (payment will be made on standard weight of B.I.S. for

M.S. Rods or tor steel only) etc. complete as per specification &

direction of Engineer-in-charge.

78 In Terrace floor Qntl 16.37 10207.5546 1,67,138.50 0.00

Providing 6 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to R.C.C. work after closed deep chipping &

slurry treatment including watering and curing, rounding of

corners, providing grooves where ever necessary with cost,

conveyance and royalties of all materials with cost of all labour,

T&P, and scaffolding required for the work etc. complete in all

respect as directed by the Engineer in charge. 0

80 In Terrace floor Sqm 46.20 257.004 11,873.58 0.00

Supplying all materials, labour, T&P and providing cement

81 punning including watering, curring and conveyance of all 2,240.61 0.00

materials to site. Sqm 46.20 48.498

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Priming one coat with wall cement primer (water bound) to

make an even finished surface in all floors and heights to wall

surface of approved make and shade including sand papering,

82 applying putty wherever necessary & cost of scaffolding, staging 4,612.05 0.00

charges with cost, conveyance, cost of all labour,labour cess T&P

etc. complete as per the direction of the Engineer-in-charge.

Finishing plastered surfaces of walls with cement based wall

putty (Water based) of approved make and finishing the surface

smooth and even by sand papering to receive painting in walls,

83 at all heights with staging wherever necessary with cost, 4,966.41 0.00

conveyance, all materials, cost of all labour,labourcess, all T&P

etc. required for the work complete in all respect as per the

direction of the Engineer-in-charge. Sqm 46.20 107.498

Supplying and fitting and fixing stainless steel 34 grade in said

rail using 5mm dia 2mm thick circular pipe and balustrade

32mmx32mmx2mm at the rate of mtr.Center to center and

84 square pipe 32x32x2mm below including welding with stanless 40,497.60 0.00

steel elect rod and fixing with necessary accessories

etc.complete as per direction of the Engineer-in-charge.

Providing fitting and fixing MS cover made out of MS angle and

sheet duly welding and fixing with frame and hinges along with

85 locking arrangement of size 60cmx60cm etc complete as per 4,663.36 0.00

direction of Engineer-in-charge

Wall painting two coats with Weather coat paint (1st quality)

exterior grade of approved make & with a approved quality

primer to make an even finished surface in all floors and

86 heights with all scaffolding and staging charges including cost, 0.00 0.00

conveyance, cost of all labours, T & P, sundries etc. as required

for the work complete in all respect as per the direction of the

Engineer-in-Charge. 0

87 In Terrace floor Sqm 46.20 123.428 5,702.37 0.00

Construction of 6.75mx3.60m x 1.40m(h) Rain water

Recharge Pit- 1 Nos. 0

88 Sinking of tube well through D.T.H.Rig. 0 0.00 0.00

89 200mm dia- 0.0m to 30.00m Mtr. 25.00 923.468 23,086.70 0.00

90 Lowering of PVC casing pipe inside bore. 0 0.00 0.00

91 200mm dia- 0.0m to 30.00m Mtr. 25.00 212.99 5,324.75 0.00

92 Cost.of 200mm dia (Sch.80)Pipe Mtr. 25.00 2095.208 52,380.20 0.00

93 Cutting slot in casing pipe for recharge of rain water Mtr. 25.00 417.13 10,428.25 0.00

94 Labour for packing gravel outside the tube well 0 0.00 0.00

95 1x25.0mx22/28{(0.40)²-(0.20)²}=2.35 Cum 2.35 366.98 862.40 0.00

96 Cost of washed gravel. Cum 2.35 2033.73 4,779.27 0.00

Earth work in all kinds of soil within 50 mtr initial lead and

1.5mtr initial lift including rough dressing and breaking clods to

97 maximum 5cm to 7cm and laying in layers not exceeding 0.3 0.00 0.00

mtr in depth and as per direction of the Engineer in charge.

90 1x8.55x3.90x2.0 = 66.69 Cum 66.69 326.7302 21,789.64 0.00

Supplying all materials, labour, T&P and providing cement

concrete (1:4:8) with 4cm size hard granite metal including

91 watering, curing, conveyance of all materials to worksite, 0.00 0.00

payment of royalty, taxes etc all complete as per specification

and direction of the Engineer in charge.

92 L.wall-1x2x7.80x0.40x0.10=0.62 0.62 0 0.00 0.00

93 S.Wall-1x2x2.35x0.40x0.10=0.19 0.19 0 0.00 0.00

94 Base-1x2.35x1.15x0.10=0.27 0.27 0 0.00 0.00

Supplying all materials, labour, T&P and providing brick work

with Fly ash bricks having crushing strength not less than

75kg/cm² with dimensional tolerance ± 8 percent in cement

96 mortar (1:6) including watering, curing, conveyance of all 0.00 0.00

materials to worksite, payment of royalty, taxes etc all complete

as per specification and direction of the Engineer in charge.

97 L.Wall-1x2x7.65x0.25x2.0m=7.65 7.65 0 0.00 0.00

90 S.Wall-1x3x2.50x0.25x2.0m=3.75 3.75 0 0.00 0.00

Supplying all materials, labour, T&P and providing 16mm thick

cement plaster (1:6) on brickwork including watering, curing,

92 conveyance of all materials to worksite, payment of royalty, 0.00 0.00

taxes etc all complete as per specification and direction of the

Engineer in charge.

93 Inside-1x2(7.15+2.50)x2.0m=38.6 38.60 0 0.00 0.00

96 Outside-1x2(7.65+3.0)x2.0m=42.6 42.60 0 0.00 0.00

Supplying all materials, labour, T&P and providing cement

punning including watering, curing, conveyance of all materials

90 to worksite, payment of royalty, taxes etc all complete as per 0.00 0.00

specification and direction of the Engineer in charge.

91 Inside-1x2(7.15+2.50)x2.0m=38.6 38.60 0 0.00 0.00

Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for R.C.C works including false

94 work and dismantling them after casting including conveyance 0.00 0.00

of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

charge.

95 Roof slab-1x0.90x2.50=2.25 2.25 0 0.00 0.00

Supplying all materials, labour, T&P and providing reinforced

cement concrete work of M-25 grade with 20mm and down

grade black hard granite crusher broken stone chips including

90 hoisting, laying, watering, curing, conveyance of all materials to 0.00 0.00

worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

91 1x1.40x3.00x0.10=0.42 Cum 0.42 8672.9174 3,642.63 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying all materials, labour, T&P and providing M.S

reinforcement for R.C.C work including cutting, bending,

binding, and tying the grills and placing in position including cost

92 of binding wire 18 to 20 gauge, conveyance of all materials to 3,470.57 0.00

worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

93 Providing and filling filter media 0 0.00 0.00

94 40mm size bolder-1x6.0x2.50x0.85=12.75 Cum 12.75 1669.11 21,281.15 0.00

95 20mm size washed gravel-1x6.0x2.50x0.40=6 Cum 6.00 2033.73 12,202.38 0.00

96 Course sand-1x6.0x2.50x0.30=4.50 Cum 4.50 687.35 3,093.08 0.00

Providing fitting and fixing M.S.grill, Jalli cover over the harvesty

pindi. Qntl. 2.00 9322

E Construction 1 Nos 10KLD RCC Septic Tank. 0 0.00 0.00

Earth work in excavation of foundation in all kinds of soil within

50m initial lead and 1.5m initial lift including rough dressing &

98 breaking clods to maximum 5cm to 7cm and laying in layers not 3,878.29 0.00

exceeding 0.3m in depth and as per direction of the Engineer-in-

Charge.

100 - do - with addl. Depth of 1.5 m Cum 4.75 357.8822 1,699.94 0.00

Supplying all materials,labour ,T&P and filling in foundation and

plinth with sand well watered and rammed including cost,

102 conveyance of all materials to work site ,payment of 0.00 0.00

royalty,taxes etc. all complete as per direction of the Engineer-

in -charge

103 In ground floor Cum 0.79 1103.418 871.70 0.00

Supplying all materials, labour, T&P and providing cement

concrete ( 1:4:8 ) with 4cm size crusher broken hard granite

105 metal including watering, curing, cost of all 0.00 0.00

materials,conveyance of all materials to work site with payment

of royalty, all taxes etc all complete as per P.W.D specification

and direction of Engineer-in-charge.

106 In ground floor Cum 0.79 8054.8806 6,363.36 0.00

Supplying all materials, labour, T&P and providing cement

concrete (1:1:5:3) with 12mm size hard broken granite chips

108 for R.C.C works including hoisting, laying, watering, curing, 50,126.13 0.00

conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the

Engineer in charge

Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for R.C.C works including false

116 work and dismantling them after casting including conveyance 0.00 0.00

of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

charge

117 For Roof slab sqm 5.36 899.278 4,820.13 0.00

118 For RCC wall sqm 41.42 1267.8392 52,513.90 0.00

Supplying all materials, labour, T&P and providing M.S

reinforcement for R.C.C work including cutting, bending,

binding, and tying the grills and placing in position including cost

119 of binding wire 18 to 20 gauge, conveyance of all materials to 46,776.12 0.00

worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge

In ground floor Qntl 4.58 10207.5546

Supplying all materials,labour,T&P and providing 6mm CP (1:4)

with cement punning on brick work including

120 watering,curing,cost of all materials, conveyance of all materials 6,234.67 0.00

to worksite,payment of royalty,all taxes etc.all complete as per

PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing,fitting and

fixing 100mm x 100mm x 100mm SW Tee in wall including

filling the recess with cement concrete (1:3:6) with 12mm size

121 h.g chips all complete including watering, curing, conveyance of 943.76 0.00

all materials to worksite, payment of royalty all complete as per

specification and direction of the Engineer in charge

110mm dia UPVC Tee Each 2.00 471.882

Supplying all materials, labour, T&P and making MS step iron in

20mm diameter MS steel bars and fixing into walls of man

122 hole/septic tank duly embedded in cement concrete (1:3:6) 1,614.83 0.00

complete as per specification and direction of the Engineer in

charge.

Supplying all materials, labour,T&P and providing Vent base in

cement concrete(1:2:4) with 12mm size hard broken granite

123 chips for R.C.C works including hoisting, laying, watering, 234.35 0.00

curing, conveyance of all materials to worksite, payment of

royalty, taxes etc all complete as per specification and direction

of the Engineer in charge.

Supplying all materials, labour, T&P and fitting and fixing UPVC

SWR soil waste ventilating pipes and fittings to walls with nails,

bobbins and wooden plugs or laying in trenches including

124 earthwork in excavation in all kinds of soil and refilling of 974.49 0.00

trenches as per specification and direction of the engineer in

charge.

125 110mm dia

110mm diameter

U-PVCU-PVC SWR pipe

Plain shoe bend 273.76 0.00

126 110mm dia U-PVC Cowl Each 1.00 68.676 68.68 0.00

Filling in foundation and plinth with excavated materials,

127 moorum including watering and ramming as directed by the 443.97 0.00

Engineer in charge cum 3.14 141.482

Supplying all materials, labour, T&P and constructing soakway

pit of the following size with dry brick walling from bottom upto

invert of inlet pipe and fly ash brickwork in cement mortar (1:6)

for the remaining height at top, cement concrete (1:4:8) using

40mm size hg chips on bed, 12mm thick cement plaster (1:4)

inside and outside over masonry brickwork, gravel backing in

the rear of well steining, RCC cover slab in cement concrete

128 (1:2:4) using 12mm size hg chips fitted with iron lifting handles 30,474.09 0.00

including earthwork in open well excavation in all kinds of soil

and refilling of cavity around the pit & painting the iron works,

watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per approved

specification and direction of the Engineer in charge 1.40m dia x

2.00m deep soakway pit .

262 Sub-Total of Plumbing Works 25,05,372.18 4,66,938.74

263 Electrical Works 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS/ HFFR PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit,

264 with modular switch, modular plate, suitable GI box and earthing 0.00 0.00

the point with 1.5 sq.mm. FRLS/ HFFR PVC insulated copper

conductor single core cable etc as required.

265 a) Group C Point 288 1,319.24 - 3,79,941.12 0.00

2 Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with 1.5

sq. mm FRLS/HFFR PVC insulated copper conductor single core

266 cable in surface/ recessed PVC conduit, and earthing the point with - 0.00 0.00

1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single

core cable etc. as required.

267 a) Group C Point 173 776.44 - 1,34,324.12 0.00

3 Wiring for twin control light point with 1.5 sq.mm FRLS/ HFFR

PVC insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS/ HFFR PVC insulated copper conductor single core

cable etc as required. Point 1 1,419.54

4 Supplying and fixing two module stepped type electronic fan

269 regulator with proper modular plate switch box including - 31,619.28 0.00

connections etc. as required. No 87 363.44

5 Supplying and fixing 6 Amp Socket with 6 Amp switch (Modular

Type) on existing board. No 22 207.68

6 Supplying & fixing suitable size GI Box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular

switch etc. as required. No 0 440.14

7 Supplying & fixing suitable size GI Box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2Nos 3pin 5/6 amps modular socket outlet and 2Nos 5/6

amps modular switch etc. as required. No 77 647.82

Supply, installation, testing & commissioning of 6 / 16 Amp Plug

Boards consisting of a 16 Amp clip-in type modular switch with

273 indicator and a 6/16 Amp clip-in type modular shuttered plug - 23,797.06 0.00

socket fixed on metallic concealed box including interconnections

and making good the damages caused complete as required and as

per direction of Engineer-in-charge. No 43 553.42

9 Supplying and fixing 20 amps, 240 volts, SPN industrial type,

socket outlet, with 2pole and earth, metal enclosed plug top

alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure,

on surface or in recess, with chained metal cover for the socket out

let and complete with connections, testing and commissioning etc.

as required. No 36 1,562.32

10 Wiring for circuit/ submain wiring along with earth wire with the

following sizes of FRLS/HFFR PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC conduit as

required -

276 a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Mtr 2040 258.42 - 5,27,176.80 0.00

277 b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Mtr 855 319.78 - 2,73,411.90 0.00

278 c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Mtr 440 429.52 - 1,88,988.80 0.00

279 d) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Mtr 200 755.20 - 1,51,040.00 0.00

280 e) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Mtr 300 1,391.22 - 4,17,366.00 0.00

281 Light Fixture - - 0.00 0.00

11 Supplying an fixing of recess/surface mounted

2'x2'(595mmx595mmx70mm(+/-5%) square shaped LED made up

of CRCA powder coated housing with lumen efficacy not less than

140lm/W and lumen output not less than 3600 lumens , CRI not

less than 80, CCT of 5700-6500 degree K,

THD less than 10%,internal surge protection of 3 KV, complete

with Non integrated isolated electronic driver (protects the output

/secondary side from any disturbance on the input / primary side

283 ensuring safe operation)and all other accessories suitable for 0.00 10,75,843.76

operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs as

required as per direction of Engg.-in-Charge

12 Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 18 W LED luminaire of dimension

of consists of white powder coated , die-cast Alluminium housing

with high quality frosted diffuser for glare-free uniform lighting

distribution with wattage not more than 18 watt and lumen output

284 of 1800 lumens, , CRI not less than 80,CCT of 6000 degree 0.00 2,21,698.40

K,THD less than 10%, with electronic driver, internal surge

protection of 3 KV , L70 B50: 50000 hrs and all other accessories

suitable for operation on 220 V to 240 V supply as required as per

direction of Engg.-in-Charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

13 Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 9 W LED luminaire of dimension of

consists of white powder coated , die-cast Alluminium housing

with high quality frosted diffuser for glare-free uniform lighting

distribution with wattage not more than 9 watt and lumen output of

285 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD 0.00 35,546.32

less than 10%, with electronic driver, internal surge protection of 3

KV , L70 B50: 50000 hrs and all other accessories suitable for

operation on 220 V to 240 V supply as required as per direction of

Engg.-in-Charge.

14 SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2200 lumen

286 complete with electronic driver and all other accessories with 0.00 6,872.32

diffuser having 2 years warranty i/c connection etc as required as

per direction of Engg.-in-Charge.

15 SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser, above

wash basin complete with all accessoriesetc. directly on wall,

287 including connection with 1.5 sq. mm FRLS PVC insulated, copper 0.00 8,684.80

conductor, single core cable and earthing etc. as required as per

direction of Engg.-in-Charge.

16 Providing and fixing IP65 LED Bulk Head Light of 15w with UV-

resistant housing, opal diffuser, PF ≥ 0.90 driver, CRI ≥80,

complete with necessary mounting accessories, wiring, testing and

commissioning as required at site. No 2 - 1,840.80

17 Supplying, installation, testing and commissioning of 1200 mm

sweep white/milky colour BLDC copper winding ceiling fan with

aluminium blades having wattage not more than 28W and air

289 delivery ≥215m3/min including wiring the down rod of standard 0.00 3,82,305.84

length (up to 30 cm) with 1.5 sq. mm PVC insulated, copper

conductor, single core cable etc. as required as per direction of Eng.-

in-Charge. No 87 - 4,394.32

18 Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as requiredas

required as per direction of Engg.-in-Charge . (Note : More than 5

cm length shall be rounded to the nearest 10 cm and 5 cm or less

shall be ignored)of ISI mark as approved.

19 Supplying, installation, of exhaust fan of heavy duty 300 mm sweep

1400 rpm with louvers of exhaust fan in the existing wall, including

291 fixing & connection as required as per direction of Eng.-in-Charge. 0.00 22,160.40

Replacement Warranty will be 2 years.

292 Db, MCB and RCCB - - 0.00 0.00

20 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/

recess, complete with tinned copper bus bar, neutral bus bar, earth

293 bar, din bar, interconnections, powder painted including earthing - 0.00 0.00

etc. as required. (But without MCB/RCCB/Isolator). (For all Floors

LDBs, PDBs, ACDBs & UDBs)

294 a) 4 way, Double door(8+12) No 4 - 5,988.50 0.00 23,954.00

295 b) 8 way, Double door(8+24) No 6 - 7,318.36 0.00 43,910.16

21 Supply and fixing 5A to 63A rating, 240/415V , 10kA, "C" curve,

miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with Connections, testing

and commissioning etc as required. -

297 a) 63 Amps, FP 10 KA MCB (C-Curve) No 6 - 2,527.56 0.00 15,165.36

298 b) 40 Amps, FP 10 KA MCB (C-Curve) No 4 - 2,527.56 0.00 10,110.24

299 c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) No 192 302.08 - 57,999.36 0.00

22 Supplying and fixing following rating, Four pole, (three phase and

neutral), 415 volts, Residual currents circuit breaker (RCCB),

300 having a sensitivity current 30mA in the existing MCB DB - 0.00 0.00

complete with connections, testing and commissioning etc. as

required. -

301 a) 63Amps 4P 415 volts RCCB 30 mA No 6 5,963.72 - 35,782.32 0.00

302 b) 40Amps 4P 415 volts RCCB 30 mA No 4 5,096.42 - 20,385.68 0.00

303 Panels - - 0.00 0.00

304 Main LT Panel - - 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

23 Supply, installation, testing and commissioning of CPRI approved

cubicle type sectionalised, front operated top entry dust and vermin

proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC sleeve,

base channel, wiring with space heater, thermostat and control

MCBs shall be provided for all vertical sections of main LT Panel,

all hinged door shall be earthed through 2.5 sq mm tinned braided,

305 the incoming and outgoing feeders shall be accommodated in a - 0.00 0.00

modular arrangement, detachable gland plates, adequate size cable

alley, Sign writing, Painting, Earthing, Numbering, Danger plate,

including PVC insulated copper FRLS wires of minimum 1.5

sq.mm & 2.5 sq.mm for CT's etc. with all accessories including

interconnections, earth bus, Surge protection Device(SPD) etc. as

required.

Two (2)-Incomer feeders (1no from Transformer and 1no from

DGset) each comprising of -

Two (2) - 400A 4P MCCB with ROM 36kA with adjustable

307 Thermal magnetic Release with Ics=100% Icu. with shunt trip.with - 0.00 0.00

axulary for BMS -

One(1)-Multifunction digital meter suitable for three phase four

wire system, unbalanced loading CL 1.0, flush mounting with RS

485 communication port for reading Voltage, Current, pf. KW,

KWH, KVA, KVAr, KVAh, KVArHr (BMS Compartibilty) -

One(1) set of 3P+N 65kA type 1+2 SPD with 63A rating,10KA

309 breaking capacity ,4P MCB Make- Legrand-DX3 / Siemens- - 0.00 0.00

Betaguard/ Schneider- Acti 9/ ABB SB 200 -

310 One(1) set of – 400/5A , 15VA , CL 1.0, CT - - 0.00 0.00

One Set ON/OFF Indicating lamp with control fuse/ MCB with

required other accesories. -

312 One (1)- Incomer feeder for Solar PV comprising of - - 0.00 0.00

One (1) - 63A, 4-Pole Motorized MCCB, 25kA, Ics = 100% Icu as

per IEC 60947-2, complete with shunt trip & auxiliary contacts,

electrically interlocked with Grid & DG incomers, along with

313 inbuilt 3-phase bi-directional (import/export) energy meter, CT - 0.00 0.00

operated, Class 1.0 accuracy, RS-485 Modbus communication,

grid protection relay (OV/UV/OF/UF), control wiring.

One(1)- Multifunction digital meter suitable for three phase four

wire system, unbalanced loading CL 1.0, flush mounting with RS

314 485 communication port for reading Voltage, Current, pf. KW, - 0.00 0.00

KWH, KVA, KVAr, KVAh, KVArHr (BMS Compartibilty)

One(1) set of 3P+N 65kA type 1+2 SPD with 63A rating,10KA

315 breaking capacity ,4P MCB Make- Legrand-DX3 / Siemens- - 0.00 0.00

Betaguard/ Schneider- Acti 9/ ABB SB 200 -

316 One(1) set of – 63/5A , 15VA , CL 1.0, CT - - 0.00 0.00

One Set ON/OFF Indicating lamp with control fuse/ MCB with

required other accesories. -

318 One (1)- 400A Motorized Auto transfer switch - - 0.00 0.00

Four(4) - Outgoing Feeders (For 1no Terrace Fire pump, 1no

319 water supply, 1no Lift and one Spares) each comprising of - 0.00 0.00

One (1) - 63A 4P Icu=100%Ics, MCCB with adjustable Thermal

320 Magnetic Release 25KA, with shunt trip.with axulary for BMS - 0.00 0.00

One(1)-Multifunction digital meter suitable for three phase four

wire system, unbalanced loading CL 1.0, flush mounting with RS

321 485 communication port for reading Voltage, Current, pf. KW, - 0.00 0.00

KWH, KVA, KVAr, KVAh, KVArHr (BMS Compartibilty)

One Set ON/OFF/ Trip Indicating lamp with control fuse/ MCB

with required other accesories. -

Four(4) - Outgoing Feeders for (2nos LDB & 2nos spare ) each

Comprising of -

324 One (1) - 40 Amp TPN, 10 KA MCB (C-Curve) - - 0.00 0.00

Eight(8) - Outgoing Feeders for (4nos AC DB, 2Nos PDB &

One spare ) each Comprising of -

326 One (1) - 63 Amp TPN, 10 KA MCB (C-Curve) - - 0.00 0.00

Three(3) - Outgoing Feeders for (Four spare ) each Comprising

328 One (1) - 32 Amp DP, 10 KA MCB (C-Curve) Set 1 - 4,08,267.02 0.00 4,08,267.02

329 Cables - - 0.00 0.00

24 Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured

330 power cable of following size suitable for 415 Volt, 3Ph, 50 c/s - 0.00 0.00

supply. -

331 a) 4C X 16 sqmm Mtr 90 - 400.61 0.00 36,054.90

332 b) 3.5C x 240sqmm Mtr 200 - 3,203.23 0.00 6,40,645.60

25 Supplying & Testing of 1.1 KV grade Cu XLPE Armoured power

333 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 0.00 0.00

334 a) 3C X 4 sqmm Mtr 360 - 419.61 0.00 1,51,058.88

335 CABLE LAYING - - 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

26 Laying of one number PVC insulated and PVC sheathed/ XLPE

power cable of 1.1KV grade of following size direct in ground

including excavation,sand cushioning,protective covering and

refilling the trench etc as required. -

337 a) Upto 35 sq. mm Mtr 10 416.54 - 4,165.40 0.00

338 b) Above 185 sq. mm and upto 400 sq. mm Mtr 180 479.08 - 86,234.40 0.00

27 Laying and fixing of one number PVC insulated and PVC sheathed

339 / XLPE power cable of 1.1 KV grade of following size on cable - 0.00 0.00

tray as required. -

340 a) Upto 35 sq. mm Mtr 440 47.20 - 20,768.00 0.00

341 b) Above 185 sq. mm and upto 400 sq. mm Mtr 20 189.98 - 3,799.60 0.00

342 TERMINATION OF CABLES - - 0.00 0.00

28 Supply & Making end Termination with brass compression gland

343 and Cu/aluminium lugs for PVC insulated and PVC sheathed cable - 0.00 0.00

of 1.1 kv grade (without cost of Cable) -

344 a) 4C X 16 sqmm No 6 269.04 - 1,614.24 0.00

345 b) 3.5C X 240 sqmm No 4 965.24 - 3,860.96 0.00

29 Supplying and laying of fallowing dia DWC HDPE pipe ISI

marked along with all accessories like socket, bend, couples etc.

conforming to IS 14930, Part II complete with fitting and cutting,

346 jointing etc. direct in ground (75 mm below ground level) including - 0.00 0.00

excavation and refilling the trench but excluding sand cushioning

and protective covering etc., complete as required.

347 a) 200 mm dia Mtr 10 326.86 - 3,268.60 0.00

348 CABLE TRAY - - 0.00 0.00

30 Supply Installation, Testing and Comisioning of perforated Hot

dipped Galvanised iron tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5% in convenient

sections, joined with connectors, suspended from the ceiling with

G.I suspenders including GI bolts & nuts etc as required.

350 a) 150 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 50 666.70 - 33,335.00 0.00

351 b) 300 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 50 905.06 - 45,253.00 0.00

352 c) 450 mm width X 50 mm depth X 1.6 mm thickness Mtr 50 1,255.52 - 62,776.00 0.00

31 10 Kva Ups With Smf Batteries Suitable For Minimum Back

Time 60 Minutes -

(A) Sitc Of 1 No. 10 Kva Ups With Smf Back-Up Batteries,

Suitable For 60 Minutes Configuration With :- 415V, 3Ph Input &

Single Phase Output On-Line Ups System Backup Protection For

60 Minutes And All Standard Accessories As Required. The

Inverter Will Have In Built Protection For Ground Fault, Dc

355 Reverse Polarity, Dc Over Voltage And Current Limitation, Ac - 0.00 0.00

Short Circuit, Ac Over Voltage And Current Limitation. The Ups

Technology Should Consists Of High Double-Conversion

Efficiency Igbt Based Rectifier On Line Type Ups.

356 Configuration Of Ups :- - - 0.00 0.00

357 3 Phase Input & Single Phase Output - - 0.00 0.00

The Above Mentioned On-Line Ups Must Have Following

Features -

1) Upgradeability :- Suitable For 20 Kva Ups, And Should Be

359 Upgradable To Work As Parallel Redundant Ups In Load Sharing - 0.00 0.00

360 2) Intelligent Lcd Display With Event Logging Facility. - - 0.00 0.00

361 3) Double Conversion. - - 0.00 0.00

362 4) Built In Paralleling Kit. - - 0.00 0.00

363 5) Igbt Technology For Rectifier And Inverter. - - 0.00 0.00

364 6) Split Static, Manual & Maintenance Bypass. - - 0.00 0.00

365 7) Input Power Factor Correction Less Than 0.95. - - 0.00 0.00

8) Input Harmonic Distortion Less Than 5% At 50% Load. With

The Application Of Igbt(Insulated Gate By Polar Transistor) Based

Rectifier, But 6/12 Pulse Is Not Applicable.

9) Software Communication :- Rj-45 Port To Communicate With

367 Bms And Should Be Snmp (Simple Network Management - 0.00 0.00

Protocol) Compatibility. -

368 10) Phase Reverse Sequence Operation - - 0.00 0.00

369 11) Automatic Static Bypass - - 0.00 0.00

370 12) Maintenance Bypass. - - 0.00 0.00

13) Technology : Micro Processor Based Controls, True Online,

371 Double Conversion Type, Should Have Cold Start Facility. - 0.00 0.00

372 14) Overall Efficiency :> 90% - - 0.00 0.00

15) Charger :- Should Have Built In Charger Of Minimum 10

Amp. (Separate From Rectifier) -

374 16) Back-Up Time :- 60 Min. With Smf Batteries. - - 0.00 0.00

(B) Sitc Of Sealed Maintenance Free Batteries Shall Be Along

With Dc Breaker With Enclosure Of Suitable Capacity Along With

No-Volt Coil With Suitable Capacity Of Contactor , U-Tube,

Required Size And Length Of 4 Core Copper Flexible Cables

Along With Terminals And All Accessories As Required For

Protection Of Ups. (For 10 Kva Ups). Minimum Guranttee

/Warranty Period:- 24 Months From The Date Of Installation.

376 ( C ) Sitc Of Battery Rack And Inter Link Cables. - - 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Total Cost Of 10 Kva On Line Ups (3 Phase In Coming And

Single Phase Out Going) & Sealed Maintenance Free Batteries

377 With Rack And Inter Link Cables. (A+B+C) (Cost For 1 Set Of 10 - 5,34,681.60 0.00

Kva Ups With Batteries & Rack) .Preferred Makes: Delta/ Vertive/

Numeric/ Apc Set 1 5,34,681.60

378 Earthing - - 0.00 0.00

32 Earthing with CU earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

379 plate having locking arrangement and watering pipe of 2.7 metre - 1,78,664.98 0.00

long etc. with charcoal/ coke and salt as required.

33 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with cover

380 plate having locking arrangement and watering pipe of 2.7 metre - 42,543.72 0.00

long etc. with charcoal/ coke and salt as required.

34 Providing and fixing 25 mm X 5 mm dia copper strip on

wall/surface or in recess for connection etc. as required. Mtr 210 1,174.10

35 Providing and fixing 50 mm X 5 mm dia GI strip on wall/surface or

in recess for connection etc. as required. Mtr 100 - 429.52

36 Providing and fixing 25 mm X 5 mm dia GI strip on wall/surface or

in recess for connection etc. as required. Mtr 150 214.76

384 Lightning Protection - - 0.00 0.00

Providing and fixing of lightning conductor finial, made of 25 mm

dia 1000 mm long, Solid Copper , having multiple prong at top,

with 85 mm dia 6 mm thick copper base plate including holes etc.

Along with Test junction complete as required.

38 Providing and fixing testing joint, made of 20mm x 3mm thick GI

386 strip, 125mm long, with 4nos of GI bolts, nuts, chuck nutts and - 856.68 0.00

spring washer etc. complete as requred. Nos 6 142.78

39 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or

387 surface of wall for lightning conductor complete as required.(For - 25,275.60 0.00

horizontal run) Mtr 170 148.68

40 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or

388 surface of wall for lightning conductor complete as required.(For - 15,109.90 0.00

vertical run) Mtr 65 232.46

41 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode

directly in ground as required. Mtr 30 230.10

390 42 200 KVA Silent type DG Sets & Other Accessories - - 0.00 0.00

Supply Installation Testing And commissioning of 200KVA at

0.8pf 415V 50Hz 3phase CPCB IV+ DG Set with AMF Panel

391 complete with 1500 RPM Diesel Engine of suitable BHP & AC - 0.00 0.00

Brush less Alternator mounted on a common base Frame & coupled

through a flexible coupling or close coupled.

Alternator 1. 1500 RPM, 1P or 3P, Brushless type, screen

protected, revolving field, Self-excited alternator conforming to

IS/IEC 60034-1 IP23, with standard Alternator Protection (over

voltage, over speed & Under voltage) 2. A reliable long life with

superior class 'H' insulation with temperature rise to Class H

Diesel Engine: Engine: Engine should comprise of Silencer,

Electronic governor, suitable rating battery , Battery charging

alternator, battery charger , Inbuilt Fuel tank with fuel pipe, AVM

pads , Control panel with 3P MCCB of suitable rating with short

circuit protections ( 25kA, 36kA, 50kA) with microprocessor based

393 controller indicating genset parameters ( i.e. volt, amps, KWH, - 0.00 0.00

KVAR, Hrs etc.), The diesel engine shall be capable of providing

10% overload for 1 Hr for every 11 Hrs of continuous running at

full load.

The DG set shall be supplied as per OEM specifications and shall

be tested at site along with below.1. CRDI Engine >25 KVA DG

set2. Water cooled Radiator coupled to engine3. Dry type air

cleaner with service indicator4. First fill of lube oil, Coolant & first

394 fill of Diesel5. Electrical starter motor with soft start System6. - 0.00 0.00

Battery charging alternator7. Remote Monitor system >58.5 KVA

& Above8. 2 years / 5000 Hrs Warranty from commissioning or 30-

month form supply.9. Emission control system - EGR & (DOC,

SCR for >75 KVA DG set)10.10 Mtrs Exhaust pipe from Silencer

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Genset Controller:

1. Microprocessor based genset monitoring, metering and control

system with full graphics LCD display for easy front panel access.

2. AMF relay, manual and remote start / stop modes for 1-ph & 3-

ph gensets 3. Backlit and full graphics display with power saving

feature

4. Engine parameter monitoring -Lube oil pressure, Engine coolant

temperature, Fuel level, Battery voltage, Engine running hours

5. AC Alternator parameter monitoring -Voltage L-N & L_L,

Current, kW, kVA (Phase & Total), Frequency, kWH, PF

395 6. Genset Protection: Engine: Low lube oil pressure, High coolant - 0.00 0.00

temperature, Battery High/Low Volts, Fail to Start, Sensor failure,

Low fuel level, Overspeed AC Alternator: Over/Under Voltage,

Over/Under, Frequency, Loss of AC sensing, Over frequency,

Over Current, kW Overload, Unbalancing load

7. Maintenance notification based on Engine Run Hour & due date

8.Communication: USB port, RS485, CAN

9.30-50 Event logs

Acoustic Enclosure: 1. Specially designed to meet stringent

MOEF/CPCB IV+ norms2. Weatherproof, powder coated Acoustic

enclosure for DG set for sound attenuation fabricated from 1.2 mm

/ 1.6 mm CRCA sheet steel (structure) with side wall fabricated

from 1.2mm /1.6 mm CRCA sheet and filled with PU

Foam/Rockwood for Fire retardant acoustic and for better safety3.

397 Designed to operate in extreme climatic conditions in temperatures - 0.00 0.00

ranging from -10 deg to 55 deg without any external aid4.

Fabricated base frame with AVM pads.5. Noise level is less than 75

db (A) at a distance of 1 Mtrs as per CPCB norms, complete in all

respect.

398 DG set as above Set 1 - 30,54,548.00 0.00 30,54,548.00

43 Supplying and laying MS pipe for horizontal and vertical run of

Exhaust piping with asbestos lagging and Al sheet cladding along

399 with clamps, MS Supports & all arrangments supports above 3 mtr 0.00 3,53,044.20

etc from the roof of DG Set as required.

44 Supply of Hand pump to pump the HSD fuel from barrels to

400 the DG tank with flexible hose pipes etc as required. 0.00 12,333.36

45 Constrution of DG foundation with M-20 Grade RCC(1:1.5:3) of

size 6.8m(L)X3m(W)X0.5m(H) with provisioning of 110 PVC

401 piping for Cable laying with all other required accessories as per the 0.00 64,543.64

direction of Engineering Incharge.

402 Sub-Total of Electrical Works 37,05,220.06 66,75,203.36

403 HVAC Works 0.00 0.00

404 1 Supply of A,C with indoor and outdoor unit 0.00 0.00

1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-

18000)with copper condensor & evaporator having ambient

405 1.1 temperature 52 degree celcius with comprehensive 1 year 0.00 4,93,138.52

warranty,5 years warranty on PCB, 5 years warranty on compressor

(Make: O-General/ Diakin/ Mitsubishi/ Hitachi)

2.0 TR high wall 5 star inverter type split A.C machine (BTU/Hr-

21000-24000) with copper condensor & evaporator having ambient

406 1.2 temperature 52 degree celcius with comprehensive 1 year 0.00 4,79,931.96

warranty,5 years warranty on PCB, 5 years warranty on compressor

(Make: O-General/ Diakin/ Mitsubishi/ Hitachi)

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

Supplying, Installation, Testing and Commissioning of 3TR 5star

inverter type Air Cooled Cassette type Air conditioners complete

with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-407

Green Refrigerant, wireless Remote, inbuilt drain pump, suitable

for 400/230V, 50 Hz ,1 /3 phase AC supply, including pipe, the

system shall be capable of performing cooling, dehumidification,

Air circulation, filteration & ventilation of following capacity with

Scroll/rotary compressor with min 5 year Original Equipment

Manufacturer (OEM) warranty both compressor and Printed Circuit

Board (PCB) as specified. The system shall be able to deliver 100%

of the rated capacity as per relevant IS Code. The lab testing reports

as per IS: 1391 shall be submitted from National Accreditation

Board for Testing and Calibration Laboratories (NABL) accredited

as per International Electrotechnical Commission (IEC) 17025

standards/Central Power Research Institute (CPRI)/ Electrical

Research and Development Association (ERDA)with Original

Equipment Manufacturer (OEM) etc. complete as per CPWD

specification and as per IS: 1391 as required. surface / concealed

copper Refrigerant piping with insulation (closed cell elastomeric

nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU),

copper power and control cable upto 5.5 Mtr (IDU to ODU)

including drain

408 2 REFRIGRANT PIPING - - 0.00 0.00

Supply,installation of hard/soft copper refregrant piping of size 5/8

inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm

FRLS Copper control cable alongwith 25 mm weather proof closed

cell nitrile insulation ,complete with fitting of bends and other

nesessary material to complete the job.

410 2.1 1 TR to 3 TR high wall split A.C Mtr 350 - 2,286.84 0.00 8,00,394.00

411 3 FRAME WORK - - 0.00 0.00

Supply,installation & fabrication of MS base frame for both indoor

412 and outdoor unit and other nesessary material to complete the job. 0.00 0.00

413 3.1 1 TR to 3 TR high wall split A.C Nos 35 - 2,124.00 0.00 74,340.00

414 4 DRAIN PIPING - - 0.00 0.00

Supply,installation & fabrication of Insulated drain water piping

415 from indoor to nearestdrain point separate to all and other 0.00 0.00

nesessary material to complete the job. - -

416 4.1 25mm nom. Dia pipe Mtr 350 - 179.36 0.00 62,776.00

417 5 CONTROL CABLE - - 0.00 0.00

Supply,laying of control cable and other nesessary material to

complete the job. - -

419 5.1 For 1 TR to3 TR high wall split A.C Mtr 350 - 145.14 0.00 50,799.00

Supply and fixing of 4kVA Voltage stabilizer (Make-V-

Guard/Microtek Nos 7 - 9,383.36

Supply and fixing of 5kVA Voltage stabilizer (Make-V-

Guard/Microtek Nos 28 - 10,466.60

422 Sub-Total of HVAC Works 0.00 55,30,964.44

423 Firefighting Works 0.00 0.00

424 1 Terrace Pump 0.00 0.00

Supplying, installation, testing and commissioning of electric driven

terrace pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast

426 iron body & bronze impeller with stainless steel shaft, mechanical 0.00 0.00

confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class

427 of protection for enclosure, horiziontal foot mounted type with 0.00 0.00

Class-'F' insulation, conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

430 450 lpm at 35 m Head 0.00 0.00

431 Pump as Above Set 1 94,400.00 - 94,400.00 0.00

432 2 MCC Panel - - 0.00 0.00

Supply, installation, testing and commissioning of Wall mounted

sectionalised, front operated top entry dust and vermin proof

M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,

50Hz distribution system fabricated out of 2.0 mm thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and

433 vermin proof, powder coated of approved shade after 7 tank - 0.00 0.00

treatment process, cable alley, insulated busbar with heat

shrienkable PVC sleeve, base channel, complete with all

accessories including interconnections, proper earthing etc as

required. Make:-LEGRAND, L&T, Siemens or equivalent.

One (1)- 63 Amp, 10 KA,4P MCB with 3 Nos Phase indicating

434 lamps with control fuse/ MCB, Digital Voltmeter & Ammeter with - 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

One (1) - DOL with O/L and Single Phasing Preventor suitable for

435 10 HP motor(minimum). ON/OFF indication lamps, Auto manual - 0.00 0.00

switch and ON/OFF push button. -

One (1) - Set of Auxilliary relay for automatic operation through

pressure switch. -

437 Panel As Above Set 1 - 32,767.42 0.00 32,767.42

3 Supply, laying, connecting, testing & commissioning of following

size of 1.1 kv grade multicore aluminium conductor XLPE

insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-

I) with upto date amendments etc. complete as required. Tagging

on both the ends will be done with aluminium tags etc. complete as

required.(Quantities as per site requirement shall be finally

estimated & executed accordingly with prior approval.)

a) 3 core x 16 sqmm Al. Ar. XLPE Cable (Fire Fighting MCC Panel

to Terrace Pump Set) Mtr 40 - 383.50

4 Supplying and making indoor end termination with brass

compression gland (Heavy duty) and suitable copper / aluminium

lugs for following size of XLPE insulated PVC sheathed copper/

440 aluminium conductor armoured/ unarmoured cable of 1.1 KV grade - 0.00 0.00

including cost of ferrules, cable sockets, insulation tape & other

accessories etc. complete as required.

441 a) 3 core x 16 sqmm Nos 4 318.60 - 1,274.40 0.00

5 Supply and installing of following size of perforated hotdip G.I.

cable trays including horizontal and vertical bends, reducers, tees,

cross members and other accessories as required and duly

442 suspended from the ceiling with full threaded GI suspenders, - 0.00 0.00

along the wall with supports and including painting etc. as required

& approved by thye Engineer

443 Incharge. - - 0.00 0.00

444 a) 100 mm width x 40 mm depth x 1.6 mm thickness Mtr 40 410.64 - 16,425.60 0.00

6 Providing, laying, testing & commissioning of 'C' class heavy duty

MS Pipe conforming to lS 3589 and 1239 including fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe

on the wall/ceiling with proper core cutting & filling with

treatment, providing proper supports, using clamps and painting

with two or more coats of synthetic enamel paint of required shade

complete as required.

446 a) 100mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 10 2,993.66 - 29,936.60 0.00

447 b) 65mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 100 1,321.60 - 1,32,160.00 0.00

448 c) 25mm dia (Heavy class) as per IS-1239(Part-I)/2004 Mtr 5 729.24 - 3,646.20 0.00

7 Providing, fitting & fixing of following size cast iron double

flanged slim seal wafer type Butterfly valves with EPDM rubber

lined with lever operated as per IS-13095 with ISI mark of pressure

ratting PN-1.60 including fixing the same with supply of required

jointing materials like rubber insertion, MS nuts & bolts, paint etc.

and testing the joints with required water pressure for all floors etc.

all complete as per specification & direction of E.I.C.

450 a) 100mm NB Nos 1 6,289.40 - 6,289.40 0.00

451 b) 65mm NB Nos 3 5,310.00 - 15,930.00 0.00

8 Providing, fitting & fixing of following size cast iron double

flanged Y type strainer with SS 304 perforated screen confirming

to IS 1538 with ISI mark of pressure rating PN-1.60 including

452 fixing the same with supply of required jointing materials like - 0.00 0.00

rubber insertion, MS nuts & bolts, paint etc. and testing the joints

with required water pressure & all complete as per specification &

direction of E.I.C. -

453 a) 100mm Dia Each 1 6,395.60 - 6,395.60 0.00

9 Providing, fixing, testing and commissioning of following size cast

iron double flanged type Non Return Valve as per IS- 5312 (Part

1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing

454 the same with supply of required jointing materials like flanges, - 0.00 0.00

rubber insertion, MS nuts & bolts, paint etc. and testing the joints

with required water pressure etc. all complete as per specification &

direction of E.I.C. -

455 a) 65mm NB Nos 1 6,726.00 - 6,726.00 0.00

10 Providing, fixing, testing and commissioning of 25 MM C.I. single

Air Relief Valve with stop cock confirming to IS:14845/2000 with

ISI mark for water works purpose including fixing the same with

hydrant riser including testing & commissioning the system etc. all

complete as per approved specification & direction of EIC.

11 Providing, fixing, testing and commissioning of 25MM SS Ball

Valve suitable for test pressure of not less than 15kg/sqcm with

457 nuts, bolts, gaskets, necessary accessories etc. all complete as per 0.00 8,920.80

approved specification & direction of EIC.

12 Supply, Installation, Testing & Commissioning of Pressure gauge

of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of

suitable size with all accessories as per direction of Engineer-in-

charge. Nos 3 1,864.40

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

13 Supply, Installation, Testing & Commissioning of Swinging pattern

wall fixing first aid hose reel made from MS sheet and waterways

and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long

with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I.,

complete with all accessories as per direction of Engineer-in-

charge. Nos 2 10,001.68

460 FIRE EXTINGUISHER - - 0.00 0.00

Note : [1] All Fire Extinguisher shall be HCFC, CFC and Halons

free. [2] The Fire Extinguisher Manufacturer/Supplier shall provide

461 declaration, Technical Data Sheet/cutsheet of All type of Fire - 0.00 0.00

extinguisher to be installed.

14 Providing and fixing Carbon-di-oxide fire extinguishers consisting

of welded M.S cylindrical body,squeeze lever discharge valve fitted

with internal discharge tube, ISI marked high pressure discharge

462 hose, discharge nozzle, suspension bracket, confirming to IS : - 0.00 0.00

15683 finished externally with red enamel paint and fixed to wall

with brackets with

rawl plug/dash fasteners complete with internal charge with CO2

gas conforming to IS : 307-1996.. -

464 a) Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006) Nos 14 - 9,086.00 0.00 1,27,204.00

15 Providing and fixing ABC stored pressure dry chemical powder

(mono ammonium phosphate) Fire Extinguisher IS : 15683 latest

revision manufacturer and of CRCA sheet in welded construction,

finish with High quality epoxy polyster powder coated complete

with brass forged ball valve, gun metal cap and nozzle, including

initial filled and wall suspension bracket (suitable for fighting in

class 'A', B & 'C' that is wood, textile, flammable liquid, electric

and gases). - -

466 a) Capacity 6 Kg (IS : 15683 : 2006) Nos 14 - 3,851.52 0.00 53,921.28

467 B MISCELLANEOUS WORK : - - 0.00 0.00

16 Single sided EXIT LED Light fitting signage(both side visible)

with built in battery back-up for 2 hrs with proper wiring with PVC

conduiting from the existing power sources for all floors etc.

469 Sub-Total of Firefighting Works 3,38,780.36 2,67,417.50

470 ELV Works 0.00 0.00

471 1 Ip Dome Camera 0.00 0.00

Supply, Installation, Testing & Commissioning of 5MP IP Network

TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8"

CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple

stream at various resolution & Frame Rates, Min. Illumination

required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with

upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True

WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance

Video Compression technology such as H.265, H.264 & MJPEG ,

Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC,

WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge

Intelligence Video Analytics : Video Motion Detection, Tampering,

472 Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region 0.00 5,99,713.76

Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256,

SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex

Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE

(802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast

Aluminium Housing, Having Operating temp range : –40°C to 60°

C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-

4), FCC Part 15, EN 55032 & RoHS (EN63000)/ NDA/ STQC

compliant.

473 2 Ip Bullet Camera-VF - - 0.00 0.00

Supply, Installation, Testing & Commissioning of 5MP IP

Network TDN Low-Light IR motorized Lens Bullet Camera, 1/2.8"

CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple

stream at various resolution & Frame Rates, Min. Illumination

required 0.007 lux (color), 0 Lux IR On, 4 IR LEDs Smart IR with

upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True

WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance

Video Compression technology such as H.265 & H.264 High

Profile & MJPEG , Triple stream, Fixed Lens 2.8mm, BLC, HLC,

3DNR White Balance, Minimum Edge Intelligence Video

Analytics : Video Motion Detection, Tampering, Loitering,

Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of

Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream

Encryption, Dual channel Audio, Alarm: 1In/ 1out, 256GB SD card

support, PoE (802.3 af) and 12V DC, Max 6W, IP 66, IK 10 vandal

proof with Die Cast Aluminium Housing, Having Operating temp

range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T

compliant, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS

(EN63000)/NDA /STQC compliant.

475 3 Nvr Processor - - 0.00 0.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

SITC of 64Ch 4K Network Video Recorder 8 sata , Up to 12

Megapixels resolution recording,Remonte Connection 128,

SSynchronous Playback16CH, RAID0, RAID1, RAID5, RAID10.

476 Supported, RS-232, RS-485, Keyboard, Front panel: 2 × USB 2.0, 0.00 3,09,337.00

Rear panel: 1 × USB 3.0,ALARM IN/OUT-16/4, Incoming

bandwidth-320Mbps or 200Mbps (when RAID is

enabled),2HDMI/2VGA. /STQC compliant. Nos 1 3,09,337.00

477 4 Supply Installation Of 8Tb Surveillance Sata Hdd. Nos 4 - 22,840.08 0.00 91,360.32

478 5 Led Display - - 0.00 0.00

SITC of 55" UHD IPS Commercial Digital Display for Small Size

Discussion & Chambers: Brightness (440 nits or higher), Dynamic

Contrast Ratio (Dynamic MCI (Hz)):1000000:1) 1000000:1, Static

479 (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, - 0.00 0.00

Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound

Output):10W + 10W, Speaker System:

