Up-gradation of District Library cum Auditorium at Tezpur under CIDF

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. Including refilling(return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. And removal of surplus earth with all lead and lifts as directed and specified in the following classification of solids including bailing out water where necessary as directed and specified. (A) Upto a depth of 2.00 m below the existing G.L. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. b) Other then Guwahati city

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

P.C. C.WORK Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (i) Using Mixture machin A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. i) Using mixer machin N) without using admixture and plasticiser. M20 grade concrete or Prop. 1:1.5:3

B) In super structure from plinth level up to Roof level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) without using admixture ,plasticiser M20 grade concrete or Prop. 1:1.5:3

Timber Shuttering ( Form Work) Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. b) Using 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. b)Using 25mm thick plank

Columns, Pillars, Posts & Strut Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face b)Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. a) For depth not exceeding 1.0M. II) Using 25mm plank

Flat surface such as soffits of suspended floors,roofs,landing,cantiliver slab,chajjas,balconies and the like. a) Floors etc upto 200 mm in thickenss II) Using 25mm plank

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (a) In proportion 1:4.(1 cement:4 sand)

(II) In superstructure above plinth level up to Roof level. (a) In proportion 1:4.(1 cement:4 sand)

STONE MASONARY WORK Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (a) Random Rubble Masonry

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (I) In Sub-structure upto plinth level including dewatering if necessary (I) In Sub-structure upto plinth level including dewatering if necessary (b) In cement mortar in proportion 1:4. (1 cement:4 sand)

FLOORING AND FLOOR FINISH 25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a)Normal rang (Somany/Nitco/Orient/Jhonson make) ii) of size (600mmx600mm and above)

B)ON WALLS Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. B) VITRIFIED i)Normal range (Sizes 300 mm x 300mm and above) Somany made- Durastone (Unpolished heavy duty Vitrified Tiles) a) Premium

.Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sad of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer ad in proper level and grade ad compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and technical specification clause 1504 of MORD.

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15mm and finishing coat 5mm thick) b) In cement mortar 1:4

B) On fair side (backing coat 10mm and finishing coat 10mm thick) b) In cement mortar 1:4

`Extra over item no 6.2.1 to 6.2.3 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed ii) 20mm thick plaster b) In proportion 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. ii) 20mm thick plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster

HERITAGE FINISHING Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department. (a) Granules (Code : HGR)

GYPBOARD CEILING Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Celling section of .055 mm thicness having knurled web of 51.5 mm and two equal flanges of26mm each with lapin of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendiculer to the intermediarte channel at 457mm c/c ,9.5mm/12.5 mm taperde edge gypboard ( conformin to IS:2095-1982) is than screws at 230mm c/c.Scrwe fixing is done mechaniclly either with screw driver or drilling machin with suitable attachment. Finally the boards are to be joints and finished so as to have a flsh look which includes filling and finishing the tapered and square edges of the boards with joint paper tape and teo coate of drywall topcoat suitable for gypboard complete at all levels as specified and direction.( For light fittings,providing opening for doors,window,ventilators etc cut out made with frame of perimter channel supported suitable to be measured and paid separately where necessary) i) 9.5mm thick

ACOUSTIC APPLICATION Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm x 13mm/15mm thick to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm.Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed. A) Everest Designer Ceilings or euivalent as directed by the departement (Primered) A) Using 13mm thick celling tiles.

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing pre painted Galvalume Sheet (PPGL) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (iii) 0.50 mm thick

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

PELMET Providing and fixing 12mm thick and 150mm wide pelmet with 25mm dia wooden curtain rod and bracket including fixing with 15mmx3mm M.S flat 10mm long plugs complete. c) First class local wood (Hollock/Bonsum)

VENTILATING LOUVRE Providing 1st class local wood (Hollock/Bonsum)ventilating louvre in 50mm x 38mm size wooden frame with 150mm x 20mm slate made of 1st class local wood including fitting and fixing with nails and painting with two coats of kiricide oiling complete. c) First class local wood (Hollock/Bonsum)

DOORS Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) (b) With 1st class timber (Bonsum/ Sundi) (ii) 35 mm thick with panal inserts of 20mm thickness

GRILL Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer)

ALUMUNIUM WINDOWS Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (ii)6mm clear glass

PARTITION WALLS WITH DOORS Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels. (i)6mm thick glass panes and 12mm prelaminated board

PVC DOORS Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperatly. 24mm thick

(a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

d) Extra over item no (c) above for washing and cleaning ceiling and sloping roof.

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Wall painting with two coats of Acrylic emulsion paints approved brand and manufacture (Asian paints / Berger paints / ICI paints / J & N paints / Nerolac) on new surface to give an even shade after throughly brushing the surface free from morter dropping and oother foregin matter and sand paper smooth. a) Acrylic emlusion paint approved brand and manufacture ( Asian paints/ Berger paints/ICI paints/ Nerolac)

Extra over item no 13.4.1 above for painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with two coat s of acrylic emulsion exterior paint of approved brand of required shade thinning by adding water as per the specification of manufacture after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. c) Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac

Extra over item no.13.5.2 and 13.5.5 above for applying / finishing on celing and sloping roof.

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. b). With ready mixed "red-lead/ red oxide" primer.( White)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON STEEL AND OTHER METAL SURFACE Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

BLIND Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all level (B) Horizontal Blinds ii) 25 mm slim line blind

Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following. a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.. b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed. c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (ii)Super Ductile (SD) TMT reinforcement bars

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. a) In beams and joists with connecting plates/ angled cleat.

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles 0.4

b) M. S. Flats 0.3

c) M. S. bolts & nuts 0.5

STEEL RAILING Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

PLINTH PROTECTION Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

HEDGE PLANTING / EXTERNAL HEDGE Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed. (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta

SHRUB PLANTING Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed. (D) Thuja

WATERPROOFING & CHEMICAL TREATMENT SURFACE PREPARATION Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

WATERPROOFING COATING Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department comple

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels

Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

MISCELLANEOUS WORKS f).Cutting and clearing bushes consisting of plants and all sorts of bambooes including uprooting and removing as necessary and filling up the holes with earth,dressing,ramming etc. complete.

FIRE EXTINGUISHER Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

RETROFITTING WORKS Drilling 12mm dia x 100mm hole into the concrete surface using concrete hammer drill machine. Providing 10mm PGMS nozzles in a grid of 0.25m both and injecting with high strength cementitous grout- Cebex 100 /Sika Intraplast EP or equivalent prodsuct till completion and refusal of grout complete as per manufacturer's specifications. The nozzles are to be sealed off after grouting using Renderoc Plug/Sika -2 mortar or equivalent product injecting with high strength cementitious grout- Cebex 100 /Sika Intraplast EP or equivalent product of Fosroc complete as per the specifications of the manufacturer.

PIPING Supplying fitting and fixing pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed. C) CPVC pipe CPVC fittings ( Using SUPREME/PRINCE/SFMC/FUSION brand pipe ) i) 20mm (OD) diameter

ii) 25mm (OD) diameter

iii) 32mm diameter

iv) 40mm (OD) diameter

v) 50mm (OD) diameter

SINK COCK Supplying fitting and fixing Chrome plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Sona brand a) Sink cock upper/ lower spout 15mm

PILLER COCK Supplying and fitting fixing C.P. Piller cock of 15mm dia of approved brand as specified and directed. SONA make (a) Light type

STOP COCK Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (v) 40mm dia

SHOWER Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm

VALVE Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. b) 40 mm dia.

WATER TANK SINTAX WATER TANK - 1000Lt -Rs 7.8 /ltr

Auditorium, Library & Toilet SINTAX WATER TANK - 750Lt -Rs 7.8 /ltr_Security

BIB COCK Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Jaquare make (a)Continental /Clarion (i)Standard

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

INDIAN TYPE WATER CLOSET Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White i) Parryware make

PVC FLUSHING CISTERN Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White (i)Economy Single Flush (Cat No.C8090/C8055)

WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) (A) Parryware Make (a) White (ii) Vanice 620 x 485 x 850 (Cat. No.C841 P/R) (white/coloured)

MIRROR Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (ii) Single Bowl with Drain Board (400 x 200) Flat Edge - Glossy (Cat.No.C8537)

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (ii) Wall Soap tray (Cat. No.C9951)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware make a) White (i) Integrated EFS-Smart DC (Cat No.C8182) / Integrated EFS-Smart AC with power source (Cat No.C8195)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (i) Continental towel ring square (Cat.No. ACN-1121)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. (a) Jaquar make (i) Continental (Cat.No. ACN-1191N)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (b) Sona make (i) Bottle trap indian 32mm (Cat. No.BT-0751)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(v) 63 mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

(iv) 75 mm dia.

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110 mm x 90 mm

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

WASTE COUPLING Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

Wiring to a Light/Fan/Call Bell point with 2X1.5 sq.mm. PVC Insulated single core unsheathed industrial (Multistrand) cable F.R. conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 V olts ( Finolex/ RR Kabel or equivalent make as approved by the Deptt) in surface/recessed conduit wiring system with 20 mm dia 2 mm thick/heavy rigid IS : 9537 Part III conduit ( Berlia/AKG/Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) including 6 Amps flush Type Switch/bell push ( Anchor Penta/ Gold Medal / Kolor kany.kom /Havels or equivalent make as approved by the Deptt.) GI/MS switch board (ISI marked) with Phenolic laminated sheet cover ceiling rose ( Anchor penta / Gold medal / Kolor kany.kom / Havels or equivalent make as approved by the Deptt. Etc.complete. medium point upto 6mtr length

long point upto 10 mtr length

Wiring to a 5 pin 6 A plug point with 1.5 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.) in surface /recessed 2 mm thick/heavy rigid ISI marked IS : 9537 PART III rigid PVC conduit (( Berlia/AKG /Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 A flush type plug socket and 6 A F/T switch (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.), GI/MS switch board (ISI marked with phenolic laminated sheet cover including earth continuity with 1.5 sq.mm. cable to third point of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6 Mtr. Length

Wiring for 5/6 pin 16 A plug with 4 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.)in surface/ recessed conduit wiring system including 5/6 pin 16 A socket outlet (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.) and 16 A flush type switch (Anchor penta/Gold Medal/Kolor kany.kom/ Havels or equivalent make as approved by the deptt.) GI/MS switch board (ISI mark with Phenolic laminated sheet cover earth continuity with 2.5 sq. mm. cable to the third pin of the socket as required complete with 20 mm dia 2 mm thick heavy rigid ISI marked IS : 9537 Part III rigid PVC conduit (Berelia/AKG/ Precission /Presto Plast /Polycab/MW or equivalent make as approved by the Deptt.) Extra long point up to 15 meter length

Wiring for circuit wiring with PVC insulated Single core unsheated industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/recessed PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. with 3 X 1.5 sq.mm. P.V.C. insulated cable in 20 mm. dia rigid conduit

Wiring for drawing Sub-Main Line with PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/ recessed PVC 20 mm dia 2 mm thick heavy ISI marked IS 9537 Part III rigid PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 4 X 4 sq.mm. + earth continuity with 2X2.5 sq.mm.cable in 25 mm dia 2 mm thick/heavy rigid PVC IS : 9593 part III conduit.

With 4 X 6 sq. mm + earth continuity with 2 X 4 sq. mm cable in 32mm. Dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department 1-2 module type metal

8 module type metal

12 module type metal

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department 2 module

8 module

12 module

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door(IP-43) surface mounting vertical TPN MCB DB incorporated with bas- bar 125A, neutral link, earth bar and din rail etc fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt. (Richa, Bentec, Adhunic/ equivalent make) 8 way TPN (8+24) double door

12 way TPN (8+36) double door

Supply, installation & testing of copper plate earth station with 600mmX600mmX6mm heavy duty copper earth plate with necessary 40mm dia. G.I. medium duty watering pipe with G.I fittings such as socket, tee, elbow, nipple and 50mmX40mm G.I. reducing socket for funnel including locking arrangement with 300mmX300mmX6mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Supply with fitting & fixing 60mm dia 1830mm height integrated with acrylic diffuser, translucent top, bottom clear, black powder painted finish tubular pole. The pole is made of GI tube with GI cylindrical control box with service door and a circular base plate, precabled with control gear, 36W CFL lamp and suitable for operation on 240V 50Hz Single phase ac supply. The pole is to be fitted on 1:3:6 PCC pole foundation of size 300mmX300mmX1200mm with grouting nuts & bolts as specified & directed by the deptt. (Metal Coats make.) COBRA model or equivalent

Premium Model 1400 mm sweep (ORIENT /PSPO make)/Premium model 1400 mm sweep SS-390 Deco(havels make)

Supplying including fitting and fixing of following A.C. exhaust fan in the existing hole on the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the department. Power Flow 225mm sweep(ORIENT make)

Supplying including fitting and fixing of following A.C. wall fan in the existing hole on the wall of following sweeps with making necessary connections as approved by the deptt as required complete and as directed by the department ORIENT or equivalent USHA make Air Circulator wall fan 450 mm sweep Turbo force

Supplying installation of CYCLORAMA CUM SCREEN :- Providing and fixing cyclorama screen in plastic perforated material. The screen to be fixed on tubular framed made out of 35mm dia MS pipe.

Supplying installation of WINGS :- Providing and fixing cloth wings made out of black glazed cotton cloth fixed on 6mm thick commercial plywood fixed on one side of MS 50mm X 25 mm X 16 Gpipe wielded frame work. The pipe framework made out of 25mm x 50mm pipe. c/c 900 x 900 fixed with duly painted on both framework.

Supplying installation of FRILLS:- providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe a Size: 24000[AV] x2000 [H]

Supplying fitting fixing of ceiling fan regulator including connections etc complete as required

Supplying including installation, connection as approved by the deptt., testing and commissioning of JET PUMP SET(HORIZONTAL) complete as directed and specified by the deptt. 7.5 HP three phase centrifugal monoblock pump set (Crompton Greaves/Aquatic/CRI/V-Guard/Calma make) 2900 RPM A class insulation with Star Delta starter (Crompton Greaves/ Control & Switch Gear/BCH/L&T/ Siemens make) Fully Automatic citation

Supplying including installation, testing and commissioning of Air/Water cooled Diesel Generator set coupled to suitable alternator of 220/415v, AC, 1/3 phase 0.8 p.f. mounted on a 1)M.S. fabricated base frame. 2)M.S. fuel tank of required capacity., 3) Residual silencer, 4) standard control panel,5)Suitable batteries with lead, 6)first fill of lube oil, 7) Acoustic enclosure complete with all accessories as specified and directed by the deaprtment conforming to IS comprising the Technical Specification..as per manufacturer. (RANGE FROM 5VA TO 625 KVA) kirloskar green/bliss, leyland, volvo penta, perkinson, mahindra, greaves, escort engine and kirloskar, stamford,leroy somer alternator. 160-3-4040 x 1450 x 1900 3550 KG W/C

ELECTRIFICATION WORKS (Non-SOR Items) CENTRAL AIR CONDITIONING High side Work Supply Of Carrier Make 17.0 Tr (8.5 Tr x 2 ODU) Capacity Air-Cooled Floor Mounted Package Split Unit having SCROLL Comprressors and microprocessor-based Control

DUCTING WORKS: Supply, Fabrication and fixing of Galvanised sheet (GI) Ducting with M.S. Angle Flange, turning vanes, with proper duct sealing etc with RTV duct Sealant, complete with supports 24G

INSULATION Supply, Installation, Testing & Commissioning of Acoustic Insulation with 12 mm thick hi-density elastomeric foam

Supply Installation Testing Commission Of Duct Thermal Insulation with 9 mm Nytrel Rubber Insulation

25 mm thick Nytrel Rubber Insulation (UNDERDECK)

MACHINE INSTALLATION WORKS: Supply, Installation, Testing & Commissioning of Refrigerant Copper piping (Suction / Discharge) for proper functioning of Units. Refrigerant Copper Pipe insulated with manufacturer recommended thickness closed cell electrometric Nitrile Rubber interconnecting indoor & outdoor unit of various sizes as mentioned below 1 1/8" & 5/8." dia pipe

Supply, Installation, Testing & Commissioning of PVC Drain Piping of diameter as mentioned below insulated with 6mm thick superlon insulation 25mm dia pipe

Supply & Installation of Interconnecting Cable For Ductable & Package Ac 7 core X 1.5 Sqmm

Supply, Installation, Testing and commissioning Of Ductable, Placement Of Outdoor Unit, Nytrogen Flushing Leak Testing & Vaccuming Etc For 17.0 TR Package AC

Gas charging for 17.0 TR Package AC

M S CAT WALK for outdoor unit

Minor civil works for copper & drain pipe routing supporting hanging arrangement

GRILL/DIFFUSER WORKS Providing & fixing of Aluminium powder coated Linear Grill with Volume Control damperfor supply air

Providing & fixing of Aluminium powder coated Linear Grill/ Diffuser

Miscellaneous works Transportation Loading Unloading Lift Shifting & Placement of IDU/ODU (Guwahati to Tezpur)

160 KVA, 11/0.433 KV (Cu-Wdg) TRANSFORMER

LED PANEL LIGHTS: PCGLP ECO 2X2 4060/EQUIVALENT

SCINTILLATE LED PANEL SLIM SQUARE 6W/EQUIVALENT

SCINTILLATE LED PANEL SLIM SQUARE 12W/EQUIVALENT

PEARL LED SPOT 2W 6500 K RD/ EQUIVALENT

PEARL COB LED DOWN LIGHT 11W/EQUIVALENT

PEARL COB LED DOWN LIGHT 9W/EQUIVALENT

AELIUS LB LED LAMP 17W BC 6500 K/EQUIVALENT

AELIUS LXD LED LAMP 9W BC 6500 K/EQUIVALENT

INTENSO GX LED BATTEN 4 FEET 20W/EQUIVALENT

INTENSO GX LED BATTEN 2 FEET 12W/EQUIVALENT

SCINTILLATE LEDPANEL SLIM SQUARE 6W+ SURFACE MOUNTING BRACKET/EQUIVALENT

PCGLF T1 02 20 57/EQUIVALENT

PCGLB 02 06/EQUIVALENT

PCGLS T1 25 L/EQUIVALENT

LOAD AND ENERGY METER SECURITY, SUPERVISION AND LABOUR CHARGE AND DRAWING OF ST LINE PAYMENT TO BE GIVEN TO APDCL

AUDIO & VIDUAL (Non-SOR Items) Display and Video System 8500 lm, WXGA, projector Panasonic PT-DW830

Heavy Duty Projector Mount Kit /Cage Assembly Branded

Targa, 564 cm,222", 16:10, Matt White XT1000E, 220 V, with Draper, Inc. Targa - 116488U

HD Scaling Auto-Switcher & Extender Crestron HD-MD-300-C-E-B + FPG2

Flexible HDMI Patch cable , 6 Feet Kramer C-MHM/MHM-6

6ft VGA+Audio patch cord Kramer C-MGMA/MGMA-6

Audio System Wireless Handheld Microphone Set Beyerdynamic TG550 Vocal Set

Wireless Lapel Microphone Set Beyerdynamic TG 558 Presenter Set

Antenna System and Accessories Beyerdynamic Beyerdynamic

Gooseneck Stem Beyerdynamic Classis GM 314 S

Shock Mount Base Beyerdynamic ZSH 20

Multi Channel Audio DSP QSC Core110f

Compact digital mixer QSC TouchMix-16

Bulk accessories , M10 Eye Bolt Kit , Wire rope slings , D Shackle , Swaged assemblies etcs Std Accessories for Speakers

FOH and Delay Speakers QSC K10.2

Balcony speakers QSC K 8.2

Stage Monitor QSC K 8.2

Front fill Speakers QSC K 8.2

Yoke Mount Bracket QSC K 8 Yoke

Control System (Optional) iPad , 32 GB , Silver, 7th generation(2017) Apple 32GB, 2017

Control System Crestron CP3

Docking Station Launchport NA

Dual Band Wireless Access Point Cisco E2500

Installation and Cabling Audio Snake Cable , 8 Pair Belden 1512C

Microphone bulk cable Belden 1813A

14 AWG , Speaker Cable Belden 8473

Stereo Audio / Control Cable Belden 8723

RG58 Bulk Cable Belden 9201

Branded Bulk cables and connectors and Accessories Branded

Shielded Cat6 cable D-Link NCB-C6SGRYR-305

Standard AV rack with 600mm Width, 600 mm Outer Depth and 17U Height Valrack 17U

Installation and Commissioning Contingency charges Godrej Job 1

FURNITURE CHAIRS Auditorium :-Push Back Recliner Chair Model No- RZ-3 Type: Multiplex Chair Model Number: RZ-3 Size: Chair arm rest to arm rest: 21" standard Side Stand: 3mm iron Stripe with 6mmPly upholstered with Fabric Armrest (Handle): Plastic with Cup Holder. Leg: Chair leg will be fixed. Back Angle: 14 gauge. Chair seat: Auto Tip Up Inner material: Molded PU. Foam density: Seat: 50kgs/m3; Seat Back: 50kgs/m3; Inner structure: Ply frame in Seat and Back Tip UpMechanism: 14 gauge and 16 gauge with no disturbing noise. All the iron parts will be powder coated Upholstery fabric of Standard Quality

COMPUTER DESKTOP TABLE. Supply and fitting computer desktop table. Godrej Computer Table, Companion C-2

READING TABLE Supply and fitting reading table. Godrej Ideate 10 Seater (2700W x 1500D x 750H)

Supply & Fitting of sofa for lobby area ( L -SHAPE) Godrej Sofa Set, Parto Plus (3+1) Seater

ACCOUSTIC TREATMENT Supplying, fitting and fixing including Local Carriage of Tranquil Ecowood Perforated Wooden acoustical Pasel. Featured with excellent sound absorption & reverbaration control, Fire rated & low formaldehyde, Black flat backing.

Sri Ravi Kumar Gupta

Sri Babul Nath

M/S NATIONAL BUILDERS