Construction of Gauge Posts, Providing and Fixing of Sign Boards at various HO Sites in Beas under SHD, CWC, Shimla

Fabrication and Installation of Gauge Posts at river banks including cost of civil works in foundation embedded in 1:2:4 reinforced cement concrete pedestal block of size 60 cm x 60 cm x 60 cm including the cost of steel reinforcement, centering, shuttering, finishing, reinforcement over the 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc. complete (excluding retro reflective paints) Reinforced Cement Concrete gauge post of size 15 cm x 10 cm (one side tapered in 5 cm length) made with 1:2:4 concrete mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)-1.80 m long. (rates excluding retro reflective paints)

Supply and installation of Enameled gauge plates(10cm) on existing structure at riverbanks including cost of civil works and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black and white alternatively and red synthetic enamel of 5 mm width at every 100 mm complete

Painting/Marking of gauge (Water Level) on bridge piers and abutments with synthetic enamel of approved brand & manufacture to give an even shade by two or more coats and marking the gauge with Japan paint Red, Black and White with standard metric gradation marking of 5 mm thickness in black & white alternately & Red synthetic enamel of width 5 mm at every 50 mm etc complete Upto 10m depth

Painting/Marking of gauge (Water Level) on bridge piers and abutments with synthetic enamel of approved brand & manufacture to give an even shade by two or more coats and marking the gauge with Japan paint Red, Black and White with standard metric gradation marking of 5 mm thickness in black & white alternately & Red synthetic enamel of width 5 mm at every 50 mm etc complete Upto 30m depth

Installation of Retroreflective Sign Boards consists of an MSsheet of size 1200 mm × 1000 mm, mounted on two 40 mm diameter light-weight hollow circular pipes. The supports are fixed in a 1:2:4 concrete (M15) foundation with brick soiling at the base. The structure stands approximately 2.0 meters above ground level, with the backside strengthened using welded MS framing for stability and durability.