2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX,

480 webOS version (webOS 6.0), BIS Certification with 3 years onsite 0.00 1,10,777.22

warrenty. Nos 1 1,10,777.22

481 6 L3 Poe Access Switch - - 0.00 0.00

The Switch Should Have 8 X 10/100/1000Base-T And 4 X 10G

Sfp+ Ports. -

483 The Switch Should Have 2 Gb Ram And 2 Gb Flash - - 0.00 0.00

Should Have Internal Ac Power Supply 100 To 240 V Ac With 50

To 60 Hz And Equipped With 3 Pin Plug. -

Switch Should Have Minimum Switching Bandwidth Of 128 Gbps

485 And Forwarding Rate Of 95 Mpps For Line Rate Performance. - 0.00 0.00

Switch Should Support Minimum 16000 Mac Addresses Per

System -

487 Switch Should Support Jumbo Frames – 9,000 Bytes - - 0.00 0.00

Switch Should Support Minimum 2000 Active Vlans And 802.1Q

Vlan Tagging -

489 Switch Should Support Voice Vlan, Lldp And Lldp-Med - - 0.00 0.00

490 Switch Should Support Ipv4 And Ipv6 Static Routing - - 0.00 0.00

Switch Should Support Vrrp, Igmp V1/V2/V3, Ospfv2/V3, Ripng

491 And Bidirectional Forwarding Detection (Bfd) By Adding A - 0.00 0.00

Feature License If, Required In Future. -

Switch Should Support Class-Based Queuing With Prioritization

Switch Should Support Queuing Based On Vlan, Interface And

Switch Should Support Wred, Marking, Policing, And Shaping

Switch Should Have Modular Operating System For Enterprise

Grade Performance. -

496 Switch Should Support Snmpv2 And Snmpv3 - - 0.00 0.00

Switch Should Support Ipv6 Management Including Neighbor

497 Discovery, Logging, Telnet, Ssh, Web, Snmp, Ntp And Dns - 0.00 0.00

The Switch Should Have Ieee 802.1Ag (Connectivity Fault

Management) Standard Support -

Switch Should Support Port, Vlan And Router Based Access

Control Lists (Acls) -

Should Support Minimum 1K Security Access Control Entries

501 Switch Should Support Mac Limiting - - 0.00 0.00

502 Switch Should Support Dynamic Arp Inspection (Dai) - - 0.00 0.00

503 Switch Should Support Dhcp Snooping - - 0.00 0.00

504 Switch Should Support L2-L4 Acl - - 0.00 0.00

505 Switch Should Support Control Plane Dos Protection - - 0.00 0.00

Switch Should Be Managable Through Cli, Web Interface, Sshv2

And Http/Https -

507 Configuration Backup Via Ftp/Secure Copy - - 0.00 0.00

The Switch Should Be Compliant With Ieee 802.3Af (Poe) And

802.3At (Poe+) Standard And Minimum Poe Power Budget Should

Be 190 Watt Which Can Be Used To Deliver 802.3Af Class 3 Poe

Power (Up To 15.4 Watt) And 802.3At (Up To 30 Watt) Standard-

Based Poe+ Power To Any Of The Copper Ports.

Should Be Rohs-6 Compliant, Ndpp/Ndcpp Certified And Having

Ipv6 Ready Logo Conformance. -

Should Have Fcc 47Cfr Part 15 Class A, En 55022 Class A, Ices-

510 003 Class A, Cispr 22 Class A Certifications / Compliance. - 0.00 0.00

The Switch Should Be Supplied With 5 Year Warranty Including

But Not Limited To Advanced Faulty Part Replacement, Os Bug

511 Fixing, All Major And Minor Software Update And Upgrade 0.00 1,41,600.00

During The Warranty Period.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST

7 Supplying, Fitting, Fixing, Connecting And Testing Cat6 Utp Rj45

Loaded Patch Panel & Connector - 24 Port Loaded 19" Panel - 1 U,

Panel: Dc01 Galvanised Sheet Steel, Compliant With Standards:

Iso/Iec 11801 Edition 3.0 Cenelec En 50173-1 2007 Ansi/Eia/Tia

568 C2-1 Iec Series 60603-7, Nfc 20730, Standard 8877 – 603.7,

Contacts: Gold/Nickel, Thickness Of Gold > 0.8 Μm Minimum,

Equipped With Rear Cable Guide To Hold Cable During

512 Maintenance,The Connectors Are Connected From The Front 0.00 31,860.00

Without A Special Tool. Equipped With 4 Cassettes Of 6 Rj45 Cat.

6 Connectors With Toolless Fast Connection, Marked 568 A/B,

Max. Number Of Connections And Disconnections: 5 Without

Replacing The Wire, Endurance: 2500 Operations (Plug-In/Pull-

Out) Ik03, Operating Temperature: -40°C To +70°C.

8 Supply Fitting, Fixing, And Testing Of Blue/Yellow Color Cat6

Lcs2 U/Utp 1 Mtr (3.5 Ft) Factory Made Lcs2 Patch Cord With

Boot Factory Crimped Pvc, Performance At 250Mhz Should Be As

Per Standards - Iec 61935-2 - Ed. 3.0 Iso/Iec 11801, Usage Temp

– 20 To + 60°C, No Of Twists 500, No Of Insertions 750, 24 Awg

For Rack End. Nos 48 - 417.72

9 Supply Fitting, Fixing, And Testing Of Blue/Yellow Color Cat6 A

Lcs2 U/Utp 2 Mtr (6.57 Ft) Factory Made Lcs2 Patch Cord With

Boot Factory Crimped Pvc, Performance At 250Mhz Should Be As

Per Standards - Iec 61935-2 - Ed. 3.0 Iso/Iec 11801, Usage Temp

– 20 To + 60°C, No Of Twists 500, No Of Insertions 750, 24 Awg

For Rack End. Nos 2 - 556.96

515 10 Wall Mount 12 U Rack - - 0.00 0.00

Providing, Fixing, Fitting, Installation And Testing Of Of 12U Wall

Mounted Networking Cabinet 600X650 (Hxwxd): Rack Must Be

Along With The Following Components Like; Width (Mm)-600,

Depth (Mm) - 650, Approx.Net Wt (Kg) - 30, Crca 'D' Grade

Thickness (Mm) - 1.2, Ral 9017 (Matt Black), Glass - 4Mm

Toughened Tinted Glass Door, Accessories:, Cooling Fan (230V

516 A/C 90 Cfm) - 4 Nos, Pdu 230Vac - 2 No, Cable Manager Metal- 4 0.00 41,300.00

Nos, Mounting Hardware (20 Sets Of M6 Screws,Washer,Cage

Nuts (Nickel Coated)) - 1 No, Wall Screws (4 Sets Of 2'' Screws,

Washer,Rubber Grommet (Nickel Coated)) - 1 No, Door Lock - 1

No, Front Metal Band -1 No. In The Rack There Must Be

Maintained 1 U = 1.75 Inches Space.

11 Supplying And Drawing Of Utp 4 Pair Cat6 Lszh Lan & Voice

Cable (Awg 23)In The Existing Surface /Recessed Steel /Pvc

Conduit As Required. (For Data / Cctv Outlet In Existing Conduit)

518 a) 1 Run Of Cable Mtr 1,440 - 115.64 0.00 1,66,521.60

12 Supplying And Fixing Of Following Sizes Of Med. Class Pvc

Conduit Along With The Accessories In Surface / Recess &

Cutting The Wall And Making Good The Same In Case Of

Recessed Conduit As Required. -

520 a) 20 Mm Mtr 900 152.22 - 1,36,998.00 0.00

521 b) 25 Mm Mtr 300 166.38 - 49,914.00 0.00

522 Sub-Total of ELV Works 1,86,912.00 15,68,820.62

523 Grand Total 6,76,78,721.66 3,23,84,688.36

523 Grand Total 6,76,78,721.66 3,23,84,688.36

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.03.03 17:52:45 IST