Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC VILL MANOH P O BASSI TEH JOGINDER NAGAR DISTT MANDI H P | JOGINDER NAGAR | MANDI | HIMACHAL PRADESH | L1 | Accepted-AOC Awarded | |
| 2 | L2₹5.8 L+₹17,790.40 (3.16%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹5.9 L+₹23,483.30 (4.17%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹5.9 L+₹26,171.05 (4.65%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹7.4 L+₹1.8 L (32.0%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹7.5 L
EMD Value
₹14,950
Closing Date
27 Aug 2024, 9:00 amClosed
Executive Engineer Jal Shakti Division Shillai
Executive Engineer Jal Shakti Division Shillai
C O 2 Nos RCC Intake Chamber, Storage Tank 48000 liters capacity and laying and Joining of GMS Pipe line in distribution system.
2024_HPIPH_91896_1
SHL-SMR03-780-JSV DIV-SHILLAI3754-3800 Dt 16.08.2024
Open Tender
Civil Works
Item Rate
120 days
SHILLAI
Please refer Tender documents.
9 documents required · 9 mandatory
₹250
Executive Engineer Jal Shakti Division Shillai
₹14,950
Yes
14 Nov 2024
16 Aug 2024
27 Aug 2024
16 Aug 2024
27 Aug 2024
16 Aug 2024
Amount
Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge.
Providing and laying cement concrete 1:4:8(1cement:4approved sand:8app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
Providing and laying cement concrete 1:1.5:3(1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Foundation and plinth including entire carriage of material upto all leads and lifts.
Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage ofmaterial upto all leads and lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-
Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc., up to 200mm in thickness.
Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge .including entire carriage of material upto all leads and lifts.
Providing and laying reinforced cement concrete work 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate 20 mm nominal size ) excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers upto floor two level in all heights and depths includiing all leads lifts and carriage of material at site and as directed by the Engineer Incharge.
Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
Providing and fixing MS sheet manhole cover of600 X 600mm to existing storage tank made of angle iron 40mm x 4mm base plate and manhole frame 35mm X 35mm X 4mm with MS sheet 2mm thick including cutting, welding, red lead paint and locking arrangement with lock complete including all leads, lifts and carriage of material at site and as per the direction of Engineer Incharge.
Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge.
Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia including providing and fixing tube fittings such as reducer increasers, sockets, union,tees,bends etc. where ever required (earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
40mm dia (Light grade)
Manufacturing and supplying of GI pipes manifold distibuter (common header) vertical with 65mm dia.(G.I. pipe) by cutting and welding the distributer shall be 50cm long having 4 Nos 15mm dia connection at the top with 10'' long nipple of 15mm dia. G.I. pipe both side & providing elbow 15mm, 25mm, 32mm dia. bottom inlet by propely plunging at the top with socket and with MS sheet 3.15mm thick at the top bottom including all leads, lifts and carriage of materials and as directed by the Engineer Incharge.
Providing and fixing G.I. Nipple 15mm dia. conforming to IS-778 of following dia including all leads & lifts and as per direction of the Engineer- in-charge.
SUNIL KUMAR CONTRACTOR
BHAW SINGH KAPOOR CONTRACTOR
MAM RAJ KAPOOR
PRAVESH KUMAR CONTRACTOR
SUNIL THAKUR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .