Restoration, Improvement and Refurbishing of Chowkidar Hut at Mechanical Division Baramulla

Amount

Providing and Fixing of 16 mm thick Panelling (made of pine wood) upto 9' in height with rebated joints fixed with nails as per approved design & pattern by Engineer In Charge . The job also includes applying two or more coats of touch wood for finish inclusive of wastage.

Providing and fixing of frame work to be cut of 12 mm Layered ply sheet of maximum dimensions .The width of the frame work strip pieces should be 2" ,to be fixed at a distance of one sheet (12inch) from each other .

Providing and fixing of matching conical beading /cornics to the corners of the rooms to cover the cutting edges of the floor and walls.

Providing and laying of furnishing comprising of foam 12 mm thick and wall to wall carpet matting cut out from roll mating to custom size. The supplied foam mating is to be neatly dressed on borders and placed in position with SR adhesive .The job includes all leads lifts and carriages to Xen quarters. size of room =10'x12'=120sft

Fabrication, providing of hand stitched quilts sewed out of 100% white cotton fabric as filling material good quality covering material and high quality threads along with multicolored standard quality quilt covers. The quilt size should not be less than 210CmX180Cm

Fabrication, providing of hand stitched mattress sewed out of 100% white cotton fabric as filling material good quality covering material and high quality threads along with multi colored mattress covers. The quilt size should not be less than 160CmX120Cm

roviding of pillows (Poly-cotton) with polyesters fiber filling material of size(41X61) cm along with pillow covers

Providing of Cushion (Poly-cotton) with polyesters fiber filling material of size(41X61) cm along with cushion covers

Providing and fixing SS Curtain rods 30mm dia to be put in steel brackets by way of drilling holes inserting rawl ploughs 15mm long and brass screws ete complete of approved quality and reputed make (NSI)

Providing and Fitting of eyelet Curtains for windows in cotton polyester blend fabric solid maroon and black out transparency of size not less than (121x228) cm

Providing of standard quality Door mats of size 2’x3’ each.

Providing of Bucket (15Lts capacity ), with Mug

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ist quality Vitrified floor tiles conforming to IS : 15662 of minimum thickness 8mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundry, bottle green, black of any size as approved by Engineer in Charge in skirting, risers of steps and dodos over 12mm thick bed of Cement Mortar 1: 3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pinting in white cement mixed with pigment of matching shade complete.Size of tile 600x600 mm

15 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels((Granite(18mm) of any color or shade, Area of slab upto 0.5 sqm)

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Demolishing cement concrete 1:3:6 or richer mixmanually/by mechanical means including disposal of material within 50 mtrs lead as per dIrections of Engineer in charge. (w/shop Sub Division)

Cement concrete flooring 50mm thick with 20mm nominal size stone aggregate (crushed) of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete. (w/shop Sub Division)

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications over and including priming coat with water thinnable cement primer

providing, fitting and testing of vertical storage water heater (Geyser) of 25 ltr capacity complete with 2KW heating element and thermostat compleyte of Venus/Racolt or any other reputed make along with necessary PVC connections.

Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:a

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 470x420mm bowl depth 178mm as per I.S. 13983.

Providing and fixing of C.P brass wall mixer of approved quality

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

providing and fitting of faucet along with required connector and holder.

Providing and fixing 15 mm nominal bore C.P. brass 2 in 1 angle valve of approved make conforming to IS : 8931

Providing and fixing PTMT 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gmstowel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour

Providing and fixing PTMT Bottle Trap for Wash basin and sink:Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.

Providing and fixing Rectangular shape 1500x450 mm mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing fixed with CP brass screws and washers complete.

Providing and fixing P.V.C. waste pipe 32 mm dia for sink or wash basin including P.V.C waste fittings complete:

Renewing glass panes (Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm), with wooden fillets wherever necessary.

Providing and fixing 19 mm thick ( Flat pressed 3 layer ply board ) in cupboard , almirrah, work table, shelves with necessary nails, adhesive, screws, bolts, nut and washers.

Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws,locks and other fittings. Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked one side decorative and other side balancing lamination, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipe (PN-16 pipe , 20mm OD(SDR-7.4) conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fitting of 1 HP single phase Electric driven pump motor of reputed make.with necessary fittings including valves etc.(For Control room)

Repairs to existing G.I piping network of control room by way of providing and fiiting of necessary fittings wherver required.

SUHAIL AHMAD KHAN