REPAIR/ MAINTENANCE / REPLACEMENT OF SPARE OF VT PUMPS, CENTRIFUGAL PUMPS, STP PLANTS AND ALLIED WORKS IN WEST AREA UNDER GE DEHU ROAD

Amount

Disconnection the suction and discharge pipe line connection,Diconnection coupling motor of existing centrifugal pump of kirloskar make,discharge capacity 61 LPS with head 85 mtr, motor capacity100 HP . Lifting and removing pump from its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly,repair the repariable spare parts like shaft, key,Impelliar,bearing upper casing etc and replacement the unserviceable parts as required . Reassembling the pump including painting with two coats of synthetic enamel paint in expose surface of pump after necessary surface preparation , marking of number SM/ MES or srl No and installing to its existing foundation. Commissioning, connecting up and testing complete as directed .Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

M&L for metalling,grinding,polishing,balancing with shape complete to existing impeller 1st stage suitable for Pump set for existing kirloskar make pump all as directed by engr-in-charge.

M&L for metalling,grinding,polishing,balancing with shape complete to existing impeller 2nd stage suitable for Pump set for existing kirloskar make pump all as directed by engr-in-charge.

M&L for metalling,grinding,polishing,balancing with shape complete to Pump shaft suitable for Pump set for existing kirloskar make pump all as directed by engr-in-charge.

Supply only Coupling Key Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Key for Impeller Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Key for Sleeve Nut Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Bolt for upper and lower half casing Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Taper pin with washers and nuts for lower and upper half casingCoupling Key Suitable for Kirloskar. pump set DSM 100 HP.

Supply Draing plug for casing suitablefor 15 HP pump Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Paper packing between lower and upper casing Key Suitable for Kirloskar. pump set DSM 100 HP.

Supply only O ring for shast sleev Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Wear Ring suitable for Pump set Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Shoulder Ring in CI Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Interstage Ring Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Lantern Ring Suitable for Kirloskar. pump set DSM 100 HP.

Supply only DE ball bearing Suitable for Kirloskar. pump set DSM 100 HP.

Supply only DE Bearing Cover Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Cartridge for bearing, DE Suitable for Kirloskar. pump set DSM 100 HP.

Supply only NDE Bearing Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Cartridge for bearing, NDE Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Bearing cover, NDE Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Bearing Cap Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Bearing nut,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Shaft sleeve, DE/NDE,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only stuffing box bush,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Water Deflector DE/NDE Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Air vent,Suitable for pump set pump set DSM 100 HP make-Kirloskar.

Supply only Hex screw for bearing cover,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Cylindrical pin,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Round Lock nut ,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Gland Packing,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Vent Valve,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Flexible ST Hose Pipe,Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Gland stuffing box suitable for nut and bolts Suitable for Kirloskar. pump set DSM 100 HP.

Supply only Cooling PVC flexible of Suitable for Kirloskar. pump set DSM 100 HP.

Disconnection the suction and discharge pipe line connection,Diconnection coupling motor of existing centrifugal pump of kirloskar make,discharge capacity 34 LPS with head 76 mtr, motor capacity 60 HP . Lifting and removing pump from its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly,repair the repariable spare parts like shaft, key,Impelliar,bearing upper casing etc and replacement the unserviceable parts as required . Reassembling the pump including painting with two coats of synthetic enamel paint in expose surface of pump after necessary surface preparation , marking of number SM/ MES or srl No and installing to its existing foundation. Commissioning, connecting up and testing complete as directed .Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Wear Ring suitable for Pump set,suitable for Kirloskar Pump set 60 HP.

Supply only Shoulder Ring in CI suitable for PUMP set,suitable for Kirloskar Pump set 60 HP.

Supply only Interstage Ring suitable for Pump set,suitable for Kirloskar Pump set 60 HP.

Supply only Lantern Ring suitable for Pump set suitable for Kirloskar Pump set 60 HP.

Supply only Gland suitable for Pump set,suitable for Kirloskar Pump set 60 HP.

Supply only DE Bearing suitable for Kirloskar Pump set 60 HP.

Supply only NDE Bearing suitable for Kirloskar Pump set 60 HP.

Supply only Deep Groove Ball bearing suitable for Kirloskar Pump set 60 HP.

Supply only ANG Contact Ball bearing,suitable for Kirloskar Pump set 60 HP.

Supply only Bearing Cover,suitable for Kirloskar Pump set 60 HP.

