Construction of Sidhpurghar Bhallad road km. 0/0 to 6/850 including bridge over Naad Khad at RD.4/990 in Tehsil Jawali District Kangra (HP) under Nabard RIDF-XXVI

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required line, grades cutting and trimming of side slopes , camber, super elevation and level shown as per the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification clause section 300 and 1600 sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transporation including head load or animals transport or by mechanical means along with its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidential necessary to complete the work by mechanical means /labour if required. All useful materials such as stone, shingles, aggregates, sand and slates etcetera shall be sorted out and stacked in proper stack . Recovery of stones to the tune of 3200.38 cubic metre quantity at the rate of Rupees 300/- (Rupees three hundred) only per Cubic Metre shall be effected from the contractor running bills on pro-rata basis as per quantity actually executed. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drains and foundations of all other structures, graded and compacted in 200mm (two hundred milimetres) thickness with Three Wheel Roller 80-100 (eighty-hundred) KN static weight roller to meet the requirement of tables 300.1 and 300.2 as per M.O.R.D. technical specification section 300 and 1600 including carriage of materials within all leads and lifts and other incidental and as per the entire satisfaction and direction of the Engineer- In –Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera and other similar structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) complete in accordance with the line and dimensions shown in the drawings as per M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to be original surface in layer not exceeding 150mm (One hundred fifty milimeter) compacted thickness including shoring, strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and quantum of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in for all type of structure nominal mix 1:4:8 ( One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty millimeter) nominal size on ground in or under water and curing complete including pumping or bailing out water , dewatering (surface and sub soil water) and removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in retaining wall, breast wall etcetera as per drawings and M.O.R.D. technical specification section 800,900 and 1600 as per the direction and entire satisfaction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing wall return walls, and retaining walls/ Breast walls complete as per drawing and MORD technical specifications section 1200, 103.5 and 1600 as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 100mm ( One Hundred millimeter) dia ISI marked PVC pipe in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls extending through the full width of the structures with slope of 1(V): 20(H) towards drawing face complete as per drawing and M.O.R.D. technical specifications section 700 and 1200 as per direction and entire satisfaction of Engineer – in- Charge, including the cost of collar etcetera complete, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain concrete in sub structure for all type of structure complete of concrete grade M-10 ( M Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 40mm ( Forty millimeter) nominal size on ground or under water including pumping or bailing out water / dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths and curing complete including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 in toe wall etcetera as per the direction and entire satisfactions of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) on ground or under water including pumping or bailing our water/ dewatering surface and sub soil water and removal of the slush which may arise at the time of laying concrete for all heights/ depths (concrete cradle) type-A bedding as per drawings and M.O.R.D. technical specifications section 800,900 and 1100 including the cost of form work and curing complete including carriage of materials within all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) in sub structure such as parapets abutment and as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 including the cost of form work and curing complete including carriage of materials with in all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for reinforced concrete in sub structure design mix R.C.C. grade M-20 (M-twenty) with graded crushed stone aggregate 20mm (Twenty milimetres) nominal size having cement contents not less than 330kg (Three hundred thirty kilogrammes) per cubic metre and curing complete for all heights/ depths including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, dirt wall, as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 complete including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 R.C.C. Grade M-25 (M-twenty five) design mix cement contents not less than 400 kg. (four hundred kilogrammes) per cubic metre with 20mm ( twenty millimeter) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in etcetera as per the direction and entire satisfactions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bars reinforcement in super structure complete as per drawing and MORD technical specification section 1000 and 1400 including cutting, bending binding and placing in position complete in all respect including cost of binding wire as per directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bars reinforcement in sub structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental .The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of in reinforced cement concrete mechanically mixed and vibrated railing of Grade M-25 (M- twenty five) design mix with cement content not less than 400kg (four hundred kilogrammes) per cubic metre using 20mm (twenty milimetres) nominal size graded stone crushed stone aggregate with cast insitu vertical post and precast horizontal post (Top middle and bottom) as per drawing true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeter) screening adequate space, between vertical post for expansion complete, including the cost of reinforcement and form work as per drawing and MORD technical specification section 800, 900 1000 and 1200 complete in all respect as per direction and entire satisfactions of Engineer-in-Charge, Including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm (One hundred millimeter) dia galvanized mild steel down pipe with corrosion resistant structural steel grating complete as per drawing and M.O.R.D. technical specifications section 1400 and as per direction and entire satisfaction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete designed mix RCC grade M-30 (M-thirty) with cement contents not less than 430 kg. (Four hundred thirty kilogrammes) per cubic metre with graded crushed stone aggregate 20 mm ( Twenty millimeter) nominal size and curing complete in wearing course 75mm (Seventy five milimetres) average thickness including cost of form work and reinforcement complete as per drawing and M.O.R.D. technical specification section 800,900,1000 and 1400 as per the direction and entire satisfactions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structures Grade M-20 (M-twenty) nominal mix 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregate 40mm (Forty milimetres) nominal size in flooring on ground or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site or which may arise at the time of laying concrete complete for all heights/ depths including cost of form work as per Drawing and M.O.R.D. technical specification section 800, 900 and 1200 as per entire satisfaction and directions of the Engineer-in-Charge including haulage of material within all leads, lifts and other incidental charges. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-25 (M-Twenty five)designed mix with cement contents not less than 400 kg (four hundred kilogrammes) per cubic metre with 20 mm ( Twenty millimeter) nominal size graded crushed stone aggregate and curing complete in approach slab including the cost of reinforcement and form work complete as per drawing and M.O.R.D. technical specification section 800, 900, 1000 and 1400 including carriage of materials within all leads, lifts and other incidental as per the direction and entire satisfaction of Engineer-in-Charge The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Earth filling in foundation, trenches as per drawing and as per MORD technical specifications section 300 earth filling including carriage of material within all leads, lifts and other incidental as per the entire satisfaction and directions of the Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying(to level or slope) 900mm dia (Nine hundred milimetre diameter) reinforced cement concrete heavy duty non pressure pipe IS class NP3 for culverts if First class bedding or granular material in single row including fixing collars with cement mortar 1:2 (One cement : two sand) and curing complete but excluding th cost of excavation, protection work, back filling, concrete bedding and masonry work in head walls and parapets as per Drawing and MORD technical specification section 1100, including hauling of material within all leads, lifts and other incidental charges and as per the entire satisfaction and directions of the Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain concrete in open foundation for structure like drain complete of grade M-10 ( M- Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 20mm ( Twenty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of layingconcrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction and entire satisfaction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm (Three hundred milimetres) below the sub grade level watered, graded with motor graded and compacted in layers to meet requirement of tables 300.1 and 300.2 with power road roller 8-10 Tonne (eight desh ten tonne) capacity for sub grade construction as per M.O.R.D. technical specification section 300, and as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with in all leads and lifts transporting to site, spreading grading to required slope and compacted with three wheel 80-100 (eighty-hundred) KN static roller to meet requirement of table 300.1 and 300.2 as per M.O.R.D. technical specifications Clause 407, including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying granular sub base by providing well graded material as per table 400.1 spreading in uniforms layers with tractor mount grader on prepared surface and mixing by mix in place method with rotavator at OMC and compacting with smooth three wheel roller 80-100 (eighty-hundred KN static roller to achieve the desired density complete as per MORD technical specifications section 400 for grading-I material including carriage of materials within all leads, lifts and other incidental charges. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanical means stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two milimetres) size for Grading-II at the rate of 0.20 (zero point two zero cubic metre per 10 sqmt (Ten square metre) of road surface and binding material of approved quality at the rate of 0.06 (zero point zero six) cubic metre per 10sqmt (ten square metre) of road surface to fill up the interstices of course aggregate, watering and compacting to the required density grading –II 63mm to 45mm ( Sixty three millimetres to forty five millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material within all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanical means stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two milimetres) for Grading-III at the rate of 0.18 cum ( zero point one eight cubic metres) per ten square metres, to fill up the interstices of course aggregate, watering and compacting to the required density grading –III 53mm to 22.4mm ( fifty three millimetres to twenty two point four millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government.

Providing and applying with BITUMEN emulsion (SS-1) on the prepared surface of granular base after and including cleaning of road surface with Hydraulic brooms and spraying primer with bitumen emulsion pressure distributer at the rate of 0.85 kg (zero point eight five kilograme) per square metre using mechanical means as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.275 kgs. (Zero decimal two seven five kilogrammes) per square metre on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification 500, as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimeter) compacted thickness, composed of 13.2mm ( thirteen decimal two millimeter) to 5.6mm ( five decimal six millimeter) aggregate at the rate of 0.27 cubic metre (Zero point two seven cubic metre) mixed with Bitumen VG-10 (Viscosity grade- ten) at the rate 14.60 Kilograme (fourteen point six zero kilograme) per ten square metre of road surface to the required line grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot Mix Plant of 30/40 (Thirty / Forty) tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty-Hundred) KN static road roller finished to required level and grades to be followed by seal coat complete as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and direction of Engineer – in- Charge excluding the cost of tack coat and seal coat including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying seal coat type-B for sealing the voids in a bituminous surface laid to the specified level, grade and cross falls using 0.06 ( zero point zero six) cubic metre of fine aggregate per 10 Sqm. ( Ten square metre) premixed with VG-10 (Viscosity grade ten) bitumen binder at the rate of 6.80 kg (six point eight zero kilograme) per ten square metre of road surface heated in Hot Mix plant and laying/ mannualy of mixed material and rolling with Three Wheel road roller 8-10 ( eight to ten) tonne capacity) as per MORD technical specification section 500 and as per the direction and satisfaction of Engineer-in-Charge, including carriage of material labour and equipment required to execute the work to the site of work complete in all respect The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government.

