Widening of ROad

Cutting open of damaged BT road including cost and conveyance and all charges etc complete

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Construction of Granular Sub Base (GSB) specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD.

Providing and laying dense graded bituminous macadam with 100.120 TPH HMP producing an average output of 75 cum per hour using crushed aggregates of specified grading-II as per Table 500-10 of MORTH premixed with bituminous binder 60/70 Grade as per IS 73 @ 4.5 per cent by weight of total mix and filler cement at 2% by weight of total aggregates including loading of material with FE loader, heating of binder, aggregates and filler in Drum/Batch type Hot Mix Plant, transporting the hot mix to work site by tippers, laying with a paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled rollers and vibratory rollers to achieve the desired compaction and density including hire and operational charges of all T&P, seigionarage charges and all taxes etc. complete for finished item of work as per MORTH specification clause No. 507 complete in all respects but excluding cost of Tack Coat

Providing and applying tack coat with bitumen emulsion(RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Engaging of Air Compressor (7 cmm, Diesel) including all charges etc., Completed

Carting of excavated surplus earth to an initial lead of 10.00 km from site of work including loading, unloading & conveyance charges etc., complete

Supplying and application of hot applied thermoplastic road marking compound 2.5mm thick including reflectorising glass beads @ 250 gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per MORTH section 803.4 and IRC 35-2015,

Supply & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(High impact polysterene) or ABS or ASA(Acrylic Strene Acrylonitrite and Reflective Panels with micro prismatic lens capable of providing total internal reflection of light entering the lens face (STUDS)

supply and fixing of spring parking post barriers high grade polyurethane material with 3 white reflective taps etc., complete.

supply and fixing of mild steel frames and grills including cost and conveyance and all charges etc complete.

Supply and placing of Central Divider Blocks of height 0.90m including cost and conveyance and all charges etc complete