Supply only Bearing Cover NDE,suitable for Kirloskar Pump set 60 HP.

Supplyonly Shaft Sleeve suitable for Kirloskar Pump set 60 HP.

Supply only Key for Impeller,suitable for Kirloskar Pump set 60 HP.

Supply only Key for Sleeve Nut,suitable for Kirloskar Pump set 60 HP.

Supply only Shaft Sleeve Nut ,suitable for Kirloskar Pump set 60 HP.

Supply only Round Lock nut,suitable for Kirloskar Pump set 60 HP.

Supply only Gland Packing,suitable for Kirloskar Pump set 60 HP.

Supply only Vent Valve,suitable for Kirloskar Pump set 60 HP.

Supply only Set of O Ring suitable for Kirloskar Pump set 60 HP.

Supply only Gland stuffing box suitable for nut and bolts suitable for Kirloskar Pump set 60 HP.

Disconnection the suction and discharge pipe line connection,Diconnection coupling motor of existing centrifugal pump of kirloskar make,discharge capacity 05 LPS with head 55 mtr, motor capacity 40 HP . Lifting and removing pump from its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly,repair the repariable spare parts like shaft, key,Impelliar,bearing upper casing etc and replacement the unserviceable parts as required . Reassembling the pump including painting with two coats of synthetic enamel paint in expose surface of pump after necessary surface preparation , marking of number SM/ MES or srl No and installing to its existing foundation. Commissioning, connecting up and testing complete as directed Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Wear Ring suitable for Kirloskar Pump 40 HP.

Supply only Shoulder Ring in CI suitable for Kirloskar Pump 40 HP.

Supply only Interstage Ring suitable for Kirloskar Pump 40 HP.

Supply only Lantern Ring suitable for Kirloskar Pump 40 HP.

Supply only Gland suitable for Kirloskar Pump 40 HP.

Supply only Liquid deflector suitable for Kirloskar Pump 40 HP.

Supply only DE Bearing suitable for Kirloskar Pump 40 HP.

Supply only NDE Bearing suitable for Kirloskar Pump 40 HP.

Supply only Deep Groove Ball bearing suitable for Kirloskar Pump 40 HP.

Supply only ANG Contact Ball bearing, suitable for Kirloskar Pump 40 HP.

Supply only Shaft Sleeve suitable for Kirloskar Pump 40 HP.

Supply only Key for Impeller suitable for Kirloskar Pump 40 HP.

Supply only Key for Coupling suitable for Kirloskar Pump 40 HP.

Supply only Key for Sleeve Nut suitable for Kirloskar Pump 40 HP.

Supply only Shaft Sleeve Nut suitable for Kirloskar Pump 40 HP.

Supply only Round Lock nut suitable for Kirloskar Pump 40 HP.

Supply only Gland Packing suitable for Kirloskar Pump 40 HP.

Supply only Vent Valve suitable for Kirloskar Pump 40 HP.

Supply only Set of O Ring suitable for Kirloskar Pump 40 HP.

Supply only Flexible ST Hose Pipe for suitable for Kirloskar Pump 40 HP.

Supply only Cooling PVC flexible suitable for Kirloskar Pump 40 HP.

Disconnection the suction and discharge pipe line connection,Diconnection coupling motor of existing centrifugal pump of kirloskar make,discharge capacity 2.2 LPS with head 55 mtr, motor capacity15 HP . Lifting and removing pump from its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly,repair the repariable spare parts like shaft, key,Impelliar,bearing upper casing etc and replacement the unserviceable parts as required . Reassembling the pump including painting with two coats of synthetic enamel paint in expose surface of pump after necessary surface preparation , marking of number SM/ MES or srl No and installing to its existing foundation. Commissioning, connecting up and testing complete as directed .Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Pump shaft Suitable for Kirloskar pump 15 HP

Supply only DE/NDE Bearing No 6306 Suitable for Kirloskar pump 15 HP

Supply only Shaft bush Suitable for Kirloskar pump 15 HP

Supply only Shaft coupling flexible Suitable for Kirloskar pump 15 HP

Supply only Star Nuts Suitable for Kirloskar pump 15 HP

Supply only Impeller Suitable for Kirloskar pump 15 HP

Supply only Air Fan Suitable for Kirloskar pump 15 HP

Supply only Impeller wear ring Suitable for Kirloskar pump 15 HP

Supply only Bearing housing.Suitable for Kirloskar pump 15 HP

Disconnection the suction and discharge pipe line connection,Diconnection coupling motor of existing centrifugal pump of kirloskar make,discharge capacity 05 LPS with head 55 mtr, motor capacity 20 HP . Lifting and removing pump from its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly,repair the repariable spare parts like shaft, key,Impelliar,bearing upper casing etc and replacement the unserviceable parts as required . Reassembling the pump including painting with two coats of synthetic enamel paint in expose surface of pump after necessary surface preparation , marking of number SM/ MES or srl No and installing to its existing foundation. Commissioning, connecting up and testing complete as directed .Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Pump shaft Suitable for Kirloskar pump 20 HP

Supply only DE/NDE Bearing Suitable for Kirloskar pump 20 HP

Supply only Shaft bush Suitable for Kirloskar pump 20 HP

Supply only Shaft coupling flexible Suitable for Kirloskar pump 20 HP

Supply only Star Nuts Suitable for Kirloskar pump 20 HP

Supply only Impeller Suitable for Kirloskar pump 20 HP

Supply only Mechanical Shaft seal Suitable for Kirloskar pump 20 HP

Disconnection the electric connection of existing unserviceable Kirloskar motor,taking out the motor from foundation and transportation to work shop for repair after issuing of proper gate pass.Taking out the burn winding coils from stator, cleaning of slots with soft wire brush and decarbonizing the internal surfaces of motor.Rewinding the motor with super enameled copper wire of existing size & gauge,insulating, heat and varnishing,Greasing,balancing the rotar and bearing and painting with two coat of synthetic eanamel paint complete and reassemble, reinstalled in original position,connection ,commissioning and testing complete all as directed by Engr-in -charge for under mentioned electric motor .

All as per Item No 98 here in before but Squirrel cage induction motor 100 HP 3 phase 415 Volt AC.

All as per Item No 98 here in before but Squirrel cage induction motor 60 HP 3 phase 415 Volt AC.

All as per Item No 98 here in before but Squirrel cage induction motor 40 HP 3 phase 415 Volt AC.

All as per Item No 98 here in before but Squirrel cage induction motor 15 HP 3 phase 415 Volt AC.

All as per Item No 98 here in before but Squirrel cage induction motor 20 HP 3 phase 415 Volt AC.

Supply only slip ring assy complete with studs made out of copper Suitable for Kirloskar Motor 100 HP

Supply only slip ring assy complete with studs made out of copper Suitable for Kirloskar Motor 60 HP

Supply only Carbon bush holder made of bronze Suitable for Kirloskar Motor 40 HP

Supply only Carbon brushes holder made of bronze as per existing sizes per sample Suitable for Kirloskar Motor 60 HP

Supply only Carbon brushes holder made of bronze as per existing sizes per sample Suitable for Kirloskar Motor 40 HP

Supply only Carbon brushes holder made of bronze as per existing sizes per sample Suitable for Kirloskar Motor 15/20 HP

Supply only Fan Blade Suitable for Kirloskar Motor 15/20 HP

Supply only Fan Blade Suitable for Kirloskar Motor 40/60 HP

Supply only Fan Blade Suitable for Kirloskar Motor 60 HP

Taking up the unserviceable cable of any type from ground, cable duct,and supply , laying and connecting with copper conductor including copper lugs in repair and PVC flexible pipes of suitable sizes of following capacities from panel board to starter to motor for connection. PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS: 694:2010 .

Supply & laying, connecting 50sqmm 3 core PVC Insulated XLPE and PVC Round Sheathed Multi Core Bright Annealed Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts complete. Make : Polycab,Finolex,Havells

Supply & laying, connecting 35sqmm 3 core PVC Insulated XLPE and PVC Round Sheathed Multi Core Bright Annealed Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to 35 sqmm three core Make : Polycab,Finolex,Havells

Supply & laying PVC Insulated XLPE and PVC Round Sheathed Multi Core Bright Annealed Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to 25 sqmm three core Make : Polycab,Finolex,Havells

Supply & laying PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .16 sqmm three core Make : Polycab,Finolex,Havells

M&L Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic with over load protection,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 400 Amps TPN ,Make: Legrand, Shakti, Havells, Crompton.

M&L for Moulded Case Circuit Breakers in repair (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic with over load protection,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 200 Amps TP ,Make: Legrand, Shakti, Havells, Crompton.

M&L for Moulded Case Circuit Breakers in repair (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic with over load protection,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 160 Amps TP ,Make: Legrand, Shakti, Havells, Crompton.

M&L Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic with over load protection,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 100 Amps TP ,Make: Legrand

M&L Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic with over load protection,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 63 Amps TP ,Make: Legrand

Taking down the unserviceable Starter from the existing panel and supply fixing the following type along with connection,providing Lug complet all as directed.

Supply and Fixing fully automatic star delta motor starter in sheet steel enclosure 415 Volt 3 Phase suitable relay range 9-15 Amps suitable for Motor capacity 17.5 HP,Type -MN-16 FASD Make L&T Havells,Legrand

Supply and Fixing fully automatic star delta motor starter in sheet steel enclosure 415 Volt 3 Phase suitable relay range 20-33 Amps suitable for Motor capacity 40 HP,Type -MN-32 FASD Make L&T Havells,Legrand

Supply and Fixing fully automatic star delta motor starter in sheet steel enclosure 415 Volt 3 Phase suitable relay range 45-75 Amps suitable for Motor capacity 60 HP,Type -MN-65 FASD Make L&T Havells,Legrand

Supply and Fixing fully automatic star delta motor starter in sheet steel enclosure 415 Volt 3 Phase suitable relay range 66-110 Amps suitable for Motor capacity 100 HP,Type -ML-6 FASD Make L&T Havells,Legrand

Taking down the unserviceable power contractor, motor protection from existing starter

M&L forThree pole power contractor,With integrated auxiliary contacts,Max. opt. current-9A,Max.25A opt.,Control voltage-415 with Integrated auxiliary contacts 1 NO + 1 NC Screw terminals Type-MNX 9.Make L&T

M&L for Three pole power contractor,With integrated auxiliary contacts,Max. opt. current-22 A,Max.32 A opt.current- ,Control voltage-415 with Integrated auxiliary contacts 1 NO + 1 NC Screw terminals Type-MNX 22.Make L&T

M&L forThree pole power contractor,With integrated auxiliary contacts,Max. opt. current-55 A,Max.85 A opt.current- ,Control voltage-415 with Integrated auxiliary contacts 2 NO + 2 NC Screw terminals Type-MNX 50.Make L&T

M&L for Three pole power contractor,With integrated auxiliary contacts,Max. opt. current-110 A,Max.125 A opt.current- ,Control voltage-415 with Integrated auxiliary contacts 2 NO + 2 NC Screw terminals Type-ML 6 .Make L&T

M&L for Motor protection circuit bracker,Rotary Type,Short circuit + Overload protection, conforms to IEC 60947-4-1 & 60947-2, suitable for 15 HP Motor,415 Volt,50 HZ,Thermal Release range-14-20A,Instantaneous Trip Current-325A,Make-L&T

M&L for Motor protection circuit bracker,Rotary Type,Short circuit + Overload protection, conforms to IEC 60947-4-1 & 60947-2, suitable for 20 HP Motor,415 Volt,50 HZ,Thermal Release range-24-36A,Instantaneous Trip Current-416 A,Make-L&T

M&L for Motor protection circuit bracker,Rotary Type,Short circuit + Overload protection, conforms to IEC 60947-4-1 & 60947-2, suitable for 40 HP Motor,415 Volt,50 HZ,Thermal Release range-24-36A,Instantaneous Trip Current-416 A,Make-L&T

M&L for Motor protection circuit bracker,Rotary Type,Short circuit + Overload protection, conforms to IEC 60947-4-1 & 60947-2, suitable for 40 HP Motor,415 Volt,50 HZ,Thermal Release range-45-63A,Instantaneous Trip Current-416 A,Make-L&T

Disconnecting and taking out theunserviceable VT pump set (Moter/Pump) from jack well and transporting to workshop for repair and return. including reinstalled in original position of capacity 60 HP VT Pump set with the following repair. a) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anti corrosive water resistant type black paint all as directed. b) Reassembling the complete pump set and re-erection and re-installation at its original position as directed c) Testing and commissioning complete all as directed by Engr-in-Charge. Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers 2) All new parts required will be measured and paid separately as supply only items. 3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete. 4)T&P , Transport etc incl in quated rate . .Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Suction case bearing suitable for Joyti VT Pump 60 HP

Supply only Impeller seal ring suitable for Joyti VT Pump 60HP

Supply only Bowl Bearing suitable for Joyti VT Pump 60 HP

Supply only Bowl studs (SS) suitable for Joyti VT Pump 60HP

Supply only Line shaft coupling (SS) suitable for Joyti VT Pump 60 HP

Supply only Bearing holder assembly suitable for Joyti VT Pump 60 HP

Supply only Line shaft Bearing (Throdan type) suitable for Joyti VT Pump 60 HP

Supply only Column studs /nut bolts (50 Nos) suitable for Joyti VT Pump 60 HP

Supply only Stuffing box bush suitable for Joyti VT Pump 60 HP

Supply only Latern Ring suitable for Joyti VT Pump 60 HP

Supply only Water deflector suitable for Joyti VT Pump 60 HP

Supply only Head shaft coupling suitable for Joyti VT Pump 60 HP

Supply only Head shaft coupling suitable for Joyti VT Pump 60 HP

Supply only Column pipe 150 mm suitable for Joyti VT Pump 60 HP

Supply only Impeller adjusting nut with screw suitable for Joyti VT Pump 60 HP

Supply only Impeller made out of MS with impeller key suitable for Joyti VT Pump 60 HP

Supply only Strainer Assembly suitable for Joyti VT Pump 60 HP

Supply only Bowl suitable for Joyti VT Pump 60 HP

Supply only Impeller shaft suitable for Joyti VT Pump 60 HP

Supply only Impeller collect assemly suitable for Joyti VT Pump 60 HP

Supply only Line shaft up to 1.5 mtr and replacement of the Line shaft coupling suitable for Joyti VT Pump 60 HP

Supply only NDE Bearing No 6307/C3 suitable for Joyti VT Pump 60 HP

Supply only electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for Joyti VT Pump 60 HP

M&L for MS work using angle iron 50x50 mm 5 mm thick including cutting, welding and fixing on wall or roof or floor using anchor fastner of suitable size complet all as directed.

Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carring out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity .Note:The rate for repair and replacement items will be measured and paid in rescepctive items as per site requirement.Note:(i)The labour elements is included in this item for fixing, replacement,repair items.(ii) Spare parts will be measured and paid as supply only.

Supply only Bearing suitable for 15 HP Blower.

Supply only Oil Seal uitable for15 HP Blower.

Supply only Oil Packing uitable for 15 HP Blower.

Supply only Gear Hub uitable for 15 HP Blower.

Supply only Gear Set uitable for 15 HP Blower.

Supply only Rotar Set uitable for 15 HP Blower.

Disconnection the electric connection and taking out the vertical Motor 60 HP capacity 415 volt 50HZ for VT Pump,.Taking out the burn winding coils from stator, cleaning of slots with soft wire brush and decarbonizing the internal surfaces of motor.Rewinding the motor with super enameled copper wire of existing size & gauge,insulating, heat and varnishing complete.Greasing,balancing the rotar and bearing and painting with two cat of synthetic eanamel paint, reinstalled in original position,connection ,commissioning and testing complete all as directed by Engr-in -charge for under mentioned electric motor Make:kirloskar.

On load Change Over open execution type 200 Amp 415 volts complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at A-I pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)60 HP-VT PUMP-03 Nos.

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at C-II pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)40 HP-01 No.(b)20HP-02Nos

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at C-I pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi) Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)15 HP-03 No.

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at A-II pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi) Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)100 HP-02 No. (a)60 HP-02 No. (a)40 HP-01 No.

Supply, install , testing and commissioning of LT panel cubical indoor type modular design, with 2 mm thick CRCA sheet steel with IP 52 tested, fabricated by welded frame construction with CRCA frame section, the enclosure shall be pretreated in eight tank process for degreasing, de-rusting and phosphated then the panel surface shall be finished/rubbed and painted with two coat of epoxy based powder coated paint of shade RAL 7032 internally and externally , compartmentalized (modular) design, provided with suitable ventilation in the form of louvers for better heat dissipation , all the live parts shall be shrouded with FRP material of fire retardant grade. The cable entry shall be from the bottom of the panel provided with suitable dia brass gland plates for provisioning specific bending radius for cable. The panel shall have opening arrangements on back and front side mounted on hinges. The Copper bus bar of rating 400 Amps shall be sleeved with heat shrinkable PVC sleeves of different colour code for RYB and neutral and bus bar system have a short circuit with stand capacity of 50 KA for one second. The bus bar shall be supported on SMC type , Single grip type support. The enclosure shall be provided with an earth bus bar of size 20 x 3 mm of copper. The panel shall be grouted with cement mortar PCC (1 : 2 : 4) type B-2. The panel shall be comprised and equipped with the following switch gears:- (AT Pump House No A-1)

(a) MCCB 320 Amp rating, 50 KA, TPN 415 Volt, 50 Hz – 01 No (As main incoming) Make : Legrand,ABB,Simens (b) On load change over switch panel mounting type 320 Amp rating 4 pole 415 Volt, 50 Hz front operated type – 01 No Make : Legrand,ABB,L&T (c) (MCB 415 Volt, 50 Hz TP, 200 Amp rating 50 KA – 03 No (For VT Pump) Make : Legrand,ABB,Simens (d) MCCB 415 Volt, 50 Hz 63 Amp rating 50 K TPN 50 KA=01 Make : Legrand,ABB,Simens (e) Fully automatic star delta motor starter in sheet steel enclosure 415 Volt 3 Phase suitable relay range 45-75 Amps suitable for Motor capacity 60 HP,Type -MN-65 FASD Make L&T ABB,,Legrand (f) Digital Volt meter (0-500) Volt, Make : AE,L&T (g) Digital Ammeter (0-100) Amp =03 Nos.Make : AE,L&T (h) Indicator lamp for ‘RYB’ phase ‘LED’ type – 03 No NOTE :- Protective fuses/relays required for the panel/motor circuit shall be provided as per std Engineering Practice for control panel wiring shall be provided and cost deemed included in the cost of panel.

Supply, install , testing and commissioning of LT panel cubical indoor type modular design, with 2 mm thick CRCA sheet steel with IP 52 tested, fabricated by welded frame construction with CRCA frame section, the enclosure shall be pretreated in eight tank process for degreasing, de-rusting and phosphated then the panel surface shall be finished/rubbed and painted with two coat of epoxy based powder coated paint of shade RAL 7032 internally and externally , compartmentalized (modular) design, provided with suitable ventilation in the form of louvers for better heat dissipation , all the live parts shall be shrouded with FRP material of fire retardant grade. The cable entry shall be from the bottom of the panel provided with suitable dia brass gland plates for provisioning specific bending radius for cable. The panel shall have opening arrangements on back and front side mounted on hinges. The Copper bus bar of rating 800 Amps shall be sleeved with heat shrinkable PVC sleeves of different colour code for RYB and neutral and bus bar system have a short circuit with stand capacity of 50 KA for one second. The bus bar shall be supported on SMC type , Single grip type support. The enclosure shall be provided with an earth bus bar of size 20 x 3 mm of copper. The panel shall be grouted with cement mortar PCC (1 : 2 : 4) type B-2. The panel shall be comprised and equipped with the following switch gears:- (AT Pump House No A-II)

(a) ACB fixed type 630 Amp rating, TPN 415 Volt, 50 Hz Type-DMX – 01 No (As main incoming) Make : Legrand,ABB,Simens (b) Off load change over switch panel mounting type 630 Amp rating 4 pole 415 Volt, 50 Hz front operated type – 01 No Make : Legrand,ABB,Simens (c) MCCB 415 Volt, 50 Hz TP, 200 Amp rating 25 KA – 02 No Make : Legrand,ABB,Simens (d) MCCB 415 Volt, 50 Hz 160 Amp rating 50 K TP 16 KA=02 Make : Legrand,ABB,Simens (e) MCCB 415 Volt, 50 Hz 125 Amp rating 50 K TP 16 KA=02 Make : Legrand,ABB,Simens (f) MCCB 415 Volt, 50 Hz 100 Amp rating 50 K TPN 16 KA=02Make : Legrand,ABB,Simens (g) Digital Volt meter (0-500) Volt, Make : AE,L&T (h) Digital Ammeter (0-100) Amp =03 Nos.Make : AE,L&T (j) Indicator lamp for ‘RYB’ phase ‘LED’ type – 03 No NOTE :- Protective fuses/relays required for the panel/motor circuit shall be provided as per std Engineering Practice for control panel wiring shall be provided and cost deemed included in the cost of panel.

Crown Chemicals

Om Sai Enterprises

S.M.Sales Corporation