Remodeling of LT Overhead Infrastructure to Underground System for Block-A,B and C at Sector-47, Noida

Main Feeder LT Panel- Type A:-Supply, Installation, Testing and commissioning of Outdoor type Double Door Cubical Type free standing totally enclosed dust & Vermin Proof LT Panel suitable for 440Volts, 3 Phase ,50HZ AC Supply system of suitable size fabricated in compartmentalized made from CRCA sheet steel of 14/16SWG,FActory made, Cubical type with base, with powder coated ,having suitable Bus Bar for 630 Amp. Aluminium Bus Bar of high conductivity with PVC Sleeves, DMC/SMC Bus Bar supports, entire Panel shall have 2 nos. earth stud, and control wiring of 1.5sq mm PVC insulated Copper Conductor Cable, Cable Alley Bus Bar Chamber Cable Gland Plate.Incomer: 630A 4P 36kA MCCB Microprocessor Release with O/L,S/C,E/F protection, confirming to IS/IEC60947-2 etc. - 01 No. Multifunction Meter, CT, Control MCB, LED Phase Indication, Control wiring. Out Going :-400A 4P 36kA MCCB Thermal Release with On LED Indication -6 nos.

Sub Feeder LT Panel:- Supply, Installation, Testing and commissioning of 12 Way Outdoor type Double Door Cubical Type free standing totally enclosed dust & Vermin Proof LT Panel suitable for 440Volts, 3 Phase ,50HZ AC Supply system of suitable size made from CRCA sheet steel of 14/16SWG,FActory made, powder coated ,having suitable Bus Bar for 400 Amp. Aluminium Bus Bar of high conductivity with PVC Sleeves, DMC/SMC Bus Bar supports, entire Panel shall have 2 nos. earth stud, and Gland Plate cable supporting chanel inside the Pnel. The bottom pedestal of pillar provided with 50x50x6 M. S. angles of 400mm height to give solid strength to the pillar boxes and easy entry of cable from bottom. Incomer:-400A 4P 36kA MCCB Microprocessor Release with O/L,S/C,E/F protection, confirming to IS/IEC60947-2 etc. - 02 Nos. 400A 4P On Load Change Over Switch Multifunction Meter, CT, Control MCB, LED Phase Indication, Control wiring. Outgoing :-100A Porcelain base fuse holders with silver plated, copper contacts of suitable rating. - 12 nos. On each phase. Neutral Busbar at bottom with hole and nut bolt for cable termination

Supply, laying, terminating, connecting, testing, commissioning of LT XLPE aromoured, aluminum conductor cable 1.1KV grade, in trenches/on existing cable trays/walls including the cost of GI saddles, gutties, GI clamps, etc. complete as required of the following sizes. Tagging on both the ends will be done with aluminum tags etc. complete as required. UPPWD-2018, PS-501 a) 3½ Core x 400 sq.mm. (Make-Havells/Grandley/Polycab/ Diatron/Gloster)

3½ Core x 300 sq.mm.

3½ Core x 240 sq.mm.

3½ Core x 150 sq.mm.

3½ Core x 120 sq.mm.

3½ Core x 95 sq.mm.

3½ Core x 70 sq.mm.

3½ Core x 50 sq.mm.

3½ Core x 35 sq.mm.

3½ Core x 25sq.mm.

4 Core x16 sq.mm.

4 Core x 10 sq.mm.

4 Core x 6 sq.mm.

2 Core x 10 sq.mm.

2 Core x 6 sq.mm.

Supplying and making end termination with brass compression glands of following sizes of 1.1 kV grade multicore aluminium condcutor PVC insulated and PVC sheathed. DSR-2018 9.1 a) 3½ Core x 400 sq.mm.

3½ Core x 300 sq.mm.

3½ Core x 240 sq.mm.

3½ Core x 150 sq.mm.

3½ Core x 120 sq.mm.

3½ Core x 95 sq.mm.

3½ Core x 70 sq.mm.

3½ Core x 50 sq.mm.

4 Core x 35 sq.mm.

4 Core x 25 sq.mm.

4 Core x 16 sq.mm.

4 Core x 10 sq.mm.

2 Core x 10 sq.mm.

2 Core x 6 sq.mm.

Supply and burying of 600mmx600mm x 6.0mm G.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. wire and pope will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick all round etc. as per direction of Engineer-in-charge complete in all respects. PS_702

Supplying and burying of 600mm x600mm x3mm copper plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. wire and pope will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick all round etc. complete in all respects. PS-704

Supply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for lightning conductor complete in all respects (for two storeyed Buildings).. PS-713A

Supply and fixing of vertical down conductor of 32mm x 6mm copper strip etc. on approved clamps on surface for lightning conductor complete in all respects (For two stroreyed buildings).PS-714A

Providing and fixing 25 mm x 5 mm size of copper strip with PVC insulated sleeves in 40 mm dia G.I. pipe from earth electrode as required. DSR 5.10

Providing and fixing 25mm x 5 mm copper strip with PVC insulated sieeves on surface or in recess for connections etc. as required. DSR 5.14

Providing and fixing 25mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR 5.15

Providing and fixing earth bus of 50mm x 5mm copper strip on surface for connections etc. as required. DSR 5.20

Providing and fixing 25mm x 5mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.DSR 5.11

Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.PS-721

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. DSR 12.40

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.DSR 12.42

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. PS.No.647 (Make : Bajaj/Philips/Crompton/Valmont/Transrail)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.90 mm dia (OD-90 mm & ID-76 mm nominal) DSR14.16.2 (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

Supplying and laying of DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete asrequired.DSR 18 14.16.1. 63 mm dia ( OD-63 mm & ID 51 mm nominal) (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA PS.No-1423 (Bajaj/Philps/Havells/Crompton)

Underground/Over ground Laying of HDPE Pipe OFC /Power /Data/Coaxial Cabal Complete with all accessories as required

HDPE Duct (40 mm) Complete with all accessories as required

S/Laying of 120 mm dia (OD-120 mm & ID-103 mm nominal) size of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects. (DSR 2018 item no. 14.16.3 page no. 49) (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

S/Laying of 120mm dia of (DWC) HDPE Pipes ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with across the road by Drilling of 150mm dia at minimum 1Mtr. below the road levelthere by doing the work of providing DWC pipe by Trenchless method.. Complete in all respects. (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

S/Laying of 90 mm dia (OD 90 mm & ID 76 mm nominal) size of (DWC) HDPE Pipes ISI marked along wigh all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete for drawing of power cable across the road by drilling of 120mm dia at 1Mtr. below the road level there by doing the work of providing DWC pipe by manual Trenchless method. with filling and cutting, jointing etc Complete in all respects (Make-CPE/Duraline/Rex/Times/Narender Plast/Pioneer)

Providing and Laying of 200mm dia 6mm thickness through trenchless method including jointing of pipe,excavation of thrust pit and receiving pit of required size, cutting and repairing of road with all T & P and the GPS report submitted by the tenderer before excavation & back filling with compaction complete as per specification by H.D.D machine method. Pipe will be installed at minimum depth 2M to 3M below the ground surface or downward as per site condition in required slope. (AOR)

Supply of following type high conductivity aluminium strand compacted circular conductor XLPE armoured 11 KV Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment at a depth of 900 mm. below ground level over a cushion of 100 mm. thick sand around and protect with brick on sides and top of cable shall be properly connecting with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. (Gloster/Universal/Polycab/ Havells/Diacab make). i) 185 Sq.mm. 3 Core (AOR)

ii) 120 Sqmm x 3 core (AOR)

Laying of One number PVC insulated and PVC sheathed/ XLPE power cable of 11KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.(DSR elect 2018 Item.N. 8.3.2/P31) Above 120 Sqmm and upto 400 Sqmm

S/F of jointing of following sizes outdoor/indoor type 11 KV jointing kit heat Shrinkable type for 11 KV Cable including cost of all material, labour, T&P etc. for proper completion of the E/I. (Raychem/Denson Make) uperc Pg-29. 185 Sq.mm.

120 Sq. mm (UPERC- Pg-27)

S/Making of Straight through joint suitable for 185 sq.mm x 3 core 11 KV armoured cable as per ISS & complete as per the direction and satisfaction of E/I (Raychem, Denson, Cabseal Make) UPERC 2019 Pg-29

11 KV RMU Panel (3 Way RMU):-Design manufacture testing at works supply, installation testing & commissioning of 3 panel Board 11KV, Indoor tree standing, floor mounting totally enclosed mela clad VCB insulated comprising of 1 Nos 11KV isolater load break switch and 2 Nos Vaccum circuit breaker as outgoing enclosed in robotically laser weided non-extensible type stainless steel SF6 VCB enclosre with Self Powered relay (IDMTL O/C +E/F) as HT switchgear including suitable transformer protection relays, metering, indicators push buttons, copper busbars, etc as per the requirement complete as required The fault with stand capacity shall be minimum 20KA for 1 second including four cable entries for two incoming cable and two outgoning cable glands and lugs suitable for 2x 240/185 sqmm XLPE armoure cable. Incomer shall be provided with 630A Manual Load Bread / Fault Make switch, integral Earthing Switch with making switch, "Live Cable" Indicating LEDs energized thru Capacitive Voltage Deviders, Transparent Viewing window for verification of Earthing, Right Angle terminal protectors / Boots, Electrical & mechanical indications as required, Outgoing feeders: Two nos. Vaccum circuit breakers with the following

SF-6 insulated 630A Circuit Breaker, integral Earthing Switch with making switch, Emergency Trip Push Button, Electrical & mechanical indications as required, Shunt Trip coil for external trip signal, "Live Cable" Indicating LEDs energized thru Capacitive Voltage Dididers, Transparent Viewing window for verification of Earthing, Right Angle terminal protectors /Boots, IDMT relay for Circuit Breakers self powered, Merlin Gerin type VIP35 or equivalent with required protection CTs of suitable ratio, Cable box for incoming and outgoing shall be suitable for icrminating, 11KV, XLPE insulated Aluminium conductor armoured cables, One set inbuilt DC power pack , Transformer protection relays as required as per SLD. Complete in all respects (AOR) (Make-ABB, Schiender, CG Power, Seimens)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PS. No. 807 f (ii) 40 A TPN

S/F of Sintex Junction box No IIGSSJB2817 of size 240x130x110mm. Complete in all respects as per direction of E/I (AOR)

S/F of Copper Cable of size 2.5 mm x 3 Core. Complete in all respect (AOR)

Providing and fixing of precast reinforced cement concrete 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stonre aggretage 20mm nominal size) Kilometer stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work concrete in foundation, painting and lettering etc which slal be paid for separately (AOR) (Size 35x111x2.5 cm)

Finishing with epoxy paint(two or more coats) at all location prepared and applied as per manufacturer's specifications incuding appropriate priming coat, preparation of surface etc. Complete on concrete work (AOR)

Lettering with black japan paint of approved brand and manufacturer (AOR)

Taking out existing CC interlocking paver blocks from footpath/ ce

ntral verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.Complete in all respect as per direction of E/I. (AOR)

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). Complete in all respect as per direction of E/I. (AOR)

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer if filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer-in-charge. (Civil AOR) P-20

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Complete in all respect as per direction of E/I. (AOR)

Brick work with FPS bricks of class designation 100 in foundation and plinth in cement moartar 1:4 Cement mortar 1:4 (1 cement : 4 coarse sand). (AOR)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 Fine Sand). (SOR)

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required (a) (Bituminous Portion) (AOR)

(b) Water Bound Macadam (AOR)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required .(AOR) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (AOR)

Demolishing cement concrete manually/ by mechanical means including disposal of material with in 50 Mtr. Lead as per direction of E/I. Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix) Complete in all respect as per direction of E/I. (AOR)

P/F of G.I. Chain Link fabric fencing of required width in mesh size 50x50mm i/c strengthning with 2mm dia wire or nuts, bolts and washers as required. Complete as per direction of E.I. Made of G.i. wire of dia 4mm PVC Coated to achieve outer dia not less than 5mm in required. Colour and shade (AOR)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level -a)- 1:5:10 (1 Cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size). (AOR)