CA NO. CWE BLY /GE(W) / 16 OF 2022-2023 ADDN/ ALTN TO SINGLE OFFR ACCN P-109 AT JAT ANNEXE AND SPL REPAIR TO WOODEN FLOORING OF ANTE ROOM IN JLA OFFRS MESS UNDER GE (WEST) BAREILLY

Amount

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories 75/100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on internal surface in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering on external surface on fair faces of brick work or concrete surfaces with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid seprately.

Supply only liquid water proofing compounding complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying two coat of oil bound distemper white or tinted on newly decorated or undecorated wall surface including preparation of surfaces and applying 2 mm thick wall core putty by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.

M & L for applying two coat of oil bound distemper white or tinted on old decorated wall surface including preparation and applying 2 mm thick puttyof surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.

M&L for preparation of newly plastered walls surfaces and applying two coats of wheather coat exterior emulsion paint over and including 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered walls surfaces and applying two coats of wheather coat exterior emulsion paint over and including 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparing old plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for vitrified coloured (doubled charge) tiles 10mm thick (square/ rectangular) ( 1200mm x 600mm ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick bedding layer of mortar, 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified coloured doubled charge tiles10 mm thick (square/ rectangular) ( 1200mm x 600mm ) on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering with cement mortat 1:4 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 (400x400) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick bedding layer of mortar 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 (600x600) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick bedding layer of mortar 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 (600x600) sqm, in wall/skarting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 (600mm x 300mm ) sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering finished even and smooth of mortar 1:6 complete all as specified and directed.

M & L for 15 mm thick full bull nosing, fully vitrified step tiles as riser & steps and skirting in full length in single piece with 3 to 4 embossing line of stair width laid cement screed and jointed with grey cement slurry mixed with pigment to match the shade complete all as specified and directed.

M&L for 16-18 mm thick Granite of Z-black in colour (table rubbed and polished) as in windows cill, door cill, gate pillar/post & cooking platforms and like in cement mortar (1:4) in matching thikness including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M & L Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall, beams and columuns in floors, roofs, shelves and stair case etc complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab where required/directed by Engr-in-Charge after applying cement slurry for filling undulationations/ level course finished even and smooth without using extra cement complete all as spd and directed.

M&L for rendering, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.

S&F 105mmx60mmx2mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F powder coated aluminium frame for windows, ventilators and kitchen cupboards frame size 100x44mm and 2mm thick with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified. Jindal/ HINDALCO/ INDALCO (Weight of section should not be less than 1.12kg per complete all as specified and directed. Note ;cost of rubber and required accessories shall be included in the quoted rate of item and shall not be paid extra.

S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed.

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work for WHB cabinet complete all as specified and directed.

S&F for 18-19 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain white lamination as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 1mm for inside plain white type & 1.5 mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners.

S&F for 16 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain white lamination as in cupboard shelves & partitions including powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastner also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets .

S&F for 35 mm thick factory made wooden modular door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F for 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge shall be measured and paid for separately.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of GE. Make :- Surya Fibre glass Industry, Everest composite Pvt Ltd., Pyramid FRP door Pune

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. Make :- Surya Fibre glass Industry, Everest composite Pvt Ltd., Pyramid FRP door Pune

M&L for preparation of old wooden surfaces hand rail of railing of any description over 10cm width or girth and applying two caot of french polish complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size designed pattern chromum plated handle completed all as specified and directed.

S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F 300mm size ordinary mild steel, rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair completed all as specified and directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S & F for stainless steel glossy finish peg set of five tier with necessary fitting complete all as specified and directed.

S&F for 1.2mm thick aluminium anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 1000 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.Make :- Sintex(Pure), Vectus(Smart/Safe), Supreme(Pure white) complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.

S & F in repair of 15 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.

S&F GI tubing of 15 mm bore, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors complete all as specified and directed.

S&F GI tubing of 20 mm bore, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors complete all as specified and directed.

S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed. Model : Cat No 91072 Orchid of Hindware , Parryware Cat No C0483, Cera Cat No FLS-WHT-0575

S&F for fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed. Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2013451

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified and as directed.

S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. Model No: F 7010305 of Cera , Hindware Model No F160006 , Parryware Model No T9985 A1

S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed. Model : FUS 29037 Fusion of Jaquar, Parryware model No G2304A1, Cera model No F1014151

S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete all as specified and directed.

S&F in repair 15 mm dia bore PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. Model : ARI -39053 of Jaquar,Hindware Model No F320006, Parryware Model No G4907A1

S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed. Model No :- ACN -1181N of Jaguar ,Cera Model No F5006101, Parryware Model No T6008A1,

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair vitreous china wash down water closet single piece-WC (cascade pattern ) with UF seat cover, hinge, fixing accessories, cistern fittings, size 655x665x760, S trap-300 white, including connection to drain pipe etc complete all as specified and directed. Jaquar CAT No LYS-WHT-38851S300UFSMN, CERA-S1013178,

S & F 15mm dia brass chromium plated health faucet with 1.00 mtr long flexible tube and wall hook screwed for iron pipe fancy type long body and hanging arrangement complete all as specified and directed. Model :- ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1

S&F in repair PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair stainless steel plate rack size 90cmx80cmx25cm made with 1mm thick steel incl taking out existing wooden plate rack complete all as specified and as direcetd.

S&F for 0.8mm thick stainless steel sink double bowl size without drinage board in graceful glory range, anti-scratch stain finish of popula range kitchen sink overall size 990x459mm, double bowl size 400x340x200mm incl waste pipe & SS coupling, washer etc complete all as specified and directed. Model Parryware Cat No C857081 Cera No B 4513201.

S&F in repair fancy type 15mm bore chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connected to pipes complete all as specified and directed.

S&F in repair 20 mm dia Stanless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.

Dismantling timber scantlings(unframed) in any section, in any position complete all as specified and directed.

Dismantling structural steel work including I section girders complete all as specified and directed.

M&L for treating the bottom and sides of excavation with anti termite solution at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed.

M&L hardcore( Broken Bricks ) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick main cement concrete 1:3:6 type C2( using 40 mm graded stone aggregate ) in foundatin filling and mass concrete complete all as specified and directed.

M &L for 510x90x20mm hardwood (Teak) wooden flooring over 1218x1218x22 mm sound dampner (made of 20mm compressed wood fibre cement composite 1250kg/m3 and 2mm dampner sheet (37 STC for 12mm as per IS9901-III/ISO: 140-3/ASTM 90/413) over 12mm thick FR plywood on wooden frame 300x300 mm C/C with 50x1000 GSM absorb wool all as specified and directed.. (Make: Himalyan Accoustic/HERA DESIGN/BAUX)

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6,including dismantling of existing tiles complete all as specified and directed

E&M Part: Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down existing unserviceable Main switch/ cut out/ DBs of any type & capacity including making good distrubed surfaces to match with the existing surfaces of walls complete all as specified and directed.

Taking down carefully by sub main wiring of any size complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm cable, PVC unsheathed and insulated copper multistranded conductor, FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch down through and including PVC concealed conduit with all accessories including 1.5 Sqmm copper multistranded conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell/exhaust fan point controlled by one switch/bell push complete all as specified and directed.

All as per item No. 104 above but one 5 Pin, 5 Amps, switch socket outlet point controlled by one switch on independent board

All as per item No 104 here-in-before but for 5 Pin, 5 Amps socket outlet point controlled by one switch on same board.

All as per item No 104 above but One buzzer/bell point controlled by one switch.

All as per item No 104 above but One lightl point controlled by 2, two switches

All as per item No 105 here-in-before but with for one 15 Amp 6 Pin switch socket outlet independent with 2.5 Sqmm, PVC insulated, sheathed cable and 2.5 Sqmm cable for earth wire for one 5 Pin socket out let 15 Amps.

S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, One way complete all as specified and directed.

S & F Socket outlet, polycarbonate, 2 in 1, 3 Pin Amps, 5 Pin, multipurpose, flush type complete all as specified and directed.

S &F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed

S&F Switch Socket combination 6 pin , 2 in 1, 3/5pin, 5/15 Amps, flush type, (Multi purpose), 230Volt complete all as specified and directed.

S&F bell push piano flush type 5 amp single pole one way complete all as specified and as direcrted

S &F switch piano flush type polycarbonate two way 5/15 Amps complete all as specified and directed

S&F bell ding dong type AC 230 volt single pole complete all as specified and as direcrted

S&F of ceiling rose PVC polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.

M & L for replacement of Step regulator electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete & all as specified and directed.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Tube light fittings 1X/10 Watt,(T-8) 2' long 220V, AC decrotive box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.

S&F LED Tube light fittings 1X/20 Watt,(T-8) 4' long 220V, AC decrotive box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.

S&F indoor decorative LED city-3 light fitting suitable for 12 Watt retrofit LED lamp B-22 base with polycarbonate body with upper globe complete including single 12 Watter LED lamp complete all as specified and directed.

S&F LED Lamp 12 Watt 230 V AC integrated circuit complete all as specified and directed.

Refixing old serviceable retrived light fittings in any description and capacity complete all as specified and directed.

Supply & Fixing security light fiting, LED type, 20 watt,6000K, pressure die cast housing with prismatic polycarbonate diffuse & indvl LEDs as light source with integrated electronic driver complete with M & L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50x6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiing rose to connected of street light complete as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed, multistranded copper conductor of nominal cross sectional area 6.0 Sqmm alongwith one run of FRLS, PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 Sqmm as earth continuity conductor drawn through & including PVC conduit of suitable dia.complete all as specified & as directed. Note : 2 runs of 6 Sqmm PVC insulated multistranded copper condustor + 1 run of 6 Sqmm PVC copper conductor used as earth wire + 1 run of PVC conduit shall be measured as one unit

Taking down Ceiling fan of any size any capacity such as replacement complete all as specified and as directed.

Taking down and testing repairing and replacement of necessary item such as winding, bearing, bush, shaft, rubber reel etc of ceilling fan 1200/1400mm sweep and reflxing carefully of the same by providing connected accessories such as washers, pins, top & bottom conopy, down rod and removing the rusted area with emery paper and spary painting of existing colour including connecting up with three core flexible PVC insulated copper conductor (multistranded ) cable of size 1.5 sq mm from ceiling rose to fan testing complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 300mm incl making suitable size hole with all fixing arrangement asreqd at site for fixation o fthe same and making good to distubed surfaces of wall and match with existing and connected with 3 core copper cable multitranded 1sq mm from ceiling rose to fan complete all as spdand directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safely valve, themostate, NRV, hot and cold copper/PVC connection of suitable size as reqd at site and grouting alloy fastender or fully threaded bolts with nuts and connection complete all asspdand dircted.

Fixing only serviceable DB 8 way with MCN SPN and MCB SP complete all as specified and directed.

S&F MCB, SPN, upto 63Amps 240V, 10kA, B curve complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 240V complete all as specified and directed.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete including taking down old unsv all as specified and directed.

Supply and fix sheet metal enclouser DB 415V vertical with provn for mounting MCCB 125 Amps IP 54 double door flush sheet metal enclosure DB 4 way 415V with double door protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neural links complete including taking down old unsv all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16KA 415V 'C' curve complete all as specified and directed.

Taking down existing iron/wooden box of any size and description complete all as specified and directed.

Supply and fix Meter box flush on wall of suitable size as existing space made out of CRCA sheet of 2mm thick indoor type totallty enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement with angle iron frame alround panel body duly grouted on wall, having inner shell for fixation of SPN DB 8 way and space for fixing single phase KWH meter of suitable capacity 01 Nos, Copper lugs, spacers, Mounting Channel, rubber gasket, locking knobs, Hylam sheets pieces, PVC shrinable connections, suitable compartments and epoxy powder sparay painted with one coat primer complete including taking down existing Note: All connection with wiring with 6 sq mm PVC insulated single core multisranded coppper conductor drawing through PVC flexibe conduit and connected with appropriate size copper thimbles.

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

Returning , filling in including spreading, leveling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

M&L for laying bricks, sub class 'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 25 Sqmm 4 core complete all as specified and directed.

S&F galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx 3.15mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanised iron strip 32x6 mm by means of bolts, nuts, check nuts and brass washer all as shown in electrical plate No 03 of SSR Part-I connected to continuous earth wire on pole all as specified and testing on completion, including provision of earth strip protected by 40mm dia GI light grade protection pipe from earthing plate to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work in any type of strata & testing complete all as specified and directed. NOTE:- Tenderers may note that amount of credit Rs 1,02,130.00 will be deducted from the amount arrived, at the time f Acceptance of contract.

MOHINDER SINGH AND SONS

Shikhar ji Enterprises