Earth work in structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling/wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.T.H. technical specification section 300 and as per direction of the Engineer- In–Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fiffty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete for all type of structure complete of plain cement concrete grade M-10 (M-ten) nominal mix 1: 3: 6 ( one cement: three sand : six graded crushed stone aggregate 40mm (forty millimeters) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete and complete for all heights/depths including the cost of form work complete in all respect as per drawing and M.O.R.T.H. technical specification section 1500, 1700 and 2100 as per direction of Engineer-In-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government. .

Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure Grade M-20 (M-Twenty ) designed mix with cement contents not less than 330kg (three hundred thirty kilogrammes) per cubic metres with 20mm (Twenty millimeters) nominal size crushed/broken stone aggregate in abutments, return walls (in sub structure) as per drawings and MORTH technical specification section 1500 and 2200 and curing complete including cost of form work but excluding cost of reinforcement including hauling of materials in all leads and lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforcement cement concrete in super structure grade M-30 (M- Thirty) design mix in super structure with cement contents not less than 407kg (four hundred seven kilogrammes) per cubic metre with 20mm (twenty milimetres) nominal size crushed/ broken stone aggregate as per drawing and MORTH technical specifications section 1500, 1700 and 2200 and curing complete including cost of form work but excluding cost of reinforcement for reinforced concrete in bed block and dirt wall etcetera, including hauling of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Furnishing and placing reinforced/ prestressed cement concrete in super structure as per M.O.R.T.H. technical specification section 1500, 1700 and 2300 reinforced cement concrete grade M-30 (M-Thirty ) mix designed having cement contents not less than 407kg (four hundred seven kilogrammes) per cubic metre with 20mm (twenty milimetres) nominal size crushed stone aggregate complete including the cost of form work, but excluding the cost of reinforcement for reinforced concrete work in deck slab and wheel gaurd etcetera and curing complete including haulage of material in all leads, lifts and other incidental and as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced Cement Concrete grade M-30 (M-Thirty) designed mix with cement contents not less than 407kg (four hundred seven kilogrammes) per cubic metre with 20mm (Twenty millimetres) nominal size broken/crushed stone aggregate in super-structure as per drawings and M.O.R.T.H. technical specifications section 1500,1600,1700 and 2700 including the cost of form work and reinforcement for reinforced concrete work in approach slab and curing complete including hauling of materials in all leads and lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) mix designed having cement contents not less than 407kg (four hundred seven kilogrammes) per cubic meter with 20mm (Twenty millimetres) nominal size crushed/broken stone aggregate and curing complete in wearing coat including cost of form work and reinforcement as per drawing and M.O.R.T.H. techinical specification1500, 1600, 1700, 2700 and as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts, other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of precast reinforced cement concrete mechanically mixed and vibrated railing of M-30 (Thirty) Grade, aggregate size not exceeding 12mm (Twelve milimetres) true to line and grade, tolerance of vertical reinforced cement concrete post not to exceed 1 in 500 (One in five hundred), centre to centre spacing between vertical post not to exceed 2000mm (Two thousand milimetres) leaving adequate space between vertical post for expansion complete as per drawing and M.O.R.T.H. technical specifications section 1500,1600,1700 and 2700 as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and M.O.R.T.H. technical specifications section 1600 and 2200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure complete as per drawing and M.O.R.T.H. technical specifications section 1600 and 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORTH technical specifications section 2200 clause 710.1.4 of IRC 78 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level heavy and steel Roller bearing conforming to IRC; 83 (Pt-I) section IX and section 2000 M.O.R.T.H. technical specifications complete including all accessories as per drawing and technical specification as per direction of Engineer-in-Charge and including carriage of materials within all leads , lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC; 83 (Pt-I) section IX and section 2000 of M.O.R.T.H. technical specifications section 2000 complete including all accessories as per drawing technical specification as per direction of Engineer-in-Charge, and as per directions including carriage of materials within all leads , lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty milimetres) thick compressible Fibre Board in expansion joints complete as per drawing and MORTH technical specifications section 2600, as per direction and entire satisfaction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of burried expansion joint, expansion gap being 20mm (Twenty milimetres) covered with 12mm (twelve milimetres) thick, 200mm (two hundred milimetres) wide galvanised weldable structural steel plate as per IS:2062 placed symmetrically to centre line of the joint, resting freely over the top surface of the Deck concrete, welding of 8mm (eight milimetres) dia 100mm (one hundred milimetres) long galvanised nails spaced 300mm (three hundred milimetres) centre to centre along the centre line of plate,all as specified as per M.O.R.T.H. technical specification section 2600 as per direction and entire satisfaction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government.

Providing and filling joint sealing compound as per drawing and technical specifications with course sand and 6% (six percent) bitumen by weight as per drawing and MORTH technical specifications section 2600 complete in all respect as per the directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced in sub structure for all type of structure complete for plain cement concrete Grade M-15 (M-Fifteen) design mix with minimum cement contents not less then 275 kg (Two hundred seventy five kilogram) per cubic metre levelling course below approach slab and curing complete including pumping or bailing out water dewatering and removal of slush as required at site which may arrise at the time of laying concrete for all height/depths including cost of form work complete as per drawing and MORTH technical specifications section 1700 and 2700 as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( Forty millimetre) nominal size, of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification of rural roads section 1700 ( ordinary kilometre stone precast). Including hauling / carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( Forty millimetre) nominal size, of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads section 1700 (200 metres ( two hundred metres ) stone precast). Including hauling/ carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( Forty millimetre) nominal size, of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification of rural roads section 1700 ( 5th kilometre stone precast) including hauling/ carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( Forty millimetre) nominal size in boundary pillars of standard design as per IRC : 25 (Twenty five) fixed in position including finishing and lettering and painting as per drawing and M.O.R.D. technical specification section 1700 and as per directions and entire satisfaction of Engineer-in-Charge . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of reinforcement cement concrete guide posts of 250mm (Two hundred fifty milimetres) dia M-15 (M-Fifteen) grade cast in-situ with 20mm (twenty milimetres) nominal size aggregate true to line and grade tolerance of vertical RCC posts not to exceed 1 in 500 (One in five hundred) as per drawing and MORD technical specification section 1700 as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm ( twenty five millimeter into twenty five millimetre into five millimeter). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Numbers) 75mmx75mm (seventy five millimeter into seventy five millimeters) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level the top most diamond plate will be welded to middle plate by 47mmx47mm (Forty seven milimetre into forty seven milimetre) of 125 WG (One hundred twenty five wire gauge) steel tube plate. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 as per direction and entire satisfactions of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of 600mm (Six hundred milimetres) equilateral Triangle cautionary, mandatory and informatory sign board as per IRC:67 made of encapsulated lens type reflective sheeting vide M.O.R.D. technical specifications section 1700 fixed over aluminum sheeting 1.5mm (One point five milimetres) thick supported on G.I. pipe 50mm dia (Fifty milimeter) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade nominal mix 1:2½: 5 (One cement : two and half sand : five graded crushed/ broken stone aggregate 20mm (Twenty milimetres) nominal size) cement concrete 450mmx450mmx600mm (Four hundred fifty milimetres into four hundred fifty milimetres into six hundred milimetres) and 600mm (Six hundred milimetres) below ground level as per MORD technical specifications section 1700 including painting, on G.I. post with primer and two coats of epoxy paint including hauling/ carriage of materials in all leads, lifts and other incidental or as per entire satisfaction and direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, or other taxes imposed by the Government.

Providing and erecting directions and place identification retro reflectorised sign up to 0.90sqm (Zero decimal nine zero square metres) size as per IRC:67 made of encapsulated lens type reflective sheeting vide M.O.R.D. technical specifications clause 1701.2.3 fixed over aluminum sheeting 2mm (Two milimetres) thick supported 50mm (fifty milimetres) diameter G.I. pipe firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade 1:2½: 5 (One cement : two and half sand : five graded crushed/ broken stone aggregate 20mm (Twenty milimetres) nominal size) cement concrete 450mmx450mmx600mm (Four hundred fifty milimetres into four hundred fifty milimetres into six hundred milimetres) and 600mm (Six hundred milimetres) below ground level as per drawings and MORD technical specifications section 1700 including painting of G.I. posts with primer and two coats of epoxy paint including hauling/ carriage of materials in all leads, lifts and other incidental or as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, s GST or other taxes imposed by the Government.

Painting lines, dashes, arrows etcetera on roads in two coats on new work with readymixed road marking paint confirming to IS:164 on bitumineous / concrete surface including cleaning the surface of all dirt, dust and other foreign matter demarcation at site and traffic control complete as per approved drawing and MORTH technical specifications section 1700 or as per the entire satisfaction/ direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

rajat thakur govt contractor

Nishchal Mahajan

V S SAINI