Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹5.7 L+₹656.50 (0.12%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹7.5 L
EMD Value
₹15,100
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
PROVN OF CERTAIN MINOR WORKS AT NAGTALAO UNDER GE BANAR
2022_MES_564166_1
8822/57/E8
Open Tender
Civil Works
Item Rate
120 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹15,100
Yes
23 Dec 2022
19 Nov 2022
21 Dec 2022
19 Nov 2022
19 Dec 2022
5 Dec 2022
Amount
Excavation in post holes or similar holes in earth/concrete surface each not exc 0.5 cum getting out returning, filling in and ramming earth/broken rubble mixed with earth around in layers n exc 25cm , watering and removing surplus soil to distance not exceeding 50m and making good surface in soft/loose soil all as specified and directed by Engineer -in-charge.
S&F Fe-410-W (Gde E-250) quality-A rolled steel sections/hollow sections as in main and cross beams, purlins, where connected to common rafters and running rails fixed with angle cleats or other connecting plates all as specified.
S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut for 12mm dia shank and length of bolt exc 5cm and n . exc 10cm long complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of camoflague colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified.
M&L for preparing new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer as specified.
M&L for plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified.
M&L Pre-cast cement concrete solid block masonary 1:2:4 type B1 using 20mm graded stone aggregate exc 10cm in width, set in cement mortar (1:6) all as specified.
Jodhpur stone roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 complete all as specified.
M&L 25 mm thick cement concrete type B1 (1: 2: 4) using 20mm graded aggregate as in floor all as specified.
M&L 15mm thick screed bed or bedding layer in CM 1:6 floor finished all as specified.
M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified.
S&F ball brass valve, high pressure, polythene float and fly nut complete, screwed for iron pipe or brass ferrule of size 15mm complete all as specified.
M&l for non skid coloured ceramic tiles 300x300mmx7mm thick in floors set and jointed in neat cement slurry over and including 15mm thick in cement bedding layer mortar in 1:6 complete all as specified and directed.
M&L for glazed colour ceramic tiles of size 250x350x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied.
M&L for 15mm thick rendering in cm 1:6 on Concrete Surfaces finished even and smooth complete all as specified.
M&L for 10mm thick rendering in CM 1:4 over Concrete surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:4 as on ceiling / Chjja/ Ficia to fair finished even and smooth complete all as speciefied.
M&L for three coats of white wash on walls including preparation to newly plastered surfaces of walls complete all as specified.
M&L for three coats of white wash on ceiling / facia /RCC Chhaja etc including preparation to newly plastered surfaces complete all as specified.
M&L for two coat of cement base paint over a coat of white wash on new plastered surfaces of walls after necessary preparation of surfaces complete all as specified
M&L for carrying out water proofing treatment for roofs in the following stages (1) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm (V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm (vi) Material and labour for 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion complete all as specified and as directed
Supply only Integral water proofing compund complete all as specified.
S & F 15 mm bore Stop Valve cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repairall as specified.
S&F 15mm bore bib taps , cast copper alloy with crutch or butter fly handle screed for iron pipe and fixed complete all as specified.
S&F 110 mm dia PVC (SWR pipes) single socketed in any length with rubber rings joints fixed with walls all as specified.
S&F 110mm PVC(SWR) junction double, double T all as specified.
S&F 110 mm PVC(SWR) bends any radius all as specified.
S&F 110mm PVC(SWR) branch piece double, double / equal or unequal all as specified.
S&F 75 mm dia PVC floor trap plain grating including jointing with solvent cement complete all as specified.
S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.
S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified.
S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified.
M&L Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.
S&F for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube all as specified
S & F butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type - 21 for PVC door complete all as specified.
S&F 200mm long aluminium anodised tower bolt all as specified.
S&F 150mm long aluminum anodised handle fabricated type all as specified.
S & F Vitrous china wash basin oval type size550x400 mm including , waste pipe, MS brackets and pillar tap 15mm dia coast copper alloy chromium plated fancy type complete all as specified.
S&F towel rail aluminium anodised, 20mm dia, D type, 60cm long with bracket heavy duty fixed with screw complete all as specified.
S&F in vitreous china bowl urinal flat back size of 465x355*265 mm white with grating and union for discharge pipe (including flush pipe and waste pipe) as specified.
S&F 600x450mm bevelled edge mirror of slected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden ply with CP brass screw and cup washer with aluminium channel of suitable section alround all as directed by Engr-in-charge.
S&F soap dish, vitreous china type white of size 160x160x90mm size complete all as specified.
S&F Vitreous china urinal partition white of size 310x700mm as specified & directed by Engineer-in-Charge.
Supplying, fixing, jointing and testing 15 mm bore galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete all as specified.
Supplying, fixing, jointing and testing 20 mm bore galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid complete all as specified.
M&L for surface drerssing soft/ loose soil not exceeding 15 cm deep all as specified.
M&L for excavation in trenches in soft/loose soil not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc and getting out all as specified.
M&L for squared rubble walling Jodhpur type brought upto courses, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified.
M&L for cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in foundation filling & mass concrete all as specified.
M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in plinth courses, copings, kneelers, beds plates, kerbs, water troughs and like including weathering, slightlyrounded or chamfered and throating all as specified.
M&L for reinforcement cement concrete work in type B1 1:2:4 using 20 mm graded aggregate for slab supprted on walls, roofs, landings, deck slabs and in shelves all as specified.
M& L for mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending for slabs including mild steel wire complete all as specified.
M&L for formwork to edges of concrete flats, openings in concrete walls, roofs, floors and sides of RCC/PCC bands in walls, horizontal or slopings and similar work all exceeding 20 cm wide all as specified.
M&L for rendering 15mm thick on stone masonry surfacec or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surface and applying two coat of white wash on plastered surface complete all as specified.
M&L for removing excavated material exc 250m but not exc 500m and deposited all as specified.
Kusum